KCMInit Error After Recent Upgrade: kdelibs-3.2.2-3

Hi.
After upgrading to kdelibs-3.2.2-3 and kdemultimedia-3.2.2-2, there is a KCMInit error every time KDE loads. This error did not occur prior to this with a fully up-to-date KDE environment.
Can anyone provide any help/assistance here?
Thanks.
Win

http://bbs.archlinux.org/viewtopic.php?t=4755

Similar Messages

HT1277 After recently upgrading my desktop I can no longer recieve emails from my IMAP account it continues to come up with password incorrect yet I have not changed it - HELP!

After recently upgrading to Maverick my desktop computer and all other devices will not recieve emails from my IMAP account, it keeps asking me for a password which has never been changed in 8yrs, please help as it was my business account from so long ago and I use it for general 'stuff' and my 'me' account for personal
Cheers

Since it is affecting all your devices also, try going to the e-mail web site and seeing if you can log in there. Who is the e-mail provider?
Try deleting the pass word from Applications/Utilities/Keychain Access.
If that doesn't work, try deleting and adding back the e-mail account.

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/

After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.

After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

Hello there, Kishoresaraogi.
The following Knowledge Base article provides some great steps to troubleshoot your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

After recent upgrade i lost the contacts icon on the screen

after recent upgrade i lost the contacts icon on the screen

Before doing a Reset (which will wipe out a whole lot of things that you have to reenter) check to make sure the Contacts app didn't simply get pushed to another page by the addition of the Newstand app to the first homescreen.

Lost all sounds except ringtone after recent upgrade

No sound except ringtone after recent upgrade followed by the upgrade fix. Since the ringtone was only affected I didn't notice immediately! If I plug in my headphones everything works. Unable to use volume buttons on side unless headphones are plugged in, the volume symbol with white dots doesn't even appear anymore. The volume control in itunes music only works when plugged into headphones otherwise it can't be adjusted. Worked with apple support tried everything include a restore to new still no go! It appears that a few people are having the same problem and seems weird that it happened after last upgrade!

If you are unable to adjust the volume without headphones even after restoring, then the iPhone thinks it's plugged into a dock or cable. This is the behavor that will happen if you plug your iPhone in to the car or iHome dock to play you music and sounds, but a docked connection will never play ringtones through the dock connection and headphones override that dock connection which is why your headphones work.
How does the phone think its connected to a dock? Well, this can happen if the charging port gets wet at some point or if some trauma happens in there like pushing the cable in when it doesnt fit, etc.
So it happens even after restoring what do I do? Service your iPhone. https://selfsolve.apple.com

Time Machine Backups after recent upgrade to Mountain Lion

Basically to keep a long story short - i need to take my computer in for repair tomorrow. I recently did an upgrade to Mountain Lion a day or two ago. I haven't done a Time Machine backup until today (a couple days after i upgraded to Mountain Lion) because i wanted to make sure that my previous TM backup (Snow Leopard 10.6.8) was the most up to date and best update that i could revert back to if i had any issues with Mountain Lion, or any application compatibility, etc etc.
I don't have any broken applications and it seems like Mountain Lion is running better than Snow Leopard. However, as i said - i'm taking my computer in for repair tomorrow, i would like to know that i have the most up to date Time Machine backup with the new Mountain Lion so that when i restore it back from my Time Machine backup after i get it back from repair, i won't have any issues with the migration, which could potentially lead me into more technicalities.
I have a 500GB Harddrive, with about 70GB left of free space....I did the initial backup prior to upgrading to Mountain Lion, and it upgraded 400+GB of info, now, since Mountain Lion - the first backup with Mountain Lion initially said 46GB - then it went down to 14GB by the time it was all said and done....so what exactly did it back up?
Did it back up all the necessary files to keep Mountain Lion running smoothly when i restore it back to the way it was after i get it back? Did it not back everything up that it needs to? Is it safe to erase my internal drive and do a clean installation so i can take it in, and not worry about not being able to migrate things back over or applications not working correctly?
When i get it back, i presume it will come with Mountain Lion back on it and i can just boot up into the Recovery Disk and restore it from a Time Machine backup that way, correct?
Thanks for the help.
- Jason

I received the same error and experienced the same issue that you have described but after performing a Time Capsule soft reset and then toggling the TM Off and then back On I was able issue a backup now and see my previous backups.
Here is the link to where I posted my fix; https://discussions.apple.com/message/19069543#19069543. Someone else had success using a different method. The only comment / complaint that I have since the ML OS X upgrade is that TM now takes at least 20 to 30 seconds before I can click/select a backup.
I hope this helps.

Program Error after recent itunes update - please help

I recently upgraded to the latest version of iTunes. Now it won't open. I have been through the revcommended options and still no joy.
The Program Error states "iTunes.exe has generated errors and will be closed by Windows. You will need to restart the program. An error log is being created."
I have removed the programs and reinstalled them as recommended and Still nothing! (I think ) I subsequently lost also my Pro version of Quick Time which I paid for.
I cant up date my iPod.
Please can you help me out?
It was working fine before upgrade...

I have removed the programs and reinstalled them as recommended and Still nothing! (I think ) I subsequently lost also my Pro version of Quick Time which I paid for.
is your QuickTime currently launching? if so, try retrieving your Pro Key using the information from the following document:
QuickTime Pro Key: Retrieving a lost key

Nulls in LOVs after recent upgrade to 2.2.1

I have created an adhoc reporting application.
I allow the user to enter whatever criteria they wish, therefore, some of the fields will be left null.
I have setup all these fields with LOVs in which the "Display null" set to "Yes" and have a "Null return value" of "%".
The reports themselves appear to work just fine.
However, when I click on the "Print" link in the "Navigation Bar" to get a printer friendly version of the report, I receive a "the page cannot be found".
I recently upgrade to APEX 2.2.1 and before this things were working just fine.
Help!!!

Raymond - What is the URL that gets requested in the Print link? Hover over it and you should see it. Check the Apache error log for details.
Scott

Report giving error after 10g upgrade

We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
**Starts**24-APR-2009 04:11:21
ORACLE error 3113 in FDPSTP
Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
APP-FND-01564: ORACLE error 1000 in AFPGRG
Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
Start of log messages from FND_FILE
End of log messages from FND_FILE
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
Contact your system administrator or support representative.
Shutting down Concurrent Manager : 24-APR-2009 04:11:51
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
hostdef extension doesn't exist
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
_ 3 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
I already increased the cursors from 700 to 900
How to fix it?

Hi,
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
I already increased the cursors from 700 to 900
How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
Regards,
Hussein

Wifi state not remembered across reboot after recent upgrade

After a recent upgrade, I noticed that the wireless network is always on after the computer boots (I use NetworkManager in gnome, which I always use to turn the wireless off). Before that, the wireless is on only if I left it on before I shutdown the computer last time.
Are there people who are having similar symptoms or know the cause?
(I have a Broadcom BCM43142 card and use the broadcom-wl driver)

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

Finding: Incorrect SQL throws a random error (after 2005 upgrade)

Hi I thought that I would share an experience that we found after upgrading a system to 2005:
Due to the upgrade of SBO, one of our addons didn't work properly after upgrading it to 2005. Basically the code would break in random places (while stepping through it in the Development Environment).
After some time we identified the error was being thrown because a sql query we were using was incorrect due to the changing of the DB structure in the upgrade. The weird thing was that it didn't throw an error at rs.DoQuery(query) but actually would step into the recordset and then the addon would suddenly stop working - hence the reason it took a while to identify it was the sql causing the problem.
Anyway updating the sql fixed the problem, but if anyone else is finding strange behavior whilst trying to identify why an addon might stop working after an upgrade, you should check any sql being used is still correct....
Daniel

The first versions of SBO2005A SDK (PL00 to PL04) was the say the least VERY buggy... PL05,06 and now 07 seem to get things under control... Any rampup version of 2005 should at least get up PL05 ASAP... I didnt have many problem with the SQL, but "Server produced an error was a very common error".. my problem was primarily in matrixes (add/remove of lines), itemevent (pval internal COM error) and the dangerouse UserTable error due to currupted object in it....

Jco call rfc throws error after WAS upgrade sp15

Hi all.
When 2 days ago, our WAS engine version is sp14.
And we have one application using jco library to connect to SAP R/3. It works well.
After we upgrade WAS to sp15.
This function throws out the error.
Umrechnungsfaktor konnte nicht bestimmt werden
Is there anybody can help me ? Its very urgent !

Hi
A)Go to adming page http://<localhost>:<port> >>click Web Dynpro >>Content admin >> create, maintain, test Jco and also you can Test the SLD connection too
B)If you are using any JDBC driver,Check your JDBC driver is registered. or else you have register it
1. Start the Visual Admin tool
2. In the tab Cluster, open the node of the server you want to check.
3. Open the node Services under the server you want to check.
4. Click on the entry ClassLoader Viewer under Services. 5. The components are displayed in the right window. Open the node Applications in the right window.
6. Look for the entry sap.com/com.sapportals.connectors.database and click on it.
Under sap.com/com.sapportals.connectors.database, your JDBC driver should be available
Cheers
Jawahar Govindaraj
PS: Reward points

KCMInit Error After Recent Upgrade: kdelibs-3.2.2-3

Similar Messages

Maybe you are looking for