KDE networkmanagement couldn't select the ad-hoc Connection?

Hello.
I use kdeplasma-applets-networkmanagement to manage network, but can't select the ad-hoc connection, it's not in the Connections list.
If I type in 'hidden network' the ad-hoc connection name, it will show create new connection, not connecting.
applets-networkmanagement  do not support ad-hoc connection?

Here some of my settings in my hp Laptop (I have non-english Vista so I'm trying to translate):
In the status page I read:
IPv4 Connectivity....................Local
IPv6 Connectivity....................Limited
Media state.............................Enabled
SSID.......................................hpsetup
In the details subpage of the status page I read:
Intel wireless 5100
Enable DHCP..................YES 
IPv4 adress ....................169.254.111.28
IPv4 mask subnet.............255.255.0.0
Netbios tcpip enabled......YES
I have my J6410 reset to the deafult settings.
Any HELP will be appriciated, I can't run my practice here....

Similar Messages

  • HT5137 How can I get my castleville legends to connect to facebook?  I select the option to connect, it goes to facebook and back to the app, but it still won't connect.  I have both restarted the app and my phone wiht no luck.

    How can I get my castleville legends to connect to facebook?  I select the option to connect, it goes to facebook and back to the app, but it still won't connect.  I have both restarted the app and my phone wiht no luck.

    Hello sdrail81,
    The following article provides tips that can help resolve most issues with apps from the App Store.
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Cheers,
    Allen

  • Entity Framework -  unable to select the oracle data connection

    Entity Framework - unable to select the oracle data connection from the wizard that allows you to select the data provider. Even though we successfully added a data connection that points to an oracle database, we still can't select an existing data connection or create a new database provider that points to an oracle instance.
    we are using both vs 2008 sp1 and vs 2010. We connect to oracle 11g and we use the latest oracle odp.net driver. the Driver is installed and working in vs studio.

    I had this exact problem when I started. I think I had downloaded the wrong odbc (the 64x version). When I unloaded that version and downloaded the 32bit version it worked.
    Hope that helps. ~ Darla

  • TS1398 My iphone5 ios6 goes on 3g although there is a wifi network available! When i go into settings, and select the network, it connects again! Is it software? Or hardware?

    My iphone5 ios6 goes on 3g although there is a wifi network available! When i go into settings, and select the network, it connects again! Is it software? Or hardware?

    this was happening with my phone the other night. i just went into the phone to settings > general > reset > reset all settings
    You can also try rebooting the router

  • How do I get my Macbook Pro to automatically select the location when connecting to the wireless network?

    Each time when I want to connect to a different network I have to manually select the location and it's becoming very annoying. How do I get it to automatically select the location?

    Check the following settings on your MacBook
    Open System Preferences (gear icon on the dock)
    Open Network
    Click on AirPort on the left
    Click Advanced at the lower right
    If you have a "favorite" network, make sure it is first in the connection list. If it's not, drag it there
    Make sure that there is a check mark next to "Remember networks this computer has joined"
    No other boxes should be checked
    Click OK, then click Apply

  • Couldn't Select File to Restore in Time Machine

    Yesterday after running some experiments on an unrelated issue, I realized that a file on the Desktop I had been using in the experiment was gone.  (I'd evidently moved it to the test folders instead of copying it with option-drag.)  As that Mac was being backed up with Time Machine to a Time Capsule, I launched Time Machine, waited for the "Star Wars" display for the Desktop to appear, and navigated to a backup several hours before.  I could see the file I wanted to restore, but even though I waited a number of minutes, but the Time Machine Finder window never "went live" (as opposed to grayed-out).  As a result, I couldn't select the file I wanted to restore.  Can anyone explain what would cause this?  This all took place within the same OS X user, if that could have been an issue.
    I finally gave up, used the Finder to open the mounted Time Machine "sparsebundle", opened a backup folder from several hours before, navigated to the user's Desktop, and used the Finder to copy the file back to the Desktop.

    Yeah, I see that too on occasion, especially over a network.
    I've asked Apple (several times) to put up a progress bar or wheel, or some indication that propagating the display is in process, but of course to no avail (along with ANY suggestions to add a Help button or any other explanation there, and Lion will be even worse for laptop users).
    It does seem that TM keeps the status of the last display cached somewhere; when you select something different from the last time, you see the old timeline for a moment or two, then it starts re-propagating. 
    Other than the things in #E4, all I can suggest is patience; if it really seems frozen, cancel out and try again.

  • The selected printer connection method is incorrect. Select the....... ERRO

    Just upgraded to 10.5. I'm setting up a few printers and a plate maker. Got everything setup as far as I could tell but one machine wont work. It's an ImageRunner 8500 from Canon. When I try to print to that printer I get this:
    The selected printer connection method is incorrect. Select the correct printer connection method in printer list, and then try to add the printer again.
    Not what thats about. In the printer list, It shows up there with everything else that is connected via Appletalk. I got the PPD for the Konika Minolta CPP500 installed and it prints fine... any ideas? Thanks,
    Chris

    Hi John
    I tried Appletalk but that printer does not appear. However LPD does work. I think the problem was on checking my other Macs in the office, there is no way of telling whether they are connect via IPP or LPD as the set up appears the same, i.e. IP address. When I tried to add my the printer again, I had forgotten how we set it up originally.
    Many thanks for pointing me in the right direction.

  • Cannot select the connection type on the Nokia PC ...

    Operating System: MS Windows 7 (x64) Home Basic Service Pack 1
    Mobile Phone:        Nokia 5130 Xpress Music Edition (V.10.10) and Nokia E66
    Connection type:   USB Cable (CA-101) with Nokia PC Suite 7.1
    Problem:    I cannot select the connection type on the Nokia PC Suite after running the programme and connecting them 
    Description: It was connected only one device, and it found that I cannot select the type of connection; however, I can run well on the Mass Storage of the both devices. Now, I guess that the problem is capability of MS Windows in Home Basic Edition because Ovi Suite cannot work on the version (Nokia's website shows on the systematic requirement)
    Thank you
    Solved!
    Go to Solution.

    Operating System: MS Windows 7 (x64) Home Premium
    Mobile Phone:        Nokia 5230
    Connection type:   USB Cable with Nokia PC Suite 7.1.60
    Problem with the Nokia Connectivity Manager - no connections are listed and the reinstall error goes away after running repair for the Nokia Connectivity Cable Driver.  Have tried the
    PC Suite Cleaner
    CC Cleaner
    many PC Suite reinstallations after disabling anti-virus
    On some installations, I would get an error "Service cannot be started" but when I cancel and restart the installation it goes straight through - I always end up with a blank window in the Connection Manager.  Looked for some other issues found in older forums addressing older versions, nothing has worked yet.  More help, please.

  • Ad Hoc Connection with Windows Vista

    Ok I know that this question has been asked many times over, however I am having trouble finding anything that is similar to my setup. So here we go. I have a laptop that is connected directly to the internet. I am trying to get my iTouch connected to the internet through the ad hoc connection that I have setup. I was able to get it connected for a short amount of time once, but haven't been able to get it connected since. I am not too savy to this whole networking so that is why I am here. Most of the threads I have read are a hard to understand for me. If anyone can help me out I would be greatly appreciated.
    16 GB iTouch
    Toshiba Satellite
    Windows Vista

    I assume that you want to use your Windows computer as the network source for the iPad to join so read this.
    http://unlockforus.blogspot.com/2008/10/vistaxp-how-to-set-up-ad-hoc-wifi.html

  • Problems connecting iPod touch to windows vista ad-hoc connection

    Hi,
    This problem has been troubling me since i got my iPod Touch(2nd Gen)
    I do not have a wi-fi router,rather i make a ad-hoc connection on my laptop(vista) and share the internet with this wireless ad-hoc connection. I then turn on the wifi on my ipod, which obidiently detects the ad-hoc connection, and after entering the password(WEP) connects to the network(i even get that signal bar indicator on the ipod). But when i try to open a website,it says "Safari cannot open the webpage as it is not connected to the internet". This is really frustrating. I've searched like a zillion places but not able to find the solution to the problem.
    All the setting are automatic(DHCP) which includes my wired internet, my wireless network and my ipod settings.
    Plz help guyz.
    Thanks,
    Aditya

    Hi,
    I had the same problem, my Ipod Tough 2generation, the newest version.
    When I ried to use ad-hoc connection, Ipod tough reciever Ip-adress and the "aliverkon peite"(in finnish, dont know the english one) is 255.255.0.0 but not dsn and default gateway.
    sorry my bad english

  • I have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

    I  have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The MAS should use any credits first and then apply the remainder to a listed bank card.

  • I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."

    I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."  I have never had this happen before?  Thanks!

    Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #1, Repair Permissions.
    OT

  • Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.

    Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
    However, when I print from Safari or another program, I have no problems
    == Yesterday

    The only solution to corrupted files is to restore from your back up.
    Regards
    TD

  • How to share internet connection with KDE networkmanager applet

    I mainly use wireless around my house and like to use one computer to share it's wireless to another when installing Arch, until I can get KDE and networkmanager installed so I can easily connect to the wireless. I've always been able to easily share internet connections with Ubuntu, but when I try it with Arch, with Gnome OR KDE (and their respective applets), It just doesn't work.
    Is there some library or backend I need to install to make ICS work?
    Thanks!
    Last edited by MetaMan (2011-09-10 22:12:26)

    If this helps at all, here is what I am currently trying: I open up the network settings KDE Control Module, select "Wired", select the device (eth0) and click edit, and under the "IPv4 Address" tab  selecting "Shared" from the "Method" drop-down.
    Also, to make it clearer, I am trying to share wlan0(on device 1) through eth0 to eth0 on device 2. Also, device 2 is running the Arch setup and I am telling it to connect to eth0 via DHCP after I select the remote mirror to use. I have managed to do this before when device 1 ran Ubuntu.
    I've searched Google, the forums, read the wiki pages for KDE and networkmanager, and can't seem to find a mention of internet connection sharing (pertaining to my usage case; the forums have some posts of people trying to use their computer to broadcast eth0, I'm trying to do the opposite) anywhere on them. In fact, I'll gladly write the section myself if I figure this problem out.
    Hope this extra information helps!

  • KDE networkmanager and sharing mobile internet connection to wlan

    I'm not so expert in networking only a user.
    I use KDE 4.6.1. I have a netbook with Atheros AR5001 Wireless Network Adapter driver ath5k. I have installed networkmanagement 20110226-1 and networkmanager 0.8.2-3.
    I connect to the internet with a mobile broadband connection CDMA/EDVO that is well recognized and connect well.
    I used to share the connection with other notebook.
    But I can't create an ad-hoc shared connection.
    After installing dnsmasq and follow the instruction finded here: https://wiki.archlinux.org/index.php/Sh … _interface
    Configure dnsmasq. Make the following changes to /etc/dnsmasq.conf (uncomment if necessary):
    domain-needed
    bogus-priv
    interface=wlan0
    dhcp-range=10.42.43.1,10.42.43.100,12h
    Start dnsmasq as root:
    /etc/rc.d/dnsmasq start
    Finally, set firewall to forward connections to and from the Internet for clients connecting to your wlan. This is done by issuing (you guessed it right, as root again):
    iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
    Now it reply this error from the log
    Mar 14 07:09:05 netbook-pc NetworkManager[2084]: <error> [1300082945.419707] [nm-device-wifi.c:1544] nm_device_wifi_set_mode(): (wlan0): error setting mode 2
    The NetworkManager enter in a loop of trying to connect.
    Can anyone help me?

    According to that blogpost (mentioned in above post - http://lamarque-lvs.blogspot.com/2011/0 … ging.html), the bug has been solved and:
    Plasma NM does not follow KDE SC release schedule. I tested this code yesterday with KDE 4.4.4 and it worked. It is just a matter of distributions updating their packages with this code.
    And from https://bugs.launchpad.net/ubuntu/+sour … bug/725041 (same bug, reported for network-manager package in Ubuntu):
    This bug was fixed in the package network-manager - 0.8.4~git.20110228t143901.5cdded6-0ubuntu1
    Archlinux currently uses networkmanager 0.8.3-0.20110113, any chances of anyone including these updates anytime soon?

Maybe you are looking for

  • Variable in Report

    Hi, I've creted one report with Variable, The variable has created with Characteristic value with Selection option. While executing query it asks 1. Selction for [] , = , < , > , <= , >= 2. Selection value list 3. selection value list 4. Include or E

  • Sportsflow code doesn't work AFL Live Pass

    Hi, I received a code from samsungs sportflow app for 2 months free AFL Live Pass, the code does not seem to work though.I ended up accidently paying for a week instead which I have cancelled. It said the code was already redeemed.

  • [SOLVED] Strange issue with dhcpcd

    Alright, so today when I booted up, I tried to connect to my campus' wireless network using Wicd, but it timed out every time it attempted to obtain an IP. So I ran through my usual steps to get wireless up in the console (ifconfig -> iwconfig -> dhc

  • Payment Advice information

    Hi experts i am trying to print payment advice(Using Script) .its working fine but its not pulling the data.please help me .this is the code i am using .i want to use hardcode but they got different names. <S>Our accounting clerk</> &FSABE-SALUT' '&&

  • Lost my loyalty discount

    My wife and I "edged up" today and I just looked at our new bill. Last year we were given 8 gigs of data for the same price we were paying for 4 originally. We always came close to going over, so I appreciated the extra data. Now that we upgraded, pl