KE15. I want to use field Period without Year.

Hi!
I can't found characteristic Period without Year. I want to use "period" into a layout for sales and profit planning.
How can I do it?
Thanks!

Yes.
The ability to set Auto-Lock to "Never" can be removed by a profile installed on your phone when setting up an Exchange account. That's why you don't have that setting. Nothing you can do about it other than deleting the Exchange account.

Similar Messages

  • I want to use variation funtion without define the characteristic...

    Dear.
    I want to use variation funtion without define the characteristic into general data selection in making report painter.
    Finally hopeful thing is, The extract data which contain that characteristic group should be used in the whole sub-hierarchy
    automatically such as I did that in general data selection.
    For example, supposing the profit center group A is composed like below,
       A
      └─ B
    └─ C
    .....└─ D
    When I make report painter, if the profit center positioned in lead column not general data,
    I can't use variation funtion in profit center. So, I must save extract data each profit center group manually. (A,B,C,D..)
    It is so uncomfortalble.(Guess the profit center group composed over hundreds.)
    You know, the profit center located in general data, I just need to extract data only once in A. Then B,C,D also saved automatically.
    Why can't do this in former case ? If possible, please let me know.

    Replace af with h.
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <%@ page contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <f:view>
    <h:messages id="m1"/>
    <h:form id="f1">
    <h:outputText value="#{inputValue}" id="ot1"/>
    </h:form>
    </f:view>

  • How to make Field "Period/Fiscal Year" dynamic in the program variant

    HI All,
    We have program called "RCRM_FM_ACL_ACCRUAL_RUN" which is used to calcukate accruals in CRM. This program has got a field "Period/Fiscal Year".
    We want this program to run every day at specific time. So we have created a variant in order to schedule a job with program so that it runs every day and calculates the accrual.
    when we create variant we need to maintain some values in the variant like fund plan id in fund plan id field and period/year in  "Period/Fiscal Year". Normally for date field we have an option to make a field dynamic by selecting value "D" (Dynamic) in selection variable, so it takes date every time as current date automatically and we do not have to change it every day.
    But in program *"RCRM_FM_ACL_ACCRUAL_RUN",* I could not find the option "D" for the field "Period/Fiscal Year". Because of this we have to change the "Period/Fiscal Year" manually every time when ever period/year gets changed. we want this to be done automatically.
    Can any onet tell me why we are not able to find the optin "D" (Dynamic) in the program "RCRM_FM_ACL_ACCRUAL_RUN". Do we need to do any settings for that.
    or
    Is there any other way to full fill my requirement i.e period/year get updated automatically with current period/year every time when period/year gets changed.
    Thanks in advance,
    JM.

    Hi,
    Using function-modules "RS_VARIANT_CONTENTS" and RS_CHANGE_CREATED_VARIANT and table tvarvc, you can make your variant dynamic. You just need to write a small piece of code using these FMs.

  • Query using field MWSKZ without using BSEG

    Hi,
    I'm trying to create an Infoset (t-code SQ02) that will contain the field MWSKZ (Tax on sales/purchases code).
    This field is located in the table BSEG and I get the message: «Table BSEG cannot be used in a join» when I try to create an infoset using BSEG.
    Is MWSKZ (Tax on sales/purchases code) located in any other table?
    Thanks,
    Julien

    BSIK, BSAK, BSID, BSAD.
    But I'm not sure how useful these tables will be in a JOIN.
    Rob
    Edited by: Rob Burbank on Apr 23, 2009 2:53 PM

  • Using Apple TV without iTunes/MacBookPro off

    See various posts along these lines, but nothing that seems to answer my question. I want to use my ATV without the need for having my notebook open. I see posts regarding hard sync but search for that topic and see nothing. All I want to do is to have my content available without the need for my Notebook open. Hints?

    The AppleTV 'device' seen in iTunes, is either set up to stream to AppleTV (shared library) or to sync and stream.
    You can only have 1 sync and stream library, that lists media under My Music, My Movies etc. With iTunes off the list of media shown only shows what is synced to AppleTV's hard drive, which may be nothing, some or all of your media depending on how you configured it under the iTunes Devices tab. There are automatic 'iTunes best guess of what you want to sync' and Custom settings. If everything isn't synced then when iTunes is open the list shown also includes stuff available to stream live, but synced and stream entries are merged in the list transparently to the user so it looks like a single list.
    If you set iTunes up to stream only the content will be selectable under My Shared Music etc option only and you can't sync.
    Only the sync library can accept reverse syncs of stuff purchased on AppleTV.
    Changing the sync library erases media on AppleTV to give a 'clean slate'.
    If you got to Settings>Computers on AppleTV then the top entry in the list is usually the sync library.
    In iTunes Devices>AppleTV if you only have 2 tabs> Summary and Photos, you are set for streaming only. A sync libarry has several tabs for each media type to configure what syncs.

  • How to use field 'HIER_ID' to determine price in S/O?

    I want to use field 'HIER_ID'(hierarchy) to determine price in S/O but I don't know what value I should maintain in pricing master data.
    It should be 'HIER_ID' = 01 or 02 or 10 or else?????
    I don't know.

    HI,
      U have to create a new condition table in the tcone V/03, there u can take the required field . then assign it to ur acess sequence.
    now maintain condition record for that.
    u wl get the price in s/o
    cheers

  • How to use field "responsible Cost center" in Report Painter

    Hi
    I create report painter by using standard LIbrary and want to use field "Responsible Cost Center" as a parameter in order to display report in hierachy.But the standard Library  "6O1"  doesn't provide  this field .
    So I try to create new library by copy the standard  "6O1" and using  the structure "CCSS".But it doesn't show this "Responsible Cost Center" Field as a parameter .
    Please give me an advice step by step the way to get this field as parameter in report painter 
    regards
    Chompleon

    Hi,
    I have a similar requirement. I have followed OSS note 358251 as an example to add the 'Responsible Cost Center', however it doesn't display in the report even after I choose the field for display. The steps I have followed are -
    1) Added the field ZZ_KOSTV in the include structure CI_CC1S.
    2) Using transaction GRCT, table CCSS, I added a characteristic KOSTV with Def field OBJNR, and filler routinue EZZ_FILL_KOSTV.  I then wrote code in this routinue to populate the value KOSTV from AUFK table in the include program FK21REZZ. In debug mode, I can see correct values are populated in this field.
    3) I created a copy of an existing report in the library 6O1, changed it and in the Total line, added the field Responsible Cost Center to the Selected Characteristics. When I save, regenerate and execute the report, the value for  Responsible Cost Center doesn't get displayed though the displayed orders have a value populated in this field and when I debug I can see the value is passed ut correctly form the filler routinue to the field KOSTV.
    Please help and let me know what I need to do to be able to see this field in the output result.
    Regards,
    Neha

  • I need a help to use InDesign CS5 without problems every 30 days.

    30 days is the time limit that i have to use InDesign CS5, i want to use that forever without pay for, it's possible? Please help me.

    Has to be.
    And we don't help people who want to use programs without paying when the trial is over.

  • Can I use PA period date for Project Functional currency exchange rate instead of EI Date?

    Hi,
    We are planning to enable project currency for our projects. However while testing we have encountered one challange. We want to use PA date for all our currency conversions. However Oracle uses EI date to convert project functional currency transactions.
    Does anybody know any setup or solution to convert all expenditure item transactions based upon PA date instead of EI date? Help / Solutiion on this regard is highly appriciated.
    Thanks & Regards,

    Hi,
    Do u mean you have already done your Trx in EI Date and now u want to use PA Period Ending Date?
    Please Correct me if i'm wrong, u want to update all the Trx from EI Date to PA Period Ending Date?
    If you update from EI Date to PA Period Ending Date, this will only be applicable to Future Trx's not for the one's already incurred.
    Regards
    Ragahavender K

  • Can I use field symbol in AT events? How?

    Hi all,
    I want to use field symbol in <b>AT END OF</b> event
    Can I use field symbol in such event as it takes table fields only.
    Kinldy look in to pseudo:
    Loop itab.
             AT END OF <FS1>.
             ENDAT.
    Endloop.
    I tried in my program but it's giving me a short dump.
    If it is possible to use field symbol in AT events, kindly tell me how..??
    Thanks in Advance.
    Sagar

    Hi,
    i don't know your reqirement but it is possible:
    DATA: t1(4), t2 TYPE i.
    FIELD-GROUPS: header.
    INSERT t2 t1 INTO header.
    t1 ='AABB'. t2 = 1. EXTRACT header.
    t1 ='BBCC'. t2 = 2. EXTRACT header.
    t1 ='AAAA'. t2 = 2. EXTRACT header.
    t1 ='AABB'. t2 = 1. EXTRACT header.
    t1 ='BBBB'. t2 = 2. EXTRACT header.
    t1 ='BBCC'. t2 = 2. EXTRACT header.
    t1 ='AAAA'. t2 = 1. EXTRACT header.
    t1 ='BBBB'. t2 = 1. EXTRACT header.
    t1 ='AAAA'. t2 = 3. EXTRACT header.
    t1 ='AABB'. t2 = 1. EXTRACT header.
    SORT BY t1 t2.
    *Here begins the definition of the field symbols
    FIELD-SYMBOLS:
    <t1> TYPE ANY,
    <t2> TYPE ANY.
    ASSIGN t1 TO <t1>.
    ASSIGN t2 TO <t2>.</b>
    LOOP.
      AT FIRST.
        WRITE 'Start of LOOP'.
        ULINE.
      ENDAT.
      AT NEW <t1>.
        WRITE / '   New T1:'.
      ENDAT.
      AT NEW <t2>.
        WRITE / '   New T2:'.
      ENDAT.
      WRITE: /14 t1, t2.
      AT END OF <t2>.
        WRITE / 'End of T2'.
      ENDAT.
      AT END OF <t1>.
        WRITE / 'End of T1'.
      ENDAT.
      AT LAST.
        ULINE.
      ENDAT.
    ENDLOOP.
    Regards,
    Gianpietro

  • Using field symbols in OOPs programming...have ur points.

    Hi all,
    I want to use field symbols in OOPS programming like this...
    But the system is giving me dump....help me.
    START-OF-SELECTION.
    CREATE OBJECT OBJ.
    FIELD-SYMBOLS : <AB> TYPE ANY.
    ASSIGN OBJ TO <AB>.
    CALL METHOD <AB>->add
      EXPORTING
        a      = 4
        b      = 6
      changing
        c      = Z
    WRITE : / Z.

    check the code below
    TYPES: BEGIN OF t_struct,
             col1 TYPE i,
             col2 TYPE i,
           END OF t_struct.
    DATA: dref1 TYPE REF TO data,
          dref2 TYPE REF TO data.
    FIELD-SYMBOLS: <fs1> TYPE t_struct,
                   <fs2> TYPE i.
    CREATE DATA dref1 TYPE t_struct.
    ASSIGN dref1->* TO <fs1>.
    <fs1>-col1 = 1.
    <fs1>-col2 = 2.
    dref2 = dref1.
    ASSIGN dref2->* TO <fs2> CASTING.
    WRITE / <fs2>.
    GET REFERENCE OF <fs1>-col2 INTO dref2.
    ASSIGN dref2->* TO <fs2>.
    WRITE / <fs2>.
    reward points if helpful.........

  • HT4995 Internationally using Location Services without having data charges.  What settings should use on my iPhone 5?

    I'm traveling to Europe and I want to use Location Services without having data charges.  What settings should use on my iPhone 5?  I want to be able to use Trip Advisor City Guides Application to tour around cities for free.  I have a Verizon International Plan for my trip, but it is still pricey.  I would like to keep my iPhone cell services on for incoming calls, but I want to prevent international data charges.  Thanks for your help!

    You don't "choose" to use th 3g network.
    If you have paid for it in your plan and 3g coverage is available, your phone will automatically use it when necessary.
    3g provides faster internet speeds than 2g, so you can watch video or download stuff faster. Wifi is normally faster than 3g.
    Your iphone gps is "assisted", meaning it uses network data to calculate your position.
    Also, you would still need the network to download maps, directions etc as they are not on your device.

  • So I can't use NAV if I want to use Time Machine?

    I just want to make sure I comprehend what I am reading on here and the internet in general: If I want to use Time Machine without lags, I need to disable Norton Auto Protect. So does that mean I can't have virus protection if I have TM in the "ON" setting?

    If you want to use NAV, disable Auto-Protect during the initial Time Machine backup to speed things up for that initial backup. After that, turn Auto Protect back on if you'd like. You can judge for yourself, but I doubt you will notice any significant slowdown compared to when you had Auto-Protect turned on prior to using Time Machine.

  • How to use Field exit

    Hi,
    Our consultant wants to use field exit as a way to validate a certain field in a screen for tcode MB1B.
    I tried to follow the steps below to create a field exit but it seems that I'm missing a step or two because it doesn't work.
    1. Run program RSMODPRF in se38.
    2. Enter the data element and the number of field exit
    3. create and activate the function module
    After this I run tcode MB1B but it seems that it did not pass through the field exit.
    Do I need an extra step to make the field exit work? And how do I assign a field exit to a certain screen?
    Hope to hear from you guys soon.
    Thanks!

    Hi Jackie,
    1.Enter the tcode SE38
    2.In the ABAP Editor enter the program name RSMODPRF
    3.Execute
    4.Then you will get a screen with Data Element and Number of Field Exit
    Here enter the Data Element(for example MATNR for material no.) and
    enter 0 to 9 or A to Z in the second field(I am taking 0 in my example)
    5. Execute
    6.Then you will be navigated to the Function Builder screen(se37) with FM name FIELD_EXIT_MATNR_0
    The FM name contains the Data Element(MATNR) and No. of Field Exit (0) (in this case)
    7.Then click on CREATE.
    8.Give the Fun. Grp name and SAVE
    9.It will take youn to the Source code wherein ypu have to write the code asb per your requirement
    For Example:
    FUNCTION FIELD_EXIT_MATNR.
    IF INPUT BETWEEN 125 AND 150.
    MESSAGE E000(ZMM) WITH "Material not allowed".
    ENDIF.
    ENDFUNCTION.
    10.Then if you try to enter the values in MM01 for Material no.,this effect comes into picture
    If you enter Material no between 125 and 150 you will get "Material not allowed".
    Follow the above procedure with your requirements(data element,screen name)
    And to assign a screen name and program to a Field Exit:
    In the 'Field Exits for Data elements' screen, in the application tool bar you can assign the Program name and Screen no. by clicking Assign Prog. /Screen.
    You will get the above screen by
    1. goto tcode CMOD
    2. Enter PRFB in the command prompt and press ENTER
    Another procedure for implementing the Field Exit:
    One more way to do this is goto tcode CMOD.
    Enter PRFB in the command prompt and press ENTER
    In the screen select the menu Field exit --> Create and follow the same procedure as above.
    Please see the below links hich might be useful
    http://www.****************/Tutorials/ExitsBADIs/MK01/FieldExit.htm
    ****Reward points if found useful
    Regards,
    Naresh

  • TVARV - Dynamic Period and Year

    Hi,
    A standard FI report is executed weekly in batch job. The selection screen for the report has the following fields: Period and Year. We need the following:
    1) A report variant that takes the current period and current year
    2) A report variant that takes the previous period and current year
    I know that it is possible to have dynamic dates (Current / date calculations), but is it possible with period and year as well ina  variant?
    What do the variables in TVARV table "SAP_SCMA_PERIOD" and "SAP_SCMA_FISC_YEAR" do?
    Since this is a standard report, what could be the solution?
    Awaiting response.

    Hi Anuritha,
    Did you able to solve this problem. Basically I am also in the same situation, so it would be great help if you suggest me what needs to be done exactely !
    How did you manage the variants SAP_SCMA_FISC_YEAR & SAP_SCMA_PERIOD in TVARV table to work accordengly.
    Looking forward for your reply.
    --Thanks
    Pankaj

Maybe you are looking for