KDE can't launch programs unless logged into a TTY

Hi guys, first post here so I suppose I should add some background. I've been using Linux as my primary OS for years, but I'm completely new to Arch. Previously I has mostly used openSUSE, but Tumbleweed spoiled me and made me want a more fleshed-out rolling release distro.
Installation went fine and my system is up and running pretty much as desired, but I have one annoying and somewhat mystifying bug. When I log in to KDE, I won't be able to launch any applications. I can click on the launcher icons in the panel or in Kickoff or KRunner etc, but nothing happens. There aren't even the launch feedback animations in the taskbar that would normally run while launching.
I discovered a partial solution by accident. I figured it was a permissions error, so I switched to a TTY and tweaked the permissions on my home directory. It turns out that *logging into a different TTY session as myself lets KDE launch apps again.*
So, here's the flow:
1) Log in to KDE - Can't launch anything
2) ctrl-alt-F1, login as self
3) ctrl-alt-F7, everything works again
If I switch back to TTY1 and log out, KDE stops working again. Obviously my "solution" isn't much of a solution, does anybody have any insight?
PS: I'm starting KDM at boot via systemd. Is it possible that somehow it isn't starting up correctly? I'm not sure what logfiles to post, but if any are helpful I can.

OK, I managed to fix it. It was related to the hostname not getting set properly. KDE was expecting a display using the hostname I set, but when KDE was logging in the hostname was somehow getting set to localhost. Running (sudo) hostnamectl set-hostname hostname fixed the issue. Logging in to a TTY was somehow magically setting the hostname properly. Weird.
Last edited by gh02t (2013-06-17 02:32:51)

Similar Messages

Can a single account be logged into more than once at the same time

-
Firstly, please excuse me if this has already been asked - I tried searching for various terms but couldn't see anything.
At present we run a single account (non-admin) on our iMac G5 which holds all out families photos/music/movies etc. I'm wanting to add a MacBook to our iMac. They would communicate either wirelessly, or via an ethernet hub. We would like to fire up the laptop and log into that same account, so all that information is available (read and write) from both computers, and at the same time.
Is this possible? If so, how is it achieved. Is there some network settings that have to be made on the MacBook?
I'm aware that there will be limitations - i.e. two people won't be able to modify the same file at the same time. Also that the iMac will have to be powered up for the account to be accessed etc.
Finally, due to space considerations I'm wanting to move the home folder for our existing account onto an external FW drive (using the techniques I've found in other posts on this forum). Will this affect any solution to my original question?
Thanks for your time.

When you turn on file sharing, others can see your computer in the Finder > Go > Network window, where they can click on it to see what shares are available. These can be the public folders (which don't need a password to connect), or user folders (which do). By connecting to one of the shares, they then have access to the files within them. If you don't want to use an external disk, you can use SharePoints to share folders within your account, such as Music or Pictures. Just be aware that sharing files within a user account can run into permissions issues, for example trying to edit a document owned by someone else, which is one of the reasons to use an external disk. Tiger and Leopard also support Access Control Lists, but you need to know what you are doing.

Application Explorer won't start unless logged into workstat

Since upgrading all our XP workstations to Zenworks Desktop Management Agent to 7.0.173.90519 (Zenworks7 Sp1R4) some computer's Application Explorer is failing to start properly.
The Application Explorer system tray icon is defective, it does not respond to anything and no application folders are loaded. However it does work ok if you use Workstation Only first then log into Edirectory afterwards
I have tried reinstalling the Desktop Management client, Novell Client, re-registering the workstation and clearing the NAL Cache. The only thing that fixes it is reloading Windows

If you are able to open an SR, I would recommend doing so.
What happens if you set "Application Explorer" so that is does NOT load
automatically.
Login Normally.
Then load "Application Explorer" manually.
If that helps, how are you loading "Application Explorer".
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Patrick Farrell" <[email protected]> wrote in message
news:YvXFm.357$[email protected]..
> neil france wrote:
>> Since upgrading all our XP workstations to Zenworks Desktop Management
>> Agent to 7.0.173.90519 (Zenworks7 Sp1R4) some computer's Application
>> Explorer is failing to start properly.
>>
>> The Application Explorer system tray icon is defective, it does not
>> respond to anything and no application folders are loaded. However it
>> does work ok if you use Workstation Only first then log into Edirectory
>> afterwards
>>
>> I have tried reinstalling the Desktop Management client, Novell Client,
>> re-registering the workstation and clearing the NAL Cache. The only
>> thing that fixes it is reloading Windows
>>
>>
> Sounds like you're having the same issue that I am having. See the
> thread "ZFD agent hangs after splash screen". Please post there so that
> Jared can get info from you as well to determine if it's the same issue.
>
>

Can Automator be used to log into a website with Firefox

Is it possible to setup Automator so that it opens Firefox and goes to a URL and then logs into a site?

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

How can I set Messages to log into my account when I launch it.

I find it inconvenient to have to have to switch from offline to available each time I start up Messages. Is there a way to auto login in to an account when I start up Messages.

Hi.
gail from maine may have part of the answer but I an not sure it is all of it.
It seems you are talking about other accounts rather than the iMessages account as the iMessages account is not affected by the "when I Quit..." setting.
This means it should be AIM, Jabber or Yahoo types.
I would start by using the option in the General Section to Unlink multiple Buddy lists if you use them.
Under the Text Resizing slider is Buddy List stuff starting with Show All Buddy list in one List which is ticked (Enabled) by default.
This should show you the Buddy List as separate windows. (they are also listed in the Window Menu as separate items).
At the top left of each Buddy List is your Name (or Handle/ID for that Account) pulled from the Contact App > My Card.
Below that is the Current Status.
If you click this it shows the current Saved Status Messages (including the built in ones) and the iTunes Playing option.
At the bottom you can set to have All Buddy List show the same Message.
As you can see there is an Off Line option.
It should remember any Changes you make. If it is not it will return to the last setting.
If this is happening you will have lost Permissions to Write to the .plist involved.
Lets us know what is happening with this before we explain how to sort this.
It is getting late where I am and there will be some time (and some drink) before I am bac.
9:42 pm Wednesday; December 31, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Kde can't launch with systemd

hello.yesterday,I followed the wiki to install pure systemd.but when i restarter,kde couldn't start but kdm ran fine.then,i tried to run kde by startkde but failed.it replied
$DISPLAY is not set or cannot connect to X server.
I googled this error but I only getted information about how to configure it with consolekit.
Here's output of systemctl:
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-...-1\x2d1.6-1\x2d1.6:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chipset Family High Definition Audio Controller
sys-devices-pci0000:00-0000:00:1c.0-0000:07:00.0-net-eth0.device loaded active plugged NetLink BCM57781 Gigabit Ethernet PCIe
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-net-wlan0.device loaded active plugged Centrino Wireless-N 1000 [Condor Peak]
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda1.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda2.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda3.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda4.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda5.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda6.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda7.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda8.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...2-host1-target1:0:0-1:0:0:0-block-sda.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...3-host2-target2:0:0-2:0:0:0-block-sr0.device loaded active plugged Optiarc_DVD_RW_AD-7740H
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-eth0.device loaded active plugged NetLink BCM57781 Gigabit Ethernet PCIe
sys-subsystem-net-devices-wlan0.device loaded active plugged Centrino Wireless-N 1000 [Condor Peak]
-.mount loaded active mounted /
boot.mount loaded active mounted /boot
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
mnt-d.mount loaded active mounted /mnt/d
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted /sys/kernel/debug
tmp.mount loaded active mounted /tmp
var.mount loaded active mounted /var
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
acpid.service loaded active running ACPI event daemon
cronie.service loaded active running Periodic Command Scheduler
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
lm_sensors.service loaded active exited Initialize hardware monitoring sensors
lxdm.service loaded active running LXDE Display Manager
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
acpid.socket loaded active listening ACPID Listen Socket
dbus.socket loaded active running D-Bus System Message Bus Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
bluetooth.target loaded active active Bluetooth
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
[1;39m72 loaded units listed.[0m Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
This is Xorg.1.log,but it seems no problem.
[ 1630.241]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 1630.244] X Protocol Version 11, Revision 0
[ 1630.245] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 1630.246] Current Operating System: Linux ssfdust 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64
[ 1630.246] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c2eccb8b-70e3-49d5-b169-137ee95b307d ro quiet
[ 1630.248] Build Date: 19 October 2012 03:54:56PM
[ 1630.249]
[ 1630.250] Current version of pixman: 0.26.2
[ 1630.251] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1630.251] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1630.255] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Nov 4 01:15:54 2012
[ 1630.256] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1630.256] (==) No Layout section. Using the first Screen section.
[ 1630.256] (==) No screen section available. Using defaults.
[ 1630.256] (**) |-->Screen "Default Screen Section" (0)
[ 1630.256] (**) | |-->Monitor "<default monitor>"
[ 1630.256] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1630.256] (==) Automatically adding devices
[ 1630.256] (==) Automatically enabling devices
[ 1630.256] (==) Automatically adding GPU devices
[ 1630.256] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1630.256] Entry deleted from font path.
[ 1630.256] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1630.256] Entry deleted from font path.
[ 1630.256] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1630.256] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1630.256] Entry deleted from font path.
[ 1630.256] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1630.256] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1630.256] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1630.256] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1630.256] (II) Loader magic: 0x7fcc20
[ 1630.256] (II) Module ABI versions:
[ 1630.256] X.Org ANSI C Emulation: 0.4
[ 1630.256] X.Org Video Driver: 13.0
[ 1630.256] X.Org XInput driver : 18.0
[ 1630.256] X.Org Server Extension : 7.0
[ 1630.257] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1630.258] (--) PCI:*(0:0:2:0) 8086:0126:17aa:3982 rev 9, Mem @ 0xe0000000/4194304, 0xd0000000/268435456, I/O @ 0x00003000/64
[ 1630.258] (--) PCI: (0:1:0:0) 1002:6843:17aa:3982 rev 0, Mem @ 0xc0000000/268435456, 0xe0700000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 1630.258] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1630.259] Initializing built-in extension Generic Event Extension
[ 1630.259] Initializing built-in extension SHAPE
[ 1630.260] Initializing built-in extension MIT-SHM
[ 1630.261] Initializing built-in extension XInputExtension
[ 1630.262] Initializing built-in extension XTEST
[ 1630.263] Initializing built-in extension BIG-REQUESTS
[ 1630.263] Initializing built-in extension SYNC
[ 1630.264] Initializing built-in extension XKEYBOARD
[ 1630.265] Initializing built-in extension XC-MISC
[ 1630.266] Initializing built-in extension SECURITY
[ 1630.266] Initializing built-in extension XINERAMA
[ 1630.267] Initializing built-in extension XFIXES
[ 1630.267] Initializing built-in extension RENDER
[ 1630.268] Initializing built-in extension RANDR
[ 1630.269] Initializing built-in extension COMPOSITE
[ 1630.269] Initializing built-in extension DAMAGE
[ 1630.270] Initializing built-in extension MIT-SCREEN-SAVER
[ 1630.270] Initializing built-in extension DOUBLE-BUFFER
[ 1630.271] Initializing built-in extension RECORD
[ 1630.271] Initializing built-in extension DPMS
[ 1630.272] Initializing built-in extension X-Resource
[ 1630.272] Initializing built-in extension XVideo
[ 1630.273] Initializing built-in extension XVideo-MotionCompensation
[ 1630.273] Initializing built-in extension XFree86-VidModeExtension
[ 1630.273] Initializing built-in extension XFree86-DGA
[ 1630.274] Initializing built-in extension XFree86-DRI
[ 1630.274] Initializing built-in extension DRI2
[ 1630.274] (II) LoadModule: "glx"
[ 1630.274] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1630.275] (II) Module glx: vendor="X.Org Foundation"
[ 1630.275] compiled for 1.13.0, module version = 1.0.0
[ 1630.275] ABI class: X.Org Server Extension, version 7.0
[ 1630.275] (==) AIGLX enabled
[ 1630.275] Loading extension GLX
[ 1630.275] (==) Matched intel as autoconfigured driver 0
[ 1630.275] (==) Matched intel as autoconfigured driver 1
[ 1630.275] (==) Matched vesa as autoconfigured driver 2
[ 1630.275] (==) Matched modesetting as autoconfigured driver 3
[ 1630.275] (==) Matched fbdev as autoconfigured driver 4
[ 1630.275] (==) Assigned the driver to the xf86ConfigLayout
[ 1630.275] (II) LoadModule: "intel"
[ 1630.275] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1630.275] (II) Module intel: vendor="X.Org Foundation"
[ 1630.275] compiled for 1.13.0, module version = 2.20.12
[ 1630.275] Module class: X.Org Video Driver
[ 1630.275] ABI class: X.Org Video Driver, version 13.0
[ 1630.275] (II) LoadModule: "vesa"
[ 1630.275] (WW) Warning, couldn't open module vesa
[ 1630.275] (II) UnloadModule: "vesa"
[ 1630.275] (II) Unloading vesa
[ 1630.275] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1630.275] (II) LoadModule: "modesetting"
[ 1630.276] (WW) Warning, couldn't open module modesetting
[ 1630.276] (II) UnloadModule: "modesetting"
[ 1630.276] (II) Unloading modesetting
[ 1630.276] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 1630.276] (II) LoadModule: "fbdev"
[ 1630.276] (WW) Warning, couldn't open module fbdev
[ 1630.276] (II) UnloadModule: "fbdev"
[ 1630.276] (II) Unloading fbdev
[ 1630.276] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1630.276] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 1630.276] (++) using VT number 3
[ 1630.276] (II) intel(0): using device path '/dev/dri/card0'
[ 1630.276] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1630.276] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1630.276] (==) intel(0): RGB weight 888
[ 1630.276] (==) intel(0): Default visual is TrueColor
[ 1630.276] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 1630.276] (**) intel(0): Relaxed fencing enabled
[ 1630.276] (**) intel(0): Wait on SwapBuffers? enabled
[ 1630.276] (**) intel(0): Triple buffering? enabled
[ 1630.276] (**) intel(0): Framebuffer tiled
[ 1630.276] (**) intel(0): Pixmaps tiled
[ 1630.276] (**) intel(0): 3D buffers tiled
[ 1630.276] (**) intel(0): SwapBuffers wait enabled
[ 1630.276] (==) intel(0): video overlay key set to 0x101fe
[ 1630.276] (II) intel(0): Output LVDS1 has no monitor section
[ 1630.276] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 1630.290] (II) intel(0): Output VGA1 has no monitor section
[ 1630.291] (II) intel(0): Output HDMI1 has no monitor section
[ 1630.333] (II) intel(0): Output DP1 has no monitor section
[ 1630.333] (II) intel(0): EDID for output LVDS1
[ 1630.333] (II) intel(0): Manufacturer: AUO Model: 303c Serial#: 0
[ 1630.333] (II) intel(0): Year: 2010 Week: 0
[ 1630.333] (II) intel(0): EDID Version: 1.3
[ 1630.333] (II) intel(0): Digital Display Input
[ 1630.333] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 1630.333] (II) intel(0): Gamma: 2.20
[ 1630.333] (II) intel(0): No DPMS capabilities specified
[ 1630.333] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1630.333] (II) intel(0): First detailed timing is preferred mode
[ 1630.333] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.340 greenY: 0.570
[ 1630.333] (II) intel(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 1630.333] (II) intel(0): Manufacturer's mask: 0
[ 1630.333] (II) intel(0): Supported detailed timing:
[ 1630.333] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 1630.333] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 1630.333] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 1630.333] (II) intel(0): Unknown vendor-specific block f
[ 1630.333] (II) intel(0): AUO
[ 1630.333] (II) intel(0): B140XW03 V0
[ 1630.333] (II) intel(0): EDID (in hex):
[ 1630.333] (II) intel(0): 00ffffffffffff0006af3c3000000000
[ 1630.333] (II) intel(0): 00140103801f11780a10b59758579226
[ 1630.333] (II) intel(0): 1e505400000001010101010101010101
[ 1630.333] (II) intel(0): 010101010101121b5646500023302616
[ 1630.333] (II) intel(0): 360035ad100000180000000f00000000
[ 1630.333] (II) intel(0): 00000000000000000020000000fe0041
[ 1630.333] (II) intel(0): 554f0a202020202020202020000000fe
[ 1630.333] (II) intel(0): 004231343058573033205630200a002b
[ 1630.333] (II) intel(0): EDID vendor "AUO", prod id 12348
[ 1630.333] (II) intel(0): Printing DDC gathered Modelines:
[ 1630.333] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP)
[ 1630.333] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Printing probed modes for output LVDS1
[ 1630.333] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP)
[ 1630.333] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1630.333] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1630.333] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1630.333] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1630.346] (II) intel(0): EDID for output VGA1
[ 1630.347] (II) intel(0): EDID for output HDMI1
[ 1630.389] (II) intel(0): EDID for output DP1
[ 1630.389] (II) intel(0): Output LVDS1 connected
[ 1630.389] (II) intel(0): Output VGA1 disconnected
[ 1630.389] (II) intel(0): Output HDMI1 disconnected
[ 1630.389] (II) intel(0): Output DP1 disconnected
[ 1630.389] (II) intel(0): Using exact sizes for initial modes
[ 1630.389] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 1630.389] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1630.389] (II) intel(0): Kernel page flipping support detected, enabling
[ 1630.389] (**) intel(0): Display dimensions: (310, 170) mm
[ 1630.389] (**) intel(0): DPI set to (111, 114)
[ 1630.389] (II) Loading sub module "fb"
[ 1630.390] (II) LoadModule: "fb"
[ 1630.390] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1630.390] (II) Module fb: vendor="X.Org Foundation"
[ 1630.390] compiled for 1.13.0, module version = 1.0.0
[ 1630.390] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1630.390] (II) Loading sub module "dri2"
[ 1630.390] (II) LoadModule: "dri2"
[ 1630.390] (II) Module "dri2" already built-in
[ 1630.390] (==) Depth 24 pixmap format is 32 bpp
[ 1630.390] (II) intel(0): [DRI2] Setup complete
[ 1630.390] (II) intel(0): [DRI2] DRI driver: i965
[ 1630.390] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 1630.391] (II) UXA(0): Driver registered support for the following operations:
[ 1630.391] (II) solid
[ 1630.391] (II) copy
[ 1630.391] (II) composite (RENDER acceleration)
[ 1630.391] (II) put_image
[ 1630.391] (II) get_image
[ 1630.391] (==) intel(0): Backing store disabled
[ 1630.391] (==) intel(0): Silken mouse enabled
[ 1630.391] (II) intel(0): Initializing HW Cursor
[ 1630.391] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1630.392] (==) intel(0): DPMS enabled
[ 1630.392] (==) intel(0): Intel XvMC decoder enabled
[ 1630.392] (II) intel(0): Set up textured video
[ 1630.393] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1630.393] (II) intel(0): direct rendering: DRI2 Enabled
[ 1630.393] (==) intel(0): hotplug detection: "enabled"
[ 1630.403] (--) RandR disabled
[ 1630.409] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1630.409] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1630.409] (II) AIGLX: enabled GLX_ARB_create_context
[ 1630.409] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1630.409] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1630.409] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1630.409] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1630.409] (II) AIGLX: Loaded and initialized i965
[ 1630.409] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1630.409] (II) intel(0): Setting screen physical size to 361 x 203
[ 1630.434] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 1630.434] (**) Power Button: Applying InputClass "system-keyboard"
[ 1630.434] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1630.434] (II) LoadModule: "evdev"
[ 1630.434] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1630.434] (II) Module evdev: vendor="X.Org Foundation"
[ 1630.434] compiled for 1.13.0, module version = 2.7.3
[ 1630.434] Module class: X.Org XInput Driver
[ 1630.434] ABI class: X.Org XInput driver, version 18.0
[ 1630.434] (II) Using input driver 'evdev' for 'Power Button'
[ 1630.434] (**) Power Button: always reports core events
[ 1630.434] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 1630.434] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1630.434] (--) evdev: Power Button: Found keys
[ 1630.434] (II) evdev: Power Button: Configuring as keyboard
[ 1630.434] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 1630.434] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1630.434] (**) Option "xkb_rules" "evdev"
[ 1630.434] (**) Option "xkb_model" "pc105"
[ 1630.434] (**) Option "xkb_layout" "de"
[ 1630.434] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.449] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 1630.449] (**) Video Bus: Applying InputClass "system-keyboard"
[ 1630.449] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1630.449] (II) Using input driver 'evdev' for 'Video Bus'
[ 1630.449] (**) Video Bus: always reports core events
[ 1630.449] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 1630.449] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1630.449] (--) evdev: Video Bus: Found keys
[ 1630.449] (II) evdev: Video Bus: Configuring as keyboard
[ 1630.449] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:0a/input/input15/event15"
[ 1630.449] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1630.449] (**) Option "xkb_rules" "evdev"
[ 1630.449] (**) Option "xkb_model" "pc105"
[ 1630.449] (**) Option "xkb_layout" "de"
[ 1630.449] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.450] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1630.450] (**) Power Button: Applying InputClass "system-keyboard"
[ 1630.450] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1630.450] (II) Using input driver 'evdev' for 'Power Button'
[ 1630.450] (**) Power Button: always reports core events
[ 1630.450] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1630.450] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1630.450] (--) evdev: Power Button: Found keys
[ 1630.450] (II) evdev: Power Button: Configuring as keyboard
[ 1630.450] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input3/event3"
[ 1630.450] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 1630.450] (**) Option "xkb_rules" "evdev"
[ 1630.450] (**) Option "xkb_model" "pc105"
[ 1630.450] (**) Option "xkb_layout" "de"
[ 1630.450] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.450] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 1630.450] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 1630.450] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1630.450] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1630.450] (**) Sleep Button: always reports core events
[ 1630.450] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 1630.450] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 1630.450] (--) evdev: Sleep Button: Found keys
[ 1630.450] (II) evdev: Sleep Button: Configuring as keyboard
[ 1630.450] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event4"
[ 1630.450] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 1630.450] (**) Option "xkb_rules" "evdev"
[ 1630.450] (**) Option "xkb_model" "pc105"
[ 1630.450] (**) Option "xkb_layout" "de"
[ 1630.450] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.451] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 1630.451] (**) Video Bus: Applying InputClass "system-keyboard"
[ 1630.451] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1630.451] (II) Using input driver 'evdev' for 'Video Bus'
[ 1630.451] (**) Video Bus: always reports core events
[ 1630.451] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 1630.451] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1630.451] (--) evdev: Video Bus: Found keys
[ 1630.451] (II) evdev: Video Bus: Configuring as keyboard
[ 1630.451] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input14/event14"
[ 1630.451] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 1630.451] (**) Option "xkb_rules" "evdev"
[ 1630.451] (**) Option "xkb_model" "pc105"
[ 1630.451] (**) Option "xkb_layout" "de"
[ 1630.451] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.451] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 1630.451] (II) No input driver specified, ignoring this device.
[ 1630.451] (II) This device may have been added with another device file.
[ 1630.451] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1630.451] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 1630.451] (II) No input driver specified, ignoring this device.
[ 1630.451] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 1630.452] (II) No input driver specified, ignoring this device.
[ 1630.452] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 1630.452] (II) No input driver specified, ignoring this device.
[ 1630.452] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 1630.452] (II) No input driver specified, ignoring this device.
[ 1630.452] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[ 1630.452] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1630.452] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 1630.452] (**) USB Optical Mouse: always reports core events
[ 1630.452] (**) evdev: USB Optical Mouse: Device: "/dev/input/event1"
[ 1630.452] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d80
[ 1630.452] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 1630.452] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 1630.452] (--) evdev: USB Optical Mouse: Found relative axes
[ 1630.452] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 1630.452] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 1630.452] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 1630.452] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1630.452] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1630.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1/event1"
[ 1630.452] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 1630.452] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 1630.453] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 1630.453] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 1630.453] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1630.453] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 1630.453] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 1630.453] (II) No input driver specified, ignoring this device.
[ 1630.453] (II) This device may have been added with another device file.
[ 1630.453] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event9)
[ 1630.453] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
[ 1630.453] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 1630.453] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 1630.453] (**) Lenovo EasyCamera: always reports core events
[ 1630.453] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event9"
[ 1630.453] (--) evdev: Lenovo EasyCamera: Vendor 0xbda Product 0x58e6
[ 1630.453] (--) evdev: Lenovo EasyCamera: Found keys
[ 1630.453] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 1630.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9/event9"
[ 1630.453] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 12)
[ 1630.453] (**) Option "xkb_rules" "evdev"
[ 1630.453] (**) Option "xkb_model" "pc105"
[ 1630.453] (**) Option "xkb_layout" "de"
[ 1630.453] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.454] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1630.454] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 1630.454] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1630.454] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1630.454] (**) AT Translated Set 2 keyboard: always reports core events
[ 1630.454] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1630.454] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1630.454] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1630.454] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1630.454] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1630.454] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 1630.454] (**) Option "xkb_rules" "evdev"
[ 1630.454] (**) Option "xkb_model" "pc105"
[ 1630.454] (**) Option "xkb_layout" "de"
[ 1630.454] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.454] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 1630.454] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1630.454] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 1630.454] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1630.454] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event13"
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 1630.454] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 1630.454] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 1630.454] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1630.454] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 1630.454] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 1630.454] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1630.455] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 1630.455] (II) No input driver specified, ignoring this device.
[ 1630.455] (II) This device may have been added with another device file.
[ 1630.455] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event6)
[ 1630.455] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 1630.455] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 1630.455] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 1630.455] (**) Ideapad extra buttons: always reports core events
[ 1630.455] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event6"
[ 1630.455] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 1630.455] (--) evdev: Ideapad extra buttons: Found keys
[ 1630.455] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 1630.455] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input6/event6"
[ 1630.455] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[ 1630.455] (**) Option "xkb_rules" "evdev"
[ 1630.455] (**) Option "xkb_model" "pc105"
[ 1630.455] (**) Option "xkb_layout" "de"
[ 1630.455] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.456] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 1630.456] (II) No input driver specified, ignoring this device.
[ 1630.456] (II) This device may have been added with another device file.
[ 1630.683] (II) evdev: Ideapad extra buttons: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Lenovo EasyCamera: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: USB Optical Mouse: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Video Bus: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Sleep Button: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Power Button: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Video Bus: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Power Button: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1631.376] Server terminated successfully (0). Closing log file.
Could anyone give me some ideas?

AnnS wrote:
hunterthomson wrote:
AnnS wrote:
Hi! I did try that, even though II started KDE with the inittab file. But IIt seems problems with dbus.I set variable DISPLAY to :0.And then run X and startkde.It runs successfullyalso tried editing .xinitrc and uncommenting exec startkde, but I still get the errors above when I use startx or startkde.
I also tried reinstalling kdebase-workspace and removing configuration files, but nothing. I actually doubt it's related to KDE, I think it's either xorg and/or catalyst.
There must be something I'm missing.
Thanks!
Catalyst? It looks like xorg is trying to use an Intel video card?
Do you have both ATI and Intel video card in your sytem?
Maybe I am worng...
What makes you think that?
I'm not the OP, by the way! He/she solved this and apparently had the same problem. His/her last post said "
It seems problems with dbus.I set variable DISPLAY to :0.And then run X and startkde.It runs successfully"
But I'm not sure of how to do that.
Owe sorry, I thought you were the OP. I got lost in the OP's super long Quote's.
I said that becuase the OP is running an Intel Video card
[ 1630.275] (II) LoadModule: "intel"
[ 1630.275] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
Last edited by hunterthomson (2012-12-09 05:32:18)

Can I combine my iChat logs into one?

I always disconnect or sign off and close buddy lists and that makes so many chat logs open, how do I combine it into one?

Hi,
Can you explain what you mean by Logs ?
1) iChat creates Error Logs and stores them in Your Home Folder (Little house icon)/Library/Logs/iChatConnectionErrors for failed Audio, Video and Screen Sharing attempts.
2) iChat creates Transcripts of Chats and can store them in your Home Folder/Documents/iChats and then by dated folders (Personally I wish this could be by Screen Name/ID/Buddy name).
The options in iChat menu > Preferences > Messages refers to Saving Transcripts (It is automatic in Message beta)
3) Buddy List and Text chat windows are separate items.
Using the red button top left of any window only closes that window and does not Quit the App.
Closing the Buddy Lists this way Or Logging Off which also clears them Off screen would leave all the Text Chats open (Although marking them you are Off line)
If 3) is the fact you have so many individual Text Chats open (Possibly intending to return to those chats later) and want to have them in in one window will need need us to know which version of iChat you are using.
Some need to use an Add-on called Chax.
Later versions have the option in the ichat Menu > Preferences > General Section > to link/tab the Open Chats (I forget the exact wording) Basically Apple brought Tabbed Chats to iChat later in the scheme of things
10:04 PM Friday; April 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

[Solved] gmrun & Openbox menu can't launch program but bash can.

Hey there.
Got myself a bit of a confusing problem. I recently installed the latest of Natron, in /opt/Natron, and added the path to the PATH variable in the .bashrc file, and i can launch it if I'm on bash, but gmrun and the Openbox menu can't locate the executable when I try to launch it from there. Which is weird, because when i was adding it the Natron directory to the path when it wasn't in the .bashrc, i could then launch Natron just fine from gmrun. Anyone know why this is the case? Any help is appreciated.
Last edited by anark10n (2015-02-22 16:35:17)

.bashrc is only sourced when starting an interactive shell, whereas .bash_profile is sourced when you log in. Try adding the PATH export to your .bash_profile, then log out and back in.

Exchange account verifies, but only shows folders unless logged into OWA

I was using iphone 3g with my exchange account perfectly when it was first released in July. During some point after upgrading to 2.0.1 or 2.0.2, I stopped receiving email to my exchange account. After several calls to apple, they advised it was my IT departments problem. However other people in my company are still receiving emails on their iphones.
Today, I realized that when I accessed my OWA account from my PC web browser, an email appeared in my iphone. However, only 1 email out of 9 was downloaded. It happened to be the very email that was highlighted in my inbox on OWA. As I selected other emails from my OWA inbox on my PC, they were instantly pushed to my iphone.
I spoke with some other people in my company who have realized they only receive emails if they leave their Outlook exchange accounts open all the time on their desktops. As soon as they close the outlook program, they stop receiving to the iphone. I don't have a desktop with a constant connection, and check my email via OWA when I can. Therefore, one of the reasons for purchasing Iphone. Not to mention my previous blackberry curve worked fine for me.
I am not sure what this means. I can access OWA fine from my safari browser, or any other browser. I was receiving email all the time before the previously mentioned iphone updates, nothing has changed in my IT department, and If I open OWA and select an email, it will push to my phone.
What does this mean, and how do I get the account to receive without being logged on to OWA? After all, isn't that the whole point of having exchange support on the iphone?
Thanks in advance

Fixed in update

How can I change the account logged into game center?

I've been using my friend's account on my ipad to download apps. I just recently made my own apple Id and it works fine with downloading apps. However, when I go to game center it shows her account logged in. I log her out and try to log in with my own apple I'd, but when I touch the sign in button with my id and password entered it comes at me with a popup with her apple Id asking for a password. There's no feat I can change the I'd in this window, my only options are cancel and sign in or whatever and it happens every time I try to log in no matter what I put in the id and password boxes in the game center window. Help?

Open the Game Center app.
Choose "Me" at bottom.
Scroll down
Tap "Account: [youremail]@[youremailprovider.com]
Tap "Sign out."
Then sign in with whatever Apple ID you like.

Downloaded lightroom from cloud can't launch program. Tried going to preference sighns and signed out and signed back, but still would not launch

Downloaded Lightroom from the cloud couldn't launch it. Tried going to preferences sign out and sign back in still couldn't launch Lightroom.

Sign out from Creative Cloud and Sign in .
Important : Try to launch Lightroom CC apps from Apps tab menu. :
Still unable to launch ???? let me know.

Can't launch programs

Hello,
I must be doing something very wrong since I can't start anything .
[srcds@Server5 ~]$ dir
hl2 InstallRecord.blob readme.txt Steam test2.so
hldsupdatetool.bin orangebox steam test1.so test3.so
[srcds@Server5 ~]$ chmod +x steam
[srcds@Server5 ~]$ ./steam
-bash: ./steam: No such file or directory
Any ideas? Thanks.
Last edited by 1nsane (2010-08-01 05:02:57)

pseup wrote:I assume you are running x86_64. HL dedicate server stuff is all 32bit. You will need to install lib32 stuff (lib32-gcc-libs at least), or use a 32bit chroot.
Yup that was it, thanks a bunch .

Why can't I log into iCloud on my iPad?

When I go to the iCloud.com website on my iPad, I can't log into my iCloud account. The only options are to (a) set up iCloud, which has already been set up on all my devices, (b) Install Find My Phone, which is already installed on my iPad, or (c) Install Find My Friends, which is irrelevant. There is no login window.
A previous thread suggested that installing and using the Find My iPhone app would fix the problem, but it doing so changes nothing on my iPad. What am I missing?

You can use iCab Mobile to log into your iCloud.com account on the iPad. You must identify iCab as a desktop browser. I use iCab Mobile and I identify it as Fire Fox 4.0 for Mac. I can log into my account this way.
I do NOT have iCloud email so I'm not positive that you can log into the email this way, but IF I recall correctly from reading a couple of other posts, it will work.
If you want to take a chance, download iCab for $1.99 (I think). I can tell you this much - it is a superior browser to Safari on the iPad in just about anyway that you can imagine - even if you can't access your iCloud mail.

Why can't I log into an app on my ipad when it works on my iphone? Specifically ones that require my U-verse login to view.

I am unable to use some of the tv viewing apps that require my ATT Uverse login. They apps such as NBCSports work fine on my iphone, but when I try to use it on my ipad, I get a user not authorized message.

You can use iCab Mobile to log into your iCloud.com account on the iPad. You must identify iCab as a desktop browser. I use iCab Mobile and I identify it as Fire Fox 4.0 for Mac. I can log into my account this way.
I do NOT have iCloud email so I'm not positive that you can log into the email this way, but IF I recall correctly from reading a couple of other posts, it will work.
If you want to take a chance, download iCab for $1.99 (I think). I can tell you this much - it is a superior browser to Safari on the iPad in just about anyway that you can imagine - even if you can't access your iCloud mail.

TS3276 I can't send mail but can receive mails on my macbook. However, I can send mails by logging into yahoo or gmail through Safari.

I am using a macbook pro. I am not able to send any mails from my mac. I can recieve mails, but can't send.
However, I can send mails when I log into yahoo or gmail from safari.
Please give me measures to correct this issue.
Thank You.
Neel Jain
<Email Edited by Host>

I am using a macbook pro. I am not able to send any mails from my mac. I can recieve mails, but can't send.
However, I can send mails when I log into yahoo or gmail from safari.
Please give me measures to correct this issue.
Thank You.
Neel Jain
<Email Edited by Host>

KDE can't launch programs unless logged into a TTY

Similar Messages

Maybe you are looking for