KDE Frameworks 5 not working?

I installed kde framworks 5 (kf5 and kf5-aids) packages and seems to be installed fine.
But when I login I get the same old kde 4.13.x system, how do I switch to kf5? Nor I see any changes to apps design and layout.
Regads

^^ I get it, but the kde version and everything else (looks , icons) was supposed to be changed with this update. I don't see a single change in my system

Similar Messages

  • KDE applications not working

    Whenever I try to start a KDE application( I use XFCE ), I get an error saying that the DCOPServer could not be started and dynamic linking is not working. I dont know if it affects all the applications, but the following do not work for sure. Could someone please tell me how to rectify this? I have a lot of data which I stand to lose
    msid ~ $ basket
    Dynamic Linking is not working
    If you are on BSDDid you specify the correct libc file during installation
    Dynamic Linking is not working
    If you are on BSDDid you specify the correct libc file during installation
    DCOPClient::attachInternal. Attach failed Could not open network socket
    Dynamic Linking is not working
    If you are on BSDDid you specify the correct libc file during installation
    DCOPClient::attachInternal. Attach failed Could not open network socket
    DCOPServer self-test failed.
    kdeinit: DCOPServer could not be started, aborting.
    msid ~ $ /opt/kde/bin/amarok
    Dynamic Linking is not working
    If you are on BSDDid you specify the correct libc file during installation
    : cannot connect to X server :0.0
    msid ~ $ kile
    Dynamic Linking is not working
    If you are on BSDDid you specify the correct libc file during installation
    Dynamic Linking is not working
    If you are on BSDDid you specify the correct libc file during installation
    DCOPClient::attachInternal. Attach failed Could not open network socket
    Dynamic Linking is not working
    If you are on BSDDid you specify the correct libc file during installation
    DCOPClient::attachInternal. Attach failed Could not open network socket
    DCOPServer self-test failed.
    kdeinit: DCOPServer could not be started, aborting.

    Please don't cross post. Any help should be directed here:
    http://bbs.archlinux.org/viewtopic.php?id=62316

  • Change masthead text away from welcome - homepage framework not working?

    Hi,
    I've  trawled through countless threads without getting a clear understanding on this...
    I'd like to change the masthead text from Welcome <username> to  Hello <username>
    I thought I could do this by changing the text for the Header in the homepage framework (SAPDEFAULT) but someone in a another thread mentioned that this change doesn't work on later versions - not sure if they mean't portal of backend (we're using NW7 and ERP6.0).
    Can anyone advise what's the reccomended method for doing this?... or should the homepage framework change work?
    Regards
    Phil

    Hi Jay,
    Thanks for this. I've followed your steps through and the Z copy of the class returns the expected result in debug. I've assigned the class to the SAPDEFAULT header but the old text 'welcome' still shows in ESS.
    Can you advise?
    Also, can you clarify if/why/when the "text" field in the homepage framework header is redundant for ESS changes? The help text isn't helpful in this respect!
    Thanks
    Phil

  • KDE keybindings not working 'Keybinding could not be found'

    Hi
    Context:
    Running arch linux with all the latest updates
    9:30 AM - 14 Feb 2012
    Until yesterday I have been using openbox + tint2 + kupfer
    Starting from today I wanted to try something new: KDE!
    So I did minimal(!) install
    Problem
    Some keybindigs are not working anymore
    Volume Up, Volume Down, PLAY/PAUSE , ...
    Also in Kupfer when I try to set launch keybinding to: SUPER+a it says ' Keybinding could not be found' ... however SUPER + SPACE does work.?
    Could you give me some advice / tips on where to start looking?
    Thanks !
    Last edited by tgoossens (2012-02-14 08:29:31)

    It might have something to do with KHotkeys
    i'm now checking out this post
    https://bbs.archlinux.org/viewtopic.php?id=67396

  • KDE apps not working in Openbox, Fluxbox, or XFCE [solved]

    Whenever I try to run any KDE apps in Openbox, fluxbox, XFCE etc. it gives me "no such file or directory" or "command not found" or what have you. Everything works fine in KDEmod but the only KDE app I've made work in anything else was ktorrent just for a test. It's like they don't even exist outside of KDE. I've been very successful at moving to Openbox besides this, and it's VERY frustrating because I really want some of these programs. Any ideas?
    Last edited by ahunavairya (2008-10-02 00:05:43)

    good deal
    If you want to configure your xfce menu, you can add .desktop files to /usr/share/applications.  k3b.desktop could be something like:
    [Desktop Entry]
    Name=K3b
    Exec=/opt/kde/bin/k3b
    Icon=/opt/kde/share/icons/hicolor/48x48/apps/k3b.png
    Type=Application
    Categories=GTK;AudioVideo;
    Encoding=UTF-8

  • OEL5.1 and KDE does not work

    I've installed OEL 5.1 on plain hardware and in a VM (VMware Server 1.0.5) only with KDE.
    But on both systems the KDE desktop doesn't start. After the login I get only a red screen and the mouse pointer, nothing else.
    Is KDE with OEL not usable? Any ideas?
    Thanks
    Ralph

    Can you boot either machine into console mode (run level 3)?
    If so, can you:
    # /usr/sbin/system-config-display
    and make sure your video card is recognized. If your monitor is not recognized, try setting it to a generic video/lcd device at 1024x768. Exit out of system-config-display and then try to run X11 manually:
    # startx
    It should either start or leave you an error log. The console screen will point you to the X11 log file.
    If this doesn't work, please show:
    1) Your video hardware type
    2) Your monitor/display type, manufacturer and model
    3) The content of "/etc/X11/xorg.conf"
    Cheers

  • NWDS 7.3 - extension framework not working

    Hi experts,
    I m trying to build and run an extension framework on a different requirement on the lines of this. I have defined it on the task extension after successfully deploying it on the connected AS JAVA. But I'm not getting any result on the IdM UI. There is already another EAR deployed not by me, which is running good. I have created everything from scratch with new names and servlet not as IdMRegisterServlet. Should there be any problem due to that ?
    Because when I looked into the application tc~idm~jmx~app I could find only IdMRegisterServlet and not the one I designed.. Though I have meticulously followed the steps while deploying. If this is the case how will I be able to register it in the tc~idm~jmx~app ?
    Any advise would be a Lifesaver.
    Thanks
    Rimesh

    Hi Rimesh,
    I guess the problem is not in the name of the servlet. You can use any name.
    Please check:
    1. If the application-j2ee-engine.xml of your new extension application contains a reference to
    tc/idm/jmx/app application:
    application-j2ee-engine xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance
    xsi:noNamespaceSchemaLocation="application-j2ee-engine.xsd">
    <reference reference-type="hard">
    <reference-target provider-name="sap.com"
    target-type="application">tc/idm/jmx/app
    </reference-target>
    </reference>
    application-j2ee-engine>
    2. Check if your servlet is part of the web.xml of the war project:
    <servlet>
    <description></description>
    <display-name>IdMRegisterServlet</display-name>
    <servlet-name>IdMRegisterServlet</servlet-name>
    <servlet-class>testcustomer.idm.impl.IdMRegisterServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    If that does not help just write me.
    Kind Regards,
    Stefan

  • Struts validation framework not working

    Hi
    I created a very simple webapp and using struts validation framework. But, it always give me validation errors even i filled out all the required firled information. i have my struts-config included the plug-in, points to the location of validation.xml & validation-rule.xml, and i have the validate set to true, and an input point to the page when validation fails, plus my formbean to extend the validatorForm. But, no matter what, it always pass the validation. in other words, the validate method in the validator always returns 0 errors. Any ideas what might be wrong? or any suggestions of how i can debug it?
    Thanks a lot.
    cc

    There is an bug in Sun One App Server
    U need to add permission for delete in the server policy file
    please refer to
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4803631

  • "xsnow" and "xpenguins" do not work in kde.

    I notice that running xsnow or xpenguins in kde does not work. Namely, when run in the command line, it fully appears to work, but it does not display any snow or penguins. What is the simplest way to make it display the snow or penguins?

    Please post in the InDesign forum. This forum is for sutie specific issues only.
    Bob

  • My DotNet application does not work after installing Framework 4.0 on My client PC

    HI 
    I created application in Visual 2010 therefore I need framework 4.0 to work my application on client PC but it is still not working. 
    I have few forms in my application. 
    Form contact has controls Textbox, labels, button on it. (This form works fine absolutely ) 
    Form Invoice has DatagridView, textbox, label,button . (This form is NOT working at all, give me an error) 
    Any bright suggestion will help me to NOT install whole carp of visual studio 2010 on my client pc and also save Space. 
    Thank you in advance

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Audio captcha is not working in mac safari 5.1.7. We used below code snippet that is working in other browser like IF 7,8,9, crome and firefox. Audio refresh is also not happening. When submit Audio Captcha then jcapcha framework giving InvocationTargetEx

    Audio captcha is not working in mac safari 5.1.7.
    We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
    Audio refresh is also not happening.
    When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
    <Edited By Host>

    Audio captcha is not working in mac safari 5.1.7.
    We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
    Audio refresh is also not happening.
    When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
    <Edited By Host>

  • Dbus/Hal automount not working in KDE

    Hi
    I have set portmap dbus hal in rc.conf.
    In Gnome automount works great but in KDE automount does not work and I don't know why.
    Can someone please help?
    All I want to have is when I insert cd,dvd,usbstick to have them automount.

    Thank you for your reply.
    I am looking forward to your next release...

  • [SOLVED]Login manager in KDE 4.3 does not work!

    This is a fresh install (just two days old and installed KDEbase just yesterday), and almost everything is working like a charm the only glitch I have experienced till now is that the login manager module in System Settings is not working as it should be. When I click on its button I know that it should normally ask me for my password but it does not do that and therefore when it opens up all the settings are greyed out and thus unchangable . Is this a bug or am I missing something (Anyone else experienced this!)?
    Also, although not related to this topic, can somebody tell me where to find the setting for making windows shift to different workspace while dragging them through the edges of the screen. I'm sure I found this setting under Window Behavior>Window Behavior module in Kubuntu but it is nowhere to be found on the Arch KDE.
    Last edited by bhadotia (2012-02-16 00:49:32)

    bhadotia wrote:Also, although not related to this topic, can somebody tell me where to find the setting for making windows shift to different workspace while dragging them through the edges of the screen. I'm sure I found this setting under Window Behavior>Window Behavior module in Kubuntu but it is nowhere to be found on the Arch KDE.
    As nobody answered this question, I guess I'll just mark this thread as solved as even after a lot of search I'm unable to find the preference and so none of the arch users here know about it as well. I think that feature was kubuntu specific and as Arch ships vanilla KDE I think its useless trying to find it here.
    Anyways thanks for the help guys

  • [SOLVED] (Auto)mounting in KDE not working after switch to systemd

    After I switched to systemd (everything else works fine now) I cannot mount any disk (CD/DVD/USB disk) with KDE 4.9.2.
    I only get the error message "cannot mount the following device: [...]".
    This is also the case when logged in as root, so it's probably not a problem with permissions.
    Manually mounting works fine.
    These lines show up in syslog when attaching a USB disk:
    Nov  3 12:04:49 localhost kernel: [  310.752533] sd 5:0:0:0: [sdb] Attached SCSI removable disk
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** ADDING /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** UPDATING /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** ADDED /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** EMITTING ADDED for /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** ADDING /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb/sdb1
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** UPDATING /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb/sdb1
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** ADDED /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb/sdb1
    Nov  3 12:04:49 localhost udisks-daemon[752]: **** EMITTING ADDED for /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0/block/sdb/sdb1
    Nov  3 12:04:51 localhost udisks-daemon[752]: **** USING MOUNT OPTIONS 'uhelper=udisks,nodev,nosuid,uid=1000,gid=1001,shortname=mixed,dmask=0077,utf8=1,showexec,flush' FOR DEVICE /dev/sdb1
    The error is only displayed in KDE, does not appear in the log.
    I have no idea where to look for a missing or wrong setting, so I would appreciate any advice.
    If you need more information about my system, feel free to ask.
    Last edited by iromeister (2012-12-12 17:39:47)

    I'm not sure I really agree with IgnorantGuru in that I used to use a script which mounted my floppy with udisk --sorry old school--and with the systemd change, I now only had to change my script back to the KISS principle of mount and umount, without udisk, to make it work.  I don't understand all the complaints about the direction arch is going.  To me it's the same as it's always been.  Arch is for competent linux users, simple as that.  If you don't want to do the work and figure it out--as best you can--on your own, then the forum is your friend. 
    edit: @alwaysanoob:  Recently, with the change away from consolekit to logind, check to see if your polkit.service is active as many posts are showing that the polkit upgrade is not always activated due to conflicting group id's.  I myself had this problem as polkit was trying to use group id 102 which was already taken by an old install of gdm--which I had to remove--before the polkit.service could be started properly after a reinstall of polkit
    Last edited by bgc1954 (2012-11-05 05:03:48)

  • Spry Framework for Ajax does not work on google chrome

    I downloaded this beautiful gallery to use it on my site    http://adobe.github.com/Spry/demos/gallery/index.html
    Everything ok on InternetExplorer and Firefox but it does not work on Google Chrome.
    Can you help me to solve this problem? 

    sorry but this forum is for questions about JavaScript inside Acrobat and not general language frameworks. We don't have a discussion topic for Spry.

  • Ctl+C/ctl+V not working on FF 30 (Linux Debian SID, KDE)

    Since an upgrade to Firefox 30 copy (ctl+v) is not working. The "Linux-Way" (marking with left mouse button, copy with middle button) works fine. Any solution available or is it a bug?
    Many Thanks
    Anton

    Do other Ctrl shortcuts work?
    Do Ctrl+Insert and Shift+Insert work?
    *Copy: Ctrl+C or Ctrl+Insert (Mac: Command + C)
    *Paste: Ctrl+V or Shift+Insert (Mac: Command + V)
    *Cut: Ctrl+X or Shift+Delete (Mac: Command + X)

Maybe you are looking for