KE 30 Profitability Report not picking cost of raw, packing and overheads

We are facing some problem in KE 30 report (profitability report). Cost of some sales orders are not appearing in profitability report and it shows 100% GP for that sales order. If any one knows the reason please let me know.

Hi
Check if you have assigned any Costing Key in KE4J or KEPC
Also check if Std cost is released or not..
br, Ajay M

Similar Messages

My iPhone 5 will only connect and keep connected if I am about 5feet away from my router. It also will not pick up other wifi sources and will drop Bluetooth. What can I do to solve this problem?

My iPhone 5 will only connect and keep connected if I am about 5feet away from my router. It also will not pick up other wifi sources and will drop Bluetooth. What can I do to solve this problem?

Are there any other wireless devices that might cause interference?
Also are there any nearby Wi-Fi networks that might have the same name as yours? It amazing how many Linksys Wi-Fi networks are out there.

Report not picking value for segment reporting

Hello,
The PA report is not picking up the carry forward value. I have checked the following.
1)in FS10N balance carry fwd has been done.
2)2keh Profit center carry fwd actual balance has been performed
3)KE5Z Chk a/c wise transaction, it is showing that PA documents exist
The program was developend last year December and it had picked the correct value for the same (cumulative value).
Kindly let me know what could be the possible reason. Any pointer for the same will be highly appreciated.
Thanks & Regards
Jyoti

self answerd

Report not picking the template

Hi all,
I built and registered a rtf template to an Oracle Report(print purchase orders), which is typically run
while approving a PO by selecting the check box (PRINT) in the Approve Documents Form. But Its not picking the
template instead it prints the XML Data. Do I need to call the template through the report trigger.
In other words, How to apply rtf template for the cocurrent report w/ short name, POXPPO? Please Help.
Thanks,
kalyan.
Edited by: kwin on May 21, 2010 6:22 AM

Hi
We had similar issue while submitting BI Publisher report from Shipping transaction form though report is associated with template and data defintion.
To fix we need to another setup through responsibility System Administration > Concurrent Programs > Define query for concurrent program choose update and go to onsite setting tab, In template choose template in LOV after it worked with out any issues. Try similary for this issue it might work. If this doesn't work create forms personalization on approving PO call that step where you can call plsql program, in plsql program you can call template use standard API's before submitting concurrent program
Let me know if this as worked
Thanks
Kamalakar.G

'Move order pick slip report' Report not picking XML publisher Template.

Hi,
SUB: i have to create one XML report on .RDF(move order pick slip report).
Submitting procedure move order pick slip report : i have created one Discrete Job and released that Job, then Component pick release for that particular job. then move order number will generates. then automatically fires the 'Move Order Pick Slip' Report.
NOTE: what i meant to say is i am not submitting the report from SRS window. it will fires automatically when Component pick release.
For this i have taken .xml and generated .rtf according to my layout and i have registered with XML publisher also.it is correct . But while running the report i am geting output as XML codes not in template(wht i have .rtf) format.
if i have to see the output in template from. (i have taken in conc program output as XML also) still same problem.
please help me if anybody having solutions.
Thanks
Valli

Hi Valli,
1:The first thing i would suggest that please check the BI Publisher version you are using (on apps/and on template builder also).
2: In any case if your report is not picking up the template and generating the xml output , i suggest you to attach one program "XML Report Publisher" in your SRS.
Oncwe you run your report and its generate the xml output. you have to take the request id & from view ---> submit request--->XML Report Publisher. run this request again.
it will ask for the request id , select the appropriate request id and it will generate the pdf output as per your requirement.
But this is temporary solution , i strongly recommend you to check the updated version of BI Publisher and instaal it on your oracle apps instance. also use the updated version of bi publisher for Layout(Template Builder).
Regards
SRatnesh

Liquidity Report not picking up Noted item and Sales orders

Hi Experts,
I created planning levels from source as PSK, yet the liquidity is not picking up these items from sales orders and purchase orders. Also while creating noted items, i have given planning levels in the configurarion and the same is not picking up in the liquidity too
Please advice
Thanks in Advance

Hi Hien,
We have created planning levels separately for MM and SD and we have created under SDF and MMF respectively.
IT is working for group created for direct FI entrly and linked the same with PSK and the same is working fine.
I am new to FSCM. Can you please elaborate FDFD?
Thanks and Regards

Report not picking correct data

Is it possible for vendor aging report to dispaly for Particular Vendor the
amount ( bsik-dmbtr ) using Purchase organization field.
There are two Purchase Organizations C100 ( for CPU ) and D100 ( for Monitor ) in my case.
data is picked from bsik , lfm1 ,lfa1 tables.
Example : if D100 is for Monitor-screen and has amount 1000.
c100 is for CPU and has amount 2000.
In that case report with Vendor , comp code, Pur. Orga and period should disply
c100 amount 2000.
D100 amount 1000.
my report is showing that vendor is existing for C100 or D100.
but for vendor that exist in both C100 and D100. ( Say vendor number 200 )
the amount is coming for vendor number 200 in c100 and d100 equal to 1000.
but it should come c100 = 2000
and for d100 = 1000.

hi
I am not sure about this point in vendor aging report. i have added a pur Organization field in this report.
I am asking
If vendor no 123 is in D100 and C100 ( D100 and C100 are Pur Organizations )
Initially no transaction is there.
Suppose vendor no 123 created a Puchase Order of 500 /- using D100 Purchase Organization in duration 01.01.2008
to 01.01.2009
But vendor no 123 in Purchase Organization C100 has no transaction.
Then 123 with D100 is sould show 500/-
and 123 with C100 is 0 /-.
output of this report should show above results ?
If output is like this then how to rectify my report ?
Or it shoud show the result like this
Then 123 with D100 is sould show 500/-
and 123 with C100 is 500 /-
My output is showing like above same
Thanks

Aging report not picking write data

Hi,
My requirement is for vendor 122 within certain period for certain ekorg-c100
and D100 show different amount.
is it possible for vendor aging report.
I developed a vendor aging report for displaying comp-code, vendor, Pur-org,
Total-amount, month wise amount picking from bsik-dmbtr.
I added a field EKORG ( Pur Org ) from lfm1 table with D100 and C100.
And total amount for vendor 122 for a period from 01.01.2009 to 09.09.2009 is 5000/- Rs.
when a new P.O. is crated using Ekorg C100 of amount 2000/-.
My problem is :
After execution of report for same vendor 122 with ekorg c100.
Then it shouid show 7000/- Rs.
And After execution of report for same vendor 122 with ekorg D100.
Then it shouid show 5000/- Rs.
My report is showing same amount in both d100 and c100.
My report is showing same amount 7000/- in D100 and C100 for vendor 122.
Amount picking Bsik table has not ekorg field.
Please let me know how can i do that ?

Thanks for replying. I am sending more info regarding my object.
My requirement is for vendor 122 within certain period for certain ekorg-c100
and D100 show different amount.
is it possible for vendor aging report to show purchase organization wise amount for particular vendor and amount ?
tables , lfa1, lfm1, bsik.
I developed a vendor aging report for displaying comp-code, vendor, Pur-org,
Total-amount, month wise amount picking from bsik-dmbtr.
I added a field EKORG ( Pur Org ) from lfm1 table with D100 and C100.
Report is working fine for displaying Purchase organization.
And total amount for vendor 122 for a period from 01.01.2009 to 09.09.2009 is 5000/- Rs.
when a new P.O. is crated using Ekorg C100 of amount 2000/-.
My problem is :
After execution of report for same vendor 122 with ekorg c100.
Then it shouid show 7000/- Rs.
And After execution of report for same vendor 122 with ekorg D100.
Then it shouid show 5000/- Rs.
My report is showing same amount in both d100 and c100.
My report is showing same amount 7000/- in D100 and C100 for vendor 122.
Amount picking Bsik table has not ekorg field.
Please let me know how can i do that ?

"Cost Rollup - No Report" not updating costs for some items.

Hi ,
We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
"Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
Thanks in advance,
Pavan.

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

SD delivary report not pick up data from ship-to-party

Hi ABAPER,
I have a report which is pick up data from likp, lips,kna1.But when ever i execute this program it will display report.But in my report the ship-to-party and sold-to-party data will not display in my report. This report is open delivary report. Any one can give me solution.
Thanks in advance.
Regards,
Sourav

Hi Saurav,
from delivery select sales order
***Ship-to-party
SELECT SINGLE kunnr FROM vbpa INTO itab-kunnr1
                                   WHERE vbeln = sale order
                                     AND   posnr = order item
                                    AND   parvw = 'WE'.
***Bill-to-party
SELECT SINGLE kunnr FROM vbpa INTO itab-kunnr2
                                   WHERE vbeln = sale order
                                     AND   posnr = order item
                                    AND   parvw = 'RE'.
Regards
Srimanta

Standard report for the cost of raw materail in production of finished good

Is there any standard report for calculation of raw material cost from the production order of finished goods.?
plz help in this issue.
Thanks.

closed

Payment advices not picking accounting clerk phone number and fax number.

Hi,
We have executed payment program and payment advices got generated. But in the output it is printing everthing i.e accounting clerk name, vendor number and amount. But it is not filling the accounting clerk phone number and fax number even though we have maintained it in our customized transaction code. Will this values in the payment advices will be picked up from standard t.code OB05, there we don't have option to give these two values.
Can anyboday help me on this.
Regards,
Sree

goto accunt groups with screen layout,
after creating the group or existing group, double click on account management, in payment transactions make the required fields are required.
regards,

Iphone 5s not picking up home Wi-Fi and/or very poor signals even in downtown area

Switched to Verizon and bought IPhone 5s less than 3 weeks ago. It was fine the first week then suddenly it won't recognized my home wi-fi and got very poor wireless signal. I have my old IPhone 4s and it works fine like a charm for wi-fi. It keeps reloading and not pop up any wi-fi signals. I went to the mall and normally it should pop up multiple wi-fis but it didn't. However my ipad did. I keep trying to reboot it or even reset it to factory settings and still doesn't work. Then yesterday my calls keep dropping in the middle of business conversation. This is unacceptable and no one seems to be helpful at Verizon. I even took screen pictures throughout the day yesterday to show when suddenly my home wi-fi popped up and a minute later it disappear. This also a domino effect for my photo stream, icloud back up, and most importantly my data plan. Now I can't even use my paid home wi-fi and use up all my data plan with Verizon and none of them care. I almost feel like switching to other providers. I also see that this is somewhat common to IPhone 5s with their troubled software or signal chip but not getting help from Verizon is the worst.

I downloaded the Speedtest app on my iPhone and iPad and would randomly test one right after the other. I accumulated about 5 tests a day on each device over the course of 3 days. I set up an appointment at the Genius bar. I told the Genius that I set up my phone as new and then showed him my comparisons of the Speedtest on both devices. He handed me a new (non-refurbished because it hasn't been out for long) phone, no questions. Apparently it was a hardware issue and not an iOS 8 bug.

Report Cost of Operation Activity and Component

Hi Gurus,
Is there report to list cost of Operation Activity and Component in the same report (not in separate) ?
In our environment "operation activity" show Labor Cost and "Component" show material cost. If one by one of document we can see it in each document. The requirement is to see in a list of documents that contain labor dan material cost in the same report.
When use IW49N, only show cost of "operation activity" not include cost of material used.
Regards,
Tri W

duplicate.closed.

MM: PO Not Picking up PR Having Multiple Line Items

Hi All,
When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we have to select input tax code.
CASE1: Created PR 760001340 with single line item and also could able to create PO.
Case2: Created PR 760001341 with multiple line items, When creating PO with reference to PR the line items and Vendor are not picking Up.
Plz. Advise a solution.
Thanks in Advance.....
Regards
Sudheer

HI SHWN,
Thanks for prompt response.
ERROR Message: When referencing a requisition, please also enter a requisition item no.
Regards
Sudheer

KE 30 Profitability Report not picking cost of raw, packing and overheads

Similar Messages

Maybe you are looking for