KDE, HAL, cannot open the non-latin mount point

I just installed ArchLinux for a few days and there is a problem here: I use KDE and hal, USB disk and CDROM can be auto-mounted. But if the USB Disk lable or CDROM label is non-latin characters, KDE, actually, Konqueror cannot open that mount point.
I think my charset is correct because in konqueror, the directory name of the mount point is correct. When I try to open this directory, konqueror complained that she cannot open that directory and the directory name which the error message dialog shows is wrong.
Any ideas? Thanks a lot.

kartwall wrote:
Problem solved -- modify the HAL mount point, so HAL will not use disk's lable to create a directory as mount point. Although this is not a perfect solution, but it works.
http://mail.kde.org/pipermail/kde-fr...il/000545.html
I think this is the page:
http://mail.kde.org/pipermail/kde-freeb … 00545.html
http://www.centos.org/modules/newbb/pri … SC&start=0
fifth and sixth post

Similar Messages

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

Hi there,
i hope i'm in the right board.
I recently tried to compress avi-files i collected from various cameras throughout the last years.
At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
So i gave it a last, let's call it fail-proof, try:
I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
Thanks in advance
Markus
P.S.
I'm using LabView 2010 and VAS of 02/2014.

Hello Markus,
have you had a look at this:
Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
Compressing avi files-Discussion Forums
Regards,
eletra

We cannot type Polish (non-latin) characters in WebDynpro applications

We cannot type Polish (non-latin) characters in WebDynpro application (in runtime) because 'Browser Help Shortcuts' are fired.
To type a polish character in polish keyboard you need to press AltGr + letter (ie. AltGr + a/c/e/s/o/l/z/x/n). To type an uppercase polish character you need to press AltGr + Shift + letter. This comination is in fact the same as pressing Alt + Ctrl + Shift + letter (because AltGr produces Alt + Ctrl) and it fires some of 'Browser Help Shortcuts'. For example AltGr + Shift + O should produce a letter O with a dash on it's top but instead it fires 'Show nesting of HTML containers'.
We tried to turn off sap-wd-lightspeed, but then other key combinations are reserved for u2018Browser Help Shortcutsu2019.
We need to be able to use AltGr + Shift + a/c/e/s/o/l/z/x/n in runtime.
Product: SAP NW 7.11 SP04
WebDynpro for Java
I hope there is a somewhere a hidden parameter that solves our problem Maybe we're in some kind of debug mode?
Thanks for your help!!

The funny thing is that bold font [when message unread in message list] shows OK, ie in greek, but when i click on unread message, it is assumed to have been read, so it changes over to medium [non bold] and the encoding changes as well into the one that is not greek and thus unreadable. In ~/.sylpheed/sylpheedrc the fonts are:
widget_font=
message_font=-microsoft-sylfaenarm-medium-r-normal-*-*-160-*-*-p-*-iso8859-7
normal_font=-monotype-arial-medium-r-normal-*-12-*-*-*-*-*-iso8859-7
bold_font=-monotype-arial-bold-r-normal-*-12-*-*-*-*-*-iso8859-7
small_font=-monotype-arial-medium-r-normal-*-12-*-*-*-*-*-iso8859-7
In /etc/gtk, for gtk1.2 apps the file refering to greek encoding [el] seems to be fine [exactly the same as in slackware 9.1].

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

Cannot open the file: mk:@MSITStore

I just upgraded to RoboHelp 8 for Word (Office 2007, XP Pro) and continue to have this problem after compiling a project (Microsoft HTML) and clicking on view. One suggestion was to change the path closer to the root directory. I changed the output path the C:\ (can't get any closer than that!) and that didn't help. I searched the forum for a definitive fix but haven't found one yet. The file opens fine using explorer but it's obviously a pain-in-the-butt to have to always do that. Thanks.

I also compile my Help projects using the .chm format. I have a handful of users at one site that are not able to open the Help files. When they click on the Help from the application, it looks like it thinks about it, but then nothing happens. When I had them try to open the Help files directly from their local directory, they received the following: Cannot open the file: mk:@MSITStore:C:\Program Files\....\HelpFile.chm.
I have tried recompiling the .chm file. I have tried recompiling the .chm file so it was closer to my root directory. I have had the client "Unblock" the Properties of the .chm file. None of these solutions fixed their issue. (I posted the .chm file on our ftp site for the user to save down and replace their other Help file.)
Besides the things I've tried, other posts suggest the users go into their registry files to manipulate the Hhctrl.ocx. What other solutions are out there? I don't think I can feasibly tell another customer that they should try to update their registry files. I am able to access the HelpFile.chm from multiple computers from our site and have not had issues.
Thanks for your help!

Error opening CHM file (Cannot open the file: mk:@MSITStore)

Hi,
I'm getting an error opening a CHM file (Cannot open the file: mk:@MSITStore). I have tried the following solutions, but neither of them worked:
Deleted the CPD file, reopened the project, and recompiled.
Ran MJ's Diagnostics report and recompiled.
I'm using RH10 and Windows 7.
I have lots of other projects, and none of them result in this error. I can't think of anything else to fix it. I have seen a few threads on this issue, but none of them have lead me to any solutions that work for me. I'm hoping that starting a new thread will provide visibility and allow someone to share a solution.
Thanks,
Amy

---UPDATE---
I was able to fix this by generating the WebHelp and then regenerating the CHM file. I'm not sure why this worked, but it did.
However, I'm also seeing this issue with a different project now, and this "fix" isn't fixing that one. So I still need an actual solution. At least for now, the first project is "fixed."
Thanks!
Amy

"Cannot open the file"

Hi.
I was working with CS6 when I exported a file to pdf and saved it later this morning. Now I'm trying to open it but I recieve the next message:
"Cannot open the file xxxx.indd. Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."
Also, the file seems to be like 5 GB of weight or so.
Anyone has any solution? I've checked a few posts of this discussion forum about the same message but none of them was helpful for my case.
Thanks in advance and excuse my English.

You seem to already understand that the file is corrupt, so there's little probability that it can be recovered in ID. One possibility, but one I've not used successfully yet, can be found at Adobe Community: Program for restoring corrupted InDesign documents (for Windows only)
Another possibility is the paid service from Markzware: Bad InDesign or Quark File Recovery Submission Form
I have used that service, and it recoverd the text from a very long file successfully, but the index markers were lost, so check your results carefully if you go that route.

CS4 "You cannot open the application Adobe InDesign CS4 because it is not supported on this archit

Just installed CS4. Ai and Ps open fine. i get this prompt with InDesign.
You cannot open the application Adobe InDesign CS4 because it is not supported on this architecture.
any clues on how resolve this?
thanks!

I'm having exactly the same problem with InDesign from CS4 Design Standard (Photoshop and Illustrator both work), and I don't know what to do. I've called up the Adobe support line five times, and received five different answers, none of which have worked (and on three other occasions, my call was dropped, once after an hour on hold).
One of the Adobe tech support people said to me "None of CS4 works with either 10.5.8 or Snow Leopard. We will issue a patch for that soon" - which directly contradicts what Adobe itself says on this site. I also went to see a Mac Genius, who couldn't help either.
I have a 2GHz Macbook with 2GB RAM running 10.5.8. I've run the uninstall, and the Adobe Clean Script, I've repaired permissions on my drive (which isn't case sensitive), restarted, reinstalled, tried installing on an external drive and then tried downloading the trial, in case it's the install CD - nothing works.
Any suggestions, anyone? Might there be a problem with my library that is stopping the install? Something else?? I bought CS4 for InDesign primarily, this is not good.

Help!! I changed my log in screen to show a blank name and pw. Now I cannot open the computer???

Help!! I changed my log in screen to show a blank name and pw. Now I cannot open the computer???

1.Turn on the computer and when you hear the startup chime hold CMD+S. This boots the computer into single-user mode, giving you root access.
2.Once single-user mode loads (it looks like a black screen with white text) mount the hard drive. So at the prompt type in:
/sbin/mount -uw /
3. Now that the drive is mounted we can edit the file system. We need to delete a file that tells your computer that you have completed setup. So type in:
rm /var/db/.applesetupdone
4.We need the system to reboot so it can check for the file and not find it. Type in:
reboot
5.Continue setup
Be sure to select “DO NOT TRANSFER MY DATA”.
6.Finish setup and login.
7. Go to system preferences and edit that account so it HAS A NAME.

Cannot open the Microsoft Jet engine workgroup information file

Hi,
I have 4 linked servers in a SQL Server database. One of them is another sql server database. This one works fine. I have 3 that are Access databases. Last week I could run a query against these linked servers, but now when I open SQL Server Management Studio I get something like the following:
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "HRDB" returned message "Cannot open the Microsoft Jet engine workgroup information file.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "HRDB".
What does this error mean? I've looked at several posts, but none apply to my problem. I've looked to make sure there wasn't a .ldb open. Anything else I've missed?
Many thanks,
Mark

The key error is "Cannot open the Microsoft Jet engine workgroup information file". Here is a suggestion from a AccessMVP.
Are you using ULS (User Level Security) in Access, with a custom workgroup
information file (*.mdw)? If so, you may need to replace this file using a
copy that you should have backed up.
If you have not specifically implemented ULS, then you're still using it,
but you are joined to the file named System.mdw, with username Admin and a
blank password. In this case, which is more likely than the above case I
guessing, your copy of System.mdw may have somehow gotten corrupted. Try
searching your hard drive for this file. For example, my copy is in this
folder:
C:\Documents and Settings\Administrator\Application Data\Microsoft\Access
(Yes, I log on as Administrator on my PC routinely. Bad Tom).
Rename your copy of System.mdw to something else. Then try restarting
Access. Access 2003 will automatically create this file, if you are
permanently joined to System.mdw, and it does not find it during startup.
That should get you a fresh copy.
Good Luck,
Tom Wickerath
Microsoft Access MVP

Cannot open the message catalog "man" for locale "es_ES.UTF-8"

Hi,
When using the command line and I type a command (for example "man ls") I get the following message:
Cannot open the message catalog "man" for locale "es_ES.UTF-8"
(NLSPATH="<none>")
Then I get man pages in English instead of my language.
Could you please help?
Many thanks!

I post this just in case someone has the same problem. Finally I was digging into /usr/sare/man and I found that apple just includes translations in man for English, French, Italian, Russian and Polish as you can see in the following listing of files:
fr it.UTF-8 man5 mann ru.UTF-8
fr.ISO8859-1 man1 man6 pl whatis
fr.UTF-8 man2 man7 pl.ISO8859-2
it man3 man8 pl.UTF-8
it.ISO8859-1 man4 man9 ru.KOI8-R
I don't know if it is possible to download the spanish translation from somewhere. If someone knows please let me know.
Hope this helps to someone in the future.
Cheers

What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

KDE, HAL, cannot open the non-latin mount point

Similar Messages

Maybe you are looking for