KDE does not redraw window content

hi everyone,
i am currently on testing and kde-unstable and have the latest packages. on my thinkpad t430 with ivybrigde graphics windows to not redraw properly anymore. sometimes it gets updated after some time or just partially. i still can click into windows and they react, just not visually. they get redrawn when i move them around or maximize them. it also seems to be a qt-only issue, since chromium works like a charm.
is anyone able to reproduce this?
greetings and thanks in advance for any help :-)

I'm having the same problem, but i had it in kde 4.10 too.
Ati hd5650 here, with opensource driver.

Similar Messages

[SOLVED]KDE does not remember window state, restoring from System Tray

Hi,
I'm facing a problem with some KDE applications that dock in the system tray, like Amarok and Konversation. I like to keep these apps maximized. But when I restore them from the system tray, they always revert back to their original, unmaximized size. Is there any workaround or fix for this?
Using KDE 4.3.4-2 (not KDEmod)
Thanks.
Last edited by codemon (2009-12-08 08:56:16)

Funny thing happened. I tried out your suggestion for my Firefox window, which would always start in an un-maximized state. It worked perfectly. Then I opened up Konversation and Amarok, and found that they properly remember the window state now!
Thanks for the help.

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
Still am curious about the memory usage, though.

Firefox window sometimes does not redraw after I close a tab

This started a while ago and has persisted through multiple updates of Firefox and my display drivers. It's straightforward: sometimes when I close a tab (via keyboard or mouse) Firefox does not redraw its window and I am left looking at a "ghost" version of the tab.
If I move my mouse over the window I can see it responding to links in the tab that Firefox has switched to, but the display will not update until I do something to trigger the browser to redraw its whole window (e.g. resizing it).
I am using Firefox 36 beta and have a GTX 560 Ti graphics card with the latest Nvidia drivers. As I mentioned above though, this issue has been around for a while and is not specific to the version of Firefox (I don't normally use betas) or drivers I am currently using. I don't have problems in any other program.
Has anyone else experienced this?

You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*<b>about:config</b> page: <b>layers.offmainthreadcomposition.enabled</b> = false
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this -
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
P.S: We use windows authentication in our environment.

Hi IMSunny,
It seems you have solved this issue based on your another post.
http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
Thanks
Daniel Yang
TechNet Community Support

WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
Does anyone have any suggestions on how to solve this probelm?
Here is the error:
The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">

I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
Hi,
I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
{"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
I do have windows Activation Features installed and I am using .Net Framework 4.
Thanks
Sofia Khatoon

Image blanks when clicking with Polygon Lasso - does not redraw

When I am in an image, selecting an area with the polygon lasso tool, every time I click a point, the image blanks out and does not redraw. I am left with my pologon selection lines and a white image where the photo should be.
The only way to get the image back is to force it to scroll. I have to extend the tool off one side of the image or another to make it scroll. Otherwise the screen does not redraw. I am forced to work with my images in a window instead of fullscreen to ensure that I have part of the image to scroll to when the image blanks out. It is doing this with every click of the polygon lasso tool.
Needless to say, this is maddening! Has anyone seen this behavior before?
I am running Adobe Photoshop CS3 on Windows XP and the program is up to date. I have two gigs of ram and have moved up the memory allocated to Photoshop from half to two thirds. I have stopped having other programs opened. I also tried turning off the preference for the 3D graphics acceleration. So far nothing has worked to fix the problem.
I have about 1100 product photos to clip out - HELP!
Many thanks,
Lynne

I have reset the prefs, first for the polygon tool, which did not fix the problem. Then I held down the keys on startup and told it to delete the prefs file. I am still having the problem, although not on every single click. It has become intermittant, which is bizarre!
This laptop was recently completely reformatted and reloaded with everything when they passed it down to me.
I checked my video driver and it is up to date. I am on a Dell XPS Gen2 laptop running NVIDIA Gforce Go 6800 Ultra. Unfortunately the NVIDIA site is referring me back to Dell for the driver, and the Dell driver has not been updated since 2005. Oh, the joys of running on older equipement!
Lynne

JD12 JSF designer does not redraw

I am having many issues in JD12 JSF designer.
One is that when I for example select a navigation button's spacer and change it's Width property, the space between buttons does not change until file is closed and re-opened. Is that expected behaviour? Dropping an operation onto the navigation button is very tricky as well. Even when selected is 'Panel group layout', sometimes a rebinding window comes up. The space where a button has to be dropped is so narrow and volatile, that dropping a button becomes a torture that I have to repeat 2-3 times before it actually drops exactly one button (and does not rebind or drop 3 copies of it).
Another is that when I am changing table column Sortable and Filterable properties, they take 2 times to change the selected values from default to true or vice versa. The green dot does appear in front of property name, but drop down reverts to default (or previous value whatever it was). Suppose I changed Sortable from default to true - it did not change. Then I am changing Filterable in the sam manner and it does not redraw, but Sortable now does. Then I have to change sortable to the same new value again and Filterable now changes. Very annoying. Is there a fix?
Selecting the controls is bugged as well. Suppose I selected a table column and changed its Row header property to true, then went on to change another one. When I click another column, it does not select, but a baloon pops up which contains a binding for that column. To close it I have to click elsewhere and re-click the column again. Why is that happening?
Suppose I dropped a panel border layout onto a facet. Undoing that does not visually remove the border layout from a form. Only closing a file and re-opening will re-draw. Similarly, I am adding a navigation button from Operations, but the buttons do not re-draw to show that a new button was added. Same as previous, only closing/re-opening a file shows a new button. Royal PITA. Is there a fix?
Suppose I am changing initial size of a table. The number by the right corner changes showing the new size, but after the bottom border is released, the size does not re-draw. Only closing and re-opening a file shows the new size.
Resizing table columns is painful. When a column is shrinking, the columns to the right of it do not move accordingly - they stay put and the width of the very next column is increasing. Thus it is absolutely impossible to arrange the columns that are beyond visible width of the table. When the column is growing, the columns to the right of it behave erratically - often they suddenly increase their width and disappear beyond the right table border. This is simply infuriating.
The last is that if the data controls dropped onto the page contain columns from more than one table, then resulting application will throw runtime exceptions (null pointer). But if I deleted all columns but that very object's own columns, and dropped it onto the page, then it will work. After that I can add any columns from that object and it will work fine. The Create Table wizard clearly creates defective code.
I am running JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668 under Windows 7 32bit. Are these issues fixed in a more recent build or going to be fixed soon?

You are not understanding the term 'narrow space' I've used. It does not equal 'width of spacer between the buttons. It equals the area of display monitor where an orange drop indicator appears that supports dropping a new button in between the existing ones. I.e. where JD12 is allowing me to drop a new operation without rebinding the existing buttons.
The JDK version is the one that JD12 itself installed - 1.7.0_15. As that's the JDK that was shipped with JD12, I contend it has to be sufficient.
There is no Mcaffee on this machine. They are using Symantec AV. There is about 300-500 MB free RAM when these issues are occurring and CPU load is about 0%.
Another issue I just noticed is that javadocs are not loading. Doc Path for JDK 1.7.0_15 that came with JD12 is set to http://docs.oracle.com/javase7docs/api/ and there is no doc under the folder where JD installed its JDK. I don't know how to fish docs for an older JDK out of Oracle web site.
As you contend that it is my system that is a root cause, I looked up the system requirements for JD12 and found that my system exceeds them.
Oracle&#174; Fusion Middleware System Requirements and Specifications
Resource
Recommended Minimum
Value
CPU
Intel Core 2 i5 or equivalent
Memory
3 GB of RAM on 32-bit systems
4 GB of RAM on 64-bit systems
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
3 GB for Studio Edition
90 MB for Java Edition

I have an Ipod Touch 4g. My computer broke. I have a new computer now. My problem is that my new computer itunes library does not recognise the content already on my ipod. Help please

I have an Ipod Touch 4G. My computer broke. I now have a new computer . I have NO access to old computer. The itunes on my new computer recognises by Ipod but not the music content already on my ipod. This means it does not show the content in the library on itunes any more. The content on my ipod is not purchased from itunes store. Can i get it to show up in the `new` library? Is this also preventing me from downloading new items into my ipod - as i can download new discs into the library, but they will not load into the ipod. Your help would be appreciated - cant bear another sleepless night. Thank you

I dont know how helpful this will be but here we go:
try syncing your ipod again
do you still have these cds? try reburning them to you library
restart itunes
restart the computer
hardware reset ipod touch
Heres how to do this
Hold down power and home button at the same time until the screen goes black, ignore the slide to power off arrow
Idevice will now restart on its own, this might take longer then when waking it from shut down
6. now try step 1 again
note: try any of these ideas they are not a set order of instructions

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

The content type of the response message does not match the content type of the binding

I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
'<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
        <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
.7em;color:black;}          p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
}          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
It is not written using WCF ... any workarounds?!
Thank you.

Hi Raj Krish,
For ASP.NET related issue, please post to the following forum:
http://forums.asp.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Does not start windows and just show me the HP System recovery window

Hello,
I have a HP G60-445DX Notebook PC. When I start the PC just open the Recovery Manager and does not open windows.
I have an upgrated Windows Vista to Windows 7 version and do not have any installation CD just the ones which were send for the upgrade (HP Upgrade Manager and Windows 7 Home Premium Upgrade Media).
I do not want to run the System Recovery since I need to recover some files. How can I run windows? I do not have any installation CD and if I need which one Vista or Windows 7? Could you please advise me?
Thank you for your help!

Hi,

Itunes does not pass windows logo testing to verify CD/DVDrom drives, Why?

Hello All,
When I try to install Itunes 9.2 on my XP 32bit machine, I get the error message "Itunes does not pass windows logo testing to verify CD/DVD rom drives this software will not be installed. Contact your administrator" I am the owner & my account has administrator rights. When I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
Thanks
Lacanox

When I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
That sounds like the GEAR drivers that iTunes uses for burning and importing aren't going in properly. (or there's damaged GEAR drivers for an old install stuck on the PC.
Perhaps manually uninstalling and reinstalling the GEAR drivers can get you past this. There's instructions for that on the GEAR wiki:
[DRIVERS: Windows - Updating, removing, 64 bit versions, etc|http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:Windows_-_Updating%2C_removing%2C_64_bit_versions%2Cetc]

PSE_13 Editor does not recognize Windows 7 but the Organizer does? How do I fix this?

PSE_13 Editor does not recognize Windows 7 but the Organizer does? How do I fix this?

Try making separate desktop icons for the Editor and Organizer. You can then launch directly. The standard desktop icon is for the welcome screen which often runs in the background or doesn’t shut down properly.
Start by right-clicking on the desktop and select:
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Photoshop Elements 13
Inside the Photoshop Elements 13 folder make sure you select the application (not a shortcut) by scrolling down to the files beginning with the letter P and highlighting ‘PhotoshopElementsEditor’
Then click next followed by finish.
You can repeat for the Organizer using the different file path.
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Elements 13 Organizer
Highlight ‘PhotoshopElementsOrganizer’
Then click next, followed by finish.
Now that you have your separate desktop icons you can delete the one for the welcome screen, if preferred.

KDE does not redraw window content

Similar Messages

Maybe you are looking for