KE30 and KKO0 hang after EHP5 enhancement pack implementation

We implemented EHP5 and now KE30 and KKO0 hang up when we double-click on a report. We tried to run RKD_REGENERATE_ALL_REPORTS and that hangs as well. We've searched SDN and SAP notes but can't find anything - any ideas????

Yes, we did enter a customer message and SAP was able to resolve this. During our EHP5 enhancement pack implementation, for some reason the kernel file abap.pad only got copied to our central SAP instance and not any of our other dialog servers. Once we copied the newest version of abap.pad to all of our servers, everything works fine.

Similar Messages

Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade

We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5. I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed. Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile. This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse. We see there is a high use of java script, and the processors canu2019t handle this. When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues. When we login to tcode LM00, with the RF scanners, the system is very slow. It might take 30 seconds to confirm one item on a WM Transfer Order.
1.) Can we revert back to Web SAP Console, after we have upgraded to EHP5?
2.) What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies. One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.

Tom,
I am sorry I did not see this earlier.
I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
Let me know if I can answer more questions related to this topic.
Cheers,
Shari

Stereo tunes only play one channel and Internet hangs after 4.21 Install

My daughter recently updated her 2nd Gen iTouch to 4.21 which I assume is an operating system. On stereo tunes, now only one of the stereo sound channels plays (right side). On older monaural songs, both right and left earphones produce sound. Also, Internet hangs now after initial home page load. How do I either roll back to an older version of the OS or get fixes for 4.21?

http://www.thehangtime.com/gb/gbfaq2.html#leftspeakeronly

Wifi hangs up on start-up, and computer hangs after using internet for 5 min.

HP Touchsmart tm2, using Window's 7 64-bit. There are no error messages popping up, but what happens is I start my computer, and my wifi/internet connection icon seems to freeze while loading possible internet connections. If I turn off my wifi and then turn it back on using the button on the side of my computer, it seems to work correctly, then.
But, when I get on the internet, no matter what site I go on to, my computer will just hang up after being online for at most 5 minutes. Mozilla Firefox will go into a Not Repsonding mode, and I can't minimize it or click/open any other programs. CTRL+ALT+DEL doesn't work, and when I hover over any icon, nothing seems like it's recognizing my mouse. The mouse moves, though, and the time even keeps going (it'll change from 9:13 to 9:14 and so forth).
It ends up figuring itself out, though, after another 5 minutes (literally an entire 5 minutes) and then seems to work okay.
Recently, I updated CCleaner to the newest version, cleaned out my internet cache, defrag my computer using Defraggler, used CClean to also wipe by free space, and updated Avast! Antivirus to the newest version and ran a full virus scan with no threats detected... :/

Hopefully No real Damage was done.
A Surge Protector works fine with items like Lights, Lamps and small electrical items. Where the problem arises is with Computers, which are precision electrical devices. The only real protection is a Battery Backup like an APC.
http://buy.apc.com/commerce/storefronts/etail/default.aspx?storefrontcode=apcfs& countrycode=us&tsk=F841U&pc=18349&keycode=f841u&promocode=18349&promo_key=18349
When there is a Power outage no matter what the source. can also create tremendous Power Surges. This can happen when the electricity is turned back on and can cause frying all of your Electrical Appliances.
Having an APC will save all of your Computer Equipment including your Modem, Router, Printers, Scanner, Computer, as well as Phone lines.
A simple Surge Protector simply isn't enough protection and especially the cheaper models.
Here is the simple way to check and see if your equipment is still operable.
Turn your Computer clear OFF and pull the Power Plug
Pull the Power from both your Modem and your Router.
Wait a minimum of 5 minutes. After the 5 minutes Plug in your Modem and wait a minimum of 3 minutes.
Now plug in your Router and again you must wait 3 to 4 minutes.
Now you can plug in your computer and restart it and don't touch anything. If your computer starts up then you got lucky If not you will probably need to take it to the genious bar at your closest Apple Store. Chances are that your computer has components that have been fried from the power surge. Good Luck and hope your computer restarts.

Physical Standby and Primary Hangs after Role Reversal

Created Physical Standby using two machines.(10.2.0.2)
Plugged it into Grid Control(R3)
Tried to switch over. This was carried out successfully but then hanged while updateing the configuration. This is what I am getting in the drcMITDG.log on
Primary:
DG 2007-10-05-09:02:33 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:02:34 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:02:34 0 2 635079900 DMON: ENUM_DRC: success. (len = 987)
DG 2007-10-05-09:02:34 0 2 635079900 DMON: ENUM_DRC operation completed
DG 2007-10-05-09:02:47 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:02:47 0 2 635079901 DMON: ENUM_DRC: success. (len = 987)
DG 2007-10-05-09:02:47 0 2 635079901 DMON: ENUM_DRC operation completed
DG 2007-10-05-09:02:48 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:03 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:18 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:28 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:28 0 2 635079902 DMON: ENUM_DRC: success. (len = 987)
DG 2007-10-05-09:03:28 0 2 635079902 DMON: ENUM_DRC operation completed
DG 2007-10-05-09:03:33 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:48 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:04:03 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
SECONDARY:
DG 2007-10-04-14:04:51 0 2 0 DMON: Health check master lock conversion successful
DG 2007-10-04-14:04:51 0 2 0 DMON: a process acquired the healthcheck master lock
DG 2007-10-04-14:04:51 0 2 0 DMON: posting primary instances for SWITCHOVER phase 5
DG 2007-10-04-14:04:51 0 2 0 DMON: SWITCHOVER Completed with errors
DG 2007-10-04-14:04:51 0 2 0 INSV: Received message for inter-instance publication
DG 2007-10-04-14:04:51 0 2 0 Primary Site is named: MITDG_BACKREST
DG 2007-10-04-14:04:51 0 2 0 req_id 0.0.0, opcode CTL_SWITCH, phase END, flags 5
DG 2007-10-04-14:04:51 0 2 0 error = ORA-16509
DG 2007-10-04-14:04:51 0 2 0 DMON: dispersing message to standbys for SWITCHOVER phase 5
DG 2007-10-04-14:04:51 0 2 0 INSV: All instances have replied for message
DG 2007-10-04-14:04:51 0 2 0 DMON: site 02001000, instance 00000001 queuing healthcheck lock re
quest
DG 2007-10-04-14:04:51 0 2 0 req_id 0.0.0, opcode CTL_SWITCH, phase END
DG 2007-10-04-14:04:51 0 2 0 DMON: Releasing healthcheck master lock
DG 2007-10-04-14:04:51 0 2 0 DMON: Health check master lock conversion successful
DG 2007-10-04-14:04:51 0 2 0 DMON: a process acquired the healthcheck master lock
DG 2007-10-05-08:48:42 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:48:52 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:07 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:22 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:37 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:52 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
Any idea what is going on..
Thanks

Hi, you must upraise a iTAR to Oracle Support for resolve this problem, because this behaviour is irregular and you will lost much time for analyze and resolve this problem.
Regards.

ITunes won't force quit and is hanging after update

OK, so I downloaded the new update for my iPhone. While it said preparing to install it took a long time. I figured it was frozen so I did a force quit. Now I'm stuck. I can't get into my iPhone because it is showing a picture of the plug going into iTunes logo.
I can't force quit itunes either. It just doesn't do anything. I tried rebooting and iTunes is still "open" and won't respond.
Any help would be appreciated

I seemed to have gotten it to finally disappear after rebooting again and again. Though it sent my phone into recovery mode so I'm working on that

Firefox very slow and repeatedly hangs after upgrading to 7.0

I upgraded to Firefox 7.0 this morning. Since updating, Firefox is running excruciatingly slow. When trying to load webpages in new or existing tabs Firefox will hang indefinitely, and I need to restart Firefox to get it working again.
I have tried clearing cookies and cache, and starting Firefox in safemode with all add-ons and plug-ins disabled, but neither have helped the problem.
Running Windows 7 64 bit, 4GB RAM

I may have found a solution to this problem [http://forums.mozillazine.org/viewtopic.php?f=38&t=2321783 here] (well, at least Firefox has been working again for the last few hours, not sure if it will prove to be a long term solution or not).
As it says in the linked article, type '''about:config''' into the address bar, find '''network.http.max-connections''' and change its value from 256 to 48.
I have absolutely no idea why this works but it seems to. According to my resource monitor Firefox still seems to be using a ridiculous amount of memory and disk, and my cpu fan is still going crazy, but at least websites are loading again!
Does this fix the problem for anyone else?

Mail and iCal hang after 10.7.4. update

Hi there,
I've update to 10.7.4, and ever since my iCal and Mail get the beach cursor - I've waited an hour and longer and then forced quit them, after that they work for a few minutes (Mail longer, iCal until you create or change an item). I realise that Spotlight is reindexing (since this morning, and still saying "estimating indexing time". Any suggestions for a cure?
Thanks,
Emanuel

Well I would recommend this solution if you have the following enabled.
As I had this issue with a client of mine.
The situation was the same as described, upon opening mail it took a long time for the program to respond and the colored wheel span for a while and then after a few moments the mail app started to responed.
Solution:
If you use iCloud and you have backed up data, backed to icloud you will need to disable it.
after canceling icloud from the system mail started to respond right away upon launch.
If you find this helpful please replay.
Thanks hope this helps.

Flash Player Clashes and Browser Hang

Hi, I have been experiencing the following problem for the past few weeks.
My IE and Firefox hang after finished viewing video via Adobe Flash Player. I was prompted to send a crashed report and reload the page before the browser is responsive again.
I am using the updated browser and did try disabling hardware acceleration but problem unsolved.
Amazingly my Chrome browser is not being affected.
Please help out, thanks.

Thanks for sending the Crash report. If you wouldn't mind, we'd like to get more information from you. This FAQ details the info we'll need:
How do I report a Flash Player crash to Adobe?

My multiclip preview pane hangs after a few seconds

Uh oh.
This is my first time editing a multiclip with 6 HD streams, and playback hangs after just a few seconds. If i pause and give it a moment to catch up, it will play for a few seconds more.
On the RT button on the Timeline, I have selected: Safe RT, play base layer only (doesn't seem to matter) Video Quality Poor (Dynamic isn't any better), Frame Rate Quarter, and of course Multiclip playback is checked.
I'm working with ingested AVCHD footage in ProRes LT. I already shut down, waited a minute, and restarted the machine, no other programs running besides browser and mail.
I'm wondering if there are any other adjustments I can make so that I can see the multiclip view to do live switching thru this footage.
I'm working with an eSata external drive with an eSata card in the expansion slot. It's the fastest drive I've got.
Thanks for any suggestions (besides buying the Thunderbolt drive) I'd be grateful!

It is highly unlikely your disk system can handle playing back 6 steams of ProResLT.
A serious multi drive RAID run through esata should handle this. A single drive will probably choke.
First set your RT playback to Dynamic - not safe.
Beyond that there are at least three ways to deal with this ...
1. Use ProRes Proxy (or DV) in an offline-online process.
2. Figure out if you REALLY need all six angles. Choose which 4 to use for the main cut (or three if that's all your drive can handle), then output that sequence as a new file using "current settings, self contained". Bring that new file in and make a second multiclip adding in the other two (or three) streams.
3. Acquire a RAID that can push out 400-500 MB/s.
x

SDM hangs after 3-4 deployments

Hi All,
I have an SAP CRM ISA application(B2B).Once I make some JSP related changes to it,I deploy it using the SDM(6.20).Normally it takes around 20-30 seconds for the deployment of the .ear file.
After 3 to 4 deployments,I find that the SDM takes a very long time(around 20-30 mins) for the deployment and eventually hangs.After this,I am not able to deploy the .ear file again[I get a message stating the deployment actions are not completely configured]
Once the server is restarted,I am able to deploy the .ear file.But restarting the server after every 3-4 deployments is not a feasible solution.Is there any other alternative?
Please help.
Thanks & Regards,
Shalini

Yes due to less memory it will take more time to deploy. check your System Requirements how much free space is required how much you have for you installation.
Some other reason is If your Adding jars of more proects in your deploying EAR project it will take more.
Instead Adding jar to the project go for referring project like.
Create a DC Project in that make public parts and add that public parts to your deploying project (mandatory EAR application-engine-xml should refer that DC ear).
it will reduce the deploying time
Regards
Suresh

Purchase requisition document type change after Enhancement pack 4

HI,
we have recently upgraded to enhancement pack 4, after which i am not able to change purchase requisition document type.
In change mode ME52N, the system is allowing to make change but when i goback and display the same PR again the change is not visible in change history also.
I am able to make other changes. facing the problem with change in document type only.
Regards,
Raghu

Hi,
One thing please note that once you select the document type and draft the PR and save the PR, you will get the doc number.
Once you get the document number you cannot change the PR document type .
The reason is document type is linked with number range so it cannot be changed because different seriers of document number is assined to differentdocument type.
And moreover document type is linked with the screen settings also. So I would request you to check the settings for each doc. type

How to print company logo in Excel/ PDF after Enhancement Pack 1?

Hi all,
I realise this topic has come up time and time again but apparently this functionality has changed after Enhancement Pack 1 for BW....?
My problem is simple. I have a series of reports on our portal, formatted using the WAD, and there is a company logo on the reports. When exporting to PDF or excel, the logo disappears.
The SAP documentation states that the addition of the logo when exporting was not available previously, but it was planned, and seemed to imply that this would be possible in EHP1.
We have just applied EHP1 to our test system however I cannot find how to switch on this functionality or how to get the logo onto the exported reports. I can't find any documentation on how to do this.
Is anyone else using this after applying EHP1? Is anyone from SAP reading who can tell me where this functionality is??
Thanks!
Mischa

Thanks but this doesn't work. It works exactly as it did before the Enhancement Pack and doesn't automatically display the image.
So I guess I am missing something - my image is a bmp. file, will this work or should I save it as something else?
Are there any settings in the WAD (either in the Web Template itself or on the button to export) which I need to change to be able to display this logo?
Or are there any settings I need to make in the backend of BW after the application of the Enhancement Pack?
Any more ideas please?
Thanks
Mischa

Satellite U400-22n and Win7 - screen hangs after 5 min

Hi, This is my first post
Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.

hi Mather,
any bluescreens visible?
win7 32bit i guess...
you have to install all the drivers for win7 provided by toshiba in the right order!
first chipset and patchfiles if available...
i think a clean install will do the job!
make sure that the hdd is error free!
you can upgrade from vista 32bit to win7 32bit
but no chance to upgrade to a win7 64bit when a vista 32bit is installed...

Iphoto hangs after upgrading to Yosemite and latest iPhoto version

It tells me the library needs upgrading, and starts to search the library. The progress bar suggests something is happening then hangs after about 99% completion. I have had to force close twice after several hours stuck at that point and then start the whole process from scratch when I restart.

Have you followed these instructions - http://www.fatcatsoftware.com/iplm/Help/rebuilding%20a%20corrupted%20iphoto%20li brary.html
iPhoto Library Manager > Help > Rebuilding a corrupted iPhoto library
Printable help
Rebuilding a corrupted iPhoto library
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its library data files. Note that iPhoto also has a built-in rebuild function that can be sometimes be used to repair a corrupted library database. You can find instructions on how to use that on Apple's website at http://support.apple.com/kb/HT2638 (iPhoto 6 or later) or http://support.apple.com/kb/HT2042 (iPhoto 5 or earlier).
iPhoto Library Manager's rebuild works differently, in that instead of trying to repair the library in place, it creates a brand new library and tries to reimport the entire contents of the original library into the new one, including reconstructing albums, photo metadata, etc. Note that rebuilding a library has all the same limitations as other photo transfer operations as far as what can and can't be copied between libraries. Also, depending on how badly damaged the library is, iPhoto Library Manager may or may not be able to piece together some or all of the library metadata.
To start a rebuild, select the library you would like to rebuild, then choose the "Rebuild Library" item from the "Library" menu. You will be prompted to choose a location for the rebuilt library, and whether or not you want iPLM to scavenge orphaned photos it finds in the library package. Once you've made your choices, iPLM will examine the library and rebuild the library structure and photos as best it can, then display you a preview of what it was able to find. If your library is badly damaged and the preview is missing a lot of content from the original library, this can save you from going through with a rebuild that won’t end up being of much help.
Once you've had a chance to examine the preview, if you want to go forward and create the rebuilt library, click the "Rebuild" button in the upper right. iPhoto Library Manager will create a new library and start importing the contents of the original library into the new one.
Scavenging photos
In some cases, either the iPhoto library database is too damaged for iPhoto Library Manager to be able to salvage any information from it, or the library data is incomplete and there are photos that still exist inside the library package, but iPhoto has lost track of them. In these cases, you may want to check the "Scavenge orphaned photos" checkbox when choosing a location for the rebuilt library. After iPhoto Library Manager has read the library data as best it can, it will perform an additional pass through the package and locate any photos that are no longer referenced in the library database. Any additional photos that are found will be included in the rebuild, and a new "Scavenged Photos" album will be created in the rebuilt library containing any scavenged photos.
LN

KE30 and KKO0 hang after EHP5 enhancement pack implementation

Similar Messages

Maybe you are looking for