KDE5 Application menus are not correct

I have always wrestled with little things like this when I toy with KDE. As you can see in this image, my menus are not correct. What is causing this? I'm sorry, but I always get lost trying to sort out what covers button styles, application menu styles, and desktop theme. I can't seem to get these menus to change, but they don't look like what I'm seeing in other's images.
I'm just testing out Plasma 5. What am I doing wrong?

Well it isn't listed as a dependency. At any rate, what I meant was that I hadn't explicitly installed it. If it was part of a group it would have been installed. I did have the breeze workspace theme. Where should one set qtcurve to affect the menus?

Similar Messages

  • Data carrier & application field are not getting displayed in CV04N

    Hi Guru's
    In TCode : CV04N,  data carrier & application field are not getting displayed.
    While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
    Let me know is there any configuration that has been missed out.
    Regards
    Bhanu

    Hi Bhanu,
    Please note that the fields 'Data carrier' & 'Application field'  are visible only if no document type is entered.
    Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
    Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
    Regards,
    Pradeepkumar Haragoldavar

  • The UI text of the menus are not readable so it's impossible to work with

    Hi
     I install the photoshop cs6(x64) and i have the following problem. The UI text of the menus(not the toolbar drop down menus) are not readable so it's impossible to work with. After that, I completely uninstall the cs6 photoshop and i tried to install photoshop cc(x64)-with clean install- but the problem still exist.
    Also I tried to change display settings from 1600x900(recommened)but the problem still exist...I send you some photos of the menus to understand better what I mean.Any suggestions? Specifications
    Toshiba Satellite L775-15NWin 7 Home Premium SP1 x64
    Intel Core i5-2430M 2.4GHz
    Ram 8gb
    Monitor 17"
    Geforce GT 525M

    Right click on your desktop and choose Properties, then choose Window Color, Advanced Appearance settings...
    Click on the Message Text to look at your Message Box item settings.  Is the font Segoe UI, 9 point, color black?
    Also, in Photoshop, check your Edit - Preferences - Interface menu.  What is your UI Font Size there?  Try changing it to something else, closing and restarting Photoshop, then changing it back.
    Lastly, you could try resetting your Photoshop preferences to defaults.  Press and hold Command - Shift - Option simultaneously (or Control - Shift - Alt if on a PC) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
    -Noel

  • Now, in photoshop elements 9 when editing, colours displayed are not correct, seems gama number has changes ?

    up to now I had no problem when editing photos with photoshop elements 9. Due to an  unknown  reason/event the colours displayed , now, are not correct : it looks like the gama adjustment has been changed and the photo rendition is uncorrect. If I display the same photos with other photo editing software ( DPP from Canon for example, or Xnview) , the colours are correct !!... Can you help me ?
    Thanks  a lot !
    JJ Etienne

    Thank you for trying to help me. In fact, I resolved my problem by changing the default ICC profile for my screen : I entered the parameters settings panel, screen definition and then advanced settings where I could choose another ICC profile.
    Thank you anway !!
    JJ

  • ECC IM report, the available and assigned budgets are not correct

    Hi All
    Can any one tell me why there is a difference in the ECC IM report, the available and assigned budgets are not correct on program position level.
    But individual investment order level, they are correct..
    The report we are running is : S_ALR_870122806 .
    Any help higly appreciated and points are assigned .
    Cheers
    ravindra .

    Hi,
    Tcode GR23 , Under 1VK Report library, Choose Characteristics Tab for Company Code Select BUKRS,and GSBER for Business Area.
    Regards,
    Shankar K B

  • Previous Meter Reads and Usage are not  correct after meter Proration

    It seems that during proration there are two meter reading available the one with the Meter Reading type as 03 ( Automatic Estimation ) and other is Meter Reading type 01 - MR By employee that is being  retrieved. The 03 reading type seems to be the reading after the proration and the o1 reading is the reading done before the proration . The reads are coming out on our invoices incorrectly. Usually there will only be one Meter reading  to be picked up. but it seems do proration it splits meter into 2 entries.  The entry  with with metering type 01 has the correct previous  and current meter reads but incorrect usage. The entry with meter read 03 has the incorrect previous meter read and correct current meter read but incorrect usage. Our print work bench generated fiction is  calling SU_DB_ERCHZ_SELECT_BILL_NEW  to retrieve the values but the values that it retrieves are not correct., The second records is being put on the invoice. The form that exist in the  SU_DB_ERCHZ_SELECT_BILL_NEW  is called  db_erchz_select_join and  is used to retrieved the usage and meter reads.. This information is then passed  to out user exit.
    The previous meter read  should be 5,073,998     and the usage should be 7500   
    Service       Meter No.       Previous Read       Current Read        Usage
    Water            750009               5,092,748              5,148,998            56250

    Try resetting the PMU…
    http://docs.info.apple.com/article.html?artnum=14449
    … and then subsequently calibrating your battery…
    http://docs.info.apple.com/article.html?artnum=86284

  • Horizontal Spry Menus are not showing up in ANY browser HELP!

    www.tvnewsjunkie.com
    I am a novice web designer and I need help!
    The above site listed is the site I am currently working on. As you can see the menu bar...is not a menu bar at all but a long list of links along the left side.
    HOWEVER, when I click on LIVE VIEW in DreamWeaver everything looks fine.
    There should be 7 total menu bars with 7 Dropdown menu options each (except on the bottom menu bar which there will only be 4 I believe)
    What am I doing wrong??

    Thank you so much for your help!This matter is certainly closed.
    I just want to add, however, that somehow my Spry Assets folder was placed somewhere outside of the rest of my files! no wonder I was confused.
    Thank you again!
    Grant
    Date: Fri, 17 Dec 2010 23:43:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: Horizontal Spry Menus are not showing up in ANY browser HELP!
    You have forgotten to upload the support files - SpryMenuBar.js and SpryMenuBarHorizontal.css - to the server.
    Gramps
    >

  • French characters are not correctly stored in database with SQLPlus

    Hello everyone,
    I would like to do the following:
    Run an SQL script that inserts/deletes/updates data. The data itself may be
    French or non-English characters .Currently, we do this
    by just running a script that invokes SQLPlus and runs the various SQL
    scripts. However, non-English characters are not correctly stored in the
    database (server character set is currently set to AL32UTF8).
    Is there a way to get this to work in SQLPlus?
    I have tried saving the files in UTF8 or unicode but SQLPlus cannot identify
    the formatting of the file and spits out an error.
    Any hints would be appreciated.
    Thanks,

    If the CharacterSet on server is Unicode, normally, there is no problem IF the client is using a characterset with é or à ! ;-)
    you should set NLS_LANG on client side...

  • Fonts are not correct.

    I have some Japanese documents with embedded Hiragino Mincho fonts (which is serif). But Adobe Reader renders it using some gothic/san serif typeface. iBooks and Safari do render it with the correct typeface.

    Attached is one of these documents with the embedded fonts. I was also not able to put annotations on it.
    Thanks,
    Kenny
    Date: Mon, 16 Apr 2012 09:31:55 -0600
    From: [email protected]
    To: [email protected]
    Subject: Fonts are not correct.
        Re: Fonts are not correct.
        created by pawibbel in Adobe Reader for iOS - View the full discussion
    Hi Kenny,Can you please share one of these documents? If the font is fully embedded, we should support rendering it. Thank you! Pat
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4338112#4338112
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4338112#4338112. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader for iOS by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Files are not correctly named and only 1kb in size - Music Downloads

    I have encountered a different problem. I bought a music album on my Z10, and when i download it, the files are not correctly named and only 1kb in size.
    No error is given when downloading, but when i open it, the phone switches to the music player and clains the file does not exist. When i look on the sdcard, there are files which contain something like this:
    <html><head><title>Object moved</title></head><body>
    <h2>Object moved to <a href="http://media.geo.7digital.com/media/error.aspx?errorCode=2001&amp;errorMsg=The%2btrack%2b'8638556'%2...">here</a>.</h2>
    </body></html>
    Is there any way how I can deal with this problem?

    Ok, does anyone from support read here? I bought this album on 23rd of March. Emails to the appworldsupport email adress from the confirmation email give me just the information back that "direct support is unavailable through this address" I would really like to finally listen to my music... As i paid for it. It still does not download... Is there any email address i can contact for this issue?

  • Date and time mentioned in my mails are not correct.Similar date for all mails

    The date and time shown in my mails are not correct for all the mails its showing 31/5/12 but these mails were received on 1/11/14.

    Incorrect date or time displayed in various applications

  • Cumulative Balances in PCA Balance Sheet cube are not correct.

    Hi
    Could you please help me in sorting out this Issue.
    Cumulative Balances in PCA Balance Sheet cube are not correct.
    After doing a reconciliation my conclusions are:
    Opening balance for 2005 (fiscal period 009.2005) is not in BW
    Opening balance for 2006 (fiscal period 000.2006) is not in BW
    Opening balance for 2008 (fiscal period 000.2008) is not in BW
    Opening balance for 2009 (fiscal period 000.2009) is not in BW.
    With the exception of fiscal year 2007(opening balance is in BW u2013 000.2007) the cumulative balance resets itself at the start of each fiscal year. The attached spreadsheet has an example of the data in BW and screen dumps from R3.
    Please help me how to find Opening balance in BW for PCA
    Thanks
    Bharti

    you need to derive your begining balance based on the fiscal year in your selection. It will be minus 1 year and period 12 for that year.
    pts appreciated.

  • IOS AIR3.6  runtime error 3747 Multiple application domains are not supported on this operating syst

    3747
    Multiple application domains are not supported on this operating system.
    I'm getting this error from an IOS app compiled with air 3.6.
    No code has changed  from Air 3.5 which is error free. Web app / android versions of the same codebase do not error.
    See the stackTrace below ( well done Adobe for providing this since air 3.5 !! )
    I use swfloaders for loading embedded swf vector art graphics. This has not caused any issue until now. Should I load all art into the main app's application domain ?
    The error does not crash the app and I could suppress it easily but is could the tip of the iceberg because application domains are scary stuff.
    Error: Error #3747
            at flash.display::Loader/loadBytes()
            at mx.core::MovieClipLoaderAsset()
            at mx.controls::SWFLoader/loadContent()
            at mx.controls::SWFLoader/load()
            at mx.controls::SWFLoader/initializeHandler()
            at flash.events::EventDispatcher/dispatchEvent()
            at mx.core::UIComponent/dispatchEvent()
            at mx.core::UIComponent/set processedDescriptors()
            at mx.core::UIComponent/initialize()
            at com.komodomath.app::ImageSWFloader/initialize()
            at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
            at mx.core::UIComponent/addChildAt()
            at spark.components::Group/addDisplayObjectToDisplayList()
            at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
            at spark.components::Group/setMXMLContent()
            at spark.components::Group/set mxmlContent()
            at spark.components::SkinnableContainer/set mxmlContent()
            at spark.components::SkinnableContainer/createDeferredContent()
            at spark.components::SkinnableContainer/createContentIfNeeded()
            at spark.components::SkinnableContainer/createChildren()
            at mx.core::UIComponent/initialize()
            at com.komodomath.lesson::SaveStatusCheck/initialize()
            at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
            at mx.core::UIComponent/addChildAt()
            at spark.components::Group/addDisplayObjectToDisplayList()
            at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
            at spark.components::Group/addElementAt()
            at mx.states::AddItems/addItemsToContentHolder()
            at mx.states::AddItems/apply()
            at mx.core::UIComponent/applyState()
            at mx.core::UIComponent/commitCurrentState()
            at mx.core::UIComponent/setCurrentState()
            at mx.core::UIComponent/set currentState()
            at com.komodomath.maingroups::LessonGroup/handleNewLessonClick()
            at com.komodomath.maingroups::LessonGroup/___LessonGroup_KButton1_click_lessonOver()

    same issue as http://forums.adobe.com/message/4736711

  • Help!!! the app Iphoto is closed marking a erros. I go back and open the application and are not photos. How can I recover them? Are not in the image folder.

    I was editing my photos and adding them to a album and suddenly the app is closed marking a erros. I go back and open the application and are not photos. How can I recover them? Are not in the image folder.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • HT5312 my security questions are not correct

    I don't know the answers to my security questions...well I know them but they are not correctly entered

    You need to contact Apple, either through the link in that article or by phoning them.
    (79445)

Maybe you are looking for