KDE 4.10 - Problems with Plastik window theme

There seems to be several problems with the Plastik window decoration theme in KDE 4.10:
* When switching between windows the window decoration flickers several times and takes about a second to update the colours
* The font baseline is too high
* The button positions are messed up
It does not seem to affect any other themes.
It has worked perfectly in all previous 4.x releases.

There is a bug report about this:
https://bugs.kde.org/show_bug.cgi?id=314532

Similar Messages

  • I'm not able to download Itunes.  I keep getting this Apple Software Update message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your package vendor"

    Not able to access Itunes store anymore.  Just quit working for no reason.  I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor".  Not sure what this message means.  Am I suppose to contact Apple ?  What is meant by package vendor ?

    Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm.  So will have to wait

  • Error message on window 7 for install iTune and iCloud!!!"There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

    Hi,
    I just try to install the setup download from apple website for iTune and iCloud.
    During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
    Anyone can help on this??????
    Thanks.
    Justin

    I have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater.  The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.

  • I cannot install itunes to my windows 7 computer. I've deleted everthing apple related (in order recommended). I get a message each time that states "There is a problem with this windows installer package. etc.. What should I do?

    I've also spent hours on the phone with both apple and windows technical support specialists. This is very clearly not a windows issue. I've given my computer a clean boot, disable my antivirus and firewall, and then attempted to download (yes, from apple's website). I've delete all of the programs (in the necessary order) and then attempted reinstalling with absolutely no luck. I'm starting to think that there's absolutely nothing I will be able to do. I've also never been able to fine "apple software updater or apple software update on my computer, which is particularly odd because I haven't found a post in this community that answers that question. No, "apple software update" cannot be found by accessing the start menu or anything in the "C drive". Apple software update is also never included in the itunes download package that I get from apple's website (the others, such as bonjour, apple application support, and apple mobile support are). No matter what I do, I always get the mesage at the end of the download, "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    This may or may not be related to the "apple software update" issue.

    Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm.  So will have to wait

  • Problems with the windows update site in 32-bit Vista Business

    Hi Everyone,
    I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
    P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.

    hello
    You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
    http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&... 
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2

     I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
    1. Message appears telling me that the drivers of the display  has been restored crash.
    2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
    3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its  is not compatible with the system, and do not work.
    What is the solution؟

    Hi, MUJAHED
    I have a few questions for clarification I would like to ask about your first two issues:
    1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
    2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
    As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • 'There is a problem with this Windows installer package'

    iTunes won't install. I keep getting the following message midway through installation;
    'There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
    It all happened a while ago when iTunes tried to update, it crashed straight after initiating the download so I closed it down. Upon opening iTunes again it would just keep crashing so I decided to uninstall iTunes altogether and reinstall the latest version.
    Now I'm met with this message every time I try and install the **** thing, I followed the series of troubleshooting like uninstalling all the iTunes files and quicktime ones then trying to reinstall, I tried clearing my AppData Temp folder then reset and tried again and got the same error, then I tried running the windows clean up utility (Which when I ran I found iTunes wasn't present).
    I'm completely at a loss can ANYONE please help me? I assume theres a corrupted file somewhere from the original crash but the case is where and what can I do to fix it?
    Any help would be greatly appreciated,
    Thanks.

    If all the basics have failed try deep cleaning the registry and by that I mean
    using regedit to "find" every iTunes ,quicktime etc key and reference and delete them this will then give you a machine that has never seen iTunes.
    Why do this because iTunes and the other attendant programs leave legion of entries that are not removed by any cleaner I have found .The repeated updating and or installing of iTunes creates this detritus that has confused an installation usually the point at which you post here.This is nothing new in Windows other software vendors have realised this problem and for instance Norton
    have a tool that removes all evidence of their AV installation in fact you run it twice to be 100% when having problems with an installation.Until Apple produce a similar tool this is the only way I have come across to solve the multiple
    problems users find However to be fair millions of users update itunes every week and have no problems so the chances of it being Apple's fault are very very slim it is unfortunately likely to be an unfortunate combination of issues as mentioned above
    BUT if you do not understand regedit do not attempt it get someone who does to help

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

  • After updating to itunes 10 i now get an error message saying there is a problem with the windows insaller package - I have tried all the suggestions but nothing works for me - have I lost all my itunes forever?

    After updating to itunes 10 I now get an error message that says there is a problem with the windows installer package. I have tried all the things that others suggested but cannot download itunes at all now. Have I lost itunes forever?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • There is a problem with this Windows Installer Package. No apple software installed to try uninstall/repair.

    Trying to install latest version of 64bit Itunes. I'm getting the error message "There is a problem with this Windows install package. A program required for this install to complete could not be run. Contact your support personnel or package vendor". All the solutions require an uninistall of all apple software, which i have done, with no success. Apple software update is not in programs and features to uninstall. I've also tried install just safari, and I get the same error.
    I've run cCleaner to fix any registery issues which hasn't worked either.
    Any help appreciated.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • When i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation i

    when i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation itunes on my pc completely.

    Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm.  So will have to wait

  • "There is a problem with this Windows Installer package. help pls!

    Hello,
    This is my first time using itunes! can someone help me please.
    When i try to install the itunes, it prompted me a message that says
    "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    And i called up APPLE and they ask me to use the 6-steps uninstall mathod but i couldnt find any apple software update to uninstall so i ignore. and i tried downloading again and again but it stil doesnt works.
    Can someone guide me how to install itunes?
    Thank you so much

    OK, so you don't have a working iTunes.
    What I would like to do now is to try installing each iTunes component separately.
    First uninstall the 5 iTunes programs that you have installed.
    You should have iTunesSetup.exe saved in a folder on your PC, probably in the downloads folder. If not download and save it now.
    Open the folder containing iTunessetup.exe with explorer.
    Next open notepad and copy the following 3 lines into it.
    md temp
    itunessetup /extract temp
    pause
    Save the file as extract.bat into the same folder that contains the itunes installer.
    Open the downloads folder and you should find the extract file that you saved. Double click on it and a black window will open telling you what it is doing. When its finished, press any key to continue.
    You should find that a folder called temp has been created containing all the itunes msi files.
    Install in this order by double clicking on them:
    Apple Application Support
    Bonjour
    Apple Mobile Device Support
    Apple Software Update
    Quicktime
    iTunes
    If one of the installs fails, stop and post the error message in full. I am hoping that by doing this separately we will get a better error message.

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

    I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had.  I uninstalled all of itunes, and now I'm getting the error  message "there is a problem with this windows installer package.  Aprogram required for this install to complete could not be run.
    Help!  I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
    Thanks!

    I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

Maybe you are looking for

  • Error  in document number while posting the material

    Dear experts while posting the stock  MB1C  for the material  the error  is  " incorrect doc number $  1 .select doc number between   800000100  and 800000199. how to  correct  this  error. where  to check this  number ranges  of  document. Thanks  &

  • Partitioning an ext. HD for use with Time Machine HFS+/FAT32

    Hi, I hope that this question is not already answered somewhere - I did a couple of searches but couldn't find the answers I need. I'm setting up an external LaCie 500GB HD (USB 2.0) for a friend, in order to use it for Time Machine backups (one part

  • Zerofree: Shrinking ARCH guest VMDK--'remount the root file-system'?

    Hi! [using ZEROFREE] Getting great results with and extra ARCH install running as a VMDK in Workstation. REALLY need tips on shrinking the VMDK. obviously have deleted unneeded files and now rather urgently need to learn what's eluding me so far. 1)

  • Changing LOV's  table-field size

    Hi, I'm using Jdeveloper 11g. Knowing that the tag below is used in LOV, Now I need to know how to change the LOV's table-field sizes? (I'm using the model-based LOV, and it's reading the attributes from the view object) <af:inputListOfValues model="

  • Script to run only if group exists.

    Hello, I've done a few searches in the forums, but didn't locate what I was looking for.  Also tried Google with no luck.  Anyway, it's probably a simple request, but I can't seem to get it to work for anything.  What I'm looking for is an if stateme