KDE 4.3 hangs system at start up

Hello. I'm testing Archlinux to see if it will one day replace my Debian installation.
Things were more or less fine during its short sporadic use, until I upgraded the system and KDE 4.3.0-6 was installed. During start up (startx), it hanged.
Today I tried another "pacman -Syu", and saw KDE 4.3.1 was available. It still hangs in the same way and place. The progress bar says that Akonadi is starting up.
Deleting the KDE configuration files at $HOME does nothing. The blinking caps lock and scroll lock make me think its a kernel panic related problem.
Information from the log files does not seem helpful (I'm posting several because I'm not sure where to look):
Xorg.0.log:
(EE) Failed to load module "fbdev" (module does not exist, 0)
kernel.log:
Sep  3 10:09:47 typhoon kernel: X:3511 freeing invalid memtype f8102000-f8112000     (repeated about 30 times)
Sep  3 10:09:48 typhoon kernel: mtrr: MTRR 2 not used
Sep  3 10:10:12 typhoon kernel: agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
Sep  3 10:10:12 typhoon kernel: agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
Sep  3 10:10:12 typhoon kernel: pci 0000:01:00.0: putting AGP V3 device into 8x mode
Sep  3 10:10:12 typhoon kernel: [drm] Setting GART location based on new memory map
Sep  3 10:10:12 typhoon kernel: [drm] Loading R200 Microcode
Sep  3 10:10:12 typhoon kernel: [drm] writeback test succeeded in 1 usecs
x.org runs fine with other window managers. Does anyone have any idea where I could look next for an explanation?
Thank you.
NOTE: This post is a duplicate of another I mistakenly posted in the Comunity Contributions section, and can't delete. I would request a moderator to please do so. My apologies.

I have the same pb since upgrade KDE from 4.2 to 4.3.
I use Arch with OpenBox at home at KDE at work. Everything was fine for years. I started having pbs with xorg about one year ago, with X hanging sporadically at start, or aften a random number of switches between consoles using CTR-ALT-Fn. I rarely starts X since I hibernate rather than halt computers, so this circumvents the pb.
Now after last upgrade (pacman -Suy) KDE 4.3 hangs, so that for the time being I use OpenBox also at home. Actually KDE starts and the mouse pointer is activated, but I get no taskbar and no response from mouse clicks, it hangs with a blank screen (white at work, black at home...).
Here is the error output from startx (KDE having being killed with CTRL-C). Errors from xorg are also present with other window managers, but they don't hang the system.
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux naoko 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 25 August 2009 09:20:48PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 3 22:14:31 2009
(==) Using default built-in configuration (39 lines)
(EE) Failed to load module "i810" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
Setting master
(EE) Failed to load module "synaptics" (module does not exist, 0)
(EE) No input driver matching `synaptics'
(EE) config/hal: NewInputDeviceRequest failed (15)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
startkde: Starting up...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kconf_update.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kcminit_startup.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_ksmserver.so
<unknown program name>(1482)/ KStartupInfo::createNewStartupId: creating: "naoko;1252008888;742335;1482_TIME0" : "unnamed
app"
could not access kephald, falling back to QDesktopWidget
adding an output 0 with geom: QRect(0,0 1024x768)
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kglobalaccel.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_plasma-desktop.so
kdeinit4: preparing to launch /usr/bin/knotify4
QDBusObjectPath: invalid path ""
kephald starting up
XRANDR error base: 162
RRInput mask is set!!
RandRScreen::loadSettings - adding mode: 60 1024 x 768
RandRScreen::loadSettings - adding mode: 61 1024 x 768
RandRScreen::loadSettings - adding mode: 62 800 x 600
RandRScreen::loadSettings - adding mode: 63 640 x 480
RandRScreen::loadSettings - adding crtc: 57
RandRScreen::loadSettings - adding output: 58
Setting CRTC 0 on output "VGA" (previous 0 )
RandRScreen::loadSettings - adding output: 59
Setting CRTC 57 on output "LVDS" (previous 0 )
CRTC outputs: (59)
XRandROutputs::init
added output 58
added output 59
output: "LVDS" QRect(0,0 1024x768) 0 false false
output: "VGA" QRect(0,0 0x0) 0 false false
load xml
connected: 0
looking for a matching configuration...
connected: 0
connected: 0
couldnt find matching configuration!!
registered the service: true
screens registered on the bus: true
outputs registered on the bus: true
configurations registered on the bus: true
Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection
kdeinit4: preparing to launch /usr/bin/kwrited
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kaccess.so
<unknown program name>(1505)/ kdemain: Xlib XKB extension major= 1 minor= 0
kdeinit4: preparing to launch /usr/lib/libkdeinit4_nepomukserver.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_krunner.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_nepomukserver.so
Nepomuk server already running.
(Soprano::PluginManager) found no soprano plugin at "/usr/lib/soprano/libsoprano_redlandbackend.so"
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
[/usr/bin/nepomukservicestub] Failed to start service nepomukstorage.
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 245 (Unknown error)
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180802500000016720007_1251813876_507696
[/usr/bin/nepomukservicestub] Failed to start service nepomukqueryservice.
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 245 (Unknown error)
[/usr/bin/nepomukservicestub] Failed to start service nepomukfilewatch.
[/usr/bin/nepomukservicestub] Missing dependency nepomukstorage
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 244 (Unknown error)
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 245 (Unknown error)
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803000000016720008_1251813876_519744
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803100000016720009_1251813876_508457
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803100000016720010_1251813876_509155
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803100000016720011_1251813876_509876
kdeinit4: preparing to launch /usr/lib/libkdeinit4_klipper.so
Unknown service name: 10dd616f6b000125180803100000016720012_1251813876_510559
ALSA lib setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): Aucun fichier ou d
ossier de ce type
Dropping master
waiting for X server to shut down Fin de la connexion (raccroché)
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
KCrash: Application 'ksmserver' crashing...
Warning: connect() failed: : Aucun fichier ou dossier de ce type
KCrash cannot reach kdeinit, launching directly.
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
Could not connect to D-Bus server: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-CGZQ35n2gn: C
onnexion refusée
ksmserver: Fatal IO error: client killed
** (<unknown>:1494): WARNING **: Serious fd usage error 15
** (<unknown>:1494): WARNING **: Serious fd usage error 13
startkde: Shutting down...
kdeinit4_wrapper: Warning: connect(/home/us/.kde4/socket-naoko/kdeinit4__0) failed: : No such file or directory
Error: Can not contact kdeinit4!
startkde: Running shutdown scripts...
drkonqi: cannot connect to X server :0.0
xprop: unable to open display ':0'
usage: xprop [-options ...] [[format [dformat]] atom] ...
At home, KDE does display startup progress at the usual default theme, it's only after the music indicating completion that I get a black screen. From there I can launch applications through ALT-F2, thus it is tempting to launch the taskbar and the program that handles desktop from a konsole at see what happens. I tried to launch plasma-desktop:
~> plasma-desktop
Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection
same pb observed there:
http://groups.google.com/group/linux.de … c3580a87e9
reported as a bur there:
http://osdir.com/ml/kde-bugs-dist/2009-08/msg15089.html
Another strange behavior, don't know if this is related to an X pb or whatever, but when I click on the ^ button in the top bar of a windows, I obtain a small window in the top left corner of the screen instead of a maximized window.
Last edited by zsurnz (2009-09-06 15:15:50)

Similar Messages

  • Terminla Application Hanging System When Started

    I was running a number of applications, invluding Terminal, when a system crash occurred. After that, all attempts to start Terminal resulted in a hung system. The Terminla program started, but a command prompt never appeared (only the "Welcome to Darwin" message appeared in the terminal window).
    After trying Preference File removal, Disk Utility, Reinstallling Terminal using Pacifist, I finally found a solution:
    - boot single user
    - run fsck (several times)
    At this point, I was able to delete the .bash_history file from my home directory
    Problem solved.

    I hope this post saved someone the 3 hours I spent troubleshooting.

  • Org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus...

    Hello,
    I didn't find any answer with Google for mine problem:
    The kde isn't starting, I get me error with dbus system:
    org.kde.powerdevil.backlighthelper: QDBusConnection:
    system D-Bus connection created before QCoreApplication. Application may
    misbehave.
    I use systemd. How I need to configure?
    Please help me.

    Agent pid 1925
    startkde: Starting up...
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    kbuildsycoca4 running...
    kbuildsycoca4(1944) KBuildSycoca::checkTimestamps: checking file timestamps
    kbuildsycoca4(1944) KBuildSycoca::checkTimestamps: timestamps check ok
    kbuildsycoca4(1944) kdemain: Emitting notifyDatabaseChanged ()
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    No outputs have backlight property
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.6'
    kded(1943)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    >>> 0x9ad590 created Job Job
    >>> 0x9afc30 created JobFactory
    >>> 0x9af730 created JobFactory
    >>> 0x9aecd0 created Job Job
    >>> 0x9ae030 created Job Job
    >>> 0x9af730 deleted JobFactory
    >>> 0x9afc30 deleted JobFactory
    >>> 0x9ad590 deleted Job Job
    >>> 0x9aecd0 deleted Job Job
    >>> 0x9ae030 deleted Job Job
    kded(1943) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(1943) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    kwin(1966): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
    kwin(1966): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
    kwin(1966): ""fsrestore3" - conversion of "0,0,0,0" to QRect failed"
    OpenGL vendor string: nouveau
    OpenGL renderer string: Gallium 0.4 on NVC3
    OpenGL version string: 3.0 Mesa 8.0.4
    OpenGL shading language version string: 1.30
    Driver: Nouveau
    GPU class: Unknown
    OpenGL version: 3.0
    GLSL version: 1.30
    Mesa version: 8.0.4
    X server version: 1.12.4
    Linux kernel version: 3.5.3
    Direct rendering: yes
    Requires strict binding: yes
    GLSL shaders: yes
    Texture NPOT support: yes
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    plasma-desktop: cannot connect to X server :0
    plasma-desktop(1974): Communication problem with "plasma-desktop" , it probably crashed.
    Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Message did not receive a reply (timeout by message bus)" "
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    kaccess: cannot connect to X server :0
    unnamed app(1976): Communication problem with "kaccess" , it probably crashed.
    Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Message did not receive a reply (timeout by message bus)" "
    xrdb: Connection refused
    xrdb: Can't open display ':0'
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    klauncher: Exiting on signal 1
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.
    kwin: Fatal IO error: client killed
    kglobalaccel: Fatal IO error: client killed
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    QSocketNotifier: Invalid socket 8 and type 'Read', disabling...
    Qt-subapplication: Fatal IO error: client killed
    KCrash: Application 'ksmserver' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
    Warning: connect() failed: : Nincs ilyen fájl vagy könyvtár
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThreadStorage: Thread 0x1d8fc40 exited after QThreadStorage 14 destroyed
    QThreadStorage: Thread 0x1d8fc40 exited after QThreadStorage 13 destroyed
    QThreadStorage: Thread 0x1d8fc40 exited after QThreadStorage 12 destroyed
    kded4: Fatal IO error: client killed
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    No protocol specified
    drkonqi: cannot connect to X server :0
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.
    Hello, this is a code, What is a problem?
    Could you help me?
    Please

  • System not started after installing grid control

    HI,
    I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
    after starting up the listener          
    sql>ora-01078: failure in processing system parameters
    LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
    sql>disconnectdfailed
    opmnctl:starting opmn and all managed process...
    CRS-4124: oracle high availability services startup
    crs-4000:command start failed, or completed with errors>

    Hi,
    Thanks for the reply!!!
    I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
    sql>ora-01078: failure in processing system parameter
    LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
    sql>disconnectdfailed
    opmnctl:starting opmn and all managed process...
    CRS-4124: oracle high availability services startup
    crs-4000:command start failed, or completed with errors>
    then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
    So my question is which file or dir is forcing system to startup the grid control on boot?

  • SAP BW 640-----SAINT HANGS AFTER CLICKING START

    Hi Everybody,
    We are on stack 9 on the source BW 640.  I am trying  to take the stack to 22 as a prerequirement for unicode conversion, and the upgrade to BI 7.0.
    In this regard there is a dependency on PI_BASIS to be on 2005, and BI_CONT to be on 353.  Currently we are on PI_BASIS 2004, and BI_CONT 352 on the source.
    We have extracted the appropriate installation packages for the above components.  When we run SAINT to install these components, and click START it just hangs.  It does not take me to the  next window.
    At least SAINT used to take me to the next window after clicking start, but one change I did was to update the kernel to 221, saint was still hanging after clicking start, again updated the kernel to 274 which is the latest release for NW 2004.  I also have the latest version of R3Trans, and tp.  SAINT still hangs after clicking start button.  No  logs are getting generated in \usr\sap\trans\log.  No files are getting generated in \usr\sap\trans\tmp. 
    I restored the database to what it was before we initiated the SAINT process.  Still SAINT hangs after clicking start button.
    In STMS-overviewu2014system-sap system-all the checks work fine(connection, transport directory, transport tool).  Likewise in SAINT-utilities-check-transport tool----every thing looks good.
    Why is SAINT hanging after clicking start button, can we downgrade the kernel to what it was before (level 155). 
    Any input is greatly appreciated.
    Thank you.
    Ramesh Srinivasan.

    Thank you so very,very much.  We are currently using a 640 gui.  We tested with 710 gui and saint after clicking start does not hang.
    So we are assuming that 710 gui will solve the problem.
    Thanks once again.  A very timely help.  You bet I'll touch base with you if I run into issues.
    RS

  • X-Fi + 2 GFX-Cards = high CPU-Load, slow Mouse, hanging system

    >X-Fi + 2 GFX-Cards = high CPU-Load, slow Mouse, hanging systemA Hey guys,
    I'm running 2 GF 8800 GTs (PCIe .) cards on a MSI Eclipse SLI board. My Audigy2 ZS PCI runned fine in this system.
    I just replaced the Audigy by a PCIe X-Fi (EMU20K2 audio processor - not the xtreme audio from MSI).
    Now I'm dealing with the following issue:
    - System startup is slow
    - in Windows, Mouse is slow, stuttering
    - high CPU-Load
    - very slow system response
    !!! Attention !!! I had this problems allready at the st boot with the X-Fi, when the driver from creative wasn't installed (the card was recognized as "HD Audio" bei Windows 7). Installing the drivers didn't help.
    If I install only one graphics card, the system runns fine and I can use the X-Fi and it's Software without problems.
    If I replace the X-Fi by the PCIe Xtreme Audio from MSI, System runns fine.
    If I use Win XP with the two GFX cards and the X-Fi, System runns fine.
    Can you help me?
    Regards from snowy Germany
    User....

    Hi there,
    got the same problem if i use my two Nvidia GTX260.
    My system:
    Asus P6T
    I7 920 @ 3,8GHz
    2GB ram
    Gigabyte GTX260 OC Edition
    Nvidia GTX260
    X-Fi XtremeGamer
    -System (Win7x64) takes ~0min to start.
    -Stuttering mouse, keyboard everything >.<
    Deactivating the onboard sound doesnt help.
    Newest Nvidia and Creative driver too =(
    The system runs fine without the X-FI and two GTX260 no errors ect...
    One GTX260 runs also fine with the X-FI
    But two graphic cards and the X-FI..... **bleep** =/
    I use debian as my main OS and it run still fine with both graphic cards and the x-fi...
    so i think its just a driver problem.
    Hope it will be fixed soon =/
    If someone have any sugestions...please help us.
    Greetings from Germany also =D
    Syro

  • After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

    After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

    Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

  • Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting

    Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting.  Has to be shut down by Task Manger.  Task Manger shows that it is still using some CPU.  Ran Procmon (part of Sysinternals) which shows that it is in a loop.   Stack trace shows it is executing code in AMTValidateProductLicense.dll.  Started happening about a month after I installed PSE.  Everything used to work fine at first.  Have tried going back to an old image of Win 8.1 on a different hard drive, otherwise same computer, and installed PSE 13 from DVD.  That installation never worked, it aways hangs.  If I do a clean boot, it sometimes runs long enough for me to click on a menu item and then hangs the same way.  And, yes I bought a new DVD to run on this computer, never been used in any other way.  Any ideas how I can get PSE running properly?

    It really doesn't look like a licensing issue, it seems to be code in the area of license validation that isn't working.
    I took your suggestion and initiated a couple of chat sessions with support, but so far still no luck.  The latest session with Neeraj seemed to be promising.  After some investigation he asked to reinstall.  First he uninstalled with Revo Uninstall, which seemed to be pretty thorough.  That required a restart, so he set things up to restore his conference session and took my phone number.  Unfortunately I guess his connection didn't come back.  When I didn't hear from him after a couple of hours I tried installing Photoshop and Premiere myself.  As before, Premiere works and Photoshop doesn't.  When I start Photoshop, the window opens and for a couple of seconds menus open when I click on them.  Then the window freezes and I have to use Task Manager to kill it.  So basically, I've tried several things but I'm back where I've been all along, I can't get Photoshop to work.  I'd really appreciate suggestions about something else to try.
    I wish someone at Adobe was interested in the Process Monitor traces I've made, because I'm sure someone who knows the code would be able to figure out pretty quickly what's happening.  Is it trying to read a file that's not there, failing to write a file, failing to make an internet connection or what?  It really shouldn't be this hard to figure out.

  • Satellite L500-1ek - setup system always starts with 800x600

    I have new Satellite L500-1ek notebook with Windows 7.
    Whatever screen resolution I setup system always starts with 800x600. And not only after restart but even when I logout my profile and login again.
    More: I use also external monitor. I can have mirror of my laptop screen on the monitor or only display on monitor but whatever I do I cannot have extended screen.
    When I try to set it up I'm simply ignored by driver.
    So I tried to install newest driver. I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
    What to do now?
    Marek

    Hi Marek,
    > I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
    As far as I know your notebook is equipped with Intel graphic card and so you are installing the latest display driver from Toshiba website. Is this right?
    Well, I have to say that I had the same issue on my Satellite U400 that is also equipped with Intel graphic card. The solution for this problem was pretty easy: I installed the driver via device manager. There select the graphic card, make a right click on it and select Update Driver. In next windows choose the advanced installation where you can choose the driver directory yourself. After the installation make a restart and thats all! :)

  • System always starts fsck's at boot and can't start normally.

    First of all, let me say that this forum is awesome. I've just started my first real ArchLinux experiment and you guys have helped me out so much already!
    Anyway, my system keeps starting fsck's at boot. It then starts counting to 1 minute and 30 seconds, after which it stops the fsck and drops into into emergency mode. I can only boot by passing the "fsck.mode=force" parameter to the kernel from the boot manager.
    I copied what I think are the relevant lines from journalctl:
    Oct 28 20:18:33 argon systemd[1]: Starting EFI System Partition Automount.
    Oct 28 20:18:33 argon systemd[1]: Set up automount EFI System Partition Automount.
    Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-6a7e8bc0\x2d2e45\x2d4915\x2da0df\x2dc2b53783831e.device...
    Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-e784d1a6\x2d648a\x2d423f\x2d9fd2\x2de8b5975672d4.device...
    Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-4631\x2d3940.device...
    Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device...
    Oct 28 20:18:33 argon kernel: EXT4-fs (dm-0): re-mounted. Opts: discard,data=ordered
    Oct 28 20:18:33 argon systemd[1]: Created slice system-lvm2\x2dpvscan.slice.
    Oct 28 20:18:33 argon systemd[1]: Starting LVM2 PV scan on device 8:18...
    Oct 28 20:18:33 argon systemd[1]: Starting LVM2 metadata daemon...
    Oct 28 20:18:33 argon systemd[1]: Started LVM2 metadata daemon.
    Oct 28 20:18:33 argon systemd[1]: Found device Crucial_CT256MX100SSD1 EFI\x20system\x20partition.
    Oct 28 20:18:33 argon systemd[1]: Starting File System Check on /dev/disk/by-uuid/4631-3940...
    Oct 28 20:18:33 argon systemd[1]: Starting LVM2 PV scan on device 8:34...
    Oct 28 20:18:33 argon lvmetad[221]: Cannot lock lockfile [/run/lvmetad.pid], error was [Resource temporarily unavailable]
    Oct 28 20:18:33 argon systemd-fsck[225]: fsck.fat 3.0.26 (2014-03-07)
    Oct 28 20:18:33 argon systemd-fsck[225]: /dev/sda2: 176 files, 51065/97280 clusters
    Oct 28 20:18:33 argon systemd[1]: Started File System Check on /dev/disk/by-uuid/4631-3940.
    Oct 28 20:18:33 argon systemd[1]: Mounting /boot...
    Oct 28 20:18:34 argon systemd[1]: Found device /dev/disk/by-uuid/6a7e8bc0-2e45-4915-a0df-c2b53783831e.
    Oct 28 20:18:34 argon systemd[1]: Starting File System Check on /dev/disk/by-uuid/6a7e8bc0-2e45-4915-a0df-c2b53783831e...
    Oct 28 20:18:34 argon systemd[1]: Mounted /boot.
    Oct 28 20:18:34 argon systemd-fsck[256]: /dev/mapper/SSDGroup-lvolhome: clean, 10177/12976128 files, 3039756/51897344 blocks
    Oct 28 20:18:34 argon systemd[1]: Started File System Check on /dev/disk/by-uuid/6a7e8bc0-2e45-4915-a0df-c2b53783831e.
    Oct 28 20:18:34 argon systemd[1]: Mounting /home.
    Oct 28 20:20:03 argon systemd[1]: Job dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device/start timed out.
    Oct 28 20:20:03 argon systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device.
    Oct 28 20:20:03 argon systemd[1]: Dependency failed for /mnt/media.
    Oct 28 20:20:03 argon systemd[1]: Dependency failed for Local File Systems.
    Oct 28 20:20:03 argon systemd[1]: Triggering OnFailure= dependencies of local-fs.target.
    Oct 28 20:20:03 argon systemd[1]: Dependency failed for /var/lib/mpd/music.
    Oct 28 20:20:03 argon systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/bc7d204d-f19b-4238-a539-ccee44b83a7c.
    Oct 28 20:20:03 argon systemd[1]: Job dev-disk-by\x2duuid-e784d1a6\x2d648a\x2d423f\x2d9fd2\x2de8b5975672d4.device/start timed out.
    Oct 28 20:20:03 argon systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-e784d1a6\x2d648a\x2d423f\x2d9fd2\x2de8b5975672d4.device.
    Oct 28 20:20:03 argon systemd[1]: Dependency failed for /backup.
    Oct 28 20:20:03 argon systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/e784d1a6-648a-423f-9fd2-e8b5975672d4.
    I hope you can help me fix the problem or further diagnose it.

    Oct 28 20:20:03 argon systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device.
    It seems there is a problem mounting /home. What device do you mount there; and does that exist when you end up in the rescue-shell?

  • KDE - warning: cannot resolve "system-config-printer =1.1.7-3"

    I'm trying to install KDE, fresh install, and this is what I get after: pacman -S kde
    resolving dependencies...
    warning: provider package was selected (freeglut provides glut)
    warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeadmin-system-config-printer-kde"
    warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeutils-printer-applet"
    :: the following package(s) cannot be upgraded due to unresolvable dependencies:
    kdeadmin-system-config-printer-kde kdeutils-printer-applet
    Do you want to skip the above packages(s) for this upgrade? [Y,n]
    I try different mirror and again same warning, is it safe to skip this package?
    Last edited by archiebald (2009-09-06 10:27:35)

    flamelab wrote:
    It's been fixed.Wait for your miror to sync.
    I use these:
    Server = http://mir.archlinux.fr/$repo/os/x86_64
    Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/x86_64
    Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/x86_64
    Server = ftp://ftp.otenet.gr/pub/linux/archlinux/$repo/os/x86_64
    Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/x86_64
    Server = http://archlinux.freeside.ru/$repo/os/x86_64
    I also use some of this mirrors (mir...)
    Thank you for information, I thought that it's something like that.

  • Copy all the objects from the one system that start with (ZANK)

    hi to all,
    I have installed the name space /ank/ in the US system, we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/. problem is how can i copy objects and re-create.
    thanks

    Hi Ankal,
    I guess this is your second thread on the same question. Ok provide these information
    >>I have installed the name space /ank/ in the US system,
    Are you saying that you have a machine (US System) and i has a namespace /ank/ ? What all objects are there in this namespace?
    >>we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/.
    Is the India system on the same US system?
    Also tell me whether you have opened the home page of SAP XI/PI?  If yes , are you able to open Integration Repository? If yes then how these US and India systems are referred in Integration Repository? Are they referred as separate software components?
    Regards
    Suraj

  • Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution i have already purchased it can i download a torrent and authorize it

    Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution I have already purchased it can I download a torrent and authorize it. Somebody pl. Help

    Exactly. Some of us don't understand the situation in India. This is a country with sickest internet speeds. The internet segment is dominated by fraudulant companies. There is no consistency that is why most of the data transfer here is through Pen drives and torrent websites. We have never seen a good downlooad speed here. And on the top of inconsistency lies the Mac book Air without a built in RJ45 port.
    If i have to do it in an internet cafe it will cost me more time and money than to purchase a Mac book air itself. Apple should start giving us software loaded flash drives at least at premium.

  • System Pref Start up Disk blank

    So the computer is working, I can boot to either windows or OS X by holding option, but under System Preferences > Start Up Disk there are zero disks listed. any way to fix that?

    We can try by forcing it to create a new System Prefs preference file; if that doesn't work, a reinstall by using your recovery partition is necessary I believe since System Prefs are part of the OS and so the only way to reinstall. But, first:
    go to your User Library (which is now hidden): holding down Option key, go to "go" in File Menu and the library will show up. If you want, you can drag its icon into the side bar (I've done that for easier access); scroll down to Preferences and then to the two items that are shown here:
    Throw them in the trash (do not empty yet).
    Restart computer.
    Open System Prefs and see if the startup disk now shows.
    Doing this may return some changes you've made to the default state, so you'll need to check those Panes to see if the settings need to be redone. If everything is ok, you can empty the trash.

  • When the new version will correct the error 10.0.0? program constantly hangs. will not start!

    when the new version will correct the error 10.0.0? program constantly hangs. will not start!

    Are you using any VST plug-ins or audio units? Then check, if they are still compatible. You may need to uninstall them.
    See this support document: 
    Unexpected behavior with Audio Unit plug-ins http://support.apple.com/kb/TS5249

Maybe you are looking for

  • Cannot see views in table list when building a form or report page

    We are new to APEX. accessing remote databases by defining database links in our apex instance and then views in the apex instance on the remote tables. We set up all this stuff, then when we go to build a report or form on one of the views, the view

  • Still having problems with VPN access

    Hello! I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). Fr

  • Particular site does not load in Firefox but does load on IE

    ''dupe of https://support.mozilla.org/en-US/questions/916798'' The connection was reset The connection to the server was reset while the page was loading. I have tried safe mode with networking amongst other things but I just cant get this darn site

  • OS5 for 8520 on Orange

    Hi there Just noticed on the Blackberry website that Orange have finally released OS 5.0.0.1168 for the 8520 but when i go through my phone to use the Wireless Update function it says there is no update available, is this because the OS needs updatin

  • Exporting photoshop cs3 docs into Illustrator cs3

    I used the pen tool to trace around the face of a coin, saved it to a transparent background png. I need to export this file to Illustrator so I can use the 3D effect to rotate it. I tried to export as ai. command and when the doc is opened in Illust