KDE 4.3 and superkaramba plasmoids

Hello!
I have just 1 issue with KDE 4.3: I can't seem to be able to install superkaramba-widgets as plasmoids. They don't seem to be installed at all, although I complete the setup-process via right-click on desktop -> install new mini-program from file -> superkaramba-thingy etc... But it will never show up and in my .kde4-folder nothing new will be created.
Can you confirm this? Or does it work for you? It would be great if you could check this out...
Thanks in advance!

OK, a user here http://forum.ubuntuusers.de/post/2106871/ told me the command:
plasmapkg --type=superkaramba -i Datei_Name.skz
It works But still, I hope this will be fixed in the next update.

Similar Messages

Mixing themes KDE 4.1 and 4.2

i run KDE 4.2 beta and like it. but there are some stuff i liked more in 4.1 and 4.0 (older versions of some plasmoids and the oxygen theme)
is there way to install them in parallel as oxygen_1 etc ?

Nice question - I also think that 4.2 kicks and can't wait for it to be released proper on 27.1.
In particular I am missing stock quote plasmoids available from aur for 4.1...

KDE 4.2 and dual monitor setup

Is there any way to make KDE 4.2 understand which monitor is my primary one?
It acts like mye left monitor(my tv) is the default monitor, but my right monitor is the which is the primary one.
Last edited by Roberth (2009-01-29 23:12:19)

I switched mine around and KDE followed it. I'm using Twinview with the proprietary drivers, so maybe that makes a difference.
Here's my xorg.conf for a GeForce 7300 SE, in case it helps.
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "Monitor0"
Vendorname "Unknown"
Modelname "Acer AL1916"
Horizsync 30.0 - 83.0
Vertrefresh 55.0 - 75.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP: nvidia-auto-select +1280+0"
Defaultdepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Extensions"
Option "Composite" "1"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Screen0" 0 0
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "IgnoreDisplayDevices" "TV"
Option "Coolbits" "1"
Option "RandRRotation" "1"
Option "AddARGBGLXVisuals" "1"
Option "TripleBuffer" "0"
Option "DynamicTwinView" "1"
Option "NoLogo" "True"
EndSection
Section "Device"
Identifier "Videocard0"
Option "IgnoreDisplayDevices" "TV"
Option "Coolbits" "1"
Option "RandRRotation" "1"
Option "AddARGBGLXVisuals" "1"
Option "TripleBuffer" "0"
Option "DynamicTwinView" "1"
Vendorname "NVIDIA Corporation"
Boardname "GeForce 7300 SE/7200 GS"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection

[SOLVED] kde 4.6 and Udisks mounting problems with Dolphin

Hello,
I have a problem with Dolphin in KDE 4.6 where it displays my non-Arch partitions (a / and /home used for Opensuse) as well as a CD-Rom or usb if inserted, but registers an error when I click on the device/partition icon. Specifically, I get the following error displayed at the bottom of Dolphin:
An error occurred while accessing Hard Drive, the system responded: org.freedesktop.UDisks.Error.Failed: Error creating mount point: No such file or directory.
Because of this error, I am unable to mount usb pendrives, access CDs, or access the non-Arch partitions. I'm not sure if this is a KDE error or if it related to Arch as I never encountered this error running KDE 4.6 in Opensuse.
My daemons running in /etc/rc.conf
DAEMONS=(syslog-ng dbus networkmanager netfs crond alsa kdm)
My /etc/fstab
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sda1 / ext4 defaults,noatime 0 1
/dev/sda5 swap swap defaults 0 0
/dev/sda6 /home ext4 defaults,noatime 0 1
tmpfs /tmp tmpfs defaults,nodev,nosuid,mode=1777 0 0
tmpfs /var/lock tmpfs defaults,nodev,nosuid,noexec,mode=1777,size=10M 0 0
tmpfs /var/run tmpfs defaults,nodev,nosuid,noexec,mode=0755,size=10M 0 0
Now, I don't have hal running as a daemon as I have read that it is no longer needed in KDE 4.6. Similarly, I don't have my CD-Rom drive mounted as I read in the udev wiki that Udisks automatically mounts devices and partitions. The wiki also indicates that Udisks is supposed to require little configuration.
I've searched the forum and Google, and I have not been able to find any information documenting a Dolphin and UDisks mounting error in KDE 4.6.
I installed KDE through the # pacman -S kde command, but is there some other package that I need to install in order to get Udisks working properly?
Thanks.
Last edited by Bordee (2011-03-24 16:09:25)

When I enter $ groups in a terminal I get the following
sys adm disk lp wheel games video audio optical storage power users
So I'm definitely part of the storage group.
I think I found a solution. I created a /data mountpoint in fstab and a /data folder in my root directory. Now, I'm able to mount and access the contents of the /home partition from Opensuse. The reason I wanted to do this was to access music and photos and transfer them onto my Arch /home partition.
I uncommented the cdrom, dvd, and fd0 devices in fstab and I created /media/cd, /media/dvd, and /media/fl. After inputting a # mount -a, my CDROM drive reads properly as does my USB.
So once again, thank, you for pointing me in the right direction.
One final thought. I was under the impression from reading the UDisks information that it automatically detected and mounted other partitions and devices without them being explicitly mounted in fstab. Was the assumption wrong? In other words, for UDisks and Dolphin to work together properly in KDE 4.6, do all of the devices that appear have to first be mounted in fstab?

[SOLVED] Major weird issues with KDE/Qt apps and unicode

Hi, I've tried to search for my problem, but nothing has showed up, so if this has already been answered, please forgive me.
Anyway, I use KDE as my primary desktop environment with SKIM as my unicode input method. After installing SKIM and Japanese fonts back when I first set Arch up, I have never had any issues with inputting unicode or displaying it in any program, whether that be irssi running through Konsole, or the song titles in Amarok. That all changed this afternoon, somehow...
The only major changes I can remember making to my system today are the following:
1.) I installed Awesome Window Manager to check it out
2.) I installed a pkgbuild of urxvt
3.) I made an .Xdefaults file and added these lines to customize my urxvt
After messing around with these things, I decided that Awesome wasn't a suitable WM for me, went back into KDE, and removed the package. I noticed a few strange issues after that though:
1. Foreign characters refuse to display properly in any terminal emulator.
2. Foreign characters come up as jumble in Konqueror now as well, when they never did before:
3. SKIM refuses to let me input Japanese characters with Anthy in any KDE app. The option for Japanese just isn't there, even though I have it installed:
4. Foreign characters display perfectly as tags for songs in Amarok, but if the music file itself has foreign characters in it, the title is garbled and the track is unplayable:
5. SKIM works absolutely fine in non-KDE apps like Firefox:
As seen in the last example, my Japanese fonts are all installed, and SKIM is working as it should in any non-KDE app, suggesting that there are no problems on that end. The issue seems to be with something in KDE, but I have no idea where to begin fixing it. Furthermore, I have no idea what could have caused this issue in the first place. I don't see how installing a window manager or terminal emulator package could have screwed up my fonts, and the .Xdefaults file I wrote just contained config information for urxvt. Nothing else. I even ended up deleting that, but it did not fix my problem.
If you could be of any help, I'd really appreciate it. I have a lot of files with foreign characters in them, and being able to read them is essential.
Last edited by LighthouseKeeper (2008-04-20 00:57:36)

I was just looking into locales, actually.
My current locale is:
LANG=en_US.utf8
LC_CTYPE="en_US.utf8"
LC_NUMERIC="en_US.utf8"
LC_TIME="en_US.utf8"
LC_COLLATE=C
LC_MONETARY="en_US.utf8"
LC_MESSAGES="en_US.utf8"
LC_PAPER="en_US.utf8"
LC_NAME="en_US.utf8"
LC_ADDRESS="en_US.utf8"
LC_TELEPHONE="en_US.utf8"
LC_MEASUREMENT="en_US.utf8"
LC_IDENTIFICATION="en_US.utf8"
LC_ALL=
and locale -a brings up:
C
POSIX
en_US.utf8
Is there anything here that could be causing this issue?
I'm curious how my locale got messed with in the first place if this is indeed the problem...
and here is my export:
declare -x COLORTERM=""
declare -x DESKTOP_SESSION="kde"
declare -x DISPLAY=":0.0"
declare -x DM_CONTROL="/var/run/xdmctl"
declare -x GS_LIB="/home/rael/.fonts"
declare -x GTK2_RC_FILES="/etc/gtk-2.0/gtkrc:/home/rael/.gtkrc-2.0:/home/rael/.kde/share/config/gtkrc-2.0"
declare -x GTK_IM_MODULE="scim"
declare -x GTK_RC_FILES="/etc/gtk/gtkrc:/home/rael/.gtkrc:/home/rael/.kde/share/config/gtkrc"
declare -x HOME="/home/rael"
declare -x KDE_FULL_SESSION="true"
declare -x KDE_MULTIHEAD="false"
declare -x KDE_SESSION_UID="1000"
declare -x KONSOLE_DCOP="DCOPRef(konsole-19951,konsole)"
declare -x KONSOLE_DCOP_SESSION="DCOPRef(konsole-19951,session-1)"
declare -x LOGNAME="rael"
declare -x OLDPWD
declare -x PATH="/opt/kde/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin:/usr/games"
declare -x PWD="/home/rael"
declare -x QT_IM_MODULE="scim"
declare -x SESSION_MANAGER="local/broadway:/tmp/.ICE-unix/19566"
declare -x SHELL="/bin/bash"
declare -x SHLVL="2"
declare -x SSH_AGENT_PID="19539"
declare -x SSH_AUTH_SOCK="/tmp/ssh-MtdHR19538/agent.19538"
declare -x TERM="xterm"
declare -x USER="rael"
declare -x WINDOWID="41943050"
declare -x XCURSOR_THEME="default"
declare -x XDM_MANAGED="/var/run/xdmctl/xdmctl-:0,maysd,mayfn,sched,rsvd,method=classic"
declare -x XMODIFIERS="@im=SCIM"
Last edited by LighthouseKeeper (2008-04-19 22:31:16)

[SOLVED] How to start JACK with KDE 4? (and which JACK should I use?)

Hi again
I'm using KDE 4, and I've just installed JACK again, and since I can't find any decent documentation on this, I'm having a bit of a problem.
Currently I have jack from [extra] installed, rather than jack2. When I try starting jack as the ArchWiki suggests, i.e. by typing "jackd -d alsa", I get the following error:
$ jackd -d alsa
jackd 0.120.1
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
the playback device "hw:0" is already in use. Please stop the application using it and run JACK again
cannot load driver module alsa
I've also tried jack2 from [community], and after starting it with "jack_control start", I get this...
$ jack_control start
--- start
DBus exception: org.jackaudio.Error.Generic: Failed to start server
So how do I start it? I'm guessing jack doesn't want to start because some other KDE application grabbed alsa before jackd (but I've been wrong before), and I don't have the slightest idea what jack2 is about with that "generic" error. If anyone would help me shed some light on this, I'd appreciate it a lot.
Thanks in advance!
Last edited by Wintershade (2011-03-26 19:22:08)

@schivmeister thanks that one worked
Yes, it was knotify4. So now this part works. I've switched to jack2 and it works flawlessly when starting it with jackd
So this part is solved... now, would you be so kind (if you know) as to point me to some tutorials or howtos (or proper documentation, cos I can't find much of that either) on how to connect various ALSA channels with JACK?
Basically, I want to route my PCM channel and the Mic channel into Capture 1 (or one to Capture 1 and other to Capture 2), since my Intel HDA audio card doesn't have the "Mix" or "What-U-Hear" or whatever as an available capture source. Any leads on that? (or do I have to open another thread for it?)
TIA

KDE: Setting time and date automatically

I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
Have you set ntp correctly?
Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
in short try this:
ntpq -p
If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

KDe 4.9 and pacman problems

because my messages to the ML seems to disappearI will ask here.
Hello,
Today I upgraded my KDe 4.8.4 to KDE 4.9.
I did all the steps according to the manual.
Everything went without any problems.
But when I start up KDE with startx I see the splashscreen and after that the screen went white.
KDE 4.8 works fine.
I have a Intel graphical card.
Second problem:
When I do pacman -Syu I see a lot of messages that the installed versions of kde are newer then the versions in [extra]
Anyone who can help me solve this two problems?
Roelof

hi, about your second problem, seems like if you has disable [kde-unstable] repo after your install, is the case? (you can make pacman -Syy to force update of all repo, just in case )
about your first problem, white screen in startup KDE, is the same with kdm? I have nvidia card with nouveau drivers and all works fine, so i can't test like you :s

[SOLVED] kde 4.1 and Quanta+

Since my last upgrade and switch to kde4.1 (it's really awesome) I'm on the verge of panicking since Quanta+ suddenly disappeared. How do I get it back? I realize from other forum posts that certian development libraries have been postponed until 4.2 in which case .... holy crap I'm screwed ... I reeaaaally need Quanta+ back.
Last edited by burgerman (2008-07-29 12:43:01)

burgerman wrote:
@dolby: that's quite disturbing news. I thought Quanta+ was quite popular and attractive to develop on. Though the quanta.kdewebdev.ord website haven't been updated since 2005, I was certian that I've seen several new developed features since. Is there any announcements from the guys who wants to adopt Quanta+?
Bluefish and Nvu are problably both very capable, but it'll be hell to switch since I've spent years adapting to Quanta+
http://lists.kde.org/?l=quanta&m=121608240104459&w=2

I have KDE right now and I want move to Gnome 3

I use Arch Linux with KDE and everyhting are good and I use KDE with a lot of packages for 6 month and , I want move to Gnome and use it . I install Gnome and Gnome Extra with pacman . what I must do right now ? do I need need remove KDE completely and all delete all packages are depend on KDE or no ?
can I have KDE packages and Gnome3 packages in one system . Or I have remove some packages , because of conflict ?

desm0tes is absolutely correct. This system has KDE, Xfce4, Awesome, e17, lxde.
How do you start your kde session? If you are using kdm, it will find gnome the next time you start it. You can select the session you want from the kdm login screen. If you choose to change to gdm, it will find kde as well. If you use startx from the console and need some hints, let us know.

KDE, Systemd, NM and double suspsend

So, first, don't get me wrong, it's not the same problem that happened when KDE doesn't support systemd inhibit.
Since NM 0.9.6.4, nm begin to add a new inhibit, seems to be used to track suspend status. But this seems cause double suspend for me again.
When I close the lid and suspend with KDE, and when I want to resume, I have to resume it for second time since it just suspends immediately again.
This is what I get.
$ systemd-inhibit --list
WHAT WHO WHY MODE UID PID
handle-power-key:handle-suspend-key:handle-hibernate-key:handle-lid-switch PowerDevil KDE handles p...ents block 1000 1068
sleep root inhibited delay 0 359
Second one comes from NM.
And if I downgrade NM to 0.9.6.0, problem will be solved, so I'm partly sure it's is related to this NM "new feature".
I even drop a report on systemd but so far no reply: https://bugs.freedesktop.org/show_bug.cgi?id=58220
Does anyone also have this problem know how to resolve it? Thanks! Not a big deal, just annoying...

csslayer wrote:Does anyone also have this problem know how to resolve it? Thanks! Not a big deal, just annoying...
Yes, I have the same issue, I'm using KDE as well. Unfortunately I don't know how to solve it.
[ericd@vaiopro13 ~]$ systemd-inhibit --list
WHAT WHO WHY MODE UID PID
handle-power-key:handle-suspend-key:handle-hibernate-key:handle-lid-switch PowerDevil KDE handles p...ents block 1000 512
sleep root inhibited delay 0 310
root 310 0.0 0.1 247480 9060 ? Ssl 19:14 0:02 /usr/sbin/NetworkManager --no-daemon

KDE 4.1 and installation questions.

Hi,
I want to move up to Arch from Mint and PCLOS but the installation routine has me a little apprehensive. I always read reviews of Arch Linux and sometimes the reviewers give the impression that the installation is not for newbies. I am not a newbie anymore but I don't have a lot of time to tinker or learn - just the facts.
So, Is the installation process challenging for the averagely intelligent person with some Linux experience with the easier distros like Mint and PCLOS ? Also, how is KDE 4.1 working out on Arch ? I would definitely like to try it if it is up to snuff now. I read that 4.0 release was pretty bad.
Thanks,
B.

The documentation for installing Arch is pretty good. I found that I did have to hunt around a bit at times to get everything set up, but it is all there if you look. You can be up and running quite quickly if you know what you're doing. If you don't, you might be in for a long afternoon.
The main difference between an Arch installation and say, PCLOS, is that with PCLOS, the install is always going to end up with a KDE desktop, KDM, sound, etc, so they can automate most of the process for you. Arch is completely ala carte, so to get a KDE workstation, you have to do the base install, add a user and configure them, install X, add support for your graphics card, configure support for sound, install HAL, install KDE, install KDE applications, set up and configure networking, and then install KDM (and I'm sure I'm leaving some stuff out).
Again, there is documentation for doing all of the above, BUT if you haven't done it before and you do things out of order, or can't figure out one of the steps, you can get stuck for a very long time.
What was your reason for wanting to ditch PCLOS in the first place? Just something different or did you have something in mind?
Chris
brjoon1021 wrote:
Hi,
I want to move up to Arch from Mint and PCLOS but the installation routine has me a little apprehensive. I always read reviews of Arch Linux and sometimes the reviewers give the impression that the installation is not for newbies. I am not a newbie anymore but I don't have a lot of time to tinker or learn - just the facts.
So, Is the installation process challenging for the averagely intelligent person with some Linux experience with the easier distros like Mint and PCLOS ? Also, how is KDE 4.1 working out on Arch ? I would definitely like to try it if it is up to snuff now. I read that 4.0 release was pretty bad.
Last edited by iggyst00ge (2008-08-01 17:45:42)

Kde authorization (polkit and dbus driving me insane)

hi,
apologies if this is complete newbie territory, but it's been a long time since i last used linux as a desktop OS so polkit and dbus are all new to me.
the problem, basically, is that KDE won't let me do anything i would consider privileged. network manager applet won't let me change wifi connections, package manager doesn't work and usb disks won't mount.
let's start with usb disks. i added a polkit rule as per the wiki:
[root@mjollnir rules.d]# cat 10-enable-mount.rules
polkit.addRule(function(action, subject) {
if (action.id == "org.freedesktop.udisks2.filesystem-mount-system" && subject.isInGroup("storage")) {
return polkit.Result.YES;
and i am in the storage group:
$ groups
wheel network audio storage power
but i get the following error when i try to open a newly inserted usb disk in dolphin:
Error checking authorization: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.udisks2.filesystem-mount is not registered (polkit-error-quark, 0)
and now for network manager -
running nm-applet from a terminal and trying to change wifi connection gives me this:
** (nm-applet:1369): WARNING **: Could not create object for /org/freedesktop/NetworkManager/Settings/0: No session found for uid 1000 (unknown)
** (nm-applet:1369): WARNING **: Could not create object for /org/freedesktop/NetworkManager/Settings/3: No session found for uid 1000 (unknown)
** (nm-applet:1369): WARNING **: handle_property_changed: failed to update property 'available-connections' of object type NMDeviceWifi.
(nm-applet:1369): nm-applet-WARNING **: Error connecting to ModemManager: Error calling StartServiceByName for org.freedesktop.ModemManager1: GDBus.Error:org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
(nm-applet:1369): nm-applet-WARNING **: Failed to register as an agent: (32) Session not found
(nm-applet:1369): nm-applet-WARNING **: Failed to register as an agent: (32) Session not found
(nm-applet:1369): nm-applet-WARNING **: Failed to add/activate connection: (32) No session found for uid 1000 (unknown)
finally, launching apper from the terminal:
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
i do have dbus processes running under my userid, so i think i have a session but i'm not really sure what i'm looking for, and learning the complete ins and outs of dbus is more than a little daunting for what should be a relatively simple task!
can anyone point me in the right direction to start figuring this out? i'm currently seriously considering a complete reinstall but i'm not sure i have the time for that, especially since i don't know if it would necessarily solve the problem
fwiw, i booted a mint livecd and all this stuff worked fine so it's not my hardware

Sorry for being vague - i understand it's not easy dealing with newbies i'll try to be clearer!
I was running kdm as root, then logging in as a regular user. I've now enabled the kdm systemctl service as per mariusmeyer's instructions, but it didn't change what happens when i insert a USB disk - same error as before.
command output below (username redacted)
$ loginctl show-session $XDG_SESSION_ID
Id=c2
Name=XXX
Timestamp=Mon 2014-04-14 20:06:49 BST
TimestampMonotonic=41104959
VTNr=7
Display=:0
Remote=no
Service=kde
Scope=session-c2.scope
Leader=434
Audit=0
Type=x11
Class=user
Active=yes
State=active
IdleHint=no
IdleSinceHint=0
IdleSinceHintMonotonic=0
and systemctl output
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2deDP\x2d1-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-eDP-1/intel_backlight
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb-sdb1.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb-sdb2.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb-sdb3.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d7-1\x2d7:1.0-bluetooth-hci0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/rfkill2
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d7-1\x2d7:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged Lynx Point-LP HECI KT
sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged Ethernet Connection I218-LM
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged Lynx Point-LP HD Audio Controller
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill1.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill1
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Dual Band Wireless-N 7260
sys-devices-pci0000:00-0000:00:1c.4-0000:04:00.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/backlight/acpi_video1
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged Crucial_CT480M500SSD1 1
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged Crucial_CT480M500SSD1 2
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged Crucial_CT480M500SSD1 3
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged Crucial_CT480M500SSD1
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-rfkill-rfkill0.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill0
sys-devices-platform-thinkpad_acpi-sound-card1.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card1
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-enp0s25.device loaded active plugged Ethernet Connection I218-LM
sys-subsystem-net-devices-wlp3s0.device loaded active plugged Dual Band Wireless-N 7260
-.mount loaded active mounted /
boot-efi.mount loaded active mounted /boot/efi
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
run-user-0.mount loaded active mounted /run/user/0
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-c1.scope loaded active running Session c1 of user root
session-c2.scope loaded active running Session c2 of user mcgoldrickm
bluetooth.service loaded active running Bluetooth service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
kdm.service loaded active running K Display Manager
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
NetworkManager.service loaded active running Network Manager
ntpd.service loaded active running Network Time Service
pdnsd.service loaded active running proxy name server
polkit.service loaded active running Authorization Manager
rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video1
systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:intel_backlight
systemd-hostnamed.service loaded active running Hostname Service
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill1
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill2
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for UID 0
[email protected] loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-systemd\x2dbacklight.slice loaded active active system-systemd\x2dbacklight.slice
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.slice
system.slice loaded active active System Slice
user-0.slice loaded active active user-0.slice
user-1000.slice loaded active active user-1000.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda3.swap loaded active active /dev/sda3
basic.target loaded active active Basic System
bluetooth.target loaded active active Bluetooth
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
113 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

KDE 4.10 and udisks2

Hello guys!
Just installed KDE 4.10 from testing and run into following issue: since kde 4.10 requires udisks2, all usb-devices are now being mounted to /run/media/user/ rather than into /media. Is intended behavior or will be things corrected before kde gets into [community]?

This is intended behavior. That's what udisks2 does.

[Solved] Trying to upgrade to kde 4.5 and receiving conflicts

I run pacman -Syu and get the following:
> pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (30): kdeaccessibility-colorschemes-4.5.0-1 kdeaccessibility-iconthemes-4.5.0-1 kdeaccessibility-kmag-4.5.0-1
kdeaccessibility-kmousetool-4.5.0-1 kdeaccessibility-kmouth-4.5.0-1 kdeadmin-kcron-4.5.0-1
kdeadmin-ksystemlog-4.5.0-1 kdeadmin-kuser-4.5.0-1 kdeadmin-system-config-printer-kde-4.5.0-1
kdeartwork-colorschemes-4.5.0-1 kdeartwork-desktopthemes-4.5.0-1 kdeartwork-emoticons-4.5.0-1
kdeartwork-iconthemes-4.5.0-1 kdeartwork-kscreensaver-4.5.0-1 kdeartwork-sounds-4.5.0-1
kdeartwork-styles-4.5.0-1 kdeartwork-wallpapers-4.5.0-1 kdeartwork-weatherwallpapers-4.5.0-1
kdebase-lib-4.5.0-1 kdebase-dolphin-4.5.0-1 kdebase-kdepasswd-4.5.0-1 kdebase-kdialog-4.5.0-1
kdebase-kfind-4.5.0-1 kdebase-konqueror-4.5.0-1 kdebase-kwrite-4.5.0-1 kdebase-plasma-4.5.0-1
libtorrent-rasterbar-0.15.2-1 xorg-server-utils-7.5-6 xorg-utils-7.6-3 xscreensaver-5.11-2
Total Download Size: 0.00 MB
Total Installed Size: 180.86 MB
Proceed with installation? [Y/n] y
checking package integrity...
(30/30) checking for file conflicts [------------------------------------------] 100%
error: failed to commit transaction (conflicting files)
kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/images/1280x1024.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/images/1600x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/images/1920x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/screenshot.png exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/metadata.desktop exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/images/1280x1024.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/images/1600x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/images/1920x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/screenshot.png exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/metadata.desktop exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1280x1024.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1600x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1920x1080.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1920x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/screnshot.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/metadata.desktop exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1280x1024.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1280x800.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1440x900.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1600x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1920x1080.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1920x1200.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/screenshot.jpg exists in filesystem
kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/metadata.desktop exists in filesystem
Errors occurred, no packages were upgraded.
cannot find any reference material searching so anyone have any ideas?
thanks
Last edited by splippity (2010-08-25 02:14:00)

Stop bumping. Use the edit button.
Not sure why it jokes on this, as the files should not be part of kdeartwork-wallpapers:
http://www.archlinux.org/packages/extra … allpapers/
Maybe your mirror has not synched completely yet? You could check manually if it already has the new kdebase-workspace.
Apart from all that, you could just hold back kdeartwork-wallpapers for now and update the rest.
Last edited by hokasch (2010-08-24 22:30:55)

KDE 4.3 and superkaramba plasmoids

Similar Messages

Maybe you are looking for