KDE does not load completely

This problem is present since about the release of 4.11 of KDE. Howerver usually 1 reboot is enough, and everything works fine again.
But today i had to restart my system 5x till finally everything is working fine.
The Problem: KDE loads only the network-applet on the systray (kmix and clipper are not visible) and it takes around 10 seconds till i can launch the kickoff-menu. After that i get a warning about my one autostart-programm, which is obviously running, and if i really want to try to run in twice. (Btw, if i choose no, then it is not loaded, which is kind of strange too). I am not able to use the reboot/shutdown option in the kickoff-menu. Dolphin or other apps seems to load fine. Only solution for me so far is to reboot the system.
Here is the output of .xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(565) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
ModemManagerQt "kded" ( 564 ) void ModemManager::ModemManagerPrivate::init() : Error getting device list: "org.freedesktop.DBus.Error.ServiceUnknown" : "The name org.freedesktop.ModemManager was not provided by any .service files"
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.8'
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
kded(564)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18'
kded(564) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTS 450/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 325.15
OpenGL shading language version string: 4.30 NVIDIA via Cg compiler
Driver: NVIDIA
Driver version: 325.15
GPU class: GF100
OpenGL version: 4.3
GLSL version: 4.30
X server version: 1.14.3
Linux kernel version: 3.11.6
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
========================> 4 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower.
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
plasma-desktop(631)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f2
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f2
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f2
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f4
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f4
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f4
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f6
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f6
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f6
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f8
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f8
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fa
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fa
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fa
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fc
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fc
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fc
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
plasma-desktop(631) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
N: [pulseaudio] main.c: User-configured server at {1da04571ceeb43369c6b10f2742a25c9}unix:/run/user/1000/pulse/native, which appears to be local. Probing deeper.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
akonadi.collectionattributetable OK
akonadi.collectionmimetyperelation OK
akonadi.collectionpimitemrelation OK
akonadi.collectiontable OK
akonadi.flagtable OK
akonadi.mimetypetable OK
akonadi.parttable OK
akonadi.pimitemflagrelation OK
akonadi.pimitemtable OK
akonadi.resourcetable OK
akonadi.schemaversiontable OK
Nepomuk Query Server not available
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl")
ksmserver(613): Couldn't start knotify from knotify4.desktop: "Fehler bei der Ausführung von „knotify4.desktop“. Entweder läuft KLauncher nicht mehr, oder die Anwendung kann nicht gestartet werden."
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
New PolkitAgentListener 0x1200220
Adding new listener PolkitQt1::Agent::Listener(0x145d2e0) for 0x1200220
yakuake(666)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
yakuake(666)/konsole Konsole::Session::run: Attempted to re-run an already running session.
krunner(659)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home/tumas/.kde4/share/apps/kabc"
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
akonadi_nepomuk_feeder(711) FeederPluginloader::feederPluginsForMimeType: No feeder for type "text/calendar" found
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
dolphin(802) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
dolphin(802)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kwin(623) KWin::GlxBackend::present:
It seems you are using the nvidia driver without triple buffering
You must export __GL_YIELD="USLEEP" to prevent large CPU overhead on synced swaps
Preferably, enable the TripleBuffer Option in the xorg.conf Device
For this reason, the tearing prevention has been disabled.
See https://bugs.kde.org/show_bug.cgi?id=322060
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kate(814)/kate-filetree KateFileTreePluginView::KateFileTreePluginView: BEGIN: mw: Kate::MainWindow(0x1da8200)
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2146e90,0x0,-1,QObject(0x0) ,"m_root")
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2147550,0x0,-1,QObject(0x0) ,"Unbenannt")
kate(814)/kate-filetree KateFileTreeModel::documentOpened: before add: ProxyItem(0x2147550,0x0,-1,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: empty item
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" ) to ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::documentOpened: after add: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeProxyModel::KateFileTreeProxyModel: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::setListMode: BEGIN
kate(814)/kate-filetree KateFileTreePluginView::setListMode: treeMode
kate(814)/kate-filetree KateFileTreePluginView::setListMode: END
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: change to unnamed item
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: removing ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(-1,-1,0x0,QObject(0x0) ) previous: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree ProxyItem::remChild: remove ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: parent ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:0) grandparentProxyItemDir(0x0)
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: inserting ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: creating a new root
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x25aa840,0x0,-1,QObject(0x0) ,"/home/tumas")
kate(814)/kate-filetree KateFileTreeModel::handleInsert: add ProxyItemDir(0x25aa840,0x0,-1,"/home/tumas", children:0) to m_root
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x25aa840,0x2146e90,0,QObject(0x0) ,"/home/tumas") toProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: attempting to merge some existing roots
kate(814)/kate-filetree KateFileTreeModel::handleInsert: adding ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:0)
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ".xsession-errors" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreePluginSettings::save: save config!
dolphin(802)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
dolphin(802)/konsole Konsole::Session::run: Attempted to re-run an already running session.
PS: The system is only 2 days old and there were no strange updates or any unusual settings/apps installed.
Last edited by tumas (2013-10-27 07:42:44)

Thaodan wrote:Can you write /var/tmp/kdecache-$USER?
What exactly do u mean? There are a few folders/files inside.

Similar Messages

WRT54G v5 admin screen does not load completely

I have a WRT54G v5 and when I go to the admin screen (http) it does not load completly. It was working the other day. I was in the process of downloading a newer version of the firmware, I am using 1.0.6 and was looking at the 1.0.9. I have it on the computer but have not applied it to the router yet.
I am using IE7 and was able to view the page previously with IE7 but am not able to now. I have rebooted the router (cold start). No difference. I can still get to the internet and the wireless is working also, I just cannot make any changes to the router.
I need help, if someone is willing.
Thanks
Dave

Check if your firewall is on. I was having the same problem and I just shut down Zone Alarm...

AppStore does not load completely

my AppStore does not load completely ipad4 btw.....I tried changing account and Internet connection but still does not work

Hi Jay ,
Try clearing your portal navigation cache , browser cache/cookies and then check .
There is a HTTP Provider cache in visual admin also , try clearing that as well .
Also , did you modify your themes after which this problem occured ?
Regards
Mayank

Theme does not load completely

Hi
The theme does not get loaded completely into the Portal page when we click on the links to the WebDynpro ABAP ( eg. ECC, BW). Also the portal font gets distorted. And this happens 50 % of the time. We have to log back in and try our luck.
Any ideas why this would happen very often? Please let me know.
Thanks
Jay

Hi Jay ,
Try clearing your portal navigation cache , browser cache/cookies and then check .
There is a HTTP Provider cache in visual admin also , try clearing that as well .
Also , did you modify your themes after which this problem occured ?
Regards
Mayank

Mail does not load completely

When I open Mail, it pretends to open, but:
1) I cannot see the viewer without clicking "New Viewer Window"
2) When I do it allows me to select mail/RSS items, but the viewer just reads "Loading" and never loads
3) It does not retrieve any new mail/RSS messages
4) When I tried to delete the last few messages (in case they caused the problem), they appear to be deleted, but only until I click on another folder they reappear.
5) Trash appears empty, when I don't think it should be.
6) I have to force quit.
I think this might have started when I closed the Macbook cover while it was loading new Mail. Also, this started just yesterday before I upgraded to 10.5.3 today, which I hoped against hope it might help.
I've searched forums the Net over. Help!

See:
*[[Images or animations do not show]]
*http://kb.mozillazine.org/Images_or_animations_do_not_load
See also http://kb.mozillazine.org/Websites_look_wrong

Swf does not load completely in browsers

Hello,
It looks like other people are having issues with
uploading/viewing, but I can't seem to find an answer to my
problem. There are pieces missing from my home page. When I go back
to the home page from the other pages (by clicking on "Lindsey
Sonu", the home page is complete. I have checked my site on three
different browsers, at all times of the day and on both a mac and
pc. I can't seem to figure out what is wrong. Please help!
www.lindseysonu.com
Thank you :)

So after hrs of searching forums and trying different things,
I still couldnt get my site to load completely until I decided that
maybe it could be a corrupt image that I used. It wasnt that
either, but then I remembered that this started happening after I
added a preloader. So I took the preloader off and now my site
loads correctly! Hallelujah! I'm still confused as to why that was
the problem. Maybe the site doesnt need a preloader b/c of its
small size. Anyway, I hope this helps anyone who comes across this
issue!

1st gen iPod Touch does not load completely

I just recently bought a 4th gen iPod Touch to replace my 1st generation one. The new iPod works fine, but the old one will not boot up. When I press the Wake button, it appears to be loading fine for about 30 seconds, but then it just stops. I know battery life isn't the issue because I had it syncing with my laptop for a few hours.

superblah wrote:
... I know battery life isn't the issue because I had it syncing with my laptop for a few hours.
But if this is your old iPod, perhaps it is the battery. It may no longer be able to hold charge, that's what happens to old batteries.
Have you tried turning it on while it's connected to power? When you unplug the iPod from any power and try turning it on, look at the battery icon (if it's there). Is it full when it turns on and what level does it show just before it turns itself off again?
Phil

When i open my email it does not load completely

when i open smartzone email in mazilla i do not get a complete download. the items ate there but you cannot see them
== This happened ==
Every time Firefox opened
== after it was updated

Hi eaglerabbit,
This is a pretty easy fix. Just go to ''Tools > Options > General'' and change the preference for what Firefox should do on startup. You probably have it set to load tabs and pages from your previous session.
If that doesn't work, you should look at the Knowledge Base article [[Preferences are not saved]].
Hopefully this helps!

Farmville game worked great on 3.6. Does not load completely on 4.0. Hate 4.0. How can I get 3.6 back?

farmville loads partially, but not completely. Only get 3/4 of the farm showing. resolution is at smallest setting. Worked great on version 3.6. I WANT 3.6 BACK!!!!!

I'm having the problem with Frontierville. It starts to load, then it disappears.

JSP / HTML page does not load correctly in IE

I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. None of the people in my team were able to solve this issue.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.
In case you need an HTML version of the code, please do mail me at [email protected]

Jaison_Sabu wrote:
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. Why would you be sending large amounts of data to a JSP? Sounds fishy to me.
None of the people in my team were able to solve this issue.Well if you provided your team with the same amount (none) of information you provided here, then I would understand.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.Personally, I think it's the flux capacitor.
In case you need an HTML version of the code, please do mail me at [email protected]
Hope you're ready for some spam.

YahooMail in FireFox Only is not loading completely. Icons, Flags, Scrollbars etc not showing up

This does not happen in IE, only FireFox. When Yahoo Mail loads it does not "Load" completely. Icons, Flags, Scrollbars, direction arrows, etc. do NOT load. The functions still exist and work, but if I didn't already know where some of them are located it would be impossible to use them because the "visual icons" do not show up.

See:
*[[Images or animations do not show]]
*http://kb.mozillazine.org/Images_or_animations_do_not_load
See also http://kb.mozillazine.org/Websites_look_wrong

Application based on JMF does not load the complete Video

Hi folks!
I programmed a small application using the JMF. Among other things, this application should load an play video files. But it does not load big video files completly.
One of my video files (MJPG, 720x576, FrameRate=25.0, Length=999424 28 extra bytes) is 10 minutes long and is pretty huge. It takes 2,1 gigabyte disk space.
My application loads and plays only 5 minutes of this video. But the VLC media player, windows media player and other video player does play the complete video.
However, the JMStudio has the same problem.
Any ideas?
I'm looking forward to your replies!

It's taken quite a long time for me to get a resolution. I have a feeling each situation is unique. I tried many of the solutions offered both in this forum and in other ones found online, including Flashplayer forums.
It didn't make sense that I can view videos from virtually everywhere but I could not from Fox News and CBS. Something was in conflict but I couldn't figure out what.
It turns out I had an issue with Doubleclick.net. In Internet Options - Security - Trusted Sites - Sites is where you need to go. If you find this is a restricted site - remove it. In my case, it was not there but I added the following to my trusted sites - https://*.Doubleclick.net and low and behold all is well. I watched a number of Foxnews videos and I finally got to see CSI from CBS online.
How this happened I'm not sure but sometime ago, I had this crazy notion of opting out of advertising via AOL. A number of email accounts are through AOL and I suspect something got corrupted as a result.
I hope this can resolve this issue for some of you who have this problem but looking at internet options via your control panel appears to be the least aggravating area to start!

IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update

I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
I keep Automatic Updates on and they install as soon as they are available.
Everything on my PC was running fine 11/25/13.
I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
It also seemed to affect Firefox which does not completely load pages either.
Any shove in the correct way to help solve this would be helpful.

Robert -
Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful. However, your response is inadequate on two counts.
First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows. Of course it would
help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft. Even if the exact cause is found, it is not likely that anyone here will
be able to fix the problem. There are literally hundreds of people complaining about this problem in multiple forums. If you know your consumer behavior metrics, then you know that means tens of thousands are affected. This is systemic, not
a random problem on a few errant machines. Microsoft needs to know that they have a major problem on their hands and they need to fix it. I saw this problem starting with IE 10. Is it any wonder that in that time, IE usage has fallen greatly
while Chrome has become the dominant browser? (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
IE.)
So thanks Robert for all your help in the past, but this response isn't helpful.
Microsoft, are you listening? Fix your browser.

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

KDE does not load completely

Similar Messages

Maybe you are looking for