KE30 Post upgrade unicode issue in E-SECAMG-ELI.

Hi experts,
Post upgrade to ECC6.0, While executing a KE30 report "E-SECAMG-ELI" in classic drilldown report mode, everything seams to be fine. but when we see in Graphical report output mode an error "The length of the structure in a non-Unicode 5.129 DATA" is shown. please provide some suggestions on what can be done to rectify this.
Regards,
Sri.

Hi Sri,
the numbers of columns you want to display in the drilldown control of the graphical output is restricted to less than 1000
To solve the problem, you could deactivate the drilldown control in the graphical output by changing the selected areas of the graphical output in transaction KE32.
Best regards,
Nils Buerckel

Similar Messages

OSX Mountain Lion post-upgrade Video issues.

I purchased this MBPRO 13 on Saturday. Upgraded to Mountain Lion this afternoon ... now weirdness has taken over.
Has anyone see this happen post-upgrade? This happens approx. every 20-30 minutes after starting up. Sure would love to know what this is and a resolution :-/
I also have a video of the issue here ---> http://www.youtube.com/watch?v=YDxEYIdlGGU&feature=g-upl

You have 14 days from receipt to return it for a refund.
That looks like a Hardware problem to me, unless you have installed a lot of goofy aftermarket stuff.

Post Upgrade - autodialing issues

A few days ago I completed the software update and I have found that now, whenever I close my bb case (wallet style case), my phone autodials my voicemail line and/or a random number through the keypad screen. Even if I purposely close my phone on any other screen to avoid this happening. I estimate that this occurs about 50% of the time. Annoying and potentially embarassing.
Any suggestions? Thank you!

Hi,
we hade the same problem in a project which we upgraded to 2013 using
Upgrade-SPSite http://website/sites/test -VersionUpgrade
The problem seemed to be a custom ghosted page layout which we had. Newly created site collections worked fine.
I tried with the newly added attribute ReplaceContent, e.g. <File... Type="GhostableInLibrary" ReplaceContent="TRUE">, in the elements.xml/module for the page layout and tried reactivating the corresponding page layouts
feature. After that the pages using the page layout now works again. The customization of the pages seems to be intact as well.
Hope this helps you in the future even if the question was asked one year ago.
PS. This also is useful when provisioning webparts with AllUsersWebpart since this solves any need for any custom "duplicate webparts fix"-code DS.

Change Log issues - Post Upgrade

Hi Experts,
We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
Thanks and Regards,
Jay

HI JayaPrasad,
Chek the note : 1059171 which is related to Change log,
I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
Regards,
Srinivas

Anyone had issues with iTunes 11.0.4 like me? Keep getting initial (post upgrade) tutorial screen when going into iTune and loss of sync with 1st Gen Apple TV (infuriating as have to re-connect and re-sync everything!!!)

Following upgrade to iTunes 11.0.4 I have had intermittent but numerous (at least 10 incidents) where I go into iTunes and I am presented again with the initial (post upgrade) registration/tutorial screen....as if I have just upgraded iTunes!
This is very frustrating as apart from having to keep re-setting my preferences (e.g. display side bar and menu bar), iTunes no longer recognises my Apple TV (1st generation) as a device. If I check on my Apple TV under 'Computers' my iTunes library is displayed but 'grayed out' indicating the Apple TV can no longer 'see' my iTunes Library. To resolve, I then have to disconnect the Apple TV from my iTunes Library then reconnect again (which works) but ou've guesses it...al the music and movies I have synced across to Apple TV needs to be synced across again....which takes time as we know.
I have re-installed (and re-downloaded) iTunes twice and ruled out any connectivity issues. I suspect some form of bug with iTunes.
Anyone else experienced this and any tips to fix this?

Yes stupid itunes 11.0.4 does not sync to my Apple TV. I tried resetting it and no luck.

BW 7.0 to 7.3 upgrade-Post upgrade activity and Transport the changes

Hi Experts,
We have upgraded our BW system from Release 7.0 to 7.3. As part of Security post upgrade activity I ran Migration steps,
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3. and later SU25 steps too.
I fixed the Roles appeared in SU25 Step 2C and made below Characteristics as auth relevant,
0TCAACTVT
0TCAIPROV
0TCAVALID
But I have few doubts before Quality movement,
1) Do I need to Run the Migration steps again in Quality and Production?
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3
2) Do I need to transport only above Characteristics to Quality and Production or need to transport all the Characteristics and Analysis Authorization?
3) How to transport Characteristics?
Please provide your views.
Regards
Parag

Hi,
Technically its possible but it has its own consequences again based on the kind of object that you are going to Tranport.
The above statement is applicable considering that you have 3.x flow in Bi7.0 system and with no DTP's or transformation etc...
And if the BI7.0 is Unicode and 3.5 system is non-unicode then you will have lot of issues and most of the times you need Basis help to resolve the issues. So its bit risk to move the transport this way.
So its better to develop the objects once again in 3.x system and then transport from D to Q and to P as a standard practice.
Hope this helps.
Murali

ASU-process POST Upgrade Step on SQL database

Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
IS-OIL Application Test 600                                                 Optional
KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
CGPL: Entries are blank after upgrade                                                Obligatory
Error handling of task group execution                                Optional
Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Convert customizing for warehouse funds ctr scenarios     Optional
Various problems classification commitment items (class type     Obligatory
Unauthorized error messages udring fiscal year change/reassi     Obligatory
RFFMUDX1 migrates incomplete budgeting tables                          Obligatory
Non-7bit-ASCII character used for BCS key figures             Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory
Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
Activating VMC for the Internet Pricing and Configurator     Obligatory
Customer specific BSEG-fields not transferred                  Optional
Conversion of report headers in drilldown-reporting            Optional                                   600
IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
Conversion of CO-Total-Tables                                              Obligatory     46C                      500
Conversion of CO-line-item table COEP                                Obligatory     46C                       600
New General Ledger, problems in CO-documents                 Obligatory                               500
No receivers found in allocations                                          Obligatory     46C                        470
Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
Migration of process parameters in recipe management     Optional     110                        600
FAQ new depreciation calculation                                        Optional                                600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
Reloading Table T512W                                                        Optional
Converting Short Texts                                                         Obligatory
Migrating Data                                                                         Optional     4.7
Activating SAP ECC Extensions                                          Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay

Hi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit

Upgrade step ASU-process post upgrade step

Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
IS-OIL Application Test 600                                                 Optional
KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
CGPL: Entries are blank after upgrade                                                Obligatory
Error handling of task group execution                                Optional
Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Convert customizing for warehouse funds ctr scenarios     Optional
Various problems classification commitment items (class type     Obligatory
Unauthorized error messages udring fiscal year change/reassi     Obligatory
RFFMUDX1 migrates incomplete budgeting tables                          Obligatory
Non-7bit-ASCII character used for BCS key figures             Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory
Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
Activating VMC for the Internet Pricing and Configurator     Obligatory
Customer specific BSEG-fields not transferred                  Optional
Conversion of report headers in drilldown-reporting            Optional                                   600
IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
Conversion of CO-Total-Tables                                              Obligatory     46C                      500
Conversion of CO-line-item table COEP                                Obligatory     46C                       600
New General Ledger, problems in CO-documents                 Obligatory                               500
No receivers found in allocations                                          Obligatory     46C                        470
Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
Migration of process parameters in recipe management     Optional     110                        600
FAQ new depreciation calculation                                        Optional                                600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
Reloading Table T512W                                                        Optional
Converting Short Texts                                                         Obligatory
Migrating Data                                                                         Optional     4.7
Activating SAP ECC Extensions                                          Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PM

Hi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit

EJB references post upgrade from 8.1 to 10.3

Hi,
I have an application.xml file in META-INF directory of the EAR file. It has the below reference:
<module>
          <ejb>content.jar</ejb>
     </module>
     <module>
          <ejb>content_repo.jar</ejb>
     </module>
     <module>
          <ejb>netuix.jar</ejb>
     </module>
     <module>
          <ejb>p13n_ejb.jar</ejb>
     </module>
     <module>
          <ejb>prefs.jar</ejb>
     </module>
     <module>
          <ejb>wps.jar</ejb>
     </module>
Post upgrade I accidentally packaged an EAR without above references in application.xml and without actual jars in the EAR file. The application seemed to be running fine, did not test it completely though. Do we really need these jar files? I had upgraded this application from 8.1 to 10.3 using upgrade tool in workshop. This is a portal based web application. Also, what is the purpose of these libraries? Could these be automatically added by the upgrade tool to the weblogic.xml.

Hi Srini,
it supports but you need to upgrade correctly.
follow this link
Beehive Applications
after upgrade if you found some error like classnotfound error.
If those are the errors you were also experiencing, then please follow one of these options to resolve this issue:OPTION
1:Identify all the JARs that contain the beehive classes and explicitly add the jar files to the classpathOPTION
2:When you created the domain (if you used the Config Wizard), do you make it a "Workshop" domain? If not, try that.That should deploy the Workshop framework (Beehive controls, NETUI, etc) libraries as shared libraries. Then these libraries should be referenced in your applications weblogic.xml and weblogic-application.xml.
regards,
Kal

Hi Post Upgrade Job Failing

HI All,
We have recently done the Upgrade from BW 3.1 to BI 7.0
There is a issue regarding the POST Upgrade
One Job is failing every day
The name of the JOB is BI_WRITE_PROT_TO_APPLLOG
And the Job log is
06/18/2008 00:04:55 Job started                                                          00           516          S
06/18/2008 00:04:55 Logon of user PALAPSJ in client 200 failed when starting a step      00           560          A
06/18/2008 00:04:55 Job cancelled
                                                       00           518          A
This Job is actually running the program
RSBATCH_WRITE_PROT_TO_APPLLOG
when i try to run this program with my user id its working
but with the other user id which it is schedule its failing giving the messages as mentioned in the job log
Kindly suggest me
REgards
janardhan K

Maybe it's a dialog and no system or background user. so the job fails.
Regards,
Juergen

Solve oracle multimedia post upgrade errors

Hello,
I performed and out of place upgrade from oracle 10.2.0.4 to 11.2.0.4.
when I run the postupgrade script i have issues on oracle multimedia that i cannot solve.. it is about shared memory. I followed all the recommendations suggested on the pre-upgrade script.
SQL> @/oracle/product/11.2.0.4/dbhome_1/rdbms/admin/utlu112s.sql
Oracle Database 11.2 Post-Upgrade Status Tool           10-03-2014 15:06:57
Component                               Current      Version     Elapsed Time
Name                                    Status       Number      HH:MM:SS
Oracle Server
.                                         VALID      11.2.0.4.0 00:14:07
JServer JAVA Virtual Machine
.                                         VALID      11.2.0.4.0 00:11:08
Oracle Workspace Manager
.                                         VALID      11.2.0.4.0 00:00:48
Oracle Enterprise Manager
.                                         VALID      11.2.0.4.0 00:09:58
Oracle XDK
.                                         VALID      11.2.0.4.0 00:02:48
Oracle Text
.                                         VALID      11.2.0.4.0 00:00:59
Oracle XML Database
.                                         VALID      11.2.0.4.0 00:05:45
Oracle Database Java Packages
.                                         VALID      11.2.0.4.0 00:00:20
Oracle Multimedia
.   ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 32 bytes of shared memory ("shared pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   col#, grantee#, privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 136 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512:
at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-04031: unable to allocate 136 bytes of shared memory ("shared
pool","select i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds:
qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-04045: errors during recompilation/revalidation of
ORDSYS./f87ac59f_DicomEngine
ORA-04031: unable to allocate 32 bytes of shared
memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   ORDSYS./f87ac59f_DicomEngine ORA-04031: unable to allocate 32 bytes of
shared memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
.   ORA-06512: at line 14805
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
.                                       INVALID      11.2.0.4.0 00:55:05
Spatial
.                                    OPTION OFF      10.2.0.4.0 00:00:00
Oracle Expression Filter
.                                         VALID      11.2.0.4.0 00:00:16
Oracle Rules Manager
.                                         VALID      11.2.0.4.0 00:00:14
Final Actions
.                                                                00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
thank you
Mario.

I explicity set up the sga_target to 668MB as suggested by the pre-upgrade script.
see the output of preugrade tool:
SQL> @/oracle/utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 10-02-2014 17:24:25
Script Version: 11.2.0.4.0 Build: 001
Database:
--> name:          FUELPLUS
--> version:       10.2.0.4.0
--> compatible:    10.2.0.3.0
--> blocksize:     8192
--> platform:      Solaris Operating System (x86-64)
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 1071 MB
--> UNDOTBS1 tablespace is adequate for the upgrade.
.... minimum required size: 400 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 804 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 60 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 484 MB
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 668 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> cursor_space_for_time        11.1       DEPRECATED
--> background_dump_dest         11.1       DEPRECATED   replaced by "diagnostic_dest"
--> user_dump_dest               11.1       DEPRECATED   replaced by "diagnostic_dest"
--> cursor_space_for_time        11.2       DEPRECATED
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views         [upgrade] VALID
--> Oracle Packages and Types    [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java          [upgrade] VALID
--> Oracle Workspace Manager     [upgrade] VALID
--> EM Repository                [upgrade] VALID
--> Oracle Text                  [upgrade] VALID
--> Oracle XML Database          [upgrade] VALID
--> Oracle Java Packages         [upgrade] VALID
--> Oracle interMedia            [upgrade] VALID
--> Spatial                      [upgrade] VALID
--> Data Mining                  [upgrade] VALID
--> Expression Filter            [upgrade] VALID
--> Rule Manager                 [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER PUBLIC has 1 INVALID objects.
WARNING: --> EM Database Control Repository exists in the database.
.... Direct downgrade of EM Database Control is not supported. Refer to the
.... Upgrade Guide for instructions to save the EM data prior to upgrade.
WARNING: --> Your recycle bin is turned on and currently contains no objects.
.... Because it is REQUIRED that the recycle bin be empty prior to upgrading
.... and your recycle bin is turned on, you may need to execute the command:
        PURGE DBA_RECYCLEBIN
.... prior to executing your upgrade to confirm the recycle bin is empty.
WARNING: --> JOB_QUEUE_PROCESS value must be updated
.... Your current setting of "10" is too low.
.... Starting with Oracle Database 11g Release 2 (11.2), setting
.... JOB_QUEUE_PROCESSES to 0 causes both DBMS_SCHEDULER and
.... DBMS_JOB jobs to not run. Previously, setting JOB_QUEUE_PROCESSES
.... to 0 caused DBMS_JOB jobs to not run, but DBMS_SCHEDULER jobs were
.... unaffected and would still run. This parameter must be updated to
.... a value greater than 48 (default value is 1000) prior to upgrade.
.... Not doing so will affect the running of utlrp.sql after the upgrade
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
    EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
    SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
      WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
    SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
      WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SQL> SPOOL OFF
here are the last 100 lines of upgrade.log
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
.   ORA-06512: at line 14805
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
.                                       INVALID      11.2.0.4.0 00:55:05
Spatial
.                                    OPTION OFF      10.2.0.4.0 00:00:00
Oracle Expression Filter
.                                         VALID      11.2.0.4.0 00:00:16
Oracle Rules Manager
.                                         VALID      11.2.0.4.0 00:00:14
Final Actions
.                                                                00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
SQL>
SQL> SET SERVEROUTPUT OFF
SQL> SET VERIFY ON
SQL> commit;
Commit complete.
SQL>
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL>
SQL>
SQL>
SQL> DOC
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC>   The above sql script is the final step of the upgrade. Please
DOC>   review any errors in the spool log file. If there are any errors in
DOC>   the spool file, consult the Oracle Database Upgrade Guide for
DOC>   troubleshooting recommendations.
DOC>
DOC>   Next restart for normal operation, and then run utlrp.sql to
DOC>   recompile any invalid application objects.
DOC>
DOC>   If the source database had an older time zone version prior to
DOC>   upgrade, then please run the DBMS_DST package. DBMS_DST will upgrade
DOC>   TIMESTAMP WITH TIME ZONE data to use the latest time zone file shipped
DOC>   with Oracle.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
SQL>
SQL> Rem Set errorlogging off
SQL> SET ERRORLOGGING OFF;
SQL>
SQL> REM END OF CATUPGRD.SQL
SQL>
SQL> REM bug 12337546 - Exit current sqlplus session at end of catupgrd.sql.
SQL> REM                This forces user to start a new sqlplus session in order
SQL> REM                to connect to the upgraded db.
SQL> exit

Export functionality doesn't work properly in reports post upgrade to EHP1

Dear Experts,
We have recently upgraded our BI system to EHP1 SP 7. Pre-upgrade the export functionality (to excel or pdf) was working fine, however post-upgrade in few reports we have encountered some issues.
In a couple of reports the exported excel is blank, in some reports, few web items are displayed properly but others not and in some reports exported excel or pdf is as it was pre-upgrade.
Could you please suggest any note or any solution which could fix this issue?
Thanks!
Edited by: IlaSAP on Apr 14, 2011 10:01 AM

After further analysis I find that the issue happens with only those reports in which export to excel/pdf is done using a webitem which is hidden in web template. If the web item is made visible the data is exported to the excel/pdf and if hidden again it again results in blank excel/pdf.
Please suggest any solution to this issue.

Query running for long post upgrade to Oracle 11g from 10g

The below query is running for a very long time post upgrade of database from 10g to 11g.
SELECT default_supplier
FROM (SELECT pv.vendor_name || '-'
               || pvsa.vendor_site_code default_supplier
          FROM mrp_item_sourcing_levels_v mislv,
               mfg_lookups ml1,
               mfg_lookups ml2,
               mfg_lookups ml3,
               mtl_system_items_b msib,
               po_vendors pv,
               po_vendor_sites_all pvsa
         WHERE msib.segment1 = :b1
           AND msib.organization_id = :b2
           AND mislv.inventory_item_id = msib.inventory_item_id
           AND mislv.organization_id = msib.organization_id
           AND ml1.lookup_type = 'MRP_SOURCING_RULE_TYPE'
           AND ml1.lookup_code = mislv.sourcing_rule_type
           AND ml2.lookup_type = 'MRP_ASSIGNMENT_TYPE'
           AND ml2.lookup_code = mislv.assignment_type
           AND pv.vendor_id = mislv.vendor_id
           AND pvsa.vendor_site_id = mislv.vendor_site_id
           AND pvsa.vendor_id = mislv.vendor_id
           AND ml3.lookup_type = 'MRP_SOURCE_TYPE'
           AND ml3.lookup_code = mislv.sourcing_level
           AND mislv.sourcing_level =
                  (SELECT MIN (sourcing_level)
                     FROM mrp_item_sourcing_levels_v
                    WHERE inventory_item_id = msib.inventory_item_id
                      AND organization_id = msib.organization_id)
        UNION
        SELECT ood.organization_code default_supplier
          FROM mrp_item_sourcing_levels_v mislv,
               mfg_lookups ml1,
               mfg_lookups ml2,
               mfg_lookups ml3,
               mtl_system_items_b msib,
               org_organization_definitions ood
         WHERE msib.segment1 = :b1
           AND msib.organization_id = :b2
           AND mislv.inventory_item_id = msib.inventory_item_id
           AND mislv.organization_id = msib.organization_id
           AND ml1.lookup_type = 'MRP_SOURCING_RULE_TYPE'
           AND ml1.lookup_code = mislv.sourcing_rule_type
           AND ml2.lookup_type = 'MRP_ASSIGNMENT_TYPE'
           AND ml2.lookup_code = mislv.assignment_type
           AND ml3.lookup_type = 'MRP_SOURCE_TYPE'
           AND ml3.lookup_code = mislv.sourcing_level
           AND ood.organization_id = mislv.source_organization_id
           AND mislv.sourcing_level =
                  (SELECT MIN (sourcing_level)
                     FROM mrp_item_sourcing_levels_v
                    WHERE inventory_item_id = msib.inventory_item_id
                      AND organization_id = msib.organization_id))
From the trace files, we see that the issue is with the seeded view, mrp_item_sourcing_levels_v.
Need pointers for fixing the performance.

The ETRM says this about the view:
***** Warning: Oracle Internal Use Only *****
Oracle Corporation does not support access to Oracle
applications data using this object, except from standard Oracle Applications programs.
which is a powerful suggestion that you should not be addressing this view directly. Looking at the source code for the view, it has a bunch of UNIONs that may prevent view merging, and all the queries have loads of hints coded within them. So really, there is little you can do about this.
It looks pretty simple to re-write your query to avoid addressing this view, you are using it only to retrieve a couple of columns. If you look at the source code for the view you'll see that you can get them easily without going through the view.
John Watson
Oracle Certified Master DBA

Error in Infopath document merger, post upgrading to sharepoint 2013

Hi all,
Post upgradation of sharepoint portal to 2013, infopath document merger is not working for a portal.
Assuming the error or compatibility issue with earlier infopath template 2007, created the new template; still error persists.
Attaching herewith the error for reference.
Looking for the resolution of it, in case somebody had faced this & cracked it.
regards,
Sandip

Hi,
According to your post, my understanding is that you failed to merge documents in a SharePoint Library.
To merge forms in a SharePoint Library, we need programmatically effort. Please check whether you Create Custom Merge correctly, refer to the following reference
http://msdn.microsoft.com/en-us/library/office/ee526363(v=office.14).aspx
Regarding InfoPath product, I suggest you also open a thread at
http://www.infopathdev.com/
I believe at that forum, more people in expertise in InfoPath may help you regarding this.
Refer to Merge multiple InfoPath forms:
http://office.microsoft.com/en-in/forms-server/merge-multiple-infopath-forms-HA010211945.aspx
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

ISE 1.3 Upgrade LDAP Issue

We recently upgraded to 1.3 and everything seems fine except that we noticed that the catalyst switches we use AD authentication through ISE for stopped dropping us automatically in enable mode. I did rejoin the device to AD as required post upgrade and have since unjoined and rejoined. When I run the test user option for the AD Identity store I get an error saying its unable to fetch LDAP attributes, see attached. There is also a similar error in the syslog anytime a user logs into the switch. I went back on the syslogs and these errors were not happening until the upgrade. I am assuming this somehow correlates to my issue. Anyone else experienced this post upgrade? Thanks.

Are you using LDAP or native AD join ?
There are some issues with LDAP and quotes in the group names, which is not supported. I also have had issues with 1.3 and using comma and users names, so something like Doe, John. is not possible as the name of a user in AD.
As for native AD, i have not had any issues with ISE 1.3

KE30 Post upgrade unicode issue in E-SECAMG-ELI.

Similar Messages

Maybe you are looking for