KDE4.1 Do Not Show Windows From All Desktops

So how do I make my KDE4.1 desktop show windows on their own desktop and hide the buttons in the taskbar when I'm on a different desktop? This could be done in KDE 3 I remember.

miggols99 wrote:Easy. Right click task manager, and choose "Task Manager settings". Then tick "Only show tasks from the current desktop".
It's always right under your nose, isn't it...
Thanks for the help bro!

Similar Messages

A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

OK in order to read those files you will need MS Office for Mac or install MS Windows on your Mac. You can get MS Office for Mac from anyone that sells Apple products. I would suggest the Apple Store, Best Buy, Amazon etc...For help getting the data from the memory stick I'd recommend visiting your local Apple Store or AASP and they can help you move it. It should be as simple as plugging the USB drive into your USB port and then open a Finder Window where you will see the drive on the left pane. If you don't know what Finder is or how to open a new Finder window you need the sites I've noted below!!!
Because you are new to OS X I would strongly recommend you bookmark and frequently visit the following web sites:
Switch 101
Mac 101
Find Out How Video tutorials

External hard drive does not show up on my desktop.

I just got this imac and when I plug in my external hard drive it does not show up on my desktop. On all of the macs at school it just shows up but they are running lepoard and I have lion so I don't know if this could make a difference. I have tried draging it droping it but that didn't work.
PS I am just switching from a pc to a mac so I don't know much.

Start a finder window. In the menubar go to Finder > Preferences > General tab > Check show HDs on desktop.
Captfred

Help? my passport for mac (western digital) does not show up on Lion desktop, shows up on older laptop

My new Passport for Mac portable hard drive does not show up on the desktop. when connected to another computer the icon shows up on the desktop. When i first connected it it asked do you want to connect to time machine? I said "later"or "no" because I wanted to research how to use it first. NOw it doesnt show up at all... except in the disk utility section. Please help. I am going on a trip and need to have the storage for films. THanks!

Do you see it in the sidebar of a Finder window, under "DEVICES"?

CLDC emulator is not showing windows mobile emulator as a registered device

Hi,
I want to run one J2ME application on windows mobile 6 emulator. I have done the setup using CLDC emulation on windows Mobile Emulator.
After doing installation of CLDC on emulator, need to register the emulator IP address in SDK. Done that using device-address.exe . Its done successfully.
Though device manager shows IP as its registered address, but emulator does not show the device emulator in its devices list.
emulator.exe -Xquery ------------> does not show windows mobile emulator it its devices list.
Can anyone please help for this. Without this am not able to run my J2ME application on windows mobile emulator.
FYI: I have installed MS Virtual PC but windows mobile 6 emulator is not binded to Virtual Machine Network Services Driver. Because, I am not getting this in drop-down list of adpaters.
I believe it will not make any effect.
Please help.

bkbooth11 wrote:
Hey,
I tried connecting my iPhone to a friends Mac and I wasn't able to see the photos in iPhoto either.
I have solved the problem though, well not me really, I found it in one of the other threads on here about not being able to see the iPhone on iPhoto.
Go through your Camera Roll and get rid of all the pictures in there that weren't taken with the iPhone camera, I had pictures in there that people had sent me via MMS and pictures that I had downloaded from e-mails. I e-mailed myself any important pictures and deleted the rest, leaving just all the photos I had taken with the iPhone camera. Connected to the computer and the iPhone is showing in My Computer again.
Hope this helps everyone here.
Thanks bkbooth11 I did as you suggested and that fixed the problem. Hopefully they will patch that soon as it is rather inconvenient.

The monitors of on location CS3 not showing image from Sony FX7

O.L records OK and plays back but at no time do
any of the monitors show an image. Was OK in Vista now gone to Windows 7
Pre Pro CS3 ok on 7 (capture and playback.) Any suggestions please

Dear Sir, Many many thanks for your very detailed answer everything works just fine. I'm not sure wether I should reply to your answer elsewhere please advise me if this is the case.
thanks again William sign on name Breezley.
Date: Mon, 4 Jan 2010 18:44:18 -0700
From: [email protected]
To: [email protected]
Subject: the monitors of on location CS3 not showing image from Sony FX7
Breezley,
OnLocation CS3 used Direct Draw to create the video window. In Vista, you may have noticed that OnLocation CS3 would disable 'Aero' themed desktops as they did not support Direct Draw. Windows 7 does not have this functionality, so you must disable the Aero theme manually to see the video in OnLocation CS3.
To do this, right click on open desktop and choose Personalize.
This will display available Themes.
Scroll down to the 'Basic and High Contrast Themes'.
Choose any one of the basic or high contrast themes.
Restart OnLocation CS3.
This should bring your video back into view.
>

Accordion not showing up at all in IE6

I have a standard accordion set up at
www.taradeal.com/pow.html
and it works fine in Safari and Firefox, but does not show up at
all in IE6 (the initial load of the text bits flashes up, but the
Spry re-work of the code seem to fail). I'm using Spry 1.6.1,
freshly updated for DW CS3.
The accordion display a standard RSS XML.
Here's some code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html; charset=iso-8859-1"
http-equiv="Content-Type">
<link rel="alternate" type="application/rss+xml"
title="RSS" href="pow-rss.xml">
<script src="SpryAssets-xpath.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryData.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryAccordion.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
<link href="SpryAssets-SpryAccordion.css" rel="stylesheet"
type="text/css">
</head>
<body>
... some table code
<div id="poems" spry:region="powrss" align="left">
<div id="Accordion1" class="Accordion" tabindex="0" >
<div class="AccordionPanel" spry:repeat="powrss">
<div class="AccordionPanelTab">{title}</div>
<div
class="AccordionPanelContent">{description}</div>
</div>
</div>
<script type="text/javascript">

</script>
</div>
...some more simple display, and a Google tracker
</body>
</html>
Thanks for any pointers on what's wrong.
-dan

Well, it seems to be a bug in the handling of the XML file
contents. I fixed it by changing the code in SpryData.js to force a
"manual" parse of the XML code. Not a good solution, but I don't
know the codebase well enough to find the root of the problem. I
know that the firstChild.nodeValue is "Object required" but I can't
figure out who sets that and why. Maybe no ActiveX object?
http://www.taradeal.com/pow2.html
still broken in IE6 if you want to check it
http://www.taradeal.com/pow.html
uses changed code and dynamic-data accordion works
Spry.Data.XMLDataSet.prototype.xhRequestProcessor =
function(xhRequest)
// XMLDataSet uses the responseXML from the xhRequest
var resp = xhRequest.responseXML;
var manualParseRequired = true; /*** DC for IE6 **/

Some Devices are not showing up at all in the Discovery reports

Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.

I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help.

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

How come my hard drive is not showing up on the desktop?

How come my hard drive is not showing up on the desktop?

Those are preferences you speify from INSIDE The Finder:
Finder > Preferences:

We have a DVD in the super drive that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

We have a DVD in the super drive on our Macbook Pro that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

here is a troubleshooting article from Apple about this: http://support.apple.com/kb/ht2801. Hope this helps

XFCE icon box item shows applications from all workspaces

first of all using latest packages...
my XFCE icon box item on the panel shows all tasks from all workspaces regardless of the option "show applications from all workspaces"
the task list item does that properly
what could the problem be?
Last edited by _saiko (2009-04-25 11:04:16)

moljac024 wrote:
_saiko wrote:
whoops wrote:
compiz.
You actually have all applications on one "workspace", it's just divided into several virtual view-ports.
well yes i thought of that since i really use compiz...
but i tried task list item and it works properly even with compiz and virtual ports so that's not an excuse...
Well then, task list takes virtual workspaces into account whereas the IconBox doesn't...
heh well obviously
but if they already removed the feature from task list and ported the icon only display as a separate plugin they should have implemented the "virtual view-ports awareness" too :\

TS2972 my new computer does not show shared from my old computer. how long does this take??

My new computer does not show share from my old computer how long does this take?

I'm having the same problem. I have my main Library on a WXP machine and a new W7 laptop. My iphone 4 sees the library from the W7 machine, but neither the laptop nor the iphone see the big library on the WXP machine. I have configured firewall settings, tried the network wired and wireless, using same apple id on all devices, restarted itunes on all computers, turned sharing off and on on all computers. Nothing works.

HT4759 change do not show up on all my divices like contacts

change do not show up on all my divices like contacts

Are you saying that changes to your contacts are not syncing to your other devices? If so, you need to make sure that the contacts you are changing belong to the iCloud account. To do this, open the contacts app on your device and tap Groups. Do you have any non-iCloud accounts listed, such as On My iPhone, Gmail, Yahoo or an exchange account?
Also go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Do you have the Default Account setting there, and if so, what is selected as your default account.

My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

1. verify on another Mac first. and another port.
2. very likely dead SATA card
read about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

KDE4.1 Do Not Show Windows From All Desktops

Similar Messages

Maybe you are looking for