Kdemod 4 and hal permission

Hi,
this error in Dolphin (KDEmod 4.2) see from upgrade to KDE 4.2 and after click to mount disk(all disks).
id = uid=1000(deti) gid=100(users) skupiny=50(games),82(hal),91(video),92(audio),93(optical),95(storage),97(camera),100(users)
add user to group hal not solve this problem.
add user in /etc/dbus-1/system.d/hal.conf not solve
thx for answer and sorry for bad english
Last edited by jjslovak (2009-02-13 07:49:07)

b0uncyfr0 wrote:Hi you should post in the chakra forums...They are the people maintaining it afterall.
http://kdemod.ath.cx/bbs/

Similar Messages

I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission. Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
If there's no change after taking this step, continue.
2. Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Configure security-role and method permission for EJB 3.0 using Jdev 11g

The EJB 3.0 session bean created by Jdev 11g EJB wizard does not have ejb-jar.xml. Where and how can security-role and method permission for the EJB be configured?
For example,
<assembly-descriptor>
<security-role>
<role-name>managers</role-name>
</security-role>
<method-permission>
<role-name>managers</role-name>
<method>
<ejb-name>Employees</ejb-name>
<method-name>setSalary</method-name>
<method-params>
<method-param>java.lang.Long</method-param>
</method-params>
</method>
</method-permission>
</assembly-descriptor>

user516954,
By default annotations are used. However, you can create a new descriptor and that will take presidence over any declared annotation.
--Ric

How to revoke and grant permission in java using Security Manager ??

I like to revoke and grant permission through java code..can anybody give me a sample code.

Discussion is here:
http://forum.java.sun.com/thread.jspa?threadID=731363

I have Kdemod and Gnome but when i am in Gnome i want Nautilus

I have installed kdemod and gnome but when i am in gnome when i go to "Places", all folder are opened with dolphin. But i want to use dolphin when i am in kde4. Is there a way to resolve it?

Yeah I've noticed this aswell, it's not just dolhpin. If you have anyother file manager installed gnome uses that instead. Can't help though sorry.

Dbus and hal groups, the wiki.

Hey,
I was just reading though the beginners wiki and saw about the dbus and hal groups.
Should I add my user account to them? The wiki said about adding a user to the groups via usermod..
usermod -aG audio,video,floppy,lp,optical,network,storage,wheel,dbus,hal USERNAME
But I installed hal via reading our hal wiki and it says..
For dbus and hal to function properly, local user accounts must be members of the following groups: optical, storage. To achieve this, open a terminal and type the following commands as root:
# gpasswd -a username optical
# gpasswd -a username storage
Which I have done but it doesn't mention about the hal and dbus groups, so is just adding my account to optical and storage sufficient?
Or will adding my account to the hal and dbus groups give me any benefit or cause harm ?

Your user doesn't need to be in the hal and dbus groups.
Edit: I fixed the info in the wiki.
Last edited by fwojciec (2008-02-29 21:19:40)

Udev and hal are unstable

udev and hal behave unstable in my laptop.When I boot my computer,it sometimes take lots of time to finish,but sometimes it fast.For example, sometimes in "udev event" stage I wait 10s ,but sometimes I only wait 3s.So it is when load hal.
I also discover my archlinux run faster when it boot quickly then when it boot slowly.
what is the problem?

udev and hal behave unstable in my laptop.When I boot my computer,it sometimes take lots of time to finish,but sometimes it fast.For example, sometimes in "udev event" stage I wait 10s ,but sometimes I only wait 3s.So it is when load hal.
I also discover my archlinux run faster when it boot quickly then when it boot slowly.
what is the problem?

VMware Workstation 7.1, dbus and hal

Older thread on the subject: https://bbs.archlinux.org/viewtopic.php?pid=230142
I'm running VMware Workstation 7.1 in Xfce 4.8, with dbus running and hal not.
I get:
$ vmware
[ snip ]
process 30387: Attempt to remove filter function 0x7f591ecdb320 user data 0xa2b452, but no such filter has been added
If I either stop dbus (which breaks alot of other things), or start hal along with dbus, it works.
dbus hal => VMware works
!dbus !hal => VMware works
dbus !hal => VMware doesn't work (although this is the setup I'd like, dbus without hal).
Any ideas here? I'd really rather not have to start hal.

help

Kdemod and hibernate

I am using kernel26suspend2 with kdemod and hibernate script. The problem i am facing is that when i reboot the sound is not there, after toggling mute off and on on the master volume slider in the mixer window i get the sound back.
I have
RestartServices alsa
in the /etc/hibernate/common.conf but it doesn't help.
One more thing when i click on hibernate in the logout dialog box it lock the screen but doesn't hibernate.:(

Dn't know if this will help, but do you have alsa listed in your daemons in your rc.conf?

How to fixed locked disk and written permission

Who has an idea how to fixed itunes folder locked disk and written permission.

Hi Tony T1
I believe I have the same problem? This external disk I'm locked out from contains my Time Machine backups
At this point, I'm not 100% sure what's going on? - as I've been battling this off/on for a good while!
Besides my flailing, I tried:
accessing as a network disk, using another machine w/ Lion and Mountain Lion, calling Apple's tech support, visiting the local Apple Store, Running Disk Warrior, startup with "option" a few million times. Also startup with /cmd + r/ . Its been so long I can't remember : Oh, login as root didn't get me very far?
I tried the fix you described, and was able to remove the recovery partition from the external USB.
As per Robert's post, since I was still locked, I repartitioned the external HD -- yet the repartitioning failed?
"Couldn't modify partition map because file system verification failed"
(No rush, as I've been getting my ***-kicked since September, but I'd be happy to hear any advice you may be able to impart)
Thank you kindly.
PacoToddPaco

Permit SharePoint group to have contribute access at Folder level only and read permission at library level.

Is it possible to Permit SharePoint group to have contribute access at Folder level only and read permission at library level.
Ashish Baranwal To know what you know and what you do not know, that is true knowledge

Hi Ashish,
You can have special permissions for individual lists or libraries (or folders within a library) what you have to do is to go
to the manage permissions list or document library for the appropriate item or folder and stop inheriting permissions from Parent and then you can add any sorts of permissions you want uniquely to that item or folder.
Check for further reference.
http://social.technet.microsoft.com/wiki/contents/articles/18203.sharepoint-2013-break-document-library-permissions-inheritance.aspx
you have to break the inheriting permission of document library and assign the permission you want again you have to set the same for folder
level.
For your better understaning the concept check here
http://blog.pentalogic.net/2010/11/sharepoint-permissions-what-why-and-how-part-1-basic-principles/
While you probably won't come across this in your case, be careful when breaking security permission inheritance on the items in a a document
library or list. There are big performance hits. If you have inherited permissions on a library or list SharePoint only has to do one permissions check for all the contents. If you have unique permissions SharePoint has to check every document's permissions
before returning the contents of the library. This tends to become an issue when you have thousands of items, rather than
hundreds.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue

[SOLVED]xfce 4.8 and hal

Hey all!
I just recently did a fresh install of Arch Linux on my main desktop, and right now I am currently trying to install xfce 4.8 but I noticed its trying to pull in hal. I thought Xfce migrated off of hal to using GIO/GVFS/Thunar-Volman? I asked in #xfce irc channel and they said that xfce 4.8 doesn't need hal any more. So I am really confused. I was hoping to not needing hal on my system any more lol.
Also, do I still need gamin installed?
Last edited by orlfman (2011-01-20 05:21:53)

anonymous_user wrote:The bug was recently fixed so downloading xfce4 should no longer pull in thunar-vfs.
Ah, ty. I will try pulling in xfce again then :]
EDIT:
Just updated my repositories and its still trying to pull in thunar-vfs and hal :[
Last edited by orlfman (2011-01-20 04:40:52)

AutoMounting / Udev and HAL

Hey fellow Archers,
Sorry if this is a bit of a Noob Question.
But I am having issues with automounting usb drives that etc.
I am running eeepc 1000 and everything works fine out of the box. But I have shown Arch to a friend of mine and we can't gain access to the usb drive with free.desktop permission error. I have read the wiki and forum posts. However I have found the are for much older versions of HAL and Udev, and they are contradictory.
Please if you could help me clarfiy a solutions. Should Udev handle to mounting and permission rule or should I add HAL policy ?.
If HAL if the best solution could be so kind as to provide a example of Hal policy as my previous attempt to edited HAL has failed.
Kind Regards
Mac Tzu

Mac Tzu wrote:
Great thanks SpeedVin
Could you Show me w copy of your Hal polcy?
No problem
1 <!DOCTYPE busconfig PUBLIC
2 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
3 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
4 <busconfig>
5
6 
8
9 
10 <policy user="hal">
11 <allow own="org.freedesktop.Hal"/>
12 </policy>
13 <policy user="root">
14 <allow own="org.freedesktop.Hal"/>
15 </policy>
16
17 
18 <policy context="default">
19 <allow send_destination="org.freedesktop.Hal"
20 send_interface="org.freedesktop.DBus.Introspectable"/>
21 <allow send_destination="org.freedesktop.Hal"
22 send_interface="org.freedesktop.DBus.Properties" />
23
24 <allow send_destination="org.freedesktop.Hal"
25 send_interface="org.freedesktop.Hal.Device"/>
26 <allow send_destination="org.freedesktop.Hal"
27 send_interface="org.freedesktop.Hal.Manager"/>
28
29 <allow send_destination="org.freedesktop.Hal"
30 send_interface="org.freedesktop.Hal.Device.CPUFreq"/>
31 <allow send_destination="org.freedesktop.Hal"
32 send_interface="org.freedesktop.Hal.Device.DockStation"/>
33 <allow send_destination="org.freedesktop.Hal"
34 send_interface="org.freedesktop.Hal.Device.KillSwitch"/>
35 <allow send_destination="org.freedesktop.Hal"
36 send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/>
37 <allow send_destination="org.freedesktop.Hal"
38 send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
39 <allow send_destination="org.freedesktop.Hal"
40 send_interface="org.freedesktop.Hal.Device.Leds"/>
41 <allow send_destination="org.freedesktop.Hal"
42 send_interface="org.freedesktop.Hal.Device.LightSensor"/>
43 <allow send_destination="org.freedesktop.Hal"
44 send_interface="org.freedesktop.Hal.Device.Storage"/>
45 <allow send_destination="org.freedesktop.Hal"
46 send_interface="org.freedesktop.Hal.Device.Storage.Removable"/>
47 <allow send_destination="org.freedesktop.Hal"
48 send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
49 <allow send_destination="org.freedesktop.Hal"
50 send_interface="org.freedesktop.Hal.Device.Volume"/>
51 <allow send_destination="org.freedesktop.Hal"
52 send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
53 <allow send_destination="org.freedesktop.Hal"
54 send_interface="org.freedesktop.Hal.Device.WakeOnLan"/>
55
56 </policy>
57
58 </busconfig>
59
Nuber's are from Vim

Permission Errors: Mtn Lion upgrade from SL iphoto, iTunes, etc; want to save myself and reinstall, Permission Errors: Mtn Lion upgrade from SL iphoto, iTunes, etc; want to save myself and reinstall

Well here I am again, once again lots of problems with t he upgrade to ML from SL on my late 2009 iMac.
Background: I took my perfectly fine functioning iMac into the Apple Store to have the Seagate HD replaced pert the recall. BIG MISTAKE. The Geniuses gave me a "complimentary" upgrade to ML without asking if that was okay, and three months later, I still do not have a functioning iMac.
My iMac since this reintallation has been unable to open ANY iphoto files/photos saved whie I was still running SL--pretty much everything I've saved as a jpeg for the last six years, so I'm not willing to let this go so easily. Not only have I got work-related files on here that I need, all of my children's and family photos are saved on there. I need those files.
After trying to no avail to reinstall SL from disk, the Apple Tech from Apple Care said that I've got hardware problems (fans wont' stop running; SL disk cannot be read by either Super Drive--the one inside the iMac or the external portable Super Drive, hence reinstallation of SL has not been possible), so I'm supposed to take it BACK into the Apple Store and let them work on it again. Please understand that for the last three months I have been dealing with nonstop issues that have created a real mess of my life and nothing gets fixed, no matter how many phone calls I make. I do not think any of this is hardware-related, honestly. I've found numerous threads on the fan running constantly with the installation of ML; and no, I'm not even running any CPU-instensive programs. And nothing explains why when the SL disk (a second copy of which was mailed to me) cannot be opened (the progress wheel just keeps spinning and spinning).
Well, I've decided that I'm probably going to have to give up on this, and that my previously working iMac that should have had more life in it is destined for the landfill (or recycling). All I want now is to get my data off of it and be able to use it with my external hard drive with another Mac (MBA now running Lion--although it's also got lots of problems) and a new Windows machines which I will mostly likely be buying this week. I can no longer live with the interruptions to my life--I work with my computers, need my data, and this has been going for three months.
I read a bunch of really complicated information on how to get my old data off of my Mac and/or external hard drive, and I've accepted that this is going to take a LOT of time, but I do't have a choice if I want my data.
I'm now looking at the contents of my external hard drive, and looking specifically at one of the user accounts (one that I use for work purposes) and I see that I am not allowed to view the contents of the "Pictures" because I do not have permission. This has been an ongoing issue while using the MBA to TRY to view/access data from the iMac. Is there anyone who can help me figure out how to repair all of these permission errors?
I've lost an unbelievable amount of time with all of this and I only want MY OWN files. I'm not trying to pirate any software, I just want and need my own iPhoto images and of course, since I own the music in my iTunes library, I think I ought to have permission to take this data off of this external hard drive and put it onto another external hard drive that I will buy tomorrow, so that I can reinstall onto another machine (ie, probably a new WIndows computer).
To paraphrase:
Upgrade to ML made most of my files saved on my iMac with SL obsolete or not viewable or accessbile. I NEED these files (mostly jpegs, iTunes music, some pages docs, etc, but I'll live without those docs if need be).
I have the last backup that was done before taking the iMac in to have the hard drive replaced. I can see that the data is there, but in one of the user accounts, the one I use mostly for work related purposes, the error message that tells me I cannot view the files because I do not have permission comes up. I've never had any other admins of my computers, either the iMac or the MBA that I am trying to use to open the files on the external hard drive. How would I repair the permissions on a backup of my old SL system from a MBA running Lion?
Anyone? Please help. I'm going to lose a whole heck of a lot of data and money if I cannot get these saved files back.

Well here I am again, once again lots of problems with t he upgrade to ML from SL on my late 2009 iMac.
Background: I took my perfectly fine functioning iMac into the Apple Store to have the Seagate HD replaced pert the recall. BIG MISTAKE. The Geniuses gave me a "complimentary" upgrade to ML without asking if that was okay, and three months later, I still do not have a functioning iMac.
My iMac since this reintallation has been unable to open ANY iphoto files/photos saved whie I was still running SL--pretty much everything I've saved as a jpeg for the last six years, so I'm not willing to let this go so easily. Not only have I got work-related files on here that I need, all of my children's and family photos are saved on there. I need those files.
After trying to no avail to reinstall SL from disk, the Apple Tech from Apple Care said that I've got hardware problems (fans wont' stop running; SL disk cannot be read by either Super Drive--the one inside the iMac or the external portable Super Drive, hence reinstallation of SL has not been possible), so I'm supposed to take it BACK into the Apple Store and let them work on it again. Please understand that for the last three months I have been dealing with nonstop issues that have created a real mess of my life and nothing gets fixed, no matter how many phone calls I make. I do not think any of this is hardware-related, honestly. I've found numerous threads on the fan running constantly with the installation of ML; and no, I'm not even running any CPU-instensive programs. And nothing explains why when the SL disk (a second copy of which was mailed to me) cannot be opened (the progress wheel just keeps spinning and spinning).
Well, I've decided that I'm probably going to have to give up on this, and that my previously working iMac that should have had more life in it is destined for the landfill (or recycling). All I want now is to get my data off of it and be able to use it with my external hard drive with another Mac (MBA now running Lion--although it's also got lots of problems) and a new Windows machines which I will mostly likely be buying this week. I can no longer live with the interruptions to my life--I work with my computers, need my data, and this has been going for three months.
I read a bunch of really complicated information on how to get my old data off of my Mac and/or external hard drive, and I've accepted that this is going to take a LOT of time, but I do't have a choice if I want my data.
I'm now looking at the contents of my external hard drive, and looking specifically at one of the user accounts (one that I use for work purposes) and I see that I am not allowed to view the contents of the "Pictures" because I do not have permission. This has been an ongoing issue while using the MBA to TRY to view/access data from the iMac. Is there anyone who can help me figure out how to repair all of these permission errors?
I've lost an unbelievable amount of time with all of this and I only want MY OWN files. I'm not trying to pirate any software, I just want and need my own iPhoto images and of course, since I own the music in my iTunes library, I think I ought to have permission to take this data off of this external hard drive and put it onto another external hard drive that I will buy tomorrow, so that I can reinstall onto another machine (ie, probably a new WIndows computer).
To paraphrase:
Upgrade to ML made most of my files saved on my iMac with SL obsolete or not viewable or accessbile. I NEED these files (mostly jpegs, iTunes music, some pages docs, etc, but I'll live without those docs if need be).
I have the last backup that was done before taking the iMac in to have the hard drive replaced. I can see that the data is there, but in one of the user accounts, the one I use mostly for work related purposes, the error message that tells me I cannot view the files because I do not have permission comes up. I've never had any other admins of my computers, either the iMac or the MBA that I am trying to use to open the files on the external hard drive. How would I repair the permissions on a backup of my old SL system from a MBA running Lion?
Anyone? Please help. I'm going to lose a whole heck of a lot of data and money if I cannot get these saved files back.

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Kdemod 4 and hal permission

Similar Messages

Maybe you are looking for