KDC policy rejects request (12) - TGT BASED NOT ALLOWED
Hi,
I need to change the kerberos password for the user. Since I'm not able
to find any open source project doing this, I'm looking forward how is hard to
implement it.
But I'm stuck on the first message, while getting the kadmin/admin ticket:
KDC policy rejects request (12) - TGT BASED NOT ALLOWED
obviously because it has Attributes: DISALLOW_TGT_BASED.
How to get this ticket?
If you know another way to implement a kind of kadmin interface
(without calling C code) I'll be happy! ;-)
Ok so on investigation I can see that my 3am hackjob was worse than I thought :|
I can see that above I have 2 different crypto maps where I thought I had combined them into one. I have now changed
crypto map rtp 10 ipsec-isakmp
set peer [source]
set transform-set MY-SET
set pfs group2
match address 111
to
crypto map clientmap 10 ipsec-isakmp
set peer [source]
set transform-set MY-SET
set pfs group2
match address 111
Still getting the same problem so I'll keep investigating but if anything sticks out let me know
b
Similar Messages
-
Once in a while i get the error
Event ID 6463
The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.
This also happens when i restart the timer service.
I already cleared the SharePoint cache (xml's) but no success with that.
Environment is
SharePoint 2013 SP1 + CU Dec 2014This is a brand new SP13 with SP1 installation after binaries installation i also installed Dec 2014 CU and then created the SP farm.
The Apppool/Timer account is member of WSS_ADMIN_WPG.
Issue can be reproduced with restarting SharePoint Timer Service.
Hereby the Process Monitor output. Hence i filtered it on NOT SUCCESS and Path contains the word UPGRADE
11:37:57,4244851 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\UpgradeLogLevelOverride
NAME NOT FOUND Length: 144
11:37:57,6632057 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,6632889 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7140763 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7141089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313403 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:59,2026527 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:37:59,2109400 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3534303 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3537846 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3594290 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3597316 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3653094 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3656118 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144 -
I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
at System.Data.SqlClient.SqlConnection..ctor()
at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
at System.Diagnostics.TraceSource.TraceInformation(String message)
at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
<serviceAuthorization impersonateCallerForAllOperations="true"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="FRB.AllowImpersonate">
<clientCredentials>
<windows allowedImpersonationLevel="Impersonation"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
</behaviors>
<bindings>
<wsHttpBinding>
<binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
allowCookies="false">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<reliableSession ordered="true" inactivityTimeout="00:10:00"
enabled="false" />
<security mode="Message">
<transport clientCredentialType="Windows" proxyCredentialType="None"
realm="" />
<message clientCredentialType="Windows" negotiateServiceCredential="true"
algorithmSuite="Default" />
</security>
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
name="WSHttpBinding_IAdminService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
</client>
</system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
<appSettings>
<!-- whatever goes here -->
</appSettings>
<!-- connection string section -->
<connectionStrings>
<add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
<add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
<add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
<!-- FRB.Diagnostics logging section -->
<FRB.Diagnostics>
<sqlTraceListeners>
<sqlTraceListener name="sqlTraceListenerSettings"
connectionStringName="log"
commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
commandType="Text">
<parameters>
<parameter name="@Source" propertyToken="{Source}"/>
<parameter name="@ActivityId" propertyToken="{ActivityId}"/>
<parameter name="@ProcessId" propertyToken="{ProcessId}"/>
<parameter name="@ThreadId" propertyToken="{ThreadId}"/>
<parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
<parameter name="@Message" propertyToken="{Message}"/>
<parameter name="@Timestamp" propertyToken="{DateTime}"/>
<!-- <parameter name="@UserId" propertyToken="{WindowsIdentity}"/> -->
</parameters>
</sqlTraceListener>
</sqlTraceListeners>
<smtpTraceListeners>
<smtpTraceListener name="smtpTraceListenerSettings"
host="vssmtp"
port="25"
from="[email protected]"
to="[email protected]"
subject="AdminService Logging Event: {EventType}, {MachineName}"
body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
</smtpTraceListeners>
</FRB.Diagnostics>
<!-- System.Diagnostics logging section -->
<system.diagnostics>
<sources>
<source name="FRB.EC.AdminService" switchValue="All">
<listeners>
<clear/>
<add name="ods"/>
<add name="smtp"/>
<add name="sql"/>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
<listeners>
<add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
</listeners>
</source>
</sources>
<sharedListeners>
<!-- OutputDebugStringTraceListener -->
<add name="ods"
type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
<!-- SqlTraceListener -->
<add name="sql"
type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
initializeData="sqlTraceListenerSettings"
traceOutputOptions="Timestamp"/>
<!-- SmtpTraceListener -->
<add name="smtp"
type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
initializeData="smtpTraceListenerSettings">
<filter type="System.Diagnostics.EventTypeFilter"
initializeData="Error"/>
</add>
</sharedListeners>
<trace autoflush="true"/>
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0">
</compilation>
<roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
</system.web>
<system.serviceModel>
<services>
<service name="FRB.EC.AdminService.AdminService"
behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
<!-- Service Endpoints -->
<endpoint address="" binding="wsHttpBinding"
bindingConfiguration="wsHttpEndpointBinding"
contract="FRB.EC.AdminService.IAdminService">
<!--
Upon deployment, the following identity element should be removed or replaced to reflect the
identity under which the deployed service runs.
If removed, WCF will infer an appropriate identity automatically.
-->
<identity>
<dns value="localhost"/>
</identity>
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="wsHttpEndpointBinding"
maxBufferPoolSize="2147483647"
maxReceivedMessageSize="500000000">
<readerQuotas maxDepth="2147483647"
maxStringContentLength="2147483647"
maxArrayLength="2147483647"
maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647"/>
<security>
<message clientCredentialType="Windows"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="FRB.EC.AdminService.AdminServiceBehavior">
<!-- To avoid disclosing metadata information, set the value below to false and
remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true.
Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="true"/>
<serviceCredentials>
</serviceCredentials>
<!--<serviceAuthorization principalPermissionMode="UseAspNetRoles"
roleProviderName="AspNetWindowsTokenRoleProvider"/>-->
<serviceAuthorization principalPermissionMode="UseWindowsGroups"
impersonateCallerForAllOperations="true"/>
</behavior>
<behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
<!-- To avoid disclosing metadata information, set the value below to false and
remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true.
Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
<serviceCredentials>
<clientCertificate>
<authentication certificateValidationMode="PeerTrust"/>
<!--<authentication certificateValidationMode="Custom" customCertificateValidatorType="DataFactionServices.FRBX509CertificateValidator"/>-->
</clientCertificate>
<serviceCertificate findValue="WCfServer"
storeLocation="LocalMachine"
storeName="My" x509FindType="FindBySubjectName"/>
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
</configuration>
Thanks for any help.
NealI think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
// Above is related to the WCFLOG SQL Diagnostics Trace
// If you get error here an inner exception "requested registry access is not allowed"
// inside exception "type initializer for System.Data.SqlClient.SqlConnection"
// then make sure you have impersonation enabled in your client.
// See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
<endpointBehaviors>
<behavior name="FRB.AllowImpersonate ">
<clientCredentials>
<windows allowedImpersonationLevel="Impersonation"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
<client>
<endpoint address="http://localhost:4998/AdminService.svc"
behaviorConfiguration="FRB.AllowImpersonate"
binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_IAdminService"
contract="svcRef.IAdminService"
name="WSHttpBinding_IAdminService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
</client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
try
_connection = new SqlConnection(connectionString);
// Above is related to the WCFLOG SQL Diagnostics Trace
// If you get error here an inner exception "requested registry access is not allowed"
// inside exception "type initializer for System.Data.SqlClient.SqlConnection"
// then make sure you have impersonation enabled in your client.
// See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
catch (Exception ex)
if (ex.ToString().Contains("The type initializer for"))
throw new System.ApplicationException(@"
Your client app <endpoint> must be cofigured have a
'behaviorConfiguration' attribute like this:
behaviorConfiguration='FRB.AllowImpersonate'
that points back to a behavior that has this syntax:
<behavior name='FRB.AllowImpersonate'>
<clientCredentials>
<windows allowedImpersonationLevel='Impersonation'/>
</clientCredentials>
</behavior>
", ex);
else
throw ex;
_command = _connection.CreateCommand();
_command.CommandText = commandText;
_command.CommandType = commandType;
// TODO _command.CommandTimeout = ;
Neal -
Sharepoint and SSRS integration Error Requested registry access is not allowed.
I have integrated SSRS with sharepoint foundation 2010, it was running fine but suddenly its starts giving me error as -
"An unexpected error occurred while connecting to the report server. Verify that the Reporting Services Service Application mapped to this web application is available OR the report server is available
and configured for SharePoint Integrated mode. --> The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. --->
Microsoft.ReportingServices.Library.ReportServerDisabledException: The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted
content. ---> System.Security.SecurityException: Requested registry access is not allowed."
Now i am not able to read reports or cant access all database options in sharepoint,it says
registry access is not allowed
I tried to reset encryption key and allowed all access to registry keys buts its giving same error .
Please suggest me what should i do now, i stuck here...Hi Bhagyashri,
From your description, there have two questions in the environment:
"Requested registry access is not allowed" while access SharePoint sites
and "The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database" while viewing reports
For the first issue, the cause is the SharePoint web service account can't access some registry keys.
For the second issue, the cause is that the report database was restored from another server, and the encryption key was not restored correctly.
To fix the issue, please:
Follow "solutions" in this article
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx to fix "Requested registry access is not allowed"
Restore the encryption key again, or please delete the key and then reset every credential setting in SSRS data source connection
Thanks,
Jinchun Chen
Jinchun Chen(JC)
TechNet Community Support -
I am trying to email from my iphone and the message comes up it is rejected by server, it does not allow relaying. I am receiving emails ok. How do I fix this
What's the model number of your Lexmark printer?
-
Error at connect :Requested registry access is not allowed
I have a Windows service running as a domain admin connecting with Client 10.2.0.100.
My connection string look as follows :
user id=xxx;data source=xxx;password=xxx;Statement Cache Size=30;Min Pool size=0
This error (Requested registry access is not allowed) only occurs sometimes.
Maybe after the service has been idle for a while???
Thanks in advance,
PhilippeProblem was caused by corrupted user profile. Removing current profile and reinstalling SCORCH solved.
Egils Zonde from Technet -
Requested registry access is not allowed when opening Infopath Forms on Sharepoint 2013
Hello Technet Community.
I hope this will help anybody out there that experienced this problem after patching Sharepoint 2013.
I have a distributed 3-tier Sharepoint 2013 environment. All of a sudden, after the last round of patched released on 7-Jul-2014, opening Infopath forms would throw a "something went wrong" error.
Looking at the ULS logs, you would see the error "Requested registry access is not allowed.".
I have looked at tons of posts on different blogs, and all pointed out that you need to grant "read" permissions to the application pool user (in my case a service account in AD) to the registry key (and subkeys):
HLKM/Software/Office Server/15.0
That indeed works, but it is not the proper way to do it. You should grant "read" permissions to this local group:
WSS_WPG
And special permissions to this local group:
WSS_ADMIN_WPG
Here is a snapshot of the special permissions needed
By the way, the WSS_PWG local group contains the app pool service account.
I do not know why patching Sharepoint removed these permissions from the registry keys, but oh well...
Anyway, Sharepoint is now happy and Infopath forms work as expected.
ClaudioCheck if your service account or infopath service account has access to server and specially registry
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx
To solve the issue, please follow these steps:
Use the Process Monitor to monitor the registry, once you get the following ACCESS DENIED message(You can filter the result with “Result contains Access Denied”):
Date & Time: <date time>
Event Class: Registry
Operation: RegOpenKey
Result: ACCESS DENIED
Path: HKLM\SOFTWARE\Microsoft\Office Server\14.0
TID: 2020
Duration: 0.0000297
Desired Access: Read
Open Registry Editor (Start > Run, type regedit)
Open key: HKLM\SOFTWARE\Microsoft\Office Server\14.0(got from Process Monitor from step 1)
Assign the SharePoint Timer Service account the Read permission to this key
One can open registry using regedit command. In Registery editor go to
HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\15\Secure\FarmAdmin
Check central administration app pool Identity have permission on FarmAdmin. Permission can be check on right clicking FarmAdmin --> Permissions.
If this helped you resolve your issue, please mark it Answered -
ECP not connecting with Edge Tranpost role ("Requested registry access is not allowed,". )
I installed and configured an Edge Transport server.
In ECP under servers if I click to access the Edge Transport server I get a warning message pop up that says "An error occurred while accessing the registry on the server "FQDN". The error that occurred is: "Requested registry access is
not allowed,".
If I answer "Okay" I get the standard info and am allowed to enter a product key which did save. Operation appears normal and mail-flow is functioning.
Any help is much obliged.Hi,
Agree with Amit Tank, we can use ECP to manage Edge Transport server. However, Edge Transport does not come with a separate EAC or ECP component, and we can manage Edge Transport from the Exchange 2013 SP1 ECP which is CAS 2013 server.
Thanks,
Angela Shi
TechNet Community Support -
Error during Upgrade advisor Progress "Requested registry access is not allowed. (mscorlib)"
Hello ,
I have installed " SQL Server 2012 Upgrade Advisor" successfully on my local system. A Successfull connection was establised to SQL Server insatnce on Remote Server through Upgrade Advisor
,On click of Run below error is raised
===================================
Requested registry access is not allowed. (mscorlib)
Program Location:
at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)Yes instance and upgrade advisor version are same (64 bit ).edition of SQL Server is Enterprise Edition (64-bit)
Upgrading from SQL Server 2008 to SQL server 2012.
1) provided with Server Name and component
SQL SERVER was Checked.
2) Clicked on Next , Instance Name and SQL Server Authentication
was selected.
3) Login Ceredentials provided and Clicked on Next.
4) Only one Database to analyze was checked and Clicked Next.
5) On Click of Run below error occured.
On click of Advance Information of error >> ALL Messages :
===================================
Requested registry access is not allowed. (mscorlib)
Program Location:
at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)
Log file Error Message :
12/01/2014 17:17:47 UA <Error>System.Security.SecurityException: Requested registry access is not allowed.
at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)
The Zone of the assembly that failed was:
MyComputer</Error> -
Error on powershell: "Requested registry access is not allowed"
Hi!
Suddenly after reboot all runbooks fail on all .net activities. I tried even an empty powershell single activity, and that too fails with: "Requested registry access is not allowed"
Please help!
Egils Zonde from TechnetProblem was caused by corrupted user profile. Removing current profile and reinstalling SCORCH solved.
Egils Zonde from Technet -
After Feb 2015 CU viewing list items results in error : requested registry access is not allowed
Hello All,
We recently (Monday) updated our farm to the feb 2015 CU. Since then we have been getting calls in from users that cannot access list items. They receive a correlation error. Looking at the logs the correlation error points to a critical
error: "Requested registry access is not allowed"
Doing some googling, others have seen this error but it is usually associated with managed accounts.
Has anyone else encountered this issue/error? Have you found a solution?
Thanks for your help
environment: SharePoint 2013 enterprise : 6 farm servers : OWA : project server : SQL 2012 always on backendThis would be the service account running the Web Application failing to access the registry key(s). What you should do is set up
Process Monitor to look at Registry keys, and look for ACCESS DENIED.
One thing you could just try out would be to run:
Initialize-SPResourceSecurity
Also, do you mean the March 2015 CU?
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
TS3899 Rejected by server because does not allow relaying ?
Was not able to send an email or respond to an email. Popped up saying "rejected by server because does not allow relaying".
What quite often fixes it so to try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can send emails from the account
-
Rejected by server becuase does not allow relaying
rejected by server because it does not alloe relaying ???????
This message generally means the SMTP server for your email provider either does not allow you to send mail off their network, or you have not completed setup of the server with authentication. Re-check your settings for the account from your email provider and make any necessary adjustments to the setup on the phone.
-
Requested registry access is not allowed
I have inherited a project from someone who no longer works here. I see how the debugger works in Visual Studio.
My computer has Visual Studio 2012 running on Windows 7. The computer where are application was created runs Visual Studio 2010 on Windows XP.
The program runs in debug mode on the XP computer without any problems.
On my computer it always gets an exception at the point where the registry is accessed.
I have executed the following:
1. Download and install the SubInACL utility.
2.Create a new text file named fix_registry_permissions.cmd and add the following text to it and save it.
cd /d "%programfiles%\Windows Resource Kits\Tools" subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f subinacl /subdirectories
%windir%\*.* /grant=administrators=f /grant=system=f
3. Run the file by double-clicking on it.
I have also executed:
Press WINDOW+R to open the Run window, type "regedit" (no quotes) and press ENTER to execute. If a UAC dialog appears choose Yes to open
the Registry Editor with elevated priveledges.
2. Navigate to HKEY_CURRENT_USER\Software\Classes.
3. Create a new key named ".vbproj"
4. Run VS 2010 as an administrator.
5. Try creating a VB project.
Neither fix works for me.the project is using C#, WPF. The project can be built successfully and does run on any computer. The only time I get the registry error is when I try to use the debug feature. It always jumps to the exception.
The code is:
#region read data folder location from registry
try
regKey = hklm.OpenSubKey("Software\\ThermoGenesis\\XpressTRAK\\Data",
true);
if (regKey.GetValue("DataFolderPath")
== null)
GVariables.dataFolderDir = System.IO.Directory.GetParent(
System.Reflection.Assembly.GetExecutingAssembly().Location).ToString();
//create the key
regKey.SetValue("DataFolderPath",
GVariables.dataFolderDir);
else
GVariables.dataFolderDir =
Convert.ToString(
regKey.GetValue("DataFolderPath"));
catch (Exception
ex)
MessageBox.Show(ex.Message,
GVariables.msgCaption);
if (regKey !=
null)
regKey.Close();
return
false;
#endregion -
Cannot Send Mail A copy ....was rejected .. It does not allow relaying
Same settings on iPhone 4s as on my iPad
Figured it out. Settings were same on top level but digging into outgoing server setting had to use ssl and set a password. Works now
Maybe you are looking for
-
I have a PC. My hard drive would not boot. I installed a new boot drive and a factory clean install of Windows XP Pro. The old boot drive is now installed as a backup. I need to sync my iTouch but it's bascially a new computer. I have the old backup
-
Disk Utility from local SSD and Recovery Partition disagree
Hi, When I run Disk Repair from my 15" MBP's SSD, I get this: Verifying volume "Macintosh HD"Verifying storage systemChecking volumedisk0s2: Scan for Volume Headersdisk0s2: Scan for Disk LabelsLogical Volume Group B133BE17-6899-41E8-B2B2-342B022BB2CC
-
Web Service - Invoke Web Service not trapping errors
Greetings All: I am having an issue trying to trap errors coming out of the Invoke Web Service service. I have a Fault Route set up for SYSTEM EXCEPTION, and direct it to an ExecuteScript service. If the process I am developing fails, it appears to l
-
Hello all, I'm having issues with a recently purchased movie from the iStore. I have a iBook g3 600mhz and a iPod video(black). I purchased the movie, Open Waters, downloaded it into iTunes then onto my iPod. The movie plays like its streaming and do
-
I know there is a simple answer to this, but I cannot find it. The code I attached to this post yields a security error of the following nature: SecurityError: Error #2179: The Clipboard.generalClipboard object may only be read while processing a fla