KDE Always Tries to Autostart Chromium.
KDE is always trying to autostart Chromium when I login. If I remove it from the Autostart programs it re-instates itself after a couple of reboots. I have KDE configured to start with an empty session and have added Chromium to the list of "Applications to be excluded from sessions". It's particularly annoying because not only doesn't Chromium start up, but while its trying to start it stops me doing anything with the desktop, or anything else, for a couple of minutes
I'm not sure if KDE pays any attention to the .desktop files, but you can check this too: https://wiki.archlinux.org/index.php/Au … _Autostart
Maybe there's some other place you should check https://wiki.archlinux.org/index.php/KD … p_disabled where the autostart settings might be stored.
Last edited by karol (2014-05-17 23:56:49)
Similar Messages
-
I have reset my iPod touch 4th generation and since yesterday, it is always trying tto reset
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
MY daughter sold me this iPad! When I go to update it always tries to use her appleid instead of mine!! She has forgot the password to this account what should I do! Because it says it's hooked up to my Id but when I try to update itsail ways says her I'd information
Is this when updating apps or the iPad's iOS version ? If apps then any apps that your daughter downloaded onto the iPad will be tied to her account, so only her account can download updates to those apps (you would need to delete the apps and buy/download them with your own account to be able to download future updates to them with your account) then she could try getting her password reset via http://iforgot.apple.com
If you are trying to update the iOS version on it and she's left it tied to her iCloud account then with iOS 7 and activation lock only her account will be able to re-activate the iPad. She can try getting her password reset via the above iforgot link. -
Macbook is always trying to connect to an other one which is not switched on
Hello,
I have a redundant problem :
My Mac Book is always trying to connect to an other one which is not switched on.
I used Drive mounter, but I deleted the device that my Mac has tryed to connect with.
Have you a solution to stop this behavior
ThanksThis sounds like it may be a question for the developers of Drive Mounter, as it sounds like that may still be trying to connect to that remote volume.
You could rule out other things before contacting them by checking your login items in System Preferences -> Users & Groups. Make sure that volume is not in that list. Also, check any other apps or services that may be automatically making use of that volume, such as Time Machine. -
When exporting, movie always tries to fade to black toward the end
when exporting, movie always tries to fade to black toward the end. trying to export just one picture, i realize that when exporting multiple pics to a movie it fades to black at the end, but im just doing one pic. settings are as follows, ken burns effect is being used, settings in slideshow, transition are "none". settings in "adjust" show transition as "none" also. this is my first post so hope that this makes sense. thanks.
wcminor:
Welcome to the Apple Discussions. I tried to duplicate your settings and exported to a QT movie. The movie did not fade to black at the end. It does fade when played in iPhoto.
My settings were:
In the slideshow window:
Effect: none
Default transitiion: none
In the settings pane:
KB is checked, transition is none.
It's the same whether there's music or not.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance. -
What is the application which is always trying to connect to a server ?
what is the application which is always trying to connect to a server ?
My macbook is always trying to connect to one of my Mac which is not on the network ?
How to stop with that ?
Cheers.Oh, just the message ("there was a problem connecting to the server...."..)
I (perhaps) just find the solution..
I reset the sync service folder
http://support.apple.com/kb/TS1627 -
On start-up, Firefox always tries to connect to a proxy even if I set the "network settings" to "no proxy". I have to manually go to "network settings" and set it to "no proxy" every time I start Firefox.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I just bought my wife a iMac. Now her iMac and my Macbook Air are always trying to connect via bluethooth. I use a bluetooth mouse and she has the bluethooth keyboard and trackpad, so turning bluetooth off is not the best answer.
ThanksWhat's the problem? In theory a BT device can only pair with one machine at a time.
-
Startup always tries to find my other computer?
When I restart my computer, it ALWAYS tries to reconnect to my mac mini in the other room. ONE TIME I shared files between the two and now it ALWAYS looks for it when restarting.
How can I disable this? I looked in my startup items folder and there's nothing there that would make it look for the mini. Where do I look to stop this from happening?
Thank you!If it is trying to find the other computer, and failing, whatever is looking ought to be posting error messages to the log file. Try launching Console from your Utilities folder and see if there are error messages, and, if so, exactly what they say. That might give a clue.
If there's nothing in the Console log, try clicking on the Logs icon in the toolbar and then click on the system.log--the newest log, which reports what the computer is doing when it starts up, begins with the time. I just started up 10 minutes ago, so I scroll up and see:
Nov 15 23:03:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
Scroll down aways after that and you will see where it mounts your disks, with a message like this:
Nov 15 23:03:10 localhost diskarbitrationd[43]: disk2s10 hfs
7E476622-EDE9-3BF8-BF19-31E11E9E9535 NoobiX
After that the login window starts, and at some point thereafter would be the information that might solve the mystery.
Francine
Francine
Schwieder -
My mac is always trying to connect to another computer which is not on the networkc
My mac is always trying to connect to one of my Mac which is not on the network..
I cannot find why and what application is doing that ?You might want to monitor this thread. Thomas Reed usually solves problems:
https://discussions.apple.com/message/20341397#20341397 -
Internet Explorer always trying to go through proxy
Hi everyone,
I'm having a strange issue with Internet Explorer - it's always trying to go through my corporate proxy server, which is available only while I'm connected to the corporate network via VPN. So the moment I disconnect from VPN, I must go to IE LAN
Settings and uncheck "Automatically detect settings". If I don't do that, no matter what, it won't get past the message "The proxy server isn't responding...".
I think I tried pretty much everything I could find relevant on TechNet... it still doesn't help.
https://support.microsoft.com/kb/271361
https://social.technet.microsoft.com/forums/ie/en-US/07d1ec01-8d5a-4c9f-9a16-ba1d7d459e58/how-to-stop-ie-from-caching-wpad
Other than that, scanned for viruses/malware, installed the latest updates, tried the "obvious stuff".
Also got a Microsoft support technician connected to the computer remotely - today he suggested to escalate this issue.
I'd be very grateful for any ideas,
Thanks!!Hi dsafro,
We wonder if the corporate network has group policy for proxy settings, seems like your Internet Explorer keeps policy settings even when you disconnect from VPN.
Does closing and reopen Internet Explorer change the settings back?
The proxy setting registry entry is in
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\
"ProxyEnable"=dword:00000000
1 for enable 0 for disable
When you disconnect from VPN, the value should be changed back to 0.
We suggest you perform a trace by using process monitor
As a workaround, the proxy pac file might be help.
Here is an example which can change your proxy settings according your network IP address.
function FindProxyForURL(url, host)
if (isInNet(myIpAddress(), "192.168.1.0", "255.255.255.0"))
return "PROXY 192.168.1.1:8080";
else
return "DIRECT";
You might need change the “”part depends on your network environment.
More information about process monitor
https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Regards
D. Wu -
IMac always tries to boot from CD
Hi,
i installed Windows XP using BootCamp and since then the system always tries to boot from a CD. Now I have to hold down COMMAND while starting the computer to choose the harddrive.
How can I make the system boot from the harddrive automatically?
ThanksHold down on the option key on restart.
Choose the mac os x volume icon and then click on the straight arrow.
Once booted into Leopard select system preferences from the apple menu.
Choose Startup Disk and set the volume you want to boot to on startup.
The option key allows you to boot to any volume without changing the default setting.
The Startup Disk preference allows you to set the default startup volume. -
I have an ipad2 that has ios4.3.5 that I'm trying to update to iOS 6. I'm not able to update because of unidentifiable apps. I'm assuming that these are apps I tried to get but couldn't open because I needed iOS 5 or higher. These apps are still in my app store always needing updates, but I can't open or update because I don't have iOS 5. I can't delete them either because they can't be opened or aren't on my screen to hold/let wiggle/X. I need to remove these apps, but can't figure out how. Please someone tell me how
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
Cheers, Tom -
I use tabbed browsing all the time. When I open a tab to a website that causes a problem, freezing Firefox (but not the computer) I usually find that I can clear the Firefox problem only by rebooting the computer. I am then dismayed to find that Firefox then tries to recreate the same set of tabs that caused the problem in the first place, causing Firefox to freeze a second time. Usually I can get out of this by closing Firefox and waiting a very long time for Firefox to fully close so that it can be restarted again.
This problem happens in version 4.0 as well as in the last version of 3 that I had. I recall that in some earlier versions Firefox would ask if you want to recreate your tabs or open as a new browser window. I always took second option. That choice is no longer appearing.Set the pref [http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes browser.sessionstore.max_resumed_crashes] to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.<br />
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
You can use the Filter bar at to top of the about:config page to locate a pref more easily. -
Cannot get sound to work on multiple programs (kde)..tried wiki advice
im using the most current version of kde 4.2, and alsa with hda audio
snd_hda_intel
sound works great, but i cannot get it work on more than one program at at time. i tried pulseaudio, i tried esd and i blacklisted oss from my rc.conf.
every time i tried loading esd it would just fallback to my hda audio.
im not sure what to do now...i am running arch x64, may this have something to do with it?
any guidance would be greatly appreciated.originalsurfmex wrote:
im using the most current version of kde 4.2, and alsa with hda audio
snd_hda_intel
sound works great, but i cannot get it work on more than one program at at time. i tried pulseaudio, i tried esd and i blacklisted oss from my rc.conf.
every time i tried loading esd it would just fallback to my hda audio.
im not sure what to do now...i am running arch x64, may this have something to do with it?
any guidance would be greatly appreciated.
Don't use ESD and PulseAudio, the only thing they make are problems.
Do you have a ~/.asoundrc or a /etc/asound.conf? If yes, try to delete them.
Maybe you are looking for
-
How to Schedule Back Ground job For every 30 Min...
Hi friends, Please Tell me the steps... How to schedule BACKGROUND Job for every 30 Min. Please Help me ..its urgent. Thanks & Regards, Vasu.
-
Smartview- Reporting and Analysis URL not valid
Hello, We are currently getting ready to Go Live with Hyperion Planning upgrade to version 11.1.2.2 and have been testing the new smartview version 11.1.2.2.310. Currently within our company, olur security policy does not let the regular User communi
-
Hello all, I am working on idoc to idoc scenario, i have to map a segment to idoc, exact requirement is " If there are 10 "E1P12" segments in the inbound IDOC then we need to create 10 outbound Delins IDOCs, each with 1 E1EDP10 segment. Can anyone p
-
Photoshop Plugin Support - PLEASE
I find myself exporting images to TIFF and then loading them into Photoshop to use 3rd party Noise reduction and then Photoshops Smart Sharpen tool, the Noise reduction and sharpening tools in Lightroom are USELESS, and I am sorry to say this as I lo
-
I keep getting this error 1084: Syntax error:expecting rightparen before message here's the code private function populateDatabase():void var createTable:SQLStatement= new SQLStatement();