KE28 Top-down distribution for only part of the Value Field
Hi Experts,
We have a situation where we will make manual postings in CO-PA through KE21N. Part of this postings will be at the lowest detailed level and part will be for a more summarized level od characteristics. All the postings will flow to the same value field.
We need to make a top-down distribution only for the postings that were made in a summarized level, because the other postings already have the details that we need.
Is it possible?
Kind Regards
Mayumi Blak
Hi Venkata,
Please note that :-
you can not distribute to a characteristic that already contains a
value. Please see note 77476. If you want to distribute to eg.
profit center, then the characteristic must be initial (in the data
to be distributed).
In the case where the log showed "number of receivers" but no line
written is a common problem in transaction KE28 logged by customers.
One example is that, if the amount of line items is 0.00 for all the
receivers, no line item will be written.
No values in reference data:
If there are no values in reference data for some segments (see the
log). No records are posted (segments which were distributed, but
their value is zero i.e. there is no value to be distributed, are not
posted).
No initial values in the distribution level (ie. # - non assigned)
in each of the characteristics in distribution level.
Kind Regards,
Abhisek Patnaik,
Similar Messages
-
Display only part of the STRING field, but search ALL field
Hi all,
I have a field VARCHAR2(4000) that holds a lot of text.
When I make a report in APEX, it shows in each row, ALL text, so the report is very "ugly".
I want to limit the display of that column for only the first 60 characters.
I tried to use the SUBSTR function, that worked, but the search option will search for the text only in that 60 lenght characters, and will now search in the rest (not displayed) part of the field.
Is there a way to do this full search and display only part of the field?
ThanksYou can have the 'substring' column displayed to the user, but have another column which shows the full text lets say it has an ALIAS of "*SEARCH_LARGE_TEXT*" in the report definition(and is among the displayed columns).
You can hide the large text column(SEARCH_LARGE_TEXT) using JS as
$('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
Note: ^= syntax used to match data column even when break formatting used
You can make sure that the column stays hidden even after an IR filter or refresh by binding it to the refresh event of the IR by
$('#apexir_WORKSHEET_REGION').bind('apexafterrefresh', function(){
$('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
change the string "SEARCH_LARGE_TEXT" with your column's alias
Hope it helps -
I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty any more space, nor to speed up my computer? Any suggestions? All your contributions are welcomed. Thanks. Mehmet Mazhar Celikoyar
Below is the result:
Hardware Information:
MacBook Pro (15-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,3
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
HP IO - Path: /Library/StartupItems/HP IO
System Software:
OS X 10.9 (13A603) - Uptime: 3 days 22:8:6
Disk Information:
ST9500420ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (220.49 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.64)
com.livedrive.filesystems.livedrivefs (2.1.14)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS4.plist
[loaded] com.creativebe.MainMenuHelper.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
[loaded] com.magican.castle.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[failed] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist
[loaded] com.hp.messagecenter.launcher.plist
[loaded] com.hp.productresearch.plist
[loaded] com.rim.BBLaunchAgent.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
[failed] com.UninstallerTool.plist
[failed] com.VolumeWatcherTool.plist
[failed] com.zeobit.MacKeeper.Helper.plist
User Login Items:
BlackBerry Device Manager
HP Scheduler
3rd Party Preference Panes:
Adobe Version Cue CS4
DC30 Xact Driver Panel
Flash Player
Flip4Mac WMV
Perian
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
OctoshapeWeb.plugin
Bad Fonts:
None
Time Machine:
Mobile backups: OFF
Auto backup: NO
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 278.75 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 2 TB
Total number of backups: 5
Oldest backup: 2013-10-24 23:21:31 +0000
Last backup: 2013-10-25 02:59:08 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 499.25 GB X 3)
Top Processes by CPU:
3% WindowServer
1% EtreCheck
1% Microsoft PowerPoint
0% BBLaunchAgent
0% fontd
0% aosnotifyd
Top Processes by Memory:
168 MB Microsoft PowerPoint
123 MB Safari
86 MB Mail
74 MB WindowServer
45 MB com.apple.WebKit.Networking
45 MB com.apple.WebKit.WebContent
41 MB Finder
41 MB PluginProcess
41 MB mds_stores
33 MB Notes
Virtual Memory Statistics:
72 MB Free RAM
1.27 GB Active RAM
1.24 GB Inactive RAM
667 MB Wired RAM
2.58 GB Page-ins
111 MB Page-outs -
Syncing only part of the playlists
Hi,
Is it possible to sync only part of the playlists? It seems that if I remove some of the songs from my hard drives, iTunes removes the files from my iPod as well. For example, in my iPod I have a playlist called ABC that contains a song DEF and GHI. If my hard drive no longer has these songs and the playlist's removed in PLAYLISTS, playlist ABC and the songs in my iPod will be deleted after I do a sync. How do I keep the songs in my iPod when they're no longer in my hard drive?
Thanks,
SunIf I select just one of the many playlists I want to update, it seems to update just that playlist and remove everything else.
iTunes won't remove anything from the iPod if you are Manually managing your music.
To remove songs from the iPod, YOU have to select the songs and delete them yourself.
Just like if you want any songs on the iPod, YOU have to select them and drag them to the iPod.
So it doesn't do incremental synchronizing?
If you are manually managing your music on the iPod, it doesn't do ANY syncing. -
When I hook up my air to a LCD screen only part of the image on the air is projected. Solution anyone?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation. -
Exporting only part of the Sequence
I do not have any in and out points on my sequence, but when I export, only part of the sequence exports. I have chosen numerous encoding presets, tried placing in and out points at the beginning and end, but it still does not work.
I've tried exporting through DV NTSC and DVCPRO720p60.
Say if I had a 10 minute sequence, then it'd only export 3/4th of it. -
Clip for trailer won't load, regardless of the size the error message keeps popping up, "That clip is not long enough. Choose a longer clip for this part of the trailer."
I got it out!
Here is how.
None of the Apple-suggested ways worked. However, before totally giving up I started Roxio Popcorn and pressed the big eject button on it. It came out effortlessly!
So, I thought "Weird..."
I put the CD back in and reproduced my original problem. I got it out just as easily using Roxio Popcorn Eject feature.
So, I then thought "Maybe it is the disk?" There is nothing wrong with the disk as far as I can tell. It is perfectly round, has a smooth label-side surface. It is not even a label, it is a standard software install disk you buy in stores.
I inserted a different disk. The mini mounted it, I browsed it, and then ejected it by dragging it to trash. Worked fine.
I tried a few other disks.
The drive seems to work fine.
Maybe that CD is cursed, I dunno. I tried that disk in my PowerBook and it works fine there.
Who knows ?
I am still backing up my hard drive as I type this message in case I need to take it to the store. -
Snow Leopard brand new iMac, several user accounts: some Safari pages show AAAAAAAAAA instead of tex, but for only one of the users
Check out this thread. https://discussions.apple.com/message/11938010#11938010
-
Field name and table name for the value field
hi,
i requred the value field for which the quantity that is not delivered in purchase order, so please tell me which field i have to go for the value field.
thanks and regards.Hi,
There is no direct field to get the PO Open qty(undelivered Qty).
Take the PO quantity for each Item from EKPO-MENGE.
For each PO Item there will be multiple GR(good's receipts) 's in MSEG table.
So pass EBELN and EBELP for MSEG table and Take all the GR Quantities(ERFMG) field and sum up .(have to take care of the Movement type also, becasue there will be some returns and GI's).
Substract the GR qty from PO qty you will get the UNDELIVERED QTY of A PO.
Regards,
Anji -
Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)
All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya -
Top down approach for creating the web services in NWDS 7.1
I am trying to develop a web service in top down approach.
1) I created a Dynamic web project.
2) Created a WSDL File using the WSDL Graphic editor.
3) Now i am trying to create the Webservice from the WSDL file , i am getting the following error
The SAP Netweaver Web service runtime does not support the service project type Dynamic Web Project.
How do i created the web service from here on.
Regards
ABSIn NWDS 7.1 i used to create webservice.I followed the process given in sap help.
steps:
1. In the SAP NetWeaver Developer Studio, you create an EJB Project and an enterprise application project for the Web service.
2. In the EJB Project, you create an EJB Session Bean 3.0 and implement the business logic of the Web service.
3. You expose the EJB Session Bean 3.0 as a Web service, using the Web service wizard in the SAP NetWeaver Developer Studio.
4. You deploy the Web service endpoint on the application server.
Thanks,
Murthy. -
Scrolling only part of the screen
Hi,
I have the following problem.
1. I created a JFrame, that fills the whole screen.
2. The frame contains two JPanels.
Now for the problem:
I want the top panel to hold a JPEG that is much bigger than itself, so it should contain a JScrollPane or a JViewport, because I want it to be scrollable. It seems, that I only can change the viewport, that the image scrolls downwards. For some reason the area doesn't even react when I try to change the position of the image, so that I can view the part of it that is outside of the panel. Is there anything I can do ?
To better visualize the problem :
Do you know the computer game civilization ? The bottom part of the screen holds menues. The uppermost part is a scrollable map. I want to create something similar.maybe you need a JSplitPane, split the frame into upper-lower two parts. The upper part holds the JScrollPane for the image panel, the lower part holds the second panel
-
How to copy only part of the music media folder and library to another Mac
Dear friends,
I run iTunes in Mac OS. The iTunes music media folder is now located in an external HD because it´s quite large (2T). The problem is that I´got a second Mac and I´d like to copy -in this second Mac, only part of my music using only its internal HD (300 Mb) . How can I do this copy while preserving art and play-lists?
Thanks in advancetcynk00 wrote:
how I can transfer only selected pieces of music (all library will not fit anyway)
that's what playlists are for.
and how to maintain transfer process in future when I want to change the music on my nano.
add/delete track to/from the playlist you sync to your device.
JGG -
Pretty much what's up there.
If there's a Flash open, and I scroll down/open a window/open a new tab such that it is not visible anymore, it will not be animated. It freezes until any portion of it is visible again. This wasn't happening before a flash update, I believe.They will stay on the screen. However, Process Monitor is only intended for advanced users. It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error. This is far easier than trying to use Process Monitor, which is very complicated.
I used Process Monitor to confirm that it was just that key which was causing the problem, and not others. Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista). If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
http://technet.microsoft.com/en-us/sysinternals/bb896645
It replaces the older Sysinternals "FileMon" and "RegMon". For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot. First of all to just show Registry events. Then to just show events from the manual Flash activeX installer executable. The I added a filter to show only non-successfull results. And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess. When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable. e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key. -
Grep to replace only part of the found text
I'm using ^.+~> to search the begging of a paragraph up to an EN space, but is it possible with GREP to format just PART of the string found?
There are roman numerals that precede a period and an EN space and I want to apply formatting to just the roman numerals, leaving the period and EN space alone.
I did found one post that mentions using "some" but I'm not familiar enough with GREP to know how it works.
Can anyone commend a good source for GREP coding?
Thanks,
KenTry this:
^(.+)(?=\.~>)
I just changed your original code to use the period and en-space as a positive lookahead -- it'll only find characters at the beginning of the line if they're followed by a period and an en-space, but will not include them as part of the found text.
If these items all have the same paragraph style applied to them and that style isn't used anywhere that you wouldn't want the formatting, I'd also consider setting this up as a GREP style. You could also do it as a nested style applying your character style up to (.~>). (Don't include the parantheses - I was just trying to make it clear what the expression to use is.)
Hope that helps.
Maybe you are looking for
-
Tried hooking up my mac mini using the apple mini displayport to vga cable to my 22" acer monitor but im getting nothing. At the same time I hooked my tv to the hdmi connection and could see in the display settings on the mini that a dialogue box for
-
i bought my iphone from a friend which is now dead..i dont know the marketing part number???is their another way
-
Lumia 520 nokia music activation problem
When i try to download song in nokia music it says-this phone is already registered with a nokia music unlimited subscription. I don't know how to fix this problem.
-
I have an Indigo 350 mHz from Summer 2000 in which the screen will no longer come on. I get a green power button but no chimes. I have looked through the other discussions and have replaced the battery and reset the PMU, all to no avail. I am now und
-
Memory leak with CryptGetProvParam
I suspect there is a memory leak in the function CryptGetProvParam. I made a Win32Console app in Visual Studio 2008 to recreate the problem. With the example app running it is possible to use Task Manager to see the memory usage of the .exe steadily