Kdemod 4.2 and dual head

I am trying to setup dual monitor in kde 4.2. I ran the command
xrandr --output DVI-0 --right-of VGA-0
but it doesn't work, I get an error msg
Xlib: extension "Generic Event Extension" missing on display ":0.0".
. Doesn't kde 4 support dual head?

what videocard are you using?
I have kde4.2 running smoothly on my nvidia-card with twinview
It's not yet perfect but it runs fine, there are still some problems if you want to use panels on both screens.
Also watch out with gtk-qt, here there are problems with gvim, openoffice, ... if you use it select the gtk style kde4-oxygen, then everything works fine

Similar Messages

Xorg.conf , nvidia 96xx and dual head failure

i cant get Xorg to work with nvidia driver at all.
here is where i am.
setup aurch linux [X]
setup xserver with NV driver 1 head[X]
setup dual head[]
ok so i cant even get nvidia drivers to work or dual head on the NV driver.
i dont have an xorg.conf setup but i have tried the xorg.conf from my fedora setup but it just black screened.
here is my error log.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux mypc 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 24 03:43:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Device0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0622:1462:1270 nVidia Corporation G94 [GeForce 9600 GT] rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000d800/128, BIOS @ 0x????????/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 16:13:29 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:54:58 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Ive tried everything i could think of or what arch wiki could. I came to aurch linux to learn more about linux (fedora holds your hand to much.) but i dont think i can figure this one out on my own.

serverman,
let me see if I understand your situation.
You are using the nvidia drivers and want to setup a dual screen with independent screens (?).
Without a xorg.conf one screen should work out of the box with one screen.
For the proprietary drivers you will need a minimal xorg.conf:
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
DefaultDepth 24
EndSection
This still has only one screen, but can you try it and tell what happens ?
Mektub

Kdemod 4.2 with dual head

I want to use dual head setting in kde 4.2 but it has bunch of issues. When in kde4 i issue the command
xrandr --output VGA --left-of LVDS
, it enable the dual head setup but the resolution defaults to 1024x768 for both my monitor and Laptop. When I change the resolution to the correct ones from the kde4 display setting in control panel, it screws up the dual head setup and the screens starts overlapping.
Has anyone managed to set dual head on kde4.

Two weeks late, but anyway...
You can set the position for the second monitor too.
xrandr --output DVI-0 --pos 1680x0
This works for my setup. The systemsettings xrandr module doesn't, how am I supposed to use that?

Xorg 6.8 and dual head setup

Hello,
I have a laptop with an ATI 9600 mobile chip which ran in xinerama mode fine for the previous release of xrog or xfrree86 but with the new xorg reslease 6.8 I can no longer run 2 monitors. It will run fine in single head mode, but it will no longer run in dual mode. In fact, it "seems" to run faster and take less memory in single head mode,
I am posting my xorg.conf in the hope that someone can help!
Section "ServerLayout"
Identifier "Single"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "Dual"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "Xinerama"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/X11R6/lib/X11/fonts/terminus"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
#Option "Protocol" "auto"
Option "Protocol" "ImPS/2"
#Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "LCD"
VendorName "Laptop"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
VendorName "GWY"
ModelName "GWY00c0"
HorizSync 30 - 96 # DDC-probed
VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DRIReinit" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "OverlayOnCRTC2" # [<bool>]
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # 
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Identifier "Card0"
#Driver "fglrx"
#Driver "ati"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility 9600"
Screen 0
#Option "AGPMode" "2"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card1"
#Driver "fglrx"
#Driver "ati"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility 9600"
Screen 1
#Option "AGPMode" "2"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "LCD"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor0"
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Thanks,
Jason

Hello,
I have a laptop with an ATI 9600 mobile chip which ran in xinerama mode fine for the previous release of xrog or xfrree86 but with the new xorg reslease 6.8 I can no longer run 2 monitors. It will run fine in single head mode, but it will no longer run in dual mode. In fact, it "seems" to run faster and take less memory in single head mode,
I am posting my xorg.conf in the hope that someone can help!
Section "ServerLayout"
Identifier "Single"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "Dual"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "Xinerama"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/X11R6/lib/X11/fonts/terminus"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
#Option "Protocol" "auto"
Option "Protocol" "ImPS/2"
#Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "LCD"
VendorName "Laptop"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
VendorName "GWY"
ModelName "GWY00c0"
HorizSync 30 - 96 # DDC-probed
VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DRIReinit" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "OverlayOnCRTC2" # [<bool>]
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # 
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Identifier "Card0"
#Driver "fglrx"
#Driver "ati"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility 9600"
Screen 0
#Option "AGPMode" "2"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card1"
#Driver "fglrx"
#Driver "ati"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility 9600"
Screen 1
#Option "AGPMode" "2"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "LCD"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor0"
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Thanks,
Jason

Solaris 10 x86 w/ Matrox G450 dual head and xinerama

I have solaris 10 x86 with matrox g450 dual head and x.org x-server. The problem is to get xinerama work. When xinerama isn't enabled, two different desktops work well - or, they work, but they are pretty useless because I can't move windows between them. So, I have to enable xinerama, but it seems, that neither JDS/Gnome nor CDE haven't been built including support for xinerama.
When I enable xinerama, X.org-x-server starts fine and there's dtlogin. When I login and it passes execution to gnome, it fails and x-server restarts. Same with CDE. But if I put 'exec /opt/sfw/bin/xterm to my .dtprofile', it starts ok and I can do some testing..
% dtwm
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 149 (XINERAMA)
Minor opcode of failed request: 2 (XINERAMAGetScreenCount)
Resource id in failed request: 0x0
Serial number of failed request: 18
Current serial number in output stream: 18
% gtk-demo
The program 'gtk-demo' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadWindow (invalid Window parameter)'.
(Details: serial 13 error_code 3 request_code 149 minor_code 2)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line 
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
% gtk-demo --sync 
The program 'gtk-demo' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadWindow (invalid Window parameter)'.
(Details: serial 13 error_code 3 request_code 149 minor_code 2)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line 
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
If I start /opt/sfw/bin/fvwm2, it works fine too, so the problem seems to be gtk/glib/gnome and CDE. One odd thing is that, normal CDE-programs, like dtterm, dtcm, dtcalc etc. works fine. But dtwm doesn't work in xinerama mode.
So, would anyone have any suggestion what could I do? Do I have to recompile my own GNOME, or could Sun do something to the next Solaris 10 update? (As far as I understood, current Solaris 10 release doesn't include zfs yet, so there will be update soon, I think)
- Tuomas M

Hello,
I'm also using a g450.
Now I'm trying for 5 days to get it work with xinerama under Xorg and/or
Xsun.
Can anybody tell me how to get it work ?
I would like to see a working xorg.conf.
(I don't know how to configure 2 screens for Xsun. Mybe someone can give my his configuration file(s) ?)
Thanks to all who will help me !!!
p.s. here is my latest attempt of xorg.conf which does not provide xinerama for me:
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "Screen 0" 0 0
Screen 1 "Screen 1" Rightof "Screen 0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "Xinerama" "true"
# Option "Clone" "off"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "bitstream"
Load "type1"
Load "Xst"
Load "IA"
EndSection
Section "Files"
RgbPath "/usr/X11/lib/X11/rgb"
FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11/lib/X11/fonts/local/"
# FontPath "/usr/X11/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11/lib/X11/fonts/freefont/"
# ModulePath "/usr/X11/lib/modules"
EndSection
# Input devices
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/kdmouse"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "nec"
VendorName "NEC"
ModelName "NEC LCD"
HorizSync 30.0 - 81.0
VertRefresh 50-90
EndSection
Section "Monitor"
Identifier "nec2"
VendorName "NEC"
ModelName "NEC LCD"
HorizSync 30.0 - 81.0
VertRefresh 50-90
EndSection
# Graphics device section
Section "Device"
Identifier "Matrox"
Driver "mga"
VideoRam 32768
BusID "PCI:01:00:0"
# Insert Clocks lines here if appropriate
EndSection
Section "Device"
Identifier "Matrox2"
Driver "mga"
VendorName "Matrox"
BoardName "Matrox Millennium G450"
BusID "PCI:01:04:0"
# Option "MGASDRAM"
EndSection
# Screen sections
Section "Screen"
Identifier "Screen 0"
Device "Matrox"
Monitor "nec"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Matrox2"
Monitor "nec2"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

VDI and 7410 dual head ssh certificates

Hi all,
Is it possible to assign two ssh certificates for one storage ? In 7410 dual head configuration, each head has its own ssh private key. When failover occurs, the VDI is unable to communicate with the other head, because the ssh storage-server key is changed.
The ISCSI access is OK, desktops are running, but the cloning, reconfig etc is not possible anymore. We need to do failback first.
I've asked the Oracle to find a way how to assign the same public/private keys for both heads on 7410, but it is not supported yet. The easiest way (I think) is to allow more than one ssh certificate for storage server in VDI ?
Or any other hints ?
Thanks very much ...
Marek

As for KDE4, it does not support two independent screens yet (even 4.2 doesn't!). And until the current catalyst version dual screens even didn't work in Xfce for me, I also had freezes.
You could try using ATI big desktop instead, as I do atm with KDE4. Just folllow the steps I describe in this thread, # 9 (minus 'install catalyst') to set it up.
And please don't write standard with t, mein Strumpfbandfuehrer. (just an insider joke)
SignorRossi.

[SOLVED] Configure dual head with different resolutions xf86-video-ati

I have 1680x1050 and 1280x1024 monitors which I would like to setup so that I have two displays (:0.0 and :0.1), i.e. can't drag a window to the other display, but can move the mouse from one screen to the next. The graphics card is Radeon HD 4850.
At the moment I have one screen only, so I can't move the mouse from the first to the second screen, it is captive in the first screen.
xrandr -q
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680
HDMI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0 70.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0 70.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+
1600x1200 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1152x864 75.0
1280x720 60.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
xorg.conf:
Section "ServerLayout"
Identifier "dual head configuration"
Screen 0 "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 444 277
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 339 271
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "radeon"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Xorg.0.log:
(==) ServerLayout "dual head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Keyboard0"
It doesn't look as if xrandr can help as it reports a maximum virtual desktop of 1680x1680.
Because the two monitors are different resolutions I don't know if a single screen is the answer.
I used to have two displays/screens configured to two different resolutions matching the monitors using the catalyst driver but can't get it working using the xf86-video-ati driver.
Any help would be appreciated.
Thanks
Willem
Last edited by Willem (2010-01-02 20:42:41)

Thanks, with your help I was able to get it working.
The xorg.conf relevant sections:
Section "ServerLayout"
Identifier "dual head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 444 277
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 339 271
Option "RightOf" "Monitor0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
BusID "PCI:2:0:0"
Option "Monitor-HDMI-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Would still be interested to get a seperate display for each monitor working though.

Frozen system when booting with dual-head setup (updates)

Hi guys,
I made a fresh install a couple of weeks ago and I configured my system for a dual-head setup following the wiki. I activated KMS and added radeon to the kernel parameters.
My xorg.conf looks like this:
Section "Monitor"
Identifier "DVI-0"
Option "PreferredMode" "1920x1080"
Option "Position" "0 0"
EndSection
Section "Monitor"
Identifier "HDMI-0"
Option "PreferredMode" "1920x1080"
Option "Position" "1920 0"
EndSection
I was having random freezes for a couple of days, but I didn't pay too much attention to it. I hard rebooted my computer when it froze and it could boot normally that second time.
But after yesterday, last update to the open source drivers xf86-video-ati (1:7.5.0-2) and lib32-mesa-libgl (10.5.2-1), my system doesn't boot unless I disconnect one of the screens. When only one screen it's connected everything is fine. If I plug the second screen, it pops up the KDE service to configurate the second screen but as soon I press 'apply the chages' my system freezes and I had to hard reboot.
I've tried all possible combinations usingt different outputs from the screens, getting the same results. Two of them connected --> freezes after grub loading. One connected --> boot Ok, but as soon as I plug the second one and I apply changes, freezes.
I found one configuration that doesn't freeze my system. When I plug the second screen, as I said, KDE service automatically pops up. Before I was changing the positions of the screen, one beside the other one, and my system freezes when I apply the changes. If I just left the default configuration (one screen in top of the other), it doesn't freeze my system. After that, I can rearrange the screens, as I need them, and it doesn't freeze.
Here it is my grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 e36984ca-21d8-4191-ba2f-a09bf8ce6f88
else
search --no-floppy --fs-uuid --set=root e36984ca-21d8-4191-ba2f-a09bf8ce6f88
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e36984ca-21d8-4191-ba2f-a09bf8ce6f88' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 128c8e95-9496-49d1-9a9e-bc886662258d
else
search --no-floppy --fs-uuid --set=root 128c8e95-9496-49d1-9a9e-bc886662258d
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=e36984ca-21d8-4191-ba2f-a09bf8ce6f88 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-e36984ca-21d8-4191-ba2f-a09bf8ce6f88' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-e36984ca-21d8-4191-ba2f-a09bf8ce6f88' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 128c8e95-9496-49d1-9a9e-bc886662258d
else
search --no-floppy --fs-uuid --set=root 128c8e95-9496-49d1-9a9e-bc886662258d
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=e36984ca-21d8-4191-ba2f-a09bf8ce6f88 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-e36984ca-21d8-4191-ba2f-a09bf8ce6f88' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 128c8e95-9496-49d1-9a9e-bc886662258d
else
search --no-floppy --fs-uuid --set=root 128c8e95-9496-49d1-9a9e-bc886662258d
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=e36984ca-21d8-4191-ba2f-a09bf8ce6f88 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
And my fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda2 resto del disco
UUID=e36984ca-21d8-4191-ba2f-a09bf8ce6f88 / ext4 defaults,noatime,discard 0 1
# /dev/sda1 100MB
UUID=128c8e95-9496-49d1-9a9e-bc886662258d /boot ext4 defaults,noatime,discard 0 2
# /dev/sdc2 10GB
UUID=3959515c-30e4-4749-bc30-5babba3311e8 /var ext4 defaults 0 2
# /dev/sdc3 resto del disco
UUID=8ccc2ed9-35e5-4a4f-81f1-98cc8bfc4ed1 /home ext4 defaults,noatime 0 2
# /dev/sdc1
UUID=35e39da9-c942-434d-bbfc-deb5e40ee8be none swap defaults 0 0
#montaje de temp en ram
tmpfs /tmp tmpfs nodev,nosuid,size=3G 0 0
# External HDD
UUID=0ae5eb6a-8c4c-480c-8efe-609ae83f2bdc /media/External\040HDD ext4 defaults 0 0
# Seagate Expansion Drive
UUID=16668D4B668D2C95 /media/Seagate\040Expansion\040Driventfs-3g defaults,nofail 0 0
What else should I check?
Thanks in advance.
Edit: added info
Edit2: more tests.
Last edited by doblerone (2015-03-31 08:12:38)

Rexilion wrote:Maybe try looking at /var/log/pacman.log and see if you can downgrade packages (start with the kernel). See if that works around the problem.
Downgrading catalyst to 14.3 seems to have done the job. Thanks for the suggestion, marking as solved.
Inxsible wrote:bheinks, you have been on the forums long enough to be aware of the forum rules. Make use of an image hosting site.
Sorry, I don't post often and wasn't aware of the rules on images. I'll keep that in mind next time.

Dual head setup (mach64 - ATI Rage Mobility)

hello everyone!
I want to use a new extra monitor I got recently, with my laptop, I use aweosme.
I have installed:
xf86-video-mach64 (recompiled with dri support)
mach64-dri (from community)
mach64drm (from AUR)
https://wiki.archlinux.org/index.php/Mach64
Still I can't get OpenGL to work:
ismaelvc@toybox ~ $ glxinfo | egrep "direct rendering|OpenGL renderer"
direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on softpipe
I don't really know if it got something to do with this but I post it anyway in case it is.
xrandr doesnt detect the other monitor:
ismaelvc@toybox ~ $ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 87.0* 85.0 75.0 70.0 60.0 81.0
832x624 75.0
800x600 85.0 75.0 72.0 60.0 56.0
640x480 85.0 75.0 73.0 60.0
720x400 85.0
640x400 85.0
640x350 85.0
512x384 87.0 85.0 75.0 70.0 60.0
416x312 75.0
400x300 85.0 75.0 72.0 60.0 56.0
320x240 85.0 75.0 73.0 60.0
360x200 85.0
320x200 85.0
320x175 85.0
Still it displays exactly the same that gets displayed at my laptop.
I used to had problems with the drivers, I needed both mach64 and radeon for it to detect the screen properly, until I created a "20-mach64.conf" with this:
Section "Device"
Identifier "Card0"
Driver "mach64"
Card "ATI Rage Mobility - Mach64"
Option "DMAMode" "async"
Option "ForcePCIMode" "false"
Option "AgpMode" "2"
Option "AgpSize" "32"
Option "BufferSize" "2"
Option "LocalTextures" "true"
Option "EnablePageFlip" "true"
EndSection
Section "Module"
#<Your modules>
Load "glx"
Load "dri"
EndSection
Section "DRI"
Group "video" #change to any desired group to restrict access
Mode 0660
EndSection
I have a doubt regarding the commented line that came as example in the mach64 wiki that reads <your modules>, I don't know what goes in there.
Also I red this for some mach64 related xorg info:
http://www.x.org/archive/X11R6.8.0/doc/ati5.html
http://forums.fedoraforum.org/showthread.php?t=201482
The last one is for a cursor problem I have, but it wont get fixed, neither, anyway the default xcursor looks good in awesome, I switched to cli apps form many tasks, and use uzbl now! all this plus arch is now so minimmal I love it lol!
I red in a post (not in this one) mach64 chips supported dual head, but I can't find it again, I will post it when I find it.
Thanks in advance!
EDIT: ok here it is, where it say its supported: I don't understand all the configs.
http://cgit.freedesktop.org/xorg/driver … ff432c36bf
Last edited by ismaelvc (2012-06-29 03:52:09)

Sorry to necrobump but I was seeing you get a lot of incorrect information on LinuxQuestions.
The mach64 driver does NOT support dualhead. Some chips are capable of it but this feature has yet to be added to the driver. It is also not compatible with xrandr. The man page you linked to mentioning dualhead support is for xf86-video-ati. It is only accessible from the git history of xf86-video-mach64 because those drivers used to live in the same source tree.
I can try to help with DRI if that's still not working for you.

Xrandr not listing dual head outputs

I'm running into a little annoying problem with xrandr. It doesn't want to list my nvidia 8800gt's dual heads as different outputs.
[foosoft@asakura ~]$ xrandr
Screen 0: minimum 320 x 175, current 1920 x 1200, maximum 1920 x 1200
default connected 1920x1200+0+0 0mm x 0mm
1920x1200 50.0*
1680x1050 51.0 52.0
1600x1200 53.0 54.0
1440x900 55.0 56.0
1400x1050 57.0 58.0 59.0
1280x1024 60.0 61.0 62.0
1280x960 63.0 64.0
1152x864 65.0
1024x768 66.0 67.0 68.0 69.0 70.0 71.0 72.0
960x720 73.0 74.0 75.0
928x696 76.0 77.0
896x672 78.0 79.0
832x624 80.0
800x600 81.0 82.0 83.0 84.0 85.0 86.0 87.0 88.0 89.0 90.0
720x400 91.0
700x525 92.0 93.0
640x512 94.0 95.0 96.0
640x480 97.0 98.0 99.0 100.0 101.0 102.0 103.0 104.0
640x400 105.0
640x350 106.0
576x432 107.0
512x384 108.0 109.0 110.0 111.0 112.0
416x312 113.0
400x300 114.0 115.0 116.0 117.0 118.0
360x200 119.0
320x240 120.0 121.0 122.0 123.0
320x200 124.0
320x175 125.0
So it only lists "default" even though I have a second monitor plugged in over DVI (a TV actually). I know it's not a problem with output to the TV because if I specifically set up output in xorg.conf it works fine. However I would much prefer to enable and disable output to TV on an as-needed basis.
Here's my xorg.conf:
[foosoft@asakura ~]$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Tue Oct 20 21:25:04 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" Above "Screen0"
Option "Xinerama" "0"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Gateway FHD2400"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "SONY TV"
HorizSync 15.0 - 46.0
VertRefresh 59.0 - 61.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GT"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GT"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: 1280x720 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
EndSection
And my X11 log:
[foosoft@asakura ~]$ cat /var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH x86_64
Current Operating System: Linux asakura 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64
Kernel command line: root=/dev/disk/by-uuid/3695c065-a8fe-4574-9ae8-d67e25387b14 ro
Build Date: 12 December 2009 08:39:02PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 26 15:37:16 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Ignoring unrecognized extension "AGPFastWrite"
(WW) Ignoring unrecognized extension "EnablePageFlip"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c09a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0611:1462:8010 nVidia Corporation G92 [GeForce 8800 GT] rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000af00/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:42:04 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
(**) Dec 26 15:37:17 NVIDIA(0): Enabling RENDER acceleration
(II) Dec 26 15:37:17 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Dec 26 15:37:17 NVIDIA(0): enabled.
(II) Dec 26 15:37:19 NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)
(--) Dec 26 15:37:19 NVIDIA(0): Memory: 524288 kBytes
(--) Dec 26 15:37:19 NVIDIA(0): VideoBIOS: 62.92.12.00.04
(II) Dec 26 15:37:19 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Dec 26 15:37:19 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Dec 26 15:37:19 NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0:
(--) Dec 26 15:37:19 NVIDIA(0): Gateway FHD2400 (DFP-0)
(--) Dec 26 15:37:19 NVIDIA(0): SONY TV (DFP-1)
(--) Dec 26 15:37:19 NVIDIA(0): Gateway FHD2400 (DFP-0): 330.0 MHz maximum pixel clock
(--) Dec 26 15:37:19 NVIDIA(0): Gateway FHD2400 (DFP-0): Internal Dual Link TMDS
(--) Dec 26 15:37:19 NVIDIA(0): SONY TV (DFP-1): 330.0 MHz maximum pixel clock
(--) Dec 26 15:37:19 NVIDIA(0): SONY TV (DFP-1): Internal Dual Link TMDS
(II) Dec 26 15:37:19 NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
(II) Dec 26 15:37:19 NVIDIA(0): Assigned Display Device: DFP-0
(II) Dec 26 15:37:19 NVIDIA(0): Validated modes:
(II) Dec 26 15:37:19 NVIDIA(0): "DFP-0:nvidia-auto-select+0+0"
(II) Dec 26 15:37:19 NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) Dec 26 15:37:19 NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) Dec 26 15:37:19 NVIDIA(0): option
(==) Dec 26 15:37:19 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Dec 26 15:37:19 NVIDIA(0): Initialized GPU GART.
(II) Dec 26 15:37:19 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Dec 26 15:37:19 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Dec 26 15:37:19 NVIDIA(0): configuration option may not be set correctly. When the
(II) Dec 26 15:37:19 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Dec 26 15:37:19 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Dec 26 15:37:19 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Dec 26 15:37:19 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Dec 26 15:37:19 NVIDIA(0): Config Options in the README.
(II) Dec 26 15:37:19 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) Dec 26 15:37:19 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Dec 26 15:37:19 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)
(**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
(**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event5"
(II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
(II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
(II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
(II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
(II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
(**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE)
(**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
(II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Any ideas?
Last edited by FooSoft (2009-12-26 23:50:25)

ROOKIE wrote:If VGA-0 was to the right of LVDS then the virtual screen size was big enough to accommodate both screens.
Your dead right, it did work but now for some odd reason the virtual screen size is no longer large enough to accom' both screen.
ROOKIE wrote:Which driver did you say you are using?
I installed xf86-video-ati and assume it is loading fine.
Cyrusm wrote:oh yeah, do you think you could post your xorg.conf
I would love to but I do not have such a thing, I can post my Xorg.0.log if you would like to take a look. I believe I am trusting HAL to auto configure each time so xorg.conf doesn't exist. All seems like black magic to me but to date has worked well.
Will I need to create an xorg.conf file, populate it and get it working to be able to use both screens as well as to be able to play video on VGA-0?
I can duplicate LVDS onto VGA-0 but again video will not play on VGA-0.
Thank you both so far with you help. Would love to sort this out and if I need to get dirty with and xorg.conf file then so be it.

Setting up independant dual-head configuration in the usual way?

I'm preparing to set up a dual monitor system pretty soon using an ATI Radeon card. I went through the wiki and read what the ATI page has to say:
Independent dual-headed setups can be configured the usual way
The problem is that it gives no indication of what the usual way is. I vaguely have an idea that I might need xinerama, but couldn't find a wiki page on that either... I've also tried googling with limited results.
Is anyone able to let me know of a good resource for this?
Last edited by phunni (2011-12-26 20:15:38)

Check this out: https://wiki.archlinux.org/index.php/Xorg
I'm using a radeon 6870 with kde and in my case I was able to set up my dual screens using Settings > System Settings > Hardware > Display and Monitor > Size & Orientation, clicking Save as Default once I had things set up the way I wanted made the settings permanent
If you're going to use Ati's catalyst control center driver then you should probably also read this page: https://wiki.archlinux.org/index.php/ATI_Catalyst

Dual-head on NVIDIA

Hello, I'm trying to configure a dual-head setup (NVIDIA proprietary drivers). I've tried both Xinerama and Twinview, but the screen is always treated as one big virtual screen and window managers spread fullscreen windows over both monitors.
Here's what I've tried (they all resulted in the above):
- # nvidia-xconfig
- These instructions
- # nvidia-xsettings
- These instructions (I might've misunderstood them, they were fairly vague)
In addition, Xinerama seems to disable the randr extension, which makes me unable to use xrandr or arandr, so the preferred option is to use Twinview.
For clearance, when I open arandr, I see one big, wide screen called default. How do I set it up so that it shows 2 different screens?

Separate X sessions on dual screens (both monitors have own x sessions )
no xrandr
only
GUI Nvidia X Server Settings
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 295.40 ([email protected]) Thu Apr 5 22:40:34 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "FUS SL3220W"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "NEC LCD22WV"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
Option "RegistryDwords" "PerfLevelSrc=0x2222"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
Option "RegistryDwords" "PerfLevelSrc=0x2222"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Tested Kde,Xfce,Lxde.Awesome

Bootsplash on a dual-head setup without KMS?

Hello!
I have been wanting to get a bootsplash working on my system, to get a feeling of a more polished system, but sadly I'm running the catalyst drivers for decent 3D game framerate, and it doesn't support KMS. It seemed like that would have been okay, and that for example plymouth could work through a framebuffer, but sadly I have dual-head with two different resolutions(1920x1200 and 1020x1280), and I couldn't get Uvesafb/v86d to work with that. I really want to get a bootsplash and I am willing to sacrafise some time to get it working. The main goal is just to get it working, but ideally I'd like it without any resolution changing or black flicker, as it's described here. So Plymouth is my first-pick, as it looks "best".
So far I have tried Splashy, FBsplash and Plymouth, with different degrees of success:
FBsplash:
Miscsplashutils(dependency) didn't build because freetype had been built without static linking(I don't know anything about this). I got it working with something I found in the comments though.
But then FBsplash wouldn't build. And I gave it up.
Splashy:
Installation worked(splashy-full) after I modified the PKGBUILD with some automake patches so it should work with automake 1.14. But when I booted it the screen was just flickering black
Plymouth:
I got it installing, can't remeber if I needed some patches. And it worked, although only with a text-bootsplash. I also installed a framebuffer(Uvesafb/v86d) but that didn't work properly.
The Plymouth loading anymation(spinfinity) continued into gdm.
I am willing to retry everything and clearify what doesn't work, and why.
Thanks to anyone who can help!
Last edited by totokaka (2013-08-21 16:21:23)

So I've been trying to get some development on this, and used most of the day to get uvesafb working.
It is working quite good, but I don't get the native resolution of the screen(1920x1200), I only get 1600x1200.
And my secound monitor is disabled, I suspect it's because the computer sends a resolution to big to both the screens, but it's really a a feature for me, as the terminal would be sideways on the secound monitor anyways.
During my testing I also came to a new idea: Have the framebuffer, X and GDM originally only start the main monitor, and then leave it up to gnome to enable it. that way I would only get the flicker between GDM and gnome-shell, which I will get anyway, because it seems like everything ignores X's rotation of the screens, or at least doesnt support sideways. However I didn't find a way to get this working, any ideas?
EDIT; My card is an HD6790, and as far as I can understand the GPU's bios is sending supported modes to uvesafb?
Last edited by totokaka (2013-08-22 19:22:52)

Nouveau graphical tearing, dual-head setup

I currently experience tearing while using the Nouveau drivers for my NVidia card. I experienced the same (or a similar) tearing issue while using the proprietary drivers, which, along with the inherent incompatibility with most of the linux graphics stack, led me to switch to Nouveau.
I'm using the 3D support from nouveau-dri along with xf86-video-nouveau and the most recent Gnome 3 build in the official repositories.
I have a dual-head setup with one 1024x768 IBM monitor to the left of a 1920x1080 Dell monitor. Both report 60Hz vertical refresh rate in their configuration menus.
So far, my attempts to solve this problem have consisted of the following steps:
1. Use a minimal xorg.conf and configure everything using the integrated Gnome display settings utility. The minimal xorg.conf was as follows:
Section "Device"
Identifier "nvidia"
Driver "nouveau"
Option "GLXVBlank" "true"
EndSection
2. Enable/disable the GLXVBlank flag in xorg.conf.
I do not experience the same issue when booted to Windows 7, using the most recent official NVidia drivers.
I would greatly appreciate any help anyone could offer on this issue, it is quite frustrating to boot into Windows to watch videos without horizontal breaks in every frame. Thanks!
Output from xrandr --current is as follows:
[ifx@melancholy ~]$ xrandr --current
Screen 0: minimum 320 x 200, current 2944 x 1080, maximum 8192 x 8192
DVI-I-1 connected 1920x1080+1024+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DVI-I-2 connected 1024x768+0+312 (normal left inverted right x axis y axis) 304mm x 228mm
1024x768 60.0*+ 75.1 70.1
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 60.0 59.9
720x400 70.1
My current xorg.conf is as follows:
Section "Monitor"
Identifier "Monitor0"
Option "PreferredMode" "1920x1080_60.00"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "PreferredMode" "1024x768_60.00"
Option "LeftOf" "Monitor0"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nouveau"
Option "Monitor-DVI-I-1" "Monitor0"
Option "Monitor-DVI-I-2" "Monitor1"
Option "GLXVBlank" "true"
EndSection
Section "Screen"
Identifier "Screen0"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 2944 1080
EndSubSection
Device "nvidia"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0"
EndSection
Other information can be provided on request.

Hello. I have the same problem. Not just on Arch. I've had this problem with many distros, graphics cards, and drivers across the board. Installing the proprietary nvidia driver fixes the video tearing (vsync) issue for me. However; A) it's Linux, I don't want to use proprietary anything (otherwise I'd be on a Mac); and B) the proprietary driver will not flip my display to portrait anyway.
I basically have the same setup as Meyermagic. One GeForce 8600 GT, Two monitors (identical acers) 1680x1050 (oriented in portrait so 1050x1680 if you like), using open source Nouveau driver, created a minimal xorg file in /etc/X11/xorg.conf.d/20-nouveau.conf
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Nvidia card"
Driver "nouveau"
Option "GLXVBlank" "true"
EndSection
Both monitors have a refresh rate of 60Hz. I still get really bad tearing as I drag windows across the screens.
Again, I've had this issue with almost every Linux box I've built (the only time this is not even remotely an issue is on my Thinkpad T400 using the Intel graphics). I'm guessing I'm doing something wrong or I've just had bad luck because it is nearly impossible to find any support for this on any forum anywhere. Anything I do find is either a thread like this where someone asked the question and simply never got a response. Or it is some out-of-date forum that give you 10 ways to modify the xorg.conf none of which make any sense or don't work. Not to mention that xorg.conf is now depreciated anyways.
Seriously, even if there is a wiki that concisely explains in excruciating detail how to actually modify the xorg conf files then I could figure it out for myself but I can't find that anywhere which makes me feel really stupid because I know it has to be out there. If there isn't an xorg wiki or xorg.com site or something that explains how to use the thing then I'm not sure I want to live on this planet anymore.
If anyone can help in any way please do.

OpenOffice crash with dual-head presentation in Impress

Hi, I have an issue with Impress, I hoped that version 3.2 would fix it but it's not so. Now I think it is a problem of my system.
I have a dual head setup with an ATI card (Catalyst 10.5, xorg-server 1.7.6); I start a slide show with Impress on the secondary display, then when I press esc to return to Impress the program crashes. Starting it from the console I get this error messages:
$ SAL_SYNCHRONIZE=1 soffice -impress
** (soffice:3129): WARNING **: Inhibit method failed
** (soffice:3129): WARNING **: Inhibit problem : The name org.gnome.ScreenSaver was not provided by any .service files
** (soffice:3129): WARNING **: UnInhibit method failed
** (soffice:3129): WARNING **: Inhibit problem : The name org.gnome.ScreenSaver was not provided by any .service files
X-Error: RenderBadPicture (invalid Picture parameter)
Major opcode: 155
Minor opcode: 7
Resource ID: 0x1800911
Serial No: 40909 (40909)
I think the warnings are harmless, and that X-Error is the problem. I don't know if I should file a bug upstream, I searched OO bug tracker but I didn't find anything.
Thank you.

Hey, I just discovered the same problem here... I believe it's exclusive with oo, and go-oo doesn't have it.
EDIT:
According to this, it has to do with gtk, a possibly workaround (at least for me) is running this first:
export OOO_FORCE_DESKTOP="soffice"
Then openoffice doesn't crash when you close the presentation :). Hope it helps until we find a real solution :).
PS.- The warning still appears though.
Last edited by pablox (2010-06-09 23:13:44)

Kdemod 4.2 and dual head

Similar Messages

Maybe you are looking for