[kde-unstable] - ... exists in both 'kdeaccessibility-iconthemes' and

Hi,
I've just tried to install the kde-meta package, and I'm getting errors about files existing in both kdeaccessibility-iconthemes and kdeartwork-iconthemes:
/usr/share/icons/mono/scalable/status/dialog-warning.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/mail-attachment.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/mail-task.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/object-locked.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/object-unlocked.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/security-high.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/security-low.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/security-medium.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/user-away.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/user-offline.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/user-online.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/user-trash-full.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/wallet-closed.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
/usr/share/icons/mono/scalable/status/wallet-open.svgz exists in both 'kdeaccessibility-iconthemes' and 'kdeartwork-iconthemes'
Is this a packaging issue? Or if not, any way to work around this?
Cheers,
Victor

please use the appropriate thread for [kde-unstable].
There is no kdeaccessibility-iconthemes in [kde-unstable], how are you installing KDE? Did you read the wiki page?

Similar Messages

Oracle.DataAccess.Client.OracleDataAdapter exists in both v2 and v4

Hi there,
I am developing ASP Net application with ODP.NET 11.2.0.2.1 and VS 2010. The target framework is .Net framework 3.5 and I've explicitly Oracle.DataAccess reference to v.2, with
<add assembly="Oracle.DataAccess, Version=2.112.2.0, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
, but when it compiled, it throw error
The type 'Oracle.DataAccess.Client.OracleDataAdapter' exists in both
'c:\WINDOWS\assembly\GAC_32\Oracle.DataAccess\2.112.2.0__89b483f429c47342\oracle.dataaccess.dll'
and 'c:\WINDOWS\Microsoft.NET\assembly\GAC_32\Oracle.DataAccess\v4.0_4.112.2.0__89b483f429c47342\oracle.dataaccess.dll'
c:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\esptweb\df172a69\e974c60e\App_Code.eoge0t0f.4.cs
How can I fixed it?
Thanks for the help.

Did you try adding that reference using the Add Reference command in Visual Studio instead? I've never seen it behave like this before.
There are two versions of the assembly, but it shouldn't be trying to load the .net 4 version if you have a reference to the .net 2 version and you're in a 2 (or 3.5) app.

The recent IOs 7.1 has been slow and unstable on both my iPad and iPhone, is there a fix?

The recent IOs 7.1 has been slow and unstable on both my iPad and iPhone, is there a fix? It is very slow, e.g copy and paste from a browser.
iPhone 5 & iPad gen 4

I restarted my phone as suggested and it is still happening.
My phone just blacks out at its own will as if the battery went dead then the apple logo appears and it restarts on it's own but my battery was still at 30% when it restarted. So that made no sense. When I try to type in my password it freezes up before I can get all of the characters in. I still hear the clicks of my tapping on the keyboard but nothing is changing on the screen. When I hit the enter button on accident it vibrated to tell me my password was incorrect but still the screen was frozen with my previous entry of the first 5 characters on the screen.
I am becoming concerned that I may have a very expensive paperweight now.
My husband has the same phone and his is working fine after the initial reboot.

HT201317 i have enabled photostream on my imac but only a small selection of old photos from my iphone have streamed through. How do i get all the existing photos from both my iphone and ipad onto my iMac?

I have enabled photostream on my imac but only a small selection of old photos from my iphone have streamed through. How do i get all the existing photos from both my iphone and ipad onto my iMac?

This usually happens because iCloud only keeps photo stream photos for 30 days (even though your last 1000 photos will remain on your phone until deleted). When you enabled photo stream on your Mac you only received photo stream photos from the last 30 days.
To get older photos to your Mac, create a shared photo stream containing them and invite yourself as a subscriber (see http://help.apple.com/icloud/#mmc0cd7e99). The be sure you check Shared Photo Streams in iPhoto>Preferences>Photo Stream. You can then import them to your iPhoto library by opening the shared photo stream album in iPhoto, then going to Edit>Select All, Control-clicking on any of the selected photos and selecting Import.

[kde-unstable] KDE Applications 15.04 Beta

Packages (x86_64 only) are available for testing in the official [kde-unstable] repo.
New applications in this release: kdenlive, telepathy-kde
Ported to KF5 in this release:
- kdeadmin: kcron
- kdeedu: blinken, cantor, kbruch, kgeography, kiten klettres, kmplot, kstars, kturtle, kwordquiz, rocs, step
- kdegames: bomber, bovo, granatier, kapman, katomic, kblackbox, kblocks, kbounce, kbreakout, kdiamond, kfourinline, killbots, kjumpingcube, klines, kmines, knetwalk, kollision, kpatience, kshisen, ksquares
- kdegraphics: kruler
- kdesdk: kompare, lokalize
- kdeutils: filelight, kcalc, kcharselect, ktimer, print-manager
- kdetoys: kteatime
Please report packaging issues to bugs.archlinux.org (using [kde-unstable] in the description), upsteam issues to bugs.kde.org
Known packaging issues:
- cantor is missing, compilation fails at the moment
- kdeartwork is not packaged, it's mostly stuff for KDE4 which hasn't been updated for years. Same for kde-wallpapers, kde-base-artwork.
- l10n packages are not available, so new KF5 apps will not be translated
- rocs depends on grantlee-qt5, which conflicts with grantlee-qt4, so currently can't be coinstalled with some KDE4 apps such as kdepim, kdevelop or skrooge. Hopefully will be fixed before the final release.
Last edited by arojas (2015-03-23 21:54:10)

fishonadish wrote:
pb wrote:
MilesRdz wrote:No Qt5 Dolphin in this release?
No. Both: Dolphin and all KDE-Baseapps will be in 15.08.
Personally I use dolphin-git version (from AUR) and it works pretty well. It depends only on baloo-widgets from git (and AUR). The all other dependencies are in repositories.
I was going to try this but following the baloo-git dependency, it seems to depend on a lot of git versions
I've just modified PKGBUILD of baloo-widgets-git:
# Contributor: Andrea Scarpino <[email protected]>
pkgname=baloo-widgets-git
pkgver=r408.ebfa75c
pkgrel=1
pkgdesc="A framework for searching and managing metadata"
arch=('i686' 'x86_64')
url='https://projects.kde.org/projects/kde/kdelibs/baloo'
license=('LGPL')
depends=('baloo-frameworks')
makedepends=('extra-cmake-modules' 'git' 'kdoctools')
source=('git://anongit.kde.org/baloo-widgets')
replaces=('baloo-widgets-frameworks-git')
md5sums=('SKIP')
pkgver() {
cd baloo-widgets
printf "r%s.%s" "$(git rev-list --count HEAD)" "$(git rev-parse --short HEAD)"
prepare() {
mkdir -p build
build() {
cd build
cmake ../baloo-widgets \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr \
-DLIB_INSTALL_DIR=lib
make
package() {
cd build
make DESTDIR="${pkgdir}" install
It depends only on stable baloo-frameworks and... so on, it works.
Then build and install this baloo-widgets-git before dolphin-git, and after that install dolphin-git from AUR. This solutions is for those from us, who want to use baloo with dolphin.

Run report that show "BOTH" campaign name AND contact when getting integration error message that relates to Lead Campaign Association

When running an External Calls Failed report for Lead Campaign Association (e.g.Attempted to add a campaign member where either the member id 00Q70000015ngo5 or the campaign id null is null.), the report show me the contact but not the campaign the contact was trying to associate itself to in SFDC. In order to see the campaign, I have to click on the downward arrow and click on the "view external call details" FOR EACH INDIVIDUAL CONTACT.
Is there a report I can run that shows me both the campaign and contact for the error? I can't efficently trouble shoot issues in Eloqua if I have to view each individual record with two or more clicks.
Any advise?

I am getting the same error when opening the J2se Development Kit 5.0 Update 8 after I press the Run button. ( "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package").
Is there a solution ?
Thanks,
Luck 08/21/06

Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
       Internal users
               |
               443
                  |
          Internal LB
        192.168.0.20
        443         443
          |               |
   Lync FE 1     Lync FE 2
192.168.0.21 192.168.0.22
          |               |
      4443        4443
          External LB
       Public IP Address
                 |
              443
                 |
       External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

External hard drive for both a PPC and Intel Mac?

I have 2 LaCie Hard Drives (500GB & 750GB) that I'd like to use for backing up my 2 laptops and for storing photo and music files.
When I got the MacBook Pro, I partitioned the 500GB drive into 3 volumes and used SuperDuper! to make "bootable" copies of the MBP on one volume, theiBook on one volume, and put photo files on the third. I don't know/can't remember how I dealt with the directions below from Disk Utility and I fear I may have done the impossible or at least done the wrong thing.
"If you will use a volume as a Mac OS X startup disk, click Options and choose the appropriate partition scheme. To use a volume to start up an Intel-based Mac, choose the GUID partition scheme. To use a volume to start up a PowerPC-based Mac, choose the Apple partition scheme."
As I ask these questions, I find myself getting tongue-tied so please bear with me and read on...
#1 - Is it *even possible* to do what I want and have the bootable copies of both of these laptops on the same HD since one is PPC and the other Intel? If the answer if yes, it's OK then the rest of this is moot.
#2 - I can easily delete one or the other laptop backup from the 500 LaCie and put it on the virgin 750 and partiton it - problem is, is there a way to know how I partitioned the 500 HD so I won't have to redo it -I don't want to have to recopy the thousands of photo files already on the HD. If I knew how it was partitioned - Intel or PPC - I could just delete the appropriate laptop and move it to the other LaCie, assuming I have to.
#3 - And, is it possible to use a drive that has been partitioned for PPC or Intel with the other type computer - will I be able to access the jpg photo files from both the MBP and my G4 both of which are Tiger no matter which way the HD is partitioned? Now I as able to do this, but as I said, I don't remember which way I partitioned the HD - all I remember is that I did choose to include OS 9 drivers since I still use Classic and OS 9 on the G4. ( I have yet another LaCie that I use exclusively to back up my G4 and it is not part of this issue)
Mrs H

So "To use a volume to start up a PowerPC-based Mac, choose the Apple partition scheme." really means it will work for my Intel MBP too?
Yes.
Is there a way to tell if that is what I already choose?
Select the existing drive in the Disk Utility and find the Partition Map Scheme text at the bottom of the window.
(34529)

How do I Connect both an iBook and Power Mac G5 to Windows XP Pro network?

I have an existing Windows network at home, with a Motorola Surfborad Cable Modem, Linksys Wired Cable/DSL VPN Router with 5-port 10/100 switch (BEFVP41), Linksys Wireless G Access Point (WAP54G), Linksys Etherfast 10/100 Workgroup Switches (EZXS55W v3) and several connected devices including: two Windows Desktops (wired), a Humax TiVo (wireless), Two (2) SlimDevice Squeezeboxes (wireless), and a Microsoft X-Box game system.
For some reason, I cannot successfully connect either a Power Mac G5 (wired) or an iBook (wireless) to the newtork and internet. In both cases, if I attempt to connect them, the router does appear to see them, but I can't get connection to the Internet.
Also, if I try to access either the Router or the WAP via their respective Access URL's: http://10.0.1.1/ & http://10.0.1.2/ nothing happens.
I have disconnected all the other connected devices and tried to connect them with no results.
Re-starting the cable modem, router or WAP didn't help.
If I connect one of the Windows PC's to the same cable I have tried unsuccessfully with the Power Mac, The Windows PC connects to both the Network and Internet immediately!
Additionally, I have checked out the entire wiring system, which are Cat5E cables. This included re-checking all connectors and testing each wire run. All cables are "straight through" with no opens, shorts or cross0overs.
I am sure that I am doing something wrong and that there is an "easy fix", but it's beyond my meager knowledge.
If someone can supply me with "Step by Step", detailed instructions on how to accomplish this, please help me.
Sincerely,
Gordy in Reading, MA - USA
Power Mac G5, iBook & Windows Compat's Windows XP Pro Windows XP Pro SP2, Windows Home Network, Comcast Broadband Internet, Linksys Network Harrdware
Power Mac G5, iBook & Windows Compat's Mac OS X (10.4) Windows XP Pro SR2, Windows Home Network
Power Mac G5, iBook & Windows Compat's Mac OS X (10.4) Windows XP Pro SR2, Windows Home Network
Power Mac G5, iBook & Windows Compat's Mac OS X (10.4) Windows XP Pro SR2, Windows Home Network
Power Mac G5, iBook & Windows Compat's Mac OS X (10.4) Windows XP Pro SR2, Windows Home Network

Hi Gordy,
Well, that's certainly some setup you've got there.
Also, if I try to access either the Router or the WAP via their respective Access URL's: http://10.0.1.1/ & http://10.0.1.2/ nothing happens.
I'm not sure about those URL's. Plug your PowerMac into the router , then launch Safari and type 192.168.1.100 in the address bar it should allow you to access the routers settings via the web-based utility. Please check and see if that much that works and post back.
Jrsy

How do I sync both an iPad and iPhone 4 to the same iMac?

I am combining the functions of a PC desktop and PC Laptop onto a new iMac. I do have VMware's Fusion to run Windows 7 Home Premium, but I'd really like to sync both my iPad (first generation) and iPhone 4 to the Mac and move away from the Windows platform. I used to sync each device to a separate PC. How can I sync both devices to the iMac? In addition, with iCloud, can I determine which apps are synced to each device since some apps are designed for the iPhone and don't have corresponding iPad versions (with full screen size). There are apps for the iPad only that shouldn't be synced to the iPhone. I'd appreciate any advice from folks who sync two portable devices to one Mac system.

Just plug the two devices into the Mac, as if the other one didn't exist. iTunes will keep them separate and allow you control sync of apps and media content as you wish.
As to iCloud, for the iTunes in the Cloud feature, if you use the same iTunes Store account on both the iPad and the iPhone, you'll want to turn off the automatic download option in the Settings -> Store preference pane on your devices. Then you can sync, download and update as you wish on each device.
Regards.

My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it.

My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it. My password doesn't work with the old email address. When I look for my old email address in the Apple ID support area it says that the ID doesn't exist. Help!!!

You have to go to Settings>iCloud and tap Delete Account, then sign back in with your updated credentials. This deletes the account and your synced data from your device, but not from iCloud. Provided you are signing back into the same account and not changing to a different account, your data will be synced back to your device when you sign back in.

Can I get the same text messages on both my iPhone and my iMac

can I get the same text messages on both my iPhone and my iMac
It seems that my Mac is getting them and they dont show up on my iphone.

Hi julian KAYE!
You will want to make sure that both your computer and phone have all options checked in the “Start new conversations from” section in your Messages settings:
iOS: Using Messages
http://support.apple.com/kb/ht3529
You can change the address that new iMessage conversations are started with in Settings > Messages > Send & Receive > Start new conversations from. Note that this setting applies only to new conversations. If you would like to change the address from which messages are sent, first change this setting, and then delete the existing conversation and start a new one.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks for using the Apple Support Communities!
Cheers,
Braden

How to set owner-only access file permissions both on Linux and Windows

Hi everybody.
I have the following problem. I need to store some private user information in file system. So I need to set owner-only access permissions for some directory in user home. I did not find API for doing this. As I understand this is platform specific thing. Could anybody tell me how can I do this both on Linux and Windows?
Thank you in advance.

More ideas just came back to me (of something I did before)
Each OS requires a different control.
For Windows you will need to set the .policy file for each user (a pain if you have more than a dozen of clients) granting access (R or RW) to files/directories.
Then you have to write some native code (access via JNI) to access/modify your authorization.
A more professional solution that I used was J-Integra (other similar tool exist).
Basically it is a bridge between Java and COM. It magically give you access to the COM API from Java (and vice versa).
In my case it was to read/write/modify Winword documents transfered between PC and server.
From memory you have to run the com2java.exe to build the bridge (classes in Java language) between the 2 families. Compile those classes and you have a "driver" for the COM (Microsoft Objects).
Here I must confess my ignorance on Microsoft.
Those COM objets must give you some easy/integrated access to the API for LDAP or Microsoft Active Directory Service (for centralize control with more complex setup).

Downloading both the HD and SD versions of a movie

Usually when I purchase an HD movie, I get both an HD and an SD version. That's good because a familiy member has an older ipod that only plays the SD versions. However, for the Bee movie, when I made the purchase, I only got the HD version. They seel and SD version in the movie store, so I know that both exist. When I go to the "purchased" section of the iTunes store, it says that the Bee movie is Downloaded.
How do I download the SD version of the movie so that I have both?

You can redownload it anyway.If you are unable to, contact support:
http://www.apple.com/support/itunes/store/

I had to replace my hard drive and can't get my Photoshop CS2 9.0.2 to activate. I have tried both the phone and the website and have both the serial number

I had to replace my hard drive and can't get my Photoshop CS2 9.0.2 to activate. I have tried both the phone and the website and have both the serial numbers. I can't find a number that works to speak to a live person at Adobe. I need to reduce the pixel size TODAY on some photos and need the program. Is there another way to reduce pixels if I can't get my Photoshop running today?

Intertech Design wrote:
Where do I get the specially assigned serial number????? I don't want to have to purchase anything since I already bought the CS2 and I don't need a newer version.
Follow the prompts at the link provided by Ned.
Everything's there including your new CS2 non-activation download file and your new non-activation serial number.
It's free for existing owners of CS and CS2. Nothing more to purchase.

[kde-unstable] - ... exists in both 'kdeaccessibility-iconthemes' and

Similar Messages

Maybe you are looking for