KDE: Taskbar is not (left) clickable with multiple Desktops

I don't know exactly the time, when this problem appeared. I guess since any KDE update.
Well, if I increase the number of desktops to more than one, the left click stops working on the task bar. I can't click on minimized windows or symbols in the tray. Right click works though. If I reduce the number of desktops, left click on the task bar works again.
Has anyone the same problem? Or a fix? Thank you.

Hi,
This is system design by default feature, you can refer to the link below for other keyboard shortcut:
http://blogs.windows.com/bloggingwindows/2014/10/03/keyboard-shortcuts-in-the-windows-10-technical-preview/
Roger Lu
TechNet Community Support

Similar Messages

Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

I also thought that this was the case, but that is incorrect. Please see my previous post below:
I was having the same problem with an iPhone 4 and Windows XP. I finally fixed the issue! I read several posts over the past month telling me to make sure that both the PC and iPhone were on the same network. I thought that both were on the same network; however, I was using my "Guest network" to connect my iPhone to my Airport Base Station. In order for both devices to be on the same network, the first 3 numbers of both IP addresses must match. For example, if the PC's IP address is 199.167.1.X, the iPhone's IP address must be 199.167.1.Y. I signed onto my password-protected network from the phone just to see what IP address it would use. As soon as I logged on, my iPhone started to sync wirelessly. I don't know if this will work for anyone else, but I would suggest comparing the IP addresses of your PC and iPhone before doing anything else. For those posting that the PC and iPhone must be on the same Wireless network, my PC is hard-wired to the Airport Extreme and it still works!
My Setup:
iPhone 4 (running IOS 5.0.1)
Dell PC (running Windows XP SP3) (no wireless network card)
Airport Exteme Base Station (5th Generation & updated firmware)

Mail not sending anymore with multiple accounts

Hi
I am experiencing some problem with Mail (v4.5 with SnowLeopard). I cannot send e-mails anymore. This has happened on and off in the last 4 months but now it doesn’t seem to be able to send at all.
When sending I get an e-mail that tells me that the SMTP server is not available and asks me to select another server. I have 3 POP e-mail accounts with the same provider. If I run the diagnostic tool all 3 mail accounts are green so does the SMTP server. The SMTP server was running ok without authentication before.
Reading different threads a partial solution seems to add authentication on the SMTP server (using the first e-mail and the password).
The first e-mail account can now send correctly but the two others are sending but I get a e-mail back telling me that the e-mail could not be sent as the sender e-mail does not correspond to the SMTP account one.
I tried to create 3 different SMTP accounts each one with the specific e-mail address as identifier and the corresponding password, but 2 of them stay off line.
Thank you in advance for your help
C

Hi
I am experiencing some problem with Mail (v4.5 with SnowLeopard). I cannot send e-mails anymore. This has happened on and off in the last 4 months but now it doesn’t seem to be able to send at all.
When sending I get an e-mail that tells me that the SMTP server is not available and asks me to select another server. I have 3 POP e-mail accounts with the same provider. If I run the diagnostic tool all 3 mail accounts are green so does the SMTP server. The SMTP server was running ok without authentication before.
Reading different threads a partial solution seems to add authentication on the SMTP server (using the first e-mail and the password).
The first e-mail account can now send correctly but the two others are sending but I get a e-mail back telling me that the e-mail could not be sent as the sender e-mail does not correspond to the SMTP account one.
I tried to create 3 different SMTP accounts each one with the specific e-mail address as identifier and the corresponding password, but 2 of them stay off line.
Thank you in advance for your help
C

Scroll Bars Not Working Properly with Multiple Displays

Do the following on a laptop that supports having the desktop spread across multiple monitors. Display 1 is the laptop screen, Display 2 is an external monitor.
Open a SQL*Developer window in Display 2.
Open a SQL Worksheet.
Run a query that produces more rows than will fit in the results window, e.g. "select * from user_objects".
Click, hold, and slide the vertical scroll bar handle downward in the results tab.
The rows do not scroll. Garbled characters appear in the last row.
Move the window to Display 1. The scroll bar works properly. Rows scroll up and down and no garbled characters appear.
Note that the horizontal scroll bar produces garbled characters as well.
(SQL*Developer 1.2.1 32.13; Win XP Pro, Oracle XE)

These sort of issues can often be fixed by some combination of
- getting the latest device drive for your graphics card
- using java 6
- specifying -J-Dsun.java2d.ddoffscreen=false as a command line argument for sqldeveloper.
- specifying -J-Dsun.java2d.noddraw=true as a command line argument for sqldeveloper.
You can also add vm options to you sqldeveloper.conf file using the "AddVMOptions -D..." directive

Installing i-Pod/i-Tunes with multiple desktop identities

Can anybody help with this problem please? When I try to install the standard software using the cd-rom provided with my new i-Pod, 2 separate error messages repeatedly come up at different points in the process, depending on how far it gets. The first one (code 1904 I think) refers to the already-installed i-Pod/i-Tunes on my sister's desktop identity. (This is also a fairly new installation). The puzzling thing is that her i-Tunes works perfectly, but I still can't install my own dedicated software (we don't want to share our music files on a single installation).
My sister is also reluctant to uninstall her software as part of the solution to my problem, since she has over 700 songs on it already. The second error report (much further on in the Setup process) states :- error no. 0x800400707 description : Dll function call crashed : ISRT.VerGetFile Version. Setup will now terminate. Any help would be most appreciated. Thanks.
IBM compatible Windows XP

Hi there,
I am wondering if you are still having your
problem?
I try to install the software on my computer and
it
gives me the same error message and then says
access
denied. Just seeing if you have figured yours out.
Hi Sawicki,
I'm afraid I am still no further forward. Unless I am
missing the point from the visible replies already
posted, none of the suggestions actually correctly
address the specific nature of the problem (which is,
in simple terms, the fact that the software was
installed on one identity and continues to work fine.
However, all attempts to install the same software on
another identity meet with the problems which I
originally posted). Aarrgh! Help!
Can you throw any light on the other point I was
making about not seemingly being able to get
technical support directly from the Apple website?
Best Wishes.
IBM
compatible Windows XP
Hi Sawicki,
Did you see the eventual solution to my problem? If not, check it out! (Provided by Buegie/Natalie Beresford).
Best Wishes

Managing dual monitor with multiple desktops

After updating to Lion, I set my macbook up with a few different desktops so I could easily swipe between them instead of searching for the windows I needed. I just set up a second monitor to my mac and noticed that anytime I swipe to a different desktop, both monitors change. Is there a way to "freeze" one while the other moves? Or better yet, can I set up my second monitor to only have one desktop while my mac still has 2 or more?

While we all have MacBooks in this forum most of us don’t run Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Can I create a Formula with Multiple Products [ Not Co Products ] ?

hi There,
Have a simple question & Doubt.
Is it okay to create a Formula with Multiple Products in OPM ? If Yes, how does the Formula behave with respect to Standard Costing Subledger.
If not, what are the reasons for not creating formula with Multiple Products & what are the alternatives to that ?
Thanks,
Dhiraj

hi
U can very well define Multple products in a formula and ur std costing will work fine. But for any By products there is No costing method support. This is Oracles standard.
Now it is clear,,,still any doubt...plz ask
Regards
R Singh
Tech Mahindra Satyam

LYNC 2010 with Multiple Sites and Pools

We have LYNC 2010 Enterprise Pool in North America with 5 Front End servers, 2 Edge Servers. No Director servers deployed. We want to enable Dial-In Conferencing feature for all users across the Globe (to avoid 3<sup>rd</sup> party conferencing
cost…) and proposing 2 additional pools ( one in EMEA and another in APAC regions). I am looking for best practices to deploy multiple pools on multiple central sites.
Do we need to deploy Director Servers? (Microsoft recommend Director, however is this mandatory for multiple pools?)
How can we handle Simple URLs and DNS entries in multiple Edge pools (edge pool in each frontend pool)?
Do we need to publish different ISA firewall rules for simple URLs and mobility?
As we are not planning to replace PBX now, and only looking to provide dial-in Conferencing Bridge with SIP trunking, what is the best practice to provide site resilience in case one central site is down?
Thanks in advance for your help…
Tek-Nerd

Hello.
1. This is a recommendation and it's not mandatory even with multiples pools. The only point if you don't deploy director is that for the first connection, all sig wil go through one pool (the one behind the srv and dns record) and after this pool redirect
the user to the good one (and also do the authentification) .Also director is made to avoid this type of load on one pool (connection from other pool and from edge authentification), but still not mandatory.
2.Simple URL point only on one entry (or pool of RP) somewhere in the world (after there are some unofficial workaround) but don't forget that behind that there is the external web service URL (for each pool) and also an edge association to one pool. And
the user is really using thoses URL and svc (edge associated to the pool as the ext web url)
For the external web svc & edge association, you can create a local edge pool closer to your internal pool so for those user the media will be closer and don't go trhough the world. (exemple you add one emea pool, the media that come from internet goes
through the emea edge and emea RP handling Lync external web services). But the simple urls still point to your main edge/RP pool.
3. Like point before, not mandatory, recommendation if you don't want your media going around the world and coming back. Be carefull the association is still fixed (depending of the user's pool parameter), so if the user travel still using original edge/rp
settings.
4. You can create multiple trunk with lync so have backup in case of one is no more working. After this is hard to say what is the best, this is depending of your infrastructure.
David

FecthAccounts on resources with multiple types of accounts

Hello,
I'm customizing the rename user form so I can modify some account attributes that are related to
accountId and rename them in a propper way. For getting all account attributes on all resources I set
fetchAccounts form property to true but only attributes on resources whose identity template is
simple - It's not a resource with multiple types of accounts - are retrieved.
The attributes of the resource with a setup of multiple types of accounts are not retrieved with fecthAccounts
set to true. Has that happened to you ?
Any clue ?
Thanks,
Pablo C.

You can use Correlation Id for this Purpose. Producer should set Correlation id while posting the message and Consumer can check for Correlation id while dequeue.
I did have this requirement before and used correlation id for it.
http://sriworks.wordpress.com/2009/10/22/conditional-dequeue-mq-adapter/
Or Just Accept Opaque Payload and tweak in BPEL Process using TranslateFromNative function.

Mail Groups with Multiple Contact Email Addresses

I cannot find a way to create a Group in Address Book where the contacts have more than one email address. In fact I have not been able to get emailing to groups with Mail to work at all. I always get prompted to select one of my other outgoing SMTP servers... none of them work, iCloud, Gmail, private domain. I don't understand why this is so difficult.
I have read online that Groups do not support contacts with multiple email addresses... Really? Say it isn't so!

User A can have one mailbox associated with his ID. You can create other "User A" mailboxes with different names and e-mail addresses as shared mailboxes and grant User A full mailbox rights and send as right. User A can
then connect to each one of them separately.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Multiple desktops and how do I remove them?

How do I even end up with multiple desktops and how do I remove them. All gets very confusing!
Thank you

Swipe up with 4 fingers, or press F3 (or fn+F3 depending on how you have your keyboard configured)
At the top of your screen should be all your desktops simply hover your mouse around the top left area of one of them (apart from the first one) and a X will appear which you can click to close it

How do I view multiple desktops/Spaces in a single screen?

I'm used to viewing a large TV with multiple desktops simultaneously in an operating room. I'm wondering if it's possible to separate a TV I have connected to my early 2011 MacBook Pro into four separate desktops (e.g. dividing the TV into 4 quadrants)? I'm assuming there's no legitimate workup using OS X Yosemite but it'd be great to know if anyone has done this before. Thanks.

r9973 wrote:
Sorry, more like: String test = "Some Text Here"Want to convert to String test = "Some Text Here"
Post the code that you used to test the regex. I just tried it and it worked fine for me. All you need to do is apply the regex replaceall to your string variable that holds the string
String test = "Some Text Here";
test = test.replaceAll(" +", " ");
System.out.println(test);And thats it.

SGD VDI vCenter problem accessing multiple desktops simultaneously

Hi,
I am using vCenter as a desktop provider and have created multiple flexible desktop pools in VDI. These desktops pools are then assigned to users in SGD. When accessing these desktops simultaneously through SGD either SGD or VDI gets confused and opens up the wrong desktop. When i open the first desktop from SGD it opens up the correct VM then when i open up another desktop (from a different pool) it opens up the desktop from my previous desktop pool. The name on the Java Window in which the desktop opens up corresponds to the name of the application pool i intend to open however the VM that I login to is from a different pool. I can verify from vCenter that the desktops in the various pools are correct.
Is it not possible to access multiple desktops from different pools simultaneously or is there something that is possibly setup incorrectly? Any assistance will be greatly appreciated.
The versions of SGD/VDI/VCenter are:
SGD Version: 4.5; Build: 20091119205307
Virtual Desktop Infrastructure 3.2.1 (Build 11)
vCenter Server 4.1.0 258902
ESX Server 4.1.0 26047
Thanks.

With multiple tabs open, and selecting a new (blank) tab, RoboForm open new web page in far left tab, not the new (blank) one. How to correct this?

Problem: Firefox Browser Tabs when using RoboForm
When using Tabs in the Firefox browser (with multiple Tabs already open), I (1) click to open a new (blank) tab and then, (2) click on RoboForm to go to a new website. Instead of the new website opening in the newly opened (blank) tab it opens in the first (far left) tab. This only began happening when I installed Firefox 5.0 and RoboForm Desktop v7.3.2 at the same time.
My system: HP Pavilion Media center, Windows Vista Ultimate 64-bit, 8GB RAM, Firefox v5.0, Roboform Desktop v7.3.2

Thanks a lot. The culprit turned out to be Webmail Notifier. Unfortunately, there seems to be some problems on their end that the developer has not yet responded to, but something about the extension is screwing up tab functionality.
Thanks!

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

KDE: Taskbar is not (left) clickable with multiple Desktops

Similar Messages

Maybe you are looking for