Kde update 4.9 & problems with auto-grouping windows

Since upgrading kde to the latest version (4.9), I'm having problems getting the window manager to automatically group windows as it used to. It should group windows of okular, for example, by default, but no matter what I do, I can't get this to happen.
I've tried modifying (basically reasserting) the settings for okular in the "windows rules" settings (under "more actions > window manager settings". I've also tried doing this via the new option "more actions > special application settings" which creates a second entry in the list of window rules. I basically have "autogroup with identical" set to "force" "yes" which seemed to do the trick before but no longer seems to have any effect. It is still enforcing placement and geometry for okular windows so it can't be that it isn't recognising the windows as ones to which the settings apply. It seems to be specific to the grouping stuff.
Does anybody have any suggestions? The config seems to have changed a bit and I'm thinking I must have missed some new setting somewhere but I just seem to keep going in circles.

Unfortunately, I am using Oxygen window decorations already.
I do have the "Attach as tab to" option but it is a pain to have to group every window manually.
I've discovered that auto-grouping does work for windows opened on the same virtual desktop but if I open a new okular window from konsole, say, I get a new window on that desktop rather than having it end up attached as a new tab to an existing window on another desktop. I can work around it by having all okular windows start on a standard desktop but this is a pain as I didn't want okular to behave this way.
Thanks for the suggestion, though. I found a lot of my window behaviour got messed up by this update. Mostly it's just a question of resetting things but this one has me stumped.

Similar Messages

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Problem with checkbox group in row popin of table.

In table row popin I have kept Check Box Group.I have mapped the texts property of checkbox group to the attribute which is under the subnode of the table.the subnode properties singleton=false,selectioncardinality=0-n,and cardinality=0-n.
if there are 'n' number of records in the table.each record will have its own row popin and in the row popin there is check box group.
the check box group in the row popin belongs to that perticular row.
but the checkboxegroup values in row popins of all the rows are getting changed to the row which is lead selected.
The same scenario (table in the row popin is showing the values corresponding to its perticular row and all the table values in popin are not getting changed to the one lead selected in the main table)is working fine with the table in place of checkbox group in row popin with datasource property of table binded to the subnode
I cant trace out the problem with checkbox group in place of table.
Please help me in this regard.I have to place check box group in place of table in row popin.
Thanks and Regards
Kiran Kumar K

I have done the same thing successfully with normal check box ui element. Try using check box in your tabel cell editor instead of check box group.

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

HT5815 After update, i have problems with wifi

after update, i have problem with wifi
wifi always falls
I get no internet access
I have to reboot the system to return

Information.
Troubleshooting Wi-Fi connection issues - MacBook Air (Mid 2013)
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

Strange Problem with Code Groups / Codes

Hey all, have a strange problem with Code Groups and Codes.
Our data migration team accidentally loaded an early version of our catalog (code groups and codes) in to our 'Gold' configuration client. They then proceed to delete them all via transaction qs41. However, the code groups have been deleted, but not the codes.
So, basically, no codes groups exist in table QPGR or QPGT but all the entries remain in QPCD with the assigment to code groups. The usage indicator is not set on the codes so why they did not get deleted with the codes groups is unknown.
The issue that this is now causing us is that we can't recreate the codes groups with these codes assigned as the system thinks they already exist (via a check on table QPCD i would expect).
Also, i have been unable to recreate what happened did in other clients... seems very strange.
Any help appreciated.
Cheers

Ben,
You could try SE11, and see if you can delete the records from there.. but I'm not hopeful...
Otherwise you may need to write a quick ABAP program to delete the data base entries.
PeteA

Mail has problem with auto address.

My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

My mail recently has had a problem with auto
addressing. Sometimes it fills in the address, at
other times it will not. I have checked mail
preferences often...making sure auto-address is on. I
CAN use the address book to click on an address when
auto addressing doesn't work. Mail is also quirky
about quitting and sometimes preferences have to be
re-edited to send. Basically, it is behaving badly.
What to do? Thanks ACE
Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

Problems with dinamic group

I migrate the messaing (6.1) and directory(5.2), in the directory migrate the user and group, but i have problems with a group, i send a mail and the user who have menbers no send the mail, and retunt the mail .... and said
Direcci�n del destinatario: [email protected]
Motivo: you are not allowed to use this list: [email protected]
it a dinamic group

Your group must have a restriction on it, that only certain users are allowed to send to the group. If you are not on that list, then you will be prevented from sending to the group/list.
Why don't you examine the ldap entry for the group, and see what's in there?

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

Is there a problem with JFrame and window listeners?

As the subject implies, i'm having a problem with my JFrame window and the window listeners. I believe i have implemented it properly (i copied it from another class that works). Anyway, none of the events are caught and i'm not sure why. Here's the code
package gcas.gui.plan;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.event.WindowEvent;
import java.awt.event.WindowListener;
import java.util.Hashtable;
import javax.swing.JDialog;
import javax.swing.JFrame;
import gcas.plandata.TaskData;
import gcas.util.GCASProperties;
import gcas.gui.planlist.MainPanel;
* MainFrame extends JPanel and is the main class for the plan details window
public class MainFrame extends JFrame implements WindowListener
     * the container for this window
    private Container contentPane;
     * a string value containing the name of the plan being viewed
    private String labelText;
     * a string value containing the name of the window (GCAS - plan list)
    private static String title;
     * an instance of JDialog class
    private static MainFrame dialog;
     * hashTable that correlates the task name to its id as found in the
     * plan
    private Hashtable taskNameToId = new Hashtable();
     * an instance of taskSetPane. This is the current instance of taskSetPane
     * being viewed
    private PlanTaskSet currentPane;
     * instance of TaskData class. Each instance will hold information on
     * an individual task
    private TaskData taskData;
     * hashTable containing instances of the taskSetPane class
    private Hashtable taskSetPanes = new Hashtable();
     * an instance of the OuterPanel class
    OuterPanel mainPanel;
     * an instance of the ButtonPanel class
    ButtonPanel buttonsPanel;
     * an instance of the LeftPanel class
    LeftPanel leftPanel;
     * an instance of the the GCASProperties class
    GCASProperties gcasProps;
    private static MainFrame thisPlanMain = null;
    private MainPanel planListMain;
     * constructor for MainFrame
     * @param frame the parent frame calling this class
     * @param locationComp the location of the component that initiated the opening of the dialog
     * @param labelText the name of the plan that is being viewed
     * @param title title of window
    private MainFrame(JFrame frame, Component locationComp, String labelText,
            String title)
        super(title);
        gcasProps = GCASProperties.getInstance();
        mainPanel = new OuterPanel(labelText, currentPane,
                taskNameToId, taskSetPanes);
        leftPanel = mainPanel.getLeftPanel();
        System.out.println("LABLE: " + labelText);
        leftPanel.setMainPanelContents();
        buttonsPanel = new ButtonPanel(labelText, taskSetPanes,
                taskNameToId, leftPanel);
        contentPane = getContentPane();
        contentPane.add(mainPanel, BorderLayout.CENTER);
        contentPane.add(buttonsPanel, BorderLayout.PAGE_END);
        this.addWindowListener(this);
        this.labelText = labelText;
        pack();
        setLocationRelativeTo(locationComp);
        this.setVisible(true);
        planListMain = MainPanel.getInstance();
        planListMain.setVisible(false);
    public static MainFrame getInstance(JFrame frame, Component locationComp, String labelText,
            String title)
        if (thisPlanMain == null)
            thisPlanMain = new MainFrame(frame, locationComp, labelText,
                    title);
        return thisPlanMain;
    public static MainFrame getDialogObject()
    {   //from the location this is called (ButtonPanel), this will never
        //be null
        return thisPlanMain;
    public static void setABMDDialogNull()
        thisPlanMain = null;
     * returns an instance of MainFrame
     * @return MainFrame instance
    public static MainFrame getDialog()
        return dialog;
     * setter for MainFrame
     * @param aDialog a MainFrame instance
    public static void setDialog(MainFrame aDialog)
        dialog = aDialog;
     * window opened event
     * @param windowEvent the window event passed to this method
    public void windowOpened(WindowEvent windowEvent)
     * The window event when a window is closing
     * @param windowEvent the window event passed to this method
    public void windowClosing(WindowEvent windowEvent)
        gcasProps.storeProperties("PlanList");
        MainPanel abmd = MainPanel.getInstance();
//        planMain = this.getDialogObject();
//        if(planMain != null)
//            planMain.setVisible(false);
//            abmd.setVisible(true);
//            planMain.setABMDDialogNull();
        if(this.getDialogObject()!= null)
            abmd.setVisible(true);
            setVisible(false);
            setABMDDialogNull();
     * Invoked when the Window is set to be the active Window
     * @param windowEvent the window event passed to this method
    public void windowActivated(WindowEvent windowEvent)
     * Invoked when a window has been closed as the result of calling dispose on the window
     * @param windowEvent the window event passed to this method
    public void windowClosed(WindowEvent windowEvent)
     * Invoked when a Window is no longer the active Window
     * @param windowEvent the window event passed to this method
    public void windowDeactivated(WindowEvent windowEvent)
        System.out.println("HI");
     * Invoked when a window is changed from a minimized to a normal state
     * @param windowEvent the window event passed to this method
    public void windowDeiconified(WindowEvent windowEvent)
        //we could have code here that changed the way alerts are done
       System.out.println("Invoked when a window is changed from a minimized to a normal state.");
     * Invoked when a window is changed from a normal to a minimized state
     * @param windowEvent the window event passed to this method
    public void windowIconified(WindowEvent windowEvent)
        //we could have code here that changed the way alerts are done
//        System.out.println("Invoked when a window is changed from a normal to a minimized state.");
}anyone know whats wrong?

It turned out that my ide was running the old jar and not updating it, so no matter what code i added, it wasn't being seen. Everything should be fine now.

Problem with touchpad and Windows 8.1. Acer Aspire E5-511

I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).

SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

Windows 8.1 Problem with games from windows store.

I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

Hi,
According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
Dism /Online /Cleanup-Image /ScanHealth
Also you can test SFC command in Windows 8.1 safe mode.
Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
Roger Lu
TechNet Community Support

Problem with the Finder window in Chrome

Hello,
I have a problem with my finder window in Chrome.
Since the window isn't a separate window anymore, but stuck to the top of the webpage, my finder window is too big. I can't read the "Cancel" or "Send" (I have no idea what's supposed to be there in English but I assume it's something like "send" and "cancel") buttons. I have provided some images of the problem, even if I make the Chrome window as small as possible, the finder window still is too big for my screen. I can resize the finder window from lest to right, but not up or down, which is extremely irritating for me.
If anyone can help me how I can solve this problem.
Thanks!

I found the solution on another thread...Here it is.
"I was having the same problem. I found a way to make it smaller. First, I opened chrome and clicked the green button on the window to make chrome go into full screen. Then I tried to save a file to make the finder window open in chrome. When it opened in full screen I could see the bottom of the window so I resized it to make it a little smaller. Once I did this it remembered the size so now I can access the bottom buttons when I take it out of full screen mode. Hope this helps."
Worked like a charm!

Kde update 4.9 & problems with auto-grouping windows

Similar Messages

Maybe you are looking for