KDE after update

Hi, I am using lynx now because KDE after update few hours ago doesn't work correct.
KDE start but there are KDE crsh daemon million times.
There are no errors in logs.

tpowa wrote:as temporary workaround until kdebase-2 package arrices on your mirrors, add dbus and hal to daemons= array in rc.conf then the crashes stop.
Thank a lot for the new kdebase . New hot morning, new update and everything is as before . Thanks.
BTW: I like linx

Similar Messages

Can't log in KDE after update

Hello all,
I updated my arch 2 days ago and I cannot go pass KDM since. I enter the user and pass it shows me ksplash screen and it gets stuck at the first "harddrive" icon. Also I noticed that since the update during boot time the console gives me a warning that "Root device is not mounted in Read-Write mode". Does it have any connection? And what does the first "harddrive" icon in Ksplash represent? Also I tried to log in using KDE-Failsafe, but with the same result. I log in TWM though. So I'm guessing it's a KDE issue?
Thank you all in advance!
Best Regards,
NightSinner

Hello
You didn't give enough informations:
What was updated 2 days ago?
How is kdm launched?
How you choose between normal kde, kde failsafe mode or twm?
When there is a problem, it should be the first thing to do to look into the log files: kdm.log, Xorg.0.log or ~/.xsession-errors
And you didn't provide any infos about your video card and driver,...
The boot warning is unrelated to the graphical issue with kde, it concerns the fsck checking of the root file system since systemd 204 update; there are threads about that you can find with a search in the forums.
Nobody can guess all these things above, because nobody has access to your machine apart you.
You need to show what you tried to solve your problem and ask only after that if you fail to find a working solution.
Good luck.

KDE crash (and pannels disappear) after update

Just now I updated, and KDE was updated to 4.5.3-1. After that update, kwin crashed, and both desktop widgets and panels disappeared. I restarted X and that brought back the widgets, but not the panels... Which is very much annoying, because besides the default panel (the "taskbar"), I have another customized panel*, filled with links to the apps I use the most, and it is very cumbersome to rebuild it ...
The "fun" thing is, it turns out, that the the previous default panel was still present, although not visible, because after adding a new default panel, notifications started showing up twice. So I assume the same must have happened with the customized panel. But I was not able to get either of them back, so I created new ones...
Anyone else went through anything similar? Moreover, does anyone know how to create a "backup" of the contents of the customized panel, so as to minimize the hassle of creating a new one? (assuming such a thing is even possible)
Thanks in advance.
* It's an empty panel, to which I drag the apps links from the K-menu.

I don't have this kind of problem. But if I would to try and make a back up of my plasma settings I'd check plasma-desktop-appletsrc in ~/.kde4/share/config

Can't start KDE applications after update to KDE 4.9 [SOLVED]

After updating to KDE 4.9, I can not start systemsettings, kwrite, konversation, digikam or any other KDE application using krunner or from a shell. Non-kde applications starts fine. Any help deeply appreciated!
Last edited by sredna (2012-08-09 15:10:14)

I got no messages on the terminal, and restarting KDE or even rebooting did not help. But killing some stale processes did, so now I just wonder where those came from...
Thanks for your help anyways!

[SOLVED]no sound in both headphone and speaker after update (alsa)

No sound after update. But, I can hear sound in headphone after install pulseaudio, while there is no sound in speaker (after plugging out headphone). I have tried some methods in related wiki articles, such as alsa and pulseaudio, but not works.
My enviroment is arch64, kde. I have installed lib32-alsa-plugins lib32-libpulse lib32-openal.
Anything others I can do? Thanks for advance.
Here is the output:
xym@Arch ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
xym@Arch ~ $ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 30162 1
snd_hda_codec_realtek 41295 1
snd_hda_intel 37000 3
snd_hda_codec 150305 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
xym@Arch ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Jan 15 11:09 by-path
crw-rw----+ 1 root audio 116, 7 Jan 15 11:09 controlC0
crw-rw----+ 1 root audio 116, 6 Jan 15 11:09 hwC0D0
crw-rw----+ 1 root audio 116, 5 Jan 15 11:09 hwC0D3
crw-rw----+ 1 root audio 116, 4 Jan 15 12:17 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Jan 15 12:17 pcmC0D0p
crw-rw----+ 1 root audio 116, 2 Jan 15 12:17 pcmC0D3p
crw-rw---- 1 root audio 116, 1 Jan 15 11:09 seq
crw-rw----+ 1 root audio 116, 33 Jan 15 11:09 timer
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitchs
Playback channels: Front Left - Front Rightss
Limits: Playback 0 - 64s
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 31 [100%] [33.00dB] [on]
Front Right: Capture 31 [100%] [33.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [off]
Front Right: Playback 31 [100%] [12.00dB] [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
xym@Arch ~ $ speaker-test -c 2
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
1 - Front Right
Time per period = 5.651882
0 - Front Left
1 - Front Right
Time per period = 5.973485
0 - Front Left
I can't hear any sound during this test.
/etc/modprobe.d/modprobe.conf
blacklist snd_intel8x0m
Last edited by XuYimin (2014-01-16 12:18:02)

straykat wrote:
XuYimin, can you please give more info on what you mean by "update (alsa)"? There is no "alsa" package in Arch as alsa & it's modules are part of the (linux) kernel.
As you have already gone into alsamixer to ensure the appropriate channels are unmuted & set at the desired level, have you also gone into your KDE systems settings -> Multimedia -> Audio and Video Settings & rechecked your settings?
sorry，it's really misleading in my words.what i want to say is 'no sound after update, and the sound system is alsa.'
i'm sure the approiate channels are unmuted. in the Video Setting, I tested all sound cards in the list, But i can't hear sound.

[Solved]Qtcurve style disappeared after update

After updated to version 0.65.1-1,and now i can't select qtcurve from systemsettings-->styles,and in kdeglobals "widgetStyle=qtcurve",but in fact oxygen style is used .How can i get qtcurve style back?
Edit:I downloaded the PKGBUILD file and recompiled (version 0.65.3-1),just as Pierre said,and now it works.Thanks for all your replies.
Last edited by ashunter (2009-07-05 16:10:49)

I'm also using kdemod-core and qtcurve just vanished from the styles-section, but not from the win-deco-section.
Compiling qtcurve 0.65.3 with the following PKGBUILD did the trick (based on qtcurve-qt4 from AUR: http://aur.archlinux.org/packages.php?ID=22064)
pkgname=qtcurve-kde4
pkgver=0.65.3
pkgrel=1
arch=('i686' 'x86_64')
groups=('qtcurve')
license='GPL'
pkgdesc='qtcurve'
source=("http://home.freeuk.com/cpdrummond/QtCurve-KDE4-${pkgver}.tar.bz2")
url='http://www.kde-look.org/content/show.php?content=40492'
makedepends=('cmake')
depends=(qt)
md5sums=('99888fa785eb895a117d80f50d44d7b9')
build() {
cd $srcdir
cd QtCurve-KDE4-${pkgver}
cmake . \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr \
-DQTC_DISABLE_KDEFILEDIALOG_CALLS=false
make
make DESTDIR=$pkgdir install
Last edited by n8schicht (2009-07-05 13:48:04)

Desktop effect disabled after update

Hello,
After updating kde 4.5 today, my desktop effects disabled and my awn navigator doesn't work properly.
When try to enable it, I get the message: Desktop effects suspended by other application. When restart with Alt-F12, awn disappears; when I shut down kde, I get the message -- Desktop effects is too slow disabled.
Before update everything worked perfectly.
Proc: dual core 2.6
Video: ati 3600
memory: 6 gig
Any idea what could be wrong?
jmak

https://bbs.archlinux.org/viewtopic.php?id=103522

After update udev mounts all partitions automatically (but shoudn`t)

Here goes: after updating udev from 167-2 to 168-1, it started mounting all partition at boot. No rules (the list and the rules are the default ones) seem to include this, and google said automounting MUST be set up by user.
Downgrading fixes the issue, but I try to keep the system up to date, so this is not an option. Also I do not want to disable udisk mounting by polkit, since I want to keep the option of mounting them via KDE.
Can anyone help please?
P.S. arch x68_64
Last edited by levantis (2011-05-17 16:05:35)

same here...
i changed the 'pass' value in the /etc/fstab to "0" for the mounted devices - this works temporarily for me so i can boot up the system.
excuse me for my bad english

Very slow and unstable after update...

Hello!
After update yesterday, my Arch64 was very slow and unstable... Eclipse IDE crashes, Firefox uses +200mb and Xorg uses +15% of CPU. Xorg lags when I'm going to switch between virtual desktop in KDE... very strange!
Some confs below:
[root@Selene hlegius]# uname -a
Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64 Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz GenuineIntel GNU/Linux
[root@Selene hlegius]# free -m
total used free shared buffers cached
Mem: 3947 1121 2826 0 30 466
-/+ buffers/cache: 624 3322
Swap: 0 0 0
[root@Selene hlegius]# kde-config -v
Qt: 3.3.8b
KDE: 3.5.9
kde-config: 1.0
[root@Selene hlegius]# X -version
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH x86_64
Current Operating System: Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64
Build Date: 21 June 2008 11:53:34AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Any ideas ?

Rexilion wrote:
I misread that the in kernel driver of v3.12 was working properly. THat way you can figure out what exact change broke performance by testing different development kernels.
There is an in-kernel driver in staging called rtl8192u. It received a lot of changes in v3.12. Maybe try v3.11 and see if that works?
it didnt work in kernel 3.12, but with https://aur.archlinux.org/packages/dkms-8192cu/ it worked perfect
in kernel 3.13 it is horrible both witht he stock driver or with the AUR package.

[SOLVED]Problems after update do 4.3.2

Hi All. After update to newest KDE 4.3.2 on my both PCs when i start desktop enviroment i have a critical error of kdeutils-printer-applet. Does anyone experienced such a problem?
Last edited by Nixxx (2009-10-12 16:38:10)

I've got two i686 machines, one seems to be running just fine (atom-based netbook), the other (older Athlon XP) doesn't seem to run anything, I can start KDM, which in turn starts the Xserver, but it flickers like it keeps crashing, then gives up. I can't use Xdmcp either, and I can't ssh -X tunnel KDE apps, I get this error when I try to X11 tunnel apps:
systemsettings: symbol lookup error: /usr/lib/libkdeui.so.5: undefined symbol: _ZNK6Sonnet66Sonnet6
I can tunnel non-KDE apps OK like Firefox and Arora, (I tried firefox) and run start TWM, so things aren't completely dead.
$ pacman -Qs | grep kde
local/kde-agent 20090801-2
local/kde-meta-kdeadmin 4.3-7 (kde-meta)
Meta package for kdeadmin
local/kde-meta-kdebase 4.3-7 (kde-meta)
Meta package for kdebase
local/kde-meta-kdepim 4.3-7 (kde-meta)
Meta package for kdepim
local/kde-meta-kdeplasma-addons 4.3-7 (kde-meta)
Meta package for kdeplasma-addons
local/kde-meta-kdesdk 4.3-7 (kde-meta)
Meta package for kdesdk
local/kde-meta-kdeutils 4.3-7 (kde-meta)
Meta package for kdeutils
local/kdeadmin-kcron 4.3.2-2 (kde kdeadmin)
local/kdeadmin-ksystemlog 4.3.2-2 (kde kdeadmin)
local/kdeadmin-kuser 4.3.2-2 (kde kdeadmin)
local/kdeadmin-system-config-printer-kde 4.3.2-2 (kde kdeadmin)
local/kdebase-dolphin 4.3.2-2 (kde kdebase)
local/kdebase-kappfinder 4.3.2-2 (kde kdebase)
local/kdebase-kdepasswd 4.3.2-2 (kde kdebase)
local/kdebase-kdialog 4.3.2-2 (kde kdebase)
local/kdebase-kfind 4.3.2-2 (kde kdebase)
local/kdebase-kinfocenter 4.3.2-2 (kde kdebase)
local/kdebase-konqueror 4.3.2-2 (kde kdebase)
local/kdebase-konsole 4.3.2-2 (kde kdebase)
local/kdebase-kwrite 4.3.2-2 (kde kdebase)
local/kdebase-lib 4.3.2-2
local/kdebase-plasma 4.3.2-2 (kde kdebase)
local/kdebase-runtime 4.3.2-1
local/kdebase-workspace 4.3.2-1 (kde)
local/kdebindings-python 4.3.2-1 (kdebindings)
local/kdeedu-marble 4.3.2-1 (kde kdeedu)
local/kdegraphics-libs 4.3.2-1
local/kdegraphics-okular 4.3.2-1 (kde kdegraphics)
local/kdelibs 4.3.2-3
local/kdelibs-experimental 4.3.2-1
local/kdemultimedia-dragonplayer 4.3.2-1 (kde kdemultimedia)
local/kdemultimedia-kmix 4.3.2-1 (kde kdemultimedia)
local/kdenetwork-krfb 4.3.2-1 (kde kdenetwork)
local/kdepim-akregator 4.3.2-1 (kde kdepim)
local/kdepim-console 4.3.2-1 (kde kdepim)
local/kdepim-kaddressbook 4.3.2-1 (kde kdepim)
local/kdepim-kalarm 4.3.2-1 (kde kdepim)
local/kdepim-kjots 4.3.2-1 (kde kdepim)
local/kdepim-kleopatra 4.3.2-1 (kde kdepim)
local/kdepim-kmail 4.3.2-1 (kde kdepim)
local/kdepim-knode 4.3.2-1 (kde kdepim)
local/kdepim-knotes 4.3.2-1 (kde kdepim)
local/kdepim-kontact 4.3.2-1 (kde kdepim)
local/kdepim-korganizer 4.3.2-1 (kde kdepim)
local/kdepim-kpilot 4.3.2-1 (kde kdepim)
local/kdepim-kresources 4.3.2-1 (kde kdepim)
local/kdepim-ktimetracker 4.3.2-1 (kde kdepim)
local/kdepim-libkdepim 4.3.2-1
local/kdepim-runtime 4.3.2-1
local/kdepim-wizards 4.3.2-1 (kde kdepim)
local/kdepimlibs 4.3.2-1
local/kdeplasma-addons-applets-bball 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-binary-clock 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-bubblemon 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-calculator 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-charselect 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-comic 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-dict 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-eyes 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-fifteenpuzzle 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-filewatcher 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-frame 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-fuzzy-clock 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-incomingmsg 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-kolourpicker 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-konqprofiles 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-konsoleprofiles 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-lancelot 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-leavenote 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-life 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-luna 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-magnifique 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-mediaplayer 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-microblog 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-news 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-notes 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-nowplaying 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-opendesktop 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-paste 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-pastebin 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-previewer 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-rememberthemilk 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-rssnow 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-showdashboard 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-showdesktop 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-systemloadviewer 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-timer 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-unitconverter 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-weather 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-applets-weatherstation 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-libs 4.3.2-2
local/kdeplasma-addons-runners-browserhistory 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-runners-contacts 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-runners-converter 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-runners-katesessions 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-runners-konquerorsessions 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-runners-konsolesessions 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-runners-spellchecker 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-wallpapers-mandelbrot 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-wallpapers-marble 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-wallpapers-pattern 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-wallpapers-virus 4.3.2-2 (kde kdeplasma-addons)
local/kdeplasma-addons-wallpapers-weather 4.3.2-2 (kde kdeplasma-addons)
local/kdesdk-cervisia 4.3.2-1 (kde kdesdk)
local/kdesdk-kapptemplate 4.3.2-1 (kde kdesdk)
local/kdesdk-kate 4.3.2-1 (kde kdesdk)
local/kdesdk-kbugbuster 4.3.2-1 (kde kdesdk)
local/kdesdk-kcachegrind 4.3.2-1 (kde kdesdk)
local/kdesdk-kdeaccounts-plugin 4.3.2-1 (kde kdesdk)
local/kdesdk-kdepalettes 4.3.2-1 (kde kdesdk)
local/kdesdk-kioslave 4.3.2-1 (kde kdesdk)
local/kdesdk-kmtrace 4.3.2-1 (kde kdesdk)
local/kdesdk-kompare 4.3.2-1 (kde kdesdk)
local/kdesdk-kpartloader 4.3.2-1 (kde kdesdk)
local/kdesdk-kprofilemethod 4.3.2-1 (kde kdesdk)
local/kdesdk-kstartperf 4.3.2-1 (kde kdesdk)
local/kdesdk-kuiviewer 4.3.2-1 (kde kdesdk)
local/kdesdk-lokalize 4.3.2-1 (kde kdesdk)
local/kdesdk-poxml 4.3.2-1 (kde kdesdk)
local/kdesdk-scripts 4.3.2-1 (kde kdesdk)
local/kdesdk-strigi-analyzer 4.3.2-1 (kde kdesdk)
local/kdesdk-umbrello 4.3.2-1 (kde kdesdk)
local/kdeutils-ark 4.3.2-4 (kde kdeutils)
local/kdeutils-kcalc 4.3.2-4 (kde kdeutils)
local/kdeutils-kcharselect 4.3.2-4 (kde kdeutils)
local/kdeutils-kdelirc 4.3.2-4 (kde kdeutils)
local/kdeutils-kdessh 4.3.2-4 (kde kdeutils)
local/kdeutils-kdf 4.3.2-4 (kde kdeutils)
local/kdeutils-kfloppy 4.3.2-4 (kde kdeutils)
local/kdeutils-kgpg 4.3.2-4 (kde kdeutils)
local/kdeutils-ktimer 4.3.2-4 (kde kdeutils)
local/kdeutils-kwallet 4.3.2-4 (kde kdeutils)
local/kdeutils-okteta 4.3.2-4 (kde kdeutils)
local/kdeutils-printer-applet 4.3.2-4 (kde kdeutils)
local/kdeutils-superkaramba 4.3.2-4 (kde kdeutils)
local/kdeutils-sweeper 4.3.2-4 (kde kdeutils)
Last edited by pseudonomous (2009-10-10 05:31:41)

Plasma 5 fails to start after update

After last kde packages update, my plasma desktop won't start anymore. When I run 'startkde', I get the error:
➜ ~ startkde
startkde: Starting up...
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
startkde: Shutting down...
klauncher: Exiting on signal 1
startkde: Running shutdown scripts...
startkde: Done.
I found that running with sudo it works. I tried chowing and chmoding 777 the directory /run/user/1000 but made no difference. All other desktop environments and applications seem to work normal. What could be causing this issue?
Thanks in advance and happy new year

Found the solution: https://bugs.freedesktop.org/show_bug.cgi?id=85657
Thx!

Problem after update

Hello
I update my laptop. after update my KDE don't work and I Have black page after turn system on.
I edit demons for inactive KDE and work on command line. After turn system on and load arch Linux. I See login page in command line and I try login whit my user or root user but arch don't accept my user name and password a and I can't do ant thing
any one can help me ? ( sorry for bad English )

berbae wrote:Verify the capslock key or the numlock key, to be sure about letters case or numbers from numpad in the user name or password.
Or the keyboard layout in /etc/rc.conf which could not be the one of the laptop.
Hello
Thank you for your reply . I check again my keyword and I don't think it be a problem. The problem it I can't login in arch. and I can't do any thing

[SOLVED]Re-enable TouchPad after updating from Plasma 5.1.2 to 5.2.0

This is my first post here. I have been an Arch user for nearly 2 years now and have finally had to troubleshoot an issue that had no fix on here or in the wiki so I wanted to share. After updating Plasma from 5.1.2 to 5.2.0 my touchpad on my Samsung series 3 was being disabled between the display manager and the KDE splash screen. To fix this I had to re-enable the touchpad in:
~/.config/ktouchpadenablerrc
from
touchpadEnabled=false
to
touchpadEnabled=true
I hope this keeps someone else from 2 days of troubleshooting.
-Shawn
Last edited by coldbloodedgt (2015-02-01 08:41:00)

This would be better in the wiki -- could you add it there please?
https://wiki.archlinux.org/index.php/KDE

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

KDE after update

Similar Messages

Maybe you are looking for