KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode
KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode I got this today today and when i tried to complete initial set-up. it never completed. TV is going in cycles with initial set-up everytime it connects to my internet and says connected successfully. after it tries to update software and tv restartssame initial set-up screen again i tried keypad button on remote and it took me to tv. i was able to see tv that way but whenever i start tv, it goes back into initial set-up again. any solution for this?
Hi GC_Sugarland,
Thank you for considering Sony Community!
I'm sorry to hear that this happens to your TV after the update. Pleas reset your the TV to the original setting. click on this link to guide you on how to reset it.
I hope this helps. Please keep me posted.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"
Similar Messages
-
When I upgraded to beta Version 4.12 (?) the latest available anyway. At first the bookmarks tab would not work; nothing happened when I clicked on it. So could not access bookmarks and could not create new ones.
This seemed to correct itself yesterday; but now have lost all my bookmarks in total. It gives me the option to recover them; but when I try Firefox locks up; mouse turns to circulating circle and message at top of browser is 'not responding'.
This also causes memory resources to 'red line' and makes computer unusable.
CPU resources seem not to be affected.
I am using the 'SAM Find' add on tool bar; it was swamped with links to bookmarks I have never used when I upgraded. They have now been deleted and my tool bar seems to work as it was before I upgraded
I have two computers - Laptop (the focus of this Question) and a Desktop; both configured the same way. I upgraded the desktop to the beta when it was first available; it provides no upgrade path to the latest version without me physically downloading and installing the latest version. That I did yesterday.
Having done that I now have addon's on my laptop like InboxQ that work fine; but on desk top get message 'this version of Firefox does not support...'
While I am aware and understand this is a beta version I a discovering a number of inconsistencies in what I can do one one computer that I am unable on the other, even though I am running the same versions of the beta. To my knowledge both are setup the same and both running in the same environments.
I have to say I am less than happy not being able to access my book marks.This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
You should avoid using the same Firefox profile with different Firefox versions.<br />
If you currently do then create a new profile exclusively for the Firefox 4 version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox -
I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?
Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore. -
I purchased the newest software update for my ipod touch 1st generation and it is saying it is it will now begin download but the status bar doesn't even appear? How can I start the download?
Well first off you shouldn't have had to pay for a download (just an assumption from the word "purchased".
If you are trying to install iOS 5 on your iPod touch, it won't work they arent compatible. I suggest checking what version of software you are trying to install and posting it in this forum so people can have a better understanding. -
After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?
Hard drive sensor or logic board failure.
Try a SMC Reset, only thing I can help.
http://support.apple.com/kb/ht3964
Check your tones with this sounds like it's not recognizing the RAM, perhaps it's not seated well or making a bad connection or it's defective.
http://support.apple.com/kb/ht1547
Take it back. three times a charm -
Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.
-
I have completed a software update as prompted. However, all "Pages" and "Numbers" files are completely blank. Please advise
Hi... Sorry for delay. I've been away working.
I have just completed another software update as prompted again, and I'm still having problems.
Nearly all my software won't open. It doesn't matter if it's relatively old software I brought over from my last Mac or new software I've purchased from the App store within the last year or two. It always says whatever software I'm trying to open has "quit unexpectedly"
My Mail, App store, Stickies and Safari seem to work, but most other things won't.
I've run a verify disk permissions and a repair disk permissions, but this message appears... Maybe it is a clue to the problem if you understand these things:
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
Please advise...
Best wishes
Anton -
HT4623 Why can't I find the Software Update button? I only see About and Usage.
Why can't I find the Software Update button? I only see About and Usage.
Under About, what version do you have? The Software Update option in Settings was not introduced until iOS 5.0.
-
I have no sound in my computer, only with headphones, i tried the software update but it still doesn't work, and i have a red light on in my computer. How to resolve that ?
Plug and unlpug the headphone jack with some intention to get the mechanical switch to flip.
You can google for more intrusive methods.
ex. Read through all the many approachs: http://www.ifixit.com/Answers/View/8797/Audio+jack+problem,+no+speaker+sound,+re d+light -
software update is not in my general settings and i am still on the same iPhone 4 settings?
Read the article below.
http://support.apple.com/kb/HT4972 -
I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
was downloading the new software update on my iPhone when it froze and has been in that state for more then 15 hours.
tried turning it off didn't work. tried pressing buttons didn't work.
tried unplugging it and waiting for the power to die hasn't worked
tried the steps on the webiste but they didn't work
tried working it from the laptop doesn't connect because i can't put in the passcode.
also tried calling iTunes support but due to the holiday no one is answering
what can i do i need my phone!!!
thanksi was able to access the phone by pressing down on the off button and home at the same time
-
Software update won't open, or App Store, and Mail won't let me select messages.
Hello,
Moutain Lion is playing up on my machine. Software update won't open, or App Store, and Mail won't let me select messages. Everything else takes at least 20 seconds to open fully.
Any ideas on what to do here?
Cheers,
George
Spec:
Processor 3.4 GHz Intel Core i7
Memory 12 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 2048 MB
Serial Number DGKGG1HTDHJW
Software OS X 10.9 (13A603)Okay no worries, can't find where to delete this post...
-
I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes. Any help is greatly appreciated
Your iPhone was hacked at a "small phone unlocking shop "
Only the carrier who locked the iPhone from new can unlock it no-one else
Anything else is hacking which forfeits any help from Apple and this forum
I also doubt that Orange will touch it
For an understanding what hacking does see here
http://support.apple.com/kb/HT3743..
Since all the UK carriers ( I assume you are in the UK )
offer unlocking you have trashed a perfectly good iPhone -
Hi Guys 'n' Gals!
I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
Any ideas guys?
Miffa!Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Maybe you are looking for
-
My Macbook Pro Keeps Restarting on its Own
Here is a copy of the kennel report: Anonymous UUID: FF9A9950-66ED-6C81-EAD0-391756B500A6 Tue Sep 23 10:09:44 2014 panic(cpu 0 caller 0xffffff7f8448afb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff
-
How to display aux bus and Output 1-2 as tracks in arrange?
Sorry for the silly question but I would like to display the auxiliary busses and Out 1-2 as "tracks" in the Arrange view. They show in the Mixer as channel strips and, of course, they're in the Arrange Inspector but I would like to be able to see al
-
I intend to create a video podcast (1 or 2, 15-minutes episodes/month). My shortlist for the hosting service is: www.Podbean.com www.Libsyn.com and www.typepad.com Any positive/negative experiences with any of the three mentioned above? Thanks.
-
1. Can I use JDeveloper 10g on 9i DB? 2. Can I install SRDEMO schema for the tutorial on 9i DB? Thank you in advance. Jimmy
-
Dear All, I had a query regarding the calender date in sales order, i want to map, in such way that the sales order should be created for a predefined date, for Example : The sales order should be created on 6th, 18th , & 25th for the March mont