KDE: Show FPS desktop effect
Hi,
The effect looks entirely like a bad bug: it just makes an ugly running blotch it a corner of the screen which overloads CPU and makes the desktop generally unusable. I wonder if I'm missing something, as the effect persists through I can't remember how many KDE releases.
On the other hand, people keep on reporting KDE performance in terms of FPS. What's the right way to check FPS?
mesa package contains glxgears utility
$ glxgears
pipes into console some moderately useful output, notably FPS every 5 seconds. Better than nothing, granted. Is it the best way to check my DE performance?
Similar Messages
-
[SOLVED] Just installed KDE 4.6, desktop effects don't work.
When I try to enable KDE's desktop effects the screen goes haywire and everything is black with nasty distorted lines. Then everything returns after a little while and KDE shows a popup notification saying that "desktop effects were too slow and have been suspended...".
I'm pretty sure my xorg.conf is configured perfectly, I've read everything there is to know about that. I was previously on Gnome with Compiz working flawlessly, so I have a feeling its not a video problem. There's always a small chance I could be wrong though.
Could it be a video driver problem? If so, what should I do about that?
Any idea what might be wrong?
Last edited by amadar (2011-04-24 23:25:03)I'm using xf86-video-ati with my ATI card.
I initially tried Gnome, but for some reason, gnome-shell just wouldn't start, so that why I ended up trying KDE. Once in KDE, i had this described problem.I couldn't fix it, and it was crashing (100% CPU usage sometimes), so I switched back to Gnome 3 to attempt to get the shell running. Finally, I figured out that you must not add "nomodeset" to the kernel boot line in order for gnome-shell to work, so I removed that from the end of my line and gnome-shell worked!
It might be possible that this is the solution for the KDE graphic problem as well... I'm testing it right now, i'll be back to post it after the restart...
Last edited by amadar (2011-04-24 23:03:03) -
[Solved - KDE 4.6] No desktop effects, but still have 3D render
I have an nvidia graphics card, with the nvidia binary driver installed, and everything worked smoothly, until I updated to Kde4.6 just now. After a few seconds where everything looked normal (desktop effects enabled just as before), the screen went beserk, and a popup informed me that the desktop effects were too slow, and thus have been deactivated. Without those effects, everything works fine. If I try to re-enable them in System Settings, it now tells it can't, it will revert to previous configuration, and should try to see what's wrong with my Xorg settings. I don't think there's anything wrong with them, but still, here is what I think is the relevant part:
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9500 GT"
Option "RenderAccel" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
#Option "metamodes" "CRT: nvidia-auto-select +1280+0, DFP: nvidia-auto-select +0+0"
Option "MetaModes" "DFP: 1280x1024 +0+0,CRT: 1280x1024 +1280+0;DFP: 1280x1024,CRT: NULL;DFP: NULL,CRT: 1280x1024"
SubSection "Display"
Depth 24
EndSubSection
Help, ideas, anyone?
Thanks in advance.
EDIT: I restarted X, and then was able to enable desktop effects again, and so I did. And I just discovered how to trigger the "beserkness": just press Alt-Tab repeatedly. I will show a transparent preview of the window, and then all of a sudden, it freezes for a moment, then comes back, but way way slow...
Last edited by gauthma (2011-01-29 00:07:59)I've been able to narrow it down even further: it appears that the crash happens when the effect for window switching is box switch. I changed it to Cover Switch, and everything is working properly. I haven't tried any others, for obvious reasons, but should anyone else have the same problem, here's a hint to a possible solution. Anyway, I'm closing this, and probably submit a bug to the KDE folks...
-
[Solved] KDE Desktop Effects no longer working
Hello,
I just did an update, (I didn't think it was a major one, I don't recall seeing graphics update, though I'm not sure how to confirm - is there a way to see recently updated packages in yaourt?) and after a brief issue with powertop that was solved by a restart (https://bbs.archlinux.org/viewtopic.php?id=179789 - it may be unrelated though) I found that when I restarted, KWin Crashed, and since then, my desktop effects are not working.
I have gone to the KDE Desktop Effects Settings Menu, and under the advanced menu, set the compositing type back to OpenGL 3.1, clicked apply, and confirmed that I wanted to try it even though it had evidently crashed Kwin. I then received a message stating "21 desktop effects could not be loaded". When I clicked details, a popup window said:
"For technical reasons it is not possible to determine all possible error causes.
Desktop effect system is not running."
For the record, I am on a Thinkpad X201 with intel graphics.
Any ideas?
Last edited by TheGuyWithTheFace (2014-04-19 07:35:43)Some Extra information:
I just tried a restart, that didn't work.
I then went back into effect settings, and saw that "enable effects at startup" was not checked. I also saw that under the advanced settings, Qt Graphics system was set to raster. Since I'm not sure which it was supposed to be on originally, but the current configuration wasn't working, I also set that to Native, and then clicked apply. KWin then crashed, here is the output:
Application: KWin (kwin), signal: Aborted
Using host libthread_db library "/usr/lib/libthread_db.so.1".
To enable execution of this file add
add-auto-load-safe-path /usr/lib/libstdc++.so.6.0.19-gdb.py
line to your configuration file "/home/perry/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/perry/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
[Current thread is 1 (Thread 0x7fafaa788800 (LWP 796))]
Thread 4 (Thread 0x7faf8beb3700 (LWP 797)):
#0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
#1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
#2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 3 (Thread 0x7faf8b27a700 (LWP 798)):
#0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
#1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
#2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 2 (Thread 0x7faf8a878700 (LWP 799)):
#0 0x00007fafa9fa2fd3 in select () from /usr/lib/libc.so.6
#1 0x00007fafa42e6c13 in ?? () from /usr/lib/libQtCore.so.4
#2 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#4 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 1 (Thread 0x7fafaa788800 (LWP 796)):
[KCrash Handler]
#5 0x00007fafa9ef9389 in raise () from /usr/lib/libc.so.6
#6 0x00007fafa9efa788 in abort () from /usr/lib/libc.so.6
#7 0x00007fafa9ef24a6 in __assert_fail_base () from /usr/lib/libc.so.6
#8 0x00007fafa9ef2552 in __assert_fail () from /usr/lib/libc.so.6
#9 0x00007fafa7d6f8d9 in ?? () from /usr/lib/libX11.so.6
#10 0x00007fafa7d6f96e in ?? () from /usr/lib/libX11.so.6
#11 0x00007fafa7d6fc4d in _XEventsQueued () from /usr/lib/libX11.so.6
#12 0x00007fafa7d72905 in _XGetRequest () from /usr/lib/libX11.so.6
#13 0x00007fafa4dfe587 in ?? () from /usr/lib/libGL.so.1
#14 0x00007fafa4dfbf6b in ?? () from /usr/lib/libGL.so.1
#15 0x00007faf89bef6db in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#16 0x00007faf89befa33 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#17 0x00007faf89befb8b in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#18 0x00007faf89b89ef6 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#19 0x00007fafa4dfd898 in ?? () from /usr/lib/libGL.so.1
#20 0x00007fafa4dd804c in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1
#21 0x00007fafaa34e479 in ?? () from /usr/lib/libkdeinit4_kwin.so
#22 0x00007fafaa350029 in ?? () from /usr/lib/libkdeinit4_kwin.so
#23 0x00007fafaa34aefc in ?? () from /usr/lib/libkdeinit4_kwin.so
#24 0x00007fafaa32f4b5 in ?? () from /usr/lib/libkdeinit4_kwin.so
#25 0x00007fafaa2b6c75 in ?? () from /usr/lib/libkdeinit4_kwin.so
#26 0x00007fafa431d6ea in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
#27 0x00007fafa41fa958 in QFutureWatcherBase::event(QEvent*) () from /usr/lib/libQtCore.so.4
#28 0x00007fafa3491f0c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
#29 0x00007fafa34984d0 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
#30 0x00007fafa8bfa88a in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5
#31 0x00007fafa4309a6d in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4
#32 0x00007fafa430caad in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4
#33 0x00007fafa352f71c in ?? () from /usr/lib/libQtGui.so.4
#34 0x00007fafa43086cf in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#35 0x00007fafa43089c5 in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#36 0x00007fafa430dae9 in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4
#37 0x00007fafaa2e7896 in kdemain () from /usr/lib/libkdeinit4_kwin.so
#38 0x00007fafa9ee5b05 in __libc_start_main () from /usr/lib/libc.so.6
#39 0x00000000004006fe in _start () -
XBMC/mplayer and KDE Desktop effects
Hi,
i have setup a arch based HTPC with XBMC on top of KDE, but there is one thing i were not able to resolve: The XBMC GUI and playing a video on it gets laggy as soon as i DISABLE the kde desktop effects. My system is i3/sandy bridge based with integrated intel graphics, vaapi installed.
1. tried different playback settings within XBMC, same results
2. as soon as i disable the kde desktop effects, xbmc becomes slow and laggy, even if i dont restart it, if i enable desktop effects its smooth again
3. mplayer reacts the same way when used with -vo gl or -vo gl2, so it could be somehow opengl related. With -vo xv it runs smooth in both configurations.
4. Cpu load is constantly <20%
5. tried as root user, same results
6. glxinfo reports direct rendering is enabled
so any ideas how to resolve that problem? or how to find out whats going on?
you may ask why i want to disable desktop effects, well with desktop effects on, videos run almost perfect, but sometimes there are smaller lags that, i guess, can be related to the desktop effects eating resources, so i want to try without them.
here is the custom part of my xorg config, tearfree was needet to get a vsync-enabled video playback:
#20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
#Option "AccelMethod" "uxa"
#Option "AccelMethod" "xaa"
EndSection
Section "dri"
Mode 0666
EndSectionkichawa wrote:@ChemBro root access? Where is more info about that ?
http://nvidia.custhelp.com/app/answers/detail/a_id/3109
Security vulnerability CVE-2012-0946 in the NVIDIA UNIX driver was disclosed to NVIDIA on March 20th, 2012. The vulnerability makes it possible for an attacker who has read and write access to the GPU device nodes to reconfigure GPUs to gain access to arbitrary system memory. NVIDIA is not aware of any reports of this vulnerability, outside of the disclosure which was made privately to NVIDIA. -
Poor performance when using kde desktop effect
Hey,
I'm having trouble when using kde effet (system settings -> desktop -> desktop effects).
I have a dual core E5200 3 ghz, 2 GB memory pc8500 and an HD4850 using fglrx driver, but I got incredible bad performance when using desktop effect and watching video, I can barely watch a 800x600 video in full screen mode without having bad performance, X getting up to 40% cpu usage.
Its really like my graphic card isnt handling the rendering stuff but 3D acceleration is working, I can play 3D game without problem so far (as long as the deskstop effect arent enabled cause the cpu have like a hard time handling both for recent game)
So I guess its some trouble with 2D acceleration or something like that, I read that some people had such issue, but I didnt figure a way to fix it.
Here is my xorg.conf, in case something is wrong with it :
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "dbe"
Load "record"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "RV770 [Radeon HD 4850]"
BusID "PCI:8:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:8:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Thank you for any help.Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "RV770 [Radeon HD 4850]"
BusID "PCI:8:0:0"
EndSection
and
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
I see no reason for those to be there.
make a backup of your xorg.conf and remove / comment those lines. -
[SOLVED] KDE buggy desktop effects in OpenGL
Hello, I've been using gnome as my desktop environment for a while now and I decided to give KDE a try once again, but I'm having some issues.
Everything was perfect:
http://i42.tinypic.com/14l1x8p.jpg
But I noticed that whenever I snap a window to any side of the screen and the stretching effect is displayed this happens:
http://i44.tinypic.com/dm9oyg.png
And If I go back to a small window:
http://i40.tinypic.com/104p15i.png
Now, as soon as I click elsewhere those black/invisible boxes are gone.
As you can see I checked under system settings >> desktop effects >> advanced and, if I change the Compositing Type to Xrenderer the problems are gone, but as you can imagine that is not ideal, this ONLY happens when I select ANY version of OpenGL as the Compositing Type.
I use the proprietary AMD drivers for my HD 6770, I think this problem might have something to do with that.
Any help would be appreciated.
Thanks in advance.
Last edited by LucetLux (2013-10-14 04:30:07)I have replaced your images with links. Please read our forum etiquette concerning images (link in my sig).
-
[solved] KDE 4.6: no desktop effects
Since I upgraded to KDE 4.6, i can't enable desktop effects any more. When I open the desktop effects settings, it says that it can't enable desktop effects because of the following reason, but there is no reason given. (The box below to enable the effects is checked, but disabled. It also says that the desktop effects are disabled temporary.)
I'm using a nvidia graphics card 9600 GT with the current nvidia driver.
Does anyone know what could be the reason for that behavior or does anyone have the same problems?
Last edited by FSM (2011-01-29 14:58:58)I also had this problem a few weeks ago with KDE 4.5... You have to edit your kwinrc (.kde4/share/config/) . You have to change these parameter to the following values:
CheckIsSafe=false
DisableChecks=true
OpenGLIsUnsafe=false
I got this information from the KWin developer. Hope this works for you! -
[SOLVED] NO desktop effects in KDE 4.7.0 with OpenGL as backend
Hey all,
After upgrading from KDE 4.7 RC2 (4.6.95) to 4.7.0, Kwin desktop effects work no more (with OpenGL as backend). I tried upgrading catalyst from 11.6 to 11.7, removing all Kwin related config files and even a new user, but nothing changed. I'm using kdebase-workspace 4.7.0-3 from [kde-unstable] repo. Should I wait for an update, install kdebase-workspace from testing repo or what?
Last edited by Pyruzan (2011-07-29 17:08:24)You are using a version with OpenGL ES enabled. But this doesn't seem to work with ATI cards.
At least not with Catalyst: https://bbs.archlinux.org/viewtopic.php … 53#p966953 looks like radeon works.
Use kdebase-workspace 4.7.0-2 from testing instead.
Last edited by Xerdomii (2011-07-29 15:50:47) -
[SOLVED] KDE, Certain Desktop Effects require OpenGL but can't set it
Certain desktop effects give me an error when enabled (or rather when I try to enable them) saying that they require OpenGL.
I changed the Compositing type to OpenGL and the Qt graphics system to Raster (also tried with the default Native), and I get an error saying that it Failed to activate desktop effects given configuration options.
How can I enable OpenGL and get it all working properly?
Last edited by harsha (2012-08-09 19:02:50)What's you graphics card and drivers? You can have working openGL but your card can be to old to support all the extension required by particular effect. Other effects are working ok and just couple of them are giving error, right? If so it's ok.
Also paste output of glxinfo | grep -i render
Last edited by masteryod (2012-08-09 18:59:43) -
[KDE 4.6.3] [nvidia 275.09.07-1] Kwin crash - No desktop effects
Hi all,
To remove the bug "Konsole crash", I updated nvidia drivers to 275.09.07.
Now, Kwin crashes with : Application: KWin (kwin), signal: Segmentation fault.
No problem when desktop effects are disabled.
Has anyone had the same problem?
Thanx$ kwin --replace
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce G210/PCI/SSE2
OpenGL version string: 3.3.0 NVIDIA 275.09.07
OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
Driver: NVIDIA
Driver version: 275.9.7
GPU class: Unknown
OpenGL version: 3.3
GLSL version: 3.30
X server version: 1.10.2
Linux kernel version: 2.6.39
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Application::crashHandler() called with signal 11; recent crashes: 1
KCrash: Application 'kwin' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/s/.kde4/socket-s/kdeinit4__0
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce G210/PCI/SSE2
OpenGL version string: 3.3.0 NVIDIA 275.09.07
OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
Driver: NVIDIA
Driver version: 275.9.7
GPU class: Unknown
OpenGL version: 3.3
GLSL version: 3.30
X server version: 1.10.2
Linux kernel version: 2.6.39
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Application::crashHandler() called with signal 11; recent crashes: 2
KCrash: Application 'kwin' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/s/.kde4/socket-s/kdeinit4__0
Last edited by Inxsible (2011-06-16 14:23:02) -
Intel video + desktop effects used to work... now it doesn't.
I'm using kde-mod and I'm not sure what happened, but in the last week or two, desktop effects (compositing) has stopped working, and when I drag windows around, there are artifacts and such now. It didn't used to be this way and worked quite well before. I'm using the intel video driver... the card is a fairly recent gmasomethingorother. I really have no idea what to do next.
Here's xorg.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux zeeARCH 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 30 16:12:04 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "name"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "DontZap" "false"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling PS/2 Mouse
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4200000/1048576
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.7.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF4400000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "IBM", prod id 10375
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "IBM", prod id 10375
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS using initial mode 1680x1050
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000246
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x3400bd00 to 0x6603ed00
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 735744 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 2942972 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf4400000
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 36126720 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0xd4020000
(II) intel(0): [drm] mapped back buffer at 0xd3020000, handle = 0xd3020000
(II) intel(0): [drm] mapped depth buffer at 0xd2020000, handle = 0xd2020000
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: XF86DRI Enabled
(WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event11"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) Option "Emulate3Buttons" "true"
(II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
(**) Option "EmulateWheel" "true"
(**) Option "EmulateWheelButton" "2"
(**) Option "EmulateWheelTimeout" "200"
(**) Option "YAxisMapping" "4 5"
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) Option "XAxisMapping" "6 7"
(**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "IBM", prod id 10375
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz)
(II) intel(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz)
(II) intel(0): EDID vendor "IBM", prod id 10375
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0x2a804000
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000: start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
Here is xorg.conf (I know it's shit :-) )
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "name"
Driver "intel"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSectionOk I finally figured it out, well sort of. The issue was that the Netgear was screwing up the DHCP. I new it had to be the the Netgear because the setup worked fine at a friends with a Linksys. The strange thing was that iTunes could see other libraries but not connect even though a ping could not. So I turned off the DHCP server and assigned manual IP's to all the clients. Didn't work, I could see the other clients and share files but the internet was lost. Weird. Next I turned DHCP back on and reset the entire network back to my original configuration. Works like a charm. I don't really know what the issue is and the solution doesn't stick, but it can be replicated without fail. Thanks to everyone.
-
[SOLVED] desktop effects and compiz
Hello all,
Recently rebuilt my system with Arch 32, had 64 on it and mucked it up. Everything appears to be running smoothly, at least as can be. I do have a few questions regarding compiz and other desktop effects.
Whenever I run compiz, it will eventually crash, stripping all borders off windows and I cannot do anything, cannot click anywhere, though I can navigate any open apps on my desktop, just cant bring down menus or such. the only way to fix is a reboot, and a good thing I have been keeping terminal up.
Which brings me to my second question, I have my terminal set to a transparent background, however, the background in terminal is only semi/quasi transparent, meaning my desktop shows through the window, which is great, but when I move the terminal windows over another window, Firefox or Chromium for that matter, the browser doesn't show through terminal but instead my desktop still shows through the terminal. My ubuntu system at work works as expected, meaning when I drag my terminal over other windows, the windows show through the terminal not my desktop. Is there a setting in Arch that I'm missing, or do you know if Ubuntu does some other smoke and mirrors trick?
I have an nVidia 9800GT video card and I installed the drivers, X, and Compiz per the wiki's instructions.
any help would be appreciated, would like to get compiz running smoothly without crashes, which is possible since my ubuntu system has never had compiz crash *knock on wood*.
--nixIT
Last edited by nixIT (2010-11-10 20:20:21)nixIT wrote:Which brings me to my second question, I have my terminal set to a transparent background, however, the background in terminal is only semi/quasi transparent, meaning my desktop shows through the window, which is great, but when I move the terminal windows over another window, Firefox or Chromium for that matter, the browser doesn't show through terminal but instead my desktop still shows through the terminal. My ubuntu system at work works as expected, meaning when I drag my terminal over other windows, the windows show through the terminal not my desktop. Is there a setting in Arch that I'm missing, or do you know if Ubuntu does some other smoke and mirrors trick?
It sounds like your terminal is using fake transparency i.e. reproducing the desktop background while true transparency is using ARGB visuals (and needs a compositor WM).
If you want your terminal to be truly transparent and it doesn't provide an ARGB visuals option, you need to set a custom matching rule in compiz. -
X freezes with enabled desktop effects
Hello,
since today, the X-server freezes shortly after logging into my desktop environment (KDE 4.6.2). Here's a backtrace from the log:
[ 772.951] (EE) NVIDIA(0): Failed to allocate 2D engine
[ 772.951] (EE) NVIDIA(0): *** Aborting ***
[ 772.951] (EE) NVIDIA(0): Failed to allocate 2D objects
[ 772.951] (EE) NVIDIA(0): *** Aborting ***
[ 772.951] (EE) NVIDIA(0): Error recovery failed.
[ 772.951] (EE) NVIDIA(0): *** Aborting ***
[ 822.509] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[ 822.509]
Backtrace:
[ 822.576] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f598]
[ 822.576] 1: /usr/bin/X (mieqEnqueue+0x1f4) [0x49e994]
[ 822.576] 2: /usr/bin/X (xf86PostMotionEventM+0x97) [0x47bd57]
[ 822.576] 3: /usr/bin/X (xf86PostMotionEvent+0xde) [0x47bf6e]
[ 822.576] 4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f36e2576000+0x30f4) [0x7f36e25790f4]
[ 822.576] 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f36e2576000+0x4c0e) [0x7f36e257ac0e]
[ 822.576] 6: /usr/bin/X (0x400000+0x696c7) [0x4696c7]
[ 822.576] 7: /usr/bin/X (0x400000+0x11b933) [0x51b933]
[ 822.576] 8: /lib/libpthread.so.0 (0x7f36e42ee000+0xf750) [0x7f36e42fd750]
[ 822.576] 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x768dd) [0x7f36dead48dd]
[ 822.576] 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x78520) [0x7f36dead6520]
[ 822.576] 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x77105) [0x7f36dead5105]
[ 822.576] 12: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0xdecc2) [0x7f36deb3ccc2]
[ 822.576] 13: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0xcb665) [0x7f36deb29665]
[ 822.576] 14: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x454f8b) [0x7f36deeb2f8b]
[ 822.576] 15: /usr/bin/X (0x400000+0xda3e3) [0x4da3e3]
[ 822.576] 16: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x455d53) [0x7f36deeb3d53]
[ 822.576] 17: /usr/bin/X (0x400000+0xd5a31) [0x4d5a31]
[ 822.576] 18: /usr/bin/X (0x400000+0x2d341) [0x42d341]
[ 822.577] 19: /usr/bin/X (0x400000+0x213ee) [0x4213ee]
[ 822.577] 20: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f36e3274f6d]
[ 822.577] 21: /usr/bin/X (0x400000+0x20f99) [0x420f99]
Package versions:
extra/xorg-server 1.10.1-1
extra/nvidia 270.41.06-1
extra/xf86-input-synaptics 1.4.0-2
This doesn't happen with disabled desktop effects. Does anyone have an idea how to fix this?I'm having a similar issue, but using only dwm with xcompmgr. It doesn't happen at startup, but at some point (in this instance, just a few minutes ago, after having run my computer for 14 hours), my touchpad froze, and not all my keys are acting as they should (for instance, Ctrl-G, to open the url bar with dmenu, in surf, stopped working). This is what I see in my Xorg.0.log:
[ 3289.403] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 51407.244] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[ 51407.244]
Backtrace:
[ 51407.244] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f598]
[ 51407.244] 1: /usr/bin/X (mieqEnqueue+0x1f4) [0x49e994]
[ 51407.244] 2: /usr/bin/X (xf86PostButtonEventM+0xaf) [0x47c25f]
[ 51407.244] 3: /usr/bin/X (xf86PostButtonEvent+0xed) [0x47c41d]
[ 51407.244] 4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f0faab6a000+0x2a31) [0x7f0faab6ca31]
[ 51407.244] 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f0faab6a000+0x4c0e) [0x7f0faab6ec0e]
[ 51407.244] 6: /usr/bin/X (0x400000+0x696c7) [0x4696c7]
[ 51407.244] 7: /usr/bin/X (0x400000+0x11b933) [0x51b933]
[ 51407.244] 8: /lib/libpthread.so.0 (0x7f0faef87000+0xf750) [0x7f0faef96750]
[ 51407.244] 9: /lib/libc.so.6 (__select+0x13) [0x7f0fadfb8903]
[ 51407.244] 10: /usr/bin/X (WaitForSomething+0x19f) [0x459a1f]
[ 51407.244] 11: /usr/bin/X (0x400000+0x2d0c2) [0x42d0c2]
[ 51407.244] 12: /usr/bin/X (0x400000+0x213ee) [0x4213ee]
[ 51407.244] 13: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f0fadf0df6d]
[ 51407.244] 14: /usr/bin/X (0x400000+0x20f99) [0x420f99]
I am using xf86-video-intel 2.15.0-1, xorg-server 1.10.1-1, and xf86-input-synaptics 1.4.0-2.
Last edited by Sara (2011-05-10 03:03:34) -
Changes to desktop effects freezes the screen
Recently I installed Arch linux and Kde for the WM.
I am currently using "KDE Platform Version 4.5.1 (KDE 4.5.1)"
The desktop effects "composting" works but everytime I make a small change to any of the settings the screen freezes for an idefinite amount of time! and when this happens I have to do ctrl+alt+F1 and go to the command line and kill X and then re-enable composting !
Can anyone tell me why this is happening? what should I do to rectify this?
I am having an Intel onboard G41 chipset.
I installed "xf86-video-intel" driver.bashphoenux wrote:what does "this" refer to ???
I was referring to the problem you reported "the screen freezes for an idefinite amount".
I thought it sounded like this:
https://bbs.archlinux.org/viewtopic.php?id=103522
Look at the mail mesage in the link in the 4th post.
Last edited by loafer (2010-09-07 15:15:27)
Maybe you are looking for
-
Pull-down menu for Ring-Constants in module parameter settings?
Hey all, I have a labview VI that has a ring-constant as a control. When I call this VI as an action in teststand and go to the module parameters, then I must enter in a number (I32) instead of having a pull-down menu containing my list of items. T
-
Hello, We have many short ~2 minute files with long filenames (so they can cleanly be used to form the chapter descriptions for the disc) organized into folders and, as mentioned in another thread, we are having difficulties preparing these files in
-
Connect two 7344 motion controllers in one PC
Can I use two NI - PCI 7344 motion controllers in one PC. My application requires 6 axis and hence I want to use two PCI 7344 motion controllers. I am already using one. Can I configure another one in the same PC to add more axes to my current system
-
Hi, does JAAS authentication on the client somehow knock off the need for a ServiceLocator pattern? Scenario: 1) I request reference to a stateful session ejb via ServiceLocator 2) ServiceLocator authenticates with user "anonymous" and creates that e
-
HOW MAY I STOP THE WARNING RE. SECURITY UPON OPENING FIREFOX????????
WHEN OPENING FIREFOX A MESSAGE SCREEN POPS UP RE. SECURITY. HOW CAN I STOP THIS MESSAGE???????????????