KDE SC 4.4 installation how-tos :)

Hi,
It looks reasonable to put similar problems into one thread (IMHO, at least ).
My particular problem is this:
$ sudo pacman -Sy --asdeps qt
$ sudo pacman -Su
:: Starting full system upgrade...
:: Replace kdelibs-experimental with extra/kdelibs? [Y/n] y
resolving dependencies...
warning: provider package was selected (phonon-gstreamer provides phonon-backend)
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: kde-meta-kdepim: requires kdepim-akonadiconsole
$
The same result with mirrors.kernel. Any ideas?

axel668 wrote:pacman -Rc qt
pacman -Syu
pacman -S kde
This one worked only too well, just as it should . Among other things I got some plasmoids from AUR killed, naturally enough, as they depend on qt. Now I can't get rid of their ghosts on my desktop. They aren't present in the 'Add Widget' dialog and they don't have working close buttons. How am I supposed to get rid of them?
UPD:
After a couple of reboots the offending plasmoids somehow got lost
Last edited by Llama (2010-02-10 15:29:24)

Similar Messages

Getting error message for "user created how tos" CS3

I tried to create some new How Tos in CS3 and recieved the following error message when I try to open it:
"The Adobe Help application could not load a URL because the specified file could not be found. You may need to re-install the application and the help component."
If I access one of the ones created with CS2 it opens (I dragged them over from CS2, I have since removed CS2 from this computer, it's still on my laptop) I haven't tried creating them and importing them to this computer).
I'm using Microsoft Office Word 2003 to save the How Tos as html files, and notepad to edit Add_001.howto file.
Since I gotten this error, I reloaded CS3 Design Standard, it didn't fix the problem. Also I have ensured that the Add_001.howto file points to the right location (C:\Program Files\Adobe\Adobe Photoshop CS3\Help\additional how to content)and is in the right format:
"John Shaws CS3" "47. A GLOSSARY OF IMAGING TERMS" 47.html (works).
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html (doesn't work)
The only thing new on the computer is a brand spanking new EVGA NVidia Geforce 9500GT PCI express(512 mb ddr2 dual DVI output) with the latest drivers. It replaced NVidia GeForce 6600GS and Matrox Millenium video cards (the Matrox). The new video card does not include some program that allows it to run MS-DOS programs, but I don't feel that is causing the problem.
System Info:
Photoshop CS3 10.0.1
Computer: Gateway DX310X with Gateway FPD1975W and FPD1730 monitors
Windows XP Media Center Edition, Service Pack 3
Intel Pentium D proccessor
1GB internal memory
168GB of free space on hard drive.
I hope I have given you suffiecient information to give me some possible solutions.
Thanks
Rick

Mylenium
Thanks for the assist.
It isn't a Windows Indexing Service problem.
It is an operator problem. As you pointed out the long name and spacing are the issue here.
I changed the the Add_001.howto file from:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html
to:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" NN001.html
I changed the file in the Additional How To Content folder, to match.
And it works now.
Now that I know what was wrong with my file names, I'll be able to get the various plugin help files/documents into Photoshop so I won't have to get out of it to get help on them.
Thanks
Rick

Version 2.0 How Tos?

Hello,
I'm looking for the How To examples for Version 2.0. Specifically the How to Upload and Download Files in an Application. I found the How To for version 3.0, but I'm having difficulty finding the How To for the version 2.0.
Can anyone direct me to this How To?
Thanks,
Joe

http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/up_dn_files.htm#CJAHDJDA
FYI: Here is a link to the ApEx (HTML DB) How-To's. http://www.oracle.com/technology/products/database/application_express/html/doc.html
Click on the "Older How-tos" link to the the older information.
Mike

How tos - Multi Struts Config for ADF UIX (JDev10.1.2)

Has anyone tried the OTN How-tos for Multi Struts Config?
http://www.oracle.com/technology/products/jdev/howtos/10g/StrutsMultiConfigs/struts_multiconfig_howto.html
Well I tried doing it and am facing a lot of problems.
1. When I try to create a page in the child, it creates a duplicate page and hence two UIModels are created.
2. Also there is an extra directory created in the common public_html folder as child1/child1.
Could some one work that link out. I have failed to figure out what's going wrong.
My problem doesn't end there. The link tells us that we can create multi struts app, but how do we link the pages created in these applications together?
Regards,
Vineet

Goran,
a smarter way would be to use Virtual Private
Databases if the database is Oracle. This way you
don't have to bother within your application to do
this. We do have a VPD example in teh howtos for
JDeveloper 9i.Tnx for the suggestion, but I needed a solution within ADF.
If you want to do this on teh middle tier, use a bind
variable in the BC query and populate this through an
exposed method on the AM. I found even simpler solution... I let user choose an employee and fix this employee's id with a setCurrentRowWithKeyValue operation (drag-n-drop to a Data Action). Afterwards all the screens based on child view objects in the Data Control Palette hierarchy display only data from a fixed employee.

My IT dept. blocked in Apple Installer, how do I get around it?

My IT dept. blocked in Apple Installer, how do I get around it?

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
lmerchant wrote:
My new phone has an old apple ID associated with iCloud only. I cannot delete the account as it has "Find my iPhone" turned on.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

HT1926 My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi after 2 installs how can I install such a file do you have a path for this

My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi after 2 installs how can I install such a file do you have a path for this

Hi kensb!
I would recommend that you attempt to reinstall all of the programs and components of iTunes on your machine and reinstall everything again. It can be tricky to get everything uninstalled, so we have an article that can help you make sure you uninstall everything:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Specifically, when it comes to uninstalling, you will want to uninstall applications in this order:
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer.
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended effects.
You will then want to follow the links in those articles to download the latest package of iTunes software for your computer and install again from there. Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

Installation: how do I install adobe digital editions on my pc?

Installation: how do I install adobe digital editions on my PC?

Can't install Adobe Digital Editions 4.0
Install Digital Editions 4.0 | Windows 7, Vista, XP

Fan runs all the time after OS X Mavericks installation, how do I turn fan off?

Fan runs all the time after OS X Mavericks installation, how do I turn fan off?

Rest the SMC, do it 2-3 times. Please click Intel iMac SMC and PRAM resets for instructions.

[solved] KDE 4.2 Persistent Icons: How to remove permanently?

I'm having problems in 4.2 with getting rid of icons on the desktop and the taskbar. These are both from my previous 4.1 installation and also some I have deleted from 4.2 itself.
The desktop icons are/were links to applications created in the desktop folder and then dragged across onto the desktop itself. If I delete these, then next time I log on they appear as "type unknown" icons (white background with some binary numbers). I can get rid of these by deleting some config files in .kde4/share/config as detailed in post http://bbs.archlinux.org/viewtopic.php?id=64166. This also removes other changes I've made to the desktop such as wallpaper. Anybody got an alternative way of sorting this?
The taskbar redundant icons are a little more persistent, and I haven't found a way yet of removing these permanently. Any offers please?
Edit: KDEmod 4.2
Last edited by chsims1 (2009-02-23 07:12:54)

Some people have reported this at bugs.kde.org: http://bugs.kde.org/show_bug.cgi?id=183635.
This are probably special cases as there were only two or three reports + yours
I'm not really sure how to help in this case. Sorry.
Last edited by darzephyr (2009-02-23 02:21:50)

KDE 4.1 and installation questions.

Hi,
I want to move up to Arch from Mint and PCLOS but the installation routine has me a little apprehensive. I always read reviews of Arch Linux and sometimes the reviewers give the impression that the installation is not for newbies. I am not a newbie anymore but I don't have a lot of time to tinker or learn - just the facts.
So, Is the installation process challenging for the averagely intelligent person with some Linux experience with the easier distros like Mint and PCLOS ? Also, how is KDE 4.1 working out on Arch ? I would definitely like to try it if it is up to snuff now. I read that 4.0 release was pretty bad.
Thanks,
B.

The documentation for installing Arch is pretty good. I found that I did have to hunt around a bit at times to get everything set up, but it is all there if you look. You can be up and running quite quickly if you know what you're doing. If you don't, you might be in for a long afternoon.
The main difference between an Arch installation and say, PCLOS, is that with PCLOS, the install is always going to end up with a KDE desktop, KDM, sound, etc, so they can automate most of the process for you. Arch is completely ala carte, so to get a KDE workstation, you have to do the base install, add a user and configure them, install X, add support for your graphics card, configure support for sound, install HAL, install KDE, install KDE applications, set up and configure networking, and then install KDM (and I'm sure I'm leaving some stuff out).
Again, there is documentation for doing all of the above, BUT if you haven't done it before and you do things out of order, or can't figure out one of the steps, you can get stuck for a very long time.
What was your reason for wanting to ditch PCLOS in the first place? Just something different or did you have something in mind?
Chris
brjoon1021 wrote:
Hi,
I want to move up to Arch from Mint and PCLOS but the installation routine has me a little apprehensive. I always read reviews of Arch Linux and sometimes the reviewers give the impression that the installation is not for newbies. I am not a newbie anymore but I don't have a lot of time to tinker or learn - just the facts.
So, Is the installation process challenging for the averagely intelligent person with some Linux experience with the easier distros like Mint and PCLOS ? Also, how is KDE 4.1 working out on Arch ? I would definitely like to try it if it is up to snuff now. I read that 4.0 release was pretty bad.
Last edited by iggyst00ge (2008-08-01 17:45:42)

Install latest KDE 4.4 version? How?

How do I install KDE 4.4? I really want to try it.
I have KDEmod now, 4.3.
Would I need to remove it after I install KDE 4.4?

Primoz wrote:
Skripka wrote:
funkyou wrote:Just to clarify: thats wrong We almost never build against testing, even KDEmod-testing is compiled against Arch core/extra.
Qt4.6 ain't in Extra, or are y'all KDEMod folks back to supplying your own Qt? I thought at one point y'all used Qt from Extra.
Thx for correcting my misunderstanding
Now there's a qtmod package... That replaces Qt.
Yes, its there since 4.3.0 already
People, sometimes i am asking myself how some of you survived the Arch installation. Reading documentation, news etc is still essential, even when using Chakra/KDEmod

HD installation, how does this work with installing software?

Something I was missing, is an explanation about ho wto get the new harddrive working. Maybe it is really very simple, but;
If you insert a new unformatted harddrive, how can you start up the Mac and insert the CD with the operating system? Surely, if the harddrive isn't formatted, the Mac wn't start up, and if it doesn't start up, surely you cannot insert the CD with the operating software?
Are there any other activities I need to do to install the harddrive? e.g. format it using an external bay, or something like that?
Also, what type of harddrive should I go for? Standard IDE HDD? How about SATA or SATAII, will that work with this iMac (G5, 1.8GHz, 20", non-iSight)?

Yes, you could use it. The owner of a copy under a Single User licence (the norm) can install one copy of the OS on one machine. It is implied therefore that the seller has uninstalled any previous installation. This is the seller's concern not yours.
However I would be wary about buying the latest Mac OS X 10.5 from ebay, when this product is still available new from an AppleStore. The trap could be on ebay that they are selling machine specific disks, known by their grey colour, which are not the Retail versions and most likely will not install on your computer.
In short, if you want a Leopard disk buy it new from Apple and avoid that potential hazard.

I want 2 separate itunes installations - how to do it?

I want to have a 2nd complete itunes with all my music on an external drive as backup or to take to another computer but when I try to run itunes setup on the external drive it just wants to repair or replace the itunes on my boot drive - how do I make it make me a 2nd itunes on the external drive. I REALLY do not want to mess up the original itunes as there is too much music in to get it all organized again.
JOhn

You cannot install two iTunes programs as you describe. Very few programs nowadays allow one to perform what you want.
There is another way to get what you want. It may be a bit involved to set up, but will work. Managing the syncing between the two 'Libraries' will take some diligence on your part.
Here's what I would do. With a complete and functioning iTunes Library, music files and metadata:
- Close iTunes
- Make a copy of both the Library database file located in the 'My Music\iTunes' folder
- Store the files in a safe folder
- Attach the ExHD to the PC making sure it is a drive letter well down the alphabet ('M', 'N' or 'O') - formally change this if not
- Open iTunes
- Perform a 'move' of your Library to the ExHD as described in this post: http://discussions.apple.com/click.jspa?searchID=-1&messageID=1836529
- Do not delete the original music files on the Root Drive
- Close iTunes
- Make a copy of both the Library database file located in the 'My Music\iTunes' folder - label them so you know they are from the ExHD
- Store the ExHD Library files on the ExHD
- Swap the original Library files with the current ones
- Open iTunes - your original Root Drive Library will be back
What you have just done is to store the music files and Library database files on the ExHD. You can attach the ExHD to any other PC with iTunes installed (Keep a copy of the iTunes Installer files on the ExHD so you can install it easily).
As long as the ExHD is attached to any PC as the same drive as you did initially, you can copy those Library files to the iTunes folder, open iTunes and have a replica of your music, Playlists and metadata.
Of course, changes made to the main iTunes music file will not be reflected in the ExHD file unless you sync the changed music files and the Library databases. It’s a bit more involved, but as a start -- there it is.

Oracle 11g Installation How to select Database Character Set

Hi,
I am Installing oracle 11g R2. After installation I had verified the character set it was AL16UTF16 but I wants to set AL32UTF8 charater set at the time of oracle installation only. I can't see the character set setting opetion at the time of installation because I am selecting the installation option " Install database softerware only" and after installation of oracle software manually I am creating the database. Please help me how can I set the character set at the time of oracle installation or at the time of database creation.
My question is-
How can I set the AL32UTF8 character set in above scenario?
Why It is showing AL16UTF16 character set even I did not define any thing?

But is there any choice to set the NLS_CHARACTERSET at the time of manually database creation. Actually For creating the database i am using one shell script for seting the parameter values in init.ora file so can I set the parameter at that level(at the time of creating init.ora using manually database creation). like
## Original init.ora file created by manual database creation tool on ${DATE}.
*.aq_tm_processes=0
*.background_dump_dest='$ORACLE_BASE/admin/$ORACLE_SID/bdump'
*.compatible='10.2.0'
*.control_files='/$db_file_loc/oradata/$ORACLE_SID/control01.ctl','/$db_file_loc/oradata/$ORACLE_SID/control02.ctl','/$db_file_loc/oradata/$ORACLE_SID/control03.ctl'
*.core_dump_dest='$ORACLE_BASE/admin/$ORACLE_SID/cdump'
*.db_block_size=8192
*.db_cache_size=104857600
*.db_domain='$server_name'
*.db_file_multiblock_read_count=8
*.db_name='$ORACLE_SID'
*.fast_start_mttr_target=300
*.instance_name='$ORACLE_SID'
*.java_pool_size=16777216
*.job_queue_processes=4
*.large_pool_size=16777216
*.log_archive_dest='/u05/oradata/$ORACLE_SID'
*.log_archive_format='$ORACLE_SID_%s_%t_%r.arc'
*.olap_page_pool_size=4194304
*.open_cursors=500
*.optimizer_index_cost_adj=50
*.pga_aggregate_target=536870912
*.processes=1500
*.query_rewrite_enabled='TRUE'
*.remote_login_passwordfile='EXCLUSIVE'
*.shared_pool_size=83886080
*.sort_area_size=1048576
*.sga_max_size=1048576000
*.sga_target=536870912
*.star_transformation_enabled='TRUE'
*.timed_statistics=TRUE
*.undo_management='AUTO'
*.undo_retention=10800
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='$ORACLE_BASE/admin/$ORACLE_SID/udump'
*.utl_file_dir='/export/home/oracle/utlfiles'
**.nls_characterset='AL32UTF8'*
EOF
Is it correct?

KDE SC 4.4 installation how-tos :)

Similar Messages

Maybe you are looking for