KDE unusable after changing theme

I was using KDE, and I decided to change the default theme to another one listed. After which, my entire screen went blank and whenever I log in to KDE, the screen remains blank. I attempted to uninstall KDE and then reinstall it, but it stayed the same. Is there a way to reset it?

stressat wrote:Ctrl+Alt+F1 (F1 or F2, F3...F6)- log in as user and delete ~/.kde4.
Thanks, that helped. Now I just can't install KDE because I don't have enough freespace Even when I enter
pacman -Rnsc lxde followed by pacman -R lxdm to attempt to free up a lot of space. (That is the only DE on my current setup, so I assume that is what is taking up the majority of space). Any tips on that?

Similar Messages

[SOLVED] Cinnamon text unreadable after changing themes

Hello!
I recently installed Arch on my laptop, and decided to try Cinnamon as my DE. Everything worked wonderfully for a while, until I changed themes and then changed the panel layout to flipped (panel at the top). Suddenly all text became rectangles, and stayed that way after I changed it back to panel at the bottom. I uninstalled and reinstalled cinnamon, to no avail. This only happens when I'm using a theme other than the default. Here's an example:
Default theme working as it should
Different theme where everything has gone horribly wrong
I have no idea what's causing this, or how to fix it. I've deleted everything I can find related to cinnamon and reinstalled, and it still does this.
Last edited by Ekkoria (2014-06-06 15:51:08)

I've figured out that if I use a theme designed for the panel-on-top layout, everything works great with the panel still on the bottom, but if I use one designed for the panel-on-bottom layout, it doesn't work properly. It would seem in my case that cinnamon is getting "stuck" thinking that the layout is panel on top when it's really not.
EDIT: This issue seems to have resolved itself. There was a cinnamon update recently, but it did not fix this issue, so I'm not sure what exactly solved it.
Last edited by Ekkoria (2014-06-06 15:50:57)

Error after changing theme in xcelsius for custom component

Hi Experts,
I have created a custom datefield component with inputbinding. The component is working fine in xcelsius. but when I change theme/color scheme in xcelsius, while previewing, it throws me an error:
An error occured when loading the file. The SWF was not created. For more information contact the file creator or your system administrator.
This error comes only once and when I preview again, it works fine untill i change the theme/color scheme again in xcelsius.
Has anyone encountered such problem ?
Thanks

We also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1

Oracle VM 3.0.3 is simply unusable after change of motherboard in OVMS

Hi all,
so let's share some of my feelings about this crap. After so many issues during implementation this platform was finally set up. And was running for only one week with small number of errors. Then during friday motherboard in one of two Oracle VM servers in clustered pool failed and HP replaced it. Fine. Server runs, but Oracle VM manager is remembering old MAC addresses (!!!!!!!!!!!!!!!!!!!!!!!) and I'm not able to get rid off it. Maintenance mode doesn't help, removing from pool doesn't help, can't rediscover because of repository (which is not presented to this server), restart of ovmm doesn't help, restart of that node doesn't help, can't change MAC in web interface and can't remove that server from pool.
So what can I do? If I unpresent second node from storage repository, remove it from pool, destroy pool and create pool again will be there those virtual machines on SAN disk as before of they will be deleted as well? Which "clever" person decided to go through web interface only? How can I remove server from cluster via CLI? And why it remembers old MAC addresses??????????
I'm trying not be ugly, but this is not enterprise ready project. It's parody. Most of the garage-origin project are much more enterprise ready then this one :-(

Hi!
I'm working with the same case, I'll try to explain this once more + additional steps we tried.
We had fully functional cluster with 2 nodes, Node1 and Node2. Node1 overheated, shut down, all VM's migrated to Node2 and are working.MB was replaced by technical personnel. When server was brought up again, we see that new MAC addresses are in place in config files.
We can ssh to that box, no issue at all, network IS working properly.
On other server we have installed Oracle VM Manager. That "smart" manager can not get that Node1 has now different MAC, because that was the only thing which changed. We tried to rediscover the server for Node1, it complains that IP has changed and we need to delete Node1 from cluster and then rediscover the server (Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.IllegalOperationException: If the IP address of this server has changed, please delete the server: Node1, and re-discover.). Fine, we go do that, but now it complains that we can not do that because " OVMRU_002041E Cannot delete/remove pool file system: Pool filesystem for POOLNAME. Server pool: POOLNAME, still has servers in it". What the hell is that? It asks to remove whole pool filesystem just to remove the server which we need to add back again.
I tried to fixup the environment by this method (sh ./ovm_upgrade.sh dbuser=ovs dbpass=<password> --fixup) which did not work.
Then we tried to mess with MAC addresses in config files, we tried to set them to the OLD ones, which worked, our attempt was unsuccessful.
The question how to resolve this? To me this seems to be basic functionality, server burned down we need to replace it, we add it back and works. In Oracle VM solution this is not working, sad.
regards
Mjasnik
Edited by: user12122836 on May 22, 2012 7:19 AM
Edited by: user12122836 on May 22, 2012 7:20 AM
Edited by: user12122836 on May 22, 2012 7:20 AM
Edited by: user12122836 on May 22, 2012 7:39 AM

Shaped layers are not updating in ae after changing them in Photoshop

I created a photoshop CS3 file that has a grid and 3 layers with editable shapes (a graph that has to be changed daily). When importing them into AE CS3 as a comp cropped layers, After Effects sees the layers and layer masks correctly. The problem is when we go back into photoshop and only change the points on the shape layers, save the file, and open the saved After Effects file, the shaped layers are not updated. Even the reload footage does no avail .
Steps to reproduce issue
1. Create a layer in photoshop and make a shape
2. Save the photoshop file.
3. Import the Photoshop file in After Effects as a comp
4. Save the After Effects Project
5. Reopen the photoshop file and edit points on the shape layer.
6. Save the Photoshop file
7. Open the After Effects project.
8. The SHAPE layer WILL NOT UPDATE. The mask is still the same as the original first saved file.

No, they don't. Andrew is correct. Once imported, shape paths from PSDs will become masks and those have no relation to any external reference items. They are AE-internal. The apparent question is, how complex your graphs are. If you check out one of my old tutorials on creativeCOW you can find a line chart rigged with expressions and thus fully editable from within AE. Similar projects can be created for other chart types and in fact I had several of them already on my website (and will provide them again, if and when I get around to finally updating it). Also do not forget that you could use plugins such as Digital Anarchy's Data Animator (now owned by Red Giant and being reworked into an updated version called Datamator)...
Mylenium

HT203421 I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps. Does anyone know what is happening

I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps. Does anyone know what is happening here? Even updating an older game app resulted in the original game icon changing to the new identical icon that all new apps are appearing with. This new icon is like a page with a ruler, pencil and paintbrush. Any tips on how to stop this or how to revert to the icon as it appears on the app store would be appreciated.

https://discussions.apple.com/thread/6132949?tstart=0

KDE/calendar display changed after last upgarde.

Hi,
I'm on a fully update Arch_64/KDE.
After the last system upgrade, the calendar hour display (part of Kontact) changed from the usual HH:MM (e.g., 11:00) to 11'.
I could find where to restore tp the former format.
Please advise1
thanks

If this is your only problem with the new KDE-PIM stuff you're lucky But have you tried changing the format under settings -> "Regional & Language"?
matse

How do I get my web pages back to original size? My fonts are all too large and keep reverting after I change them back!

How do I get my web pages back to original size? My fonts are all too large and keep reverting after I change them back!

That has not worked. I do it and still it reverts. Isn't there a way to tell Firefox to just go back to default settings?

Why capital letters change in lower after copying them from a PDF document, or otherwise, why some uppercase are in fact lowercase when I look in the Text Property in any PDF Reader.

Why capital letters change in lower after copying them from a PDF document (Made by InDesign), or otherwise, why some uppercase are in fact lowercase when I look in the Text Property in any PDF Reader.

your home page to get into your Web site should be index.html (for Mac) or index.htm (on PC)
You can name it something other than index, but will be harder to find. when you create the subjects and link to them, they can can be named anything with the html extension Or if your using PHP end in .php. There is a Microsoft type asp or aspx but your hosting service has to set up using windows server system.
My hosting service use a Linux server normally but can convert Windows for a Fee. UNIX Linux has no concept of asp or aspx.
See this : https://skitch.com/pjonescet/8mnnx/dreamweaver

Windows Theme not applied after changing OS language

Hi,
I have a theme(.theme file) which I have created and applied on my system. However after I change the language from "Control Panel > Region and Language" setting, my theme which was applied goes away. I tried retaining the theme
by Enabling below settings in Group Policy but was of no help.
- Prevent Changing Theme
-Prevent Changing Window Color and Appearance
Does anyone know the solution to this? Any help would be appreciated.
Thanks,
Rommel;

Hi,
For the deny error message, it would be better to use Process Monitor to capture the trace and it would record the deny message when you encounter the error.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If there is any difficult to use Process Monitor,please feel free let me know.
In addition, I'm not suggest you use 3rd theame in Windows 7, it's probably infect system stability with a lot of unknown problem.
Roger Lu
TechNet Community Support

TS2518 My RAW (nikon .NEF) files changing to a dull, darker version of themselves after selecting them for the first time after import.

My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
Is there a fix or is this the straw that forces a switch to Lightroom?

Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made. That information is camera-vendor proprietary.
Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set. If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
Aperture provides a starting point. Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render. In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in. Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image. If you want adjustments in a different direction, you can create a preset and set it at import.
The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that." It's, unfortunately, impossible to do.

After installing Windows 7 my desktop Adobe icons have change in appearance. How do I change them back?

After installing Windows 7 my desktop Adobe icons have change in appearance. How do I change them back?

The file icons is one on the change features MS removed from the Explorer options. Supposedly you can do the change with the registry, though I have not figured out that option. If you want to try, backup the registry first and then you might try the instructions at How to Change a File Type Icon in Windows 7 and Vista - The Winhelponline Blog. If the application icon is not correct, try to fix that before the approach above. Good luck and be careful (dealing with the registry can make your computer not work..

Why does my photos change after importing them?

I've shot hundreds of pictures from a wedding in sunny Toscana, Italy with a new Sony Hybrid Camera. They're all shot in RAW and looks good in the camera preview. When I import the pictures to Aperture, they look the same in the "filmstrip":
But then, after selecting them, they change into extremely overexposed versions that can't be used.
I don't get the same issue when I open them with Photoshop. What is going on?

Toning this down to half helped a lot. But now it looks kind of gray.
By default the settings should be o.k. Leave the "hue" boost at a higher value.
It's a pity, that your first encounter with Aperture is this bad.
Then you have to do all sort of tweaks and tuning to get them back in decent shape.
Is this your first encounter with RAW images as well? RAW photos will generally need a lot of tweaking, since the RAW format is the naked data right of the sensor, without any effects and adjustments applied. RAW is the image format for those photographers that want to develope and tweak the digital negative themselves. If you are happy with the RAW developement that your camera does, consider to set the camera to shoot high quality JPEGS or TIFF images. Then you will have the RAW developement of the camera as the starting point for your own tweaking and do not need to start from point zero and do the basic adjustments as well.

After changing my e-mail address, two iCloud accounts were created, my iphone is unusable due to password requests every few seconds and my account has been blocked. What can I do?

After changing my e-mail address, two iCloud accounts were created, my iphone is unusable due to password requests every few seconds and my iCloud account has been blocked. What can I do?

So, you are saying that you set up a brand new Apple ID and then signed into iCloud with it, correct?
Are you also saying both accounts are disabled for Security reasons? If not, why can't you sign on with the one that is not disabled?
GB

After changing my graphic card to an ASUS Strix GT 970, Photoshop CS6 opens the JPG files without show them on the screen

After changing my graphic card to an ASUS Strix GT 970, Photoshop opens the JPG files without show them on the screen

Try turning off GPU support in your Photoshop's preferences performance section. Also check that you have installed the latest device driver installed for your GT 970 adapter and that all CS6 updates are installed... Your CS6 should be version 13.0.1.3....

KDE unusable after changing theme

Similar Messages

Maybe you are looking for