KE4J -COPA error for costing key2

Hi,
We use common material type 'ZMAT' for normal Finished goods and configurable Finished material.
i created 2 costing keys and assigned respective costing variants in COPA as under
001 - zpc1 - Standard costing
002 - zpc2 - sales order costing - configurable material
Further i assigned in KE4J as under
10  F     ZMAT       002    001
cost component split works fine for configurable material but for normal FG it encounters error message 'KE292'
however if set KE4J as
10  D   ZMAT    001   002
then it works fine for normal material that is cost component split is derived properly and also no error occurs for configurable material but there is no cost component split for this material.
Is that something i am missing here. Also why system get hard stop in 1st case and doesn't look for costing key 2.
Regards,
At
Edited by: Mr. Atu on Jun 16, 2011 10:19 AM
Any suggestion  - Ajay or professional collegue

Hi
It seems earlier the check box was ticked for "Issue error msg if no cost estimate found"... It was removed later on.. Is that so?
If you have created a SO / Billing doc when the tick was off, it cant give you the error message
I believe right sequence is 002 followed by 001...
In 002 - Tick the exclusive access.. DO NOT tick "Issue error message if not cost estimate found"
In 001 - Tick the :Issue error message if not cost estimate found
This should work in my opinion
Another option., You can also use KE4H and assign costing keys to Individual Material, if the no of mats are not much.... i.e. Say, For Configurable Material, you can assign costing keys to individual Products and for the rest of the materials use KE4J
Last option is to change the Mat Type of the configurable materials... For this, both the material types should be assigned to same valuation class so that you will be allowed to change in the Live System... In future, create all config materials under new material type
br, Ajay M

Similar Messages

  • MIRO Cost Element error for Cost center

    Hi,
    When i am doing MIRO - there are some price variances. System is giving the error to maintain the Cost center for that price differance cost element.
    But i have already maintain the Cost center for that Cost element in OKB9 Transaction. Why the system is asking for Cost center assignment again?
    Kindly help me
    Thanks
    Sunil

    Hi Sunil,
    Maintain the OKB9 settings with valuation area mandatory and dont give business area in the sub-sequent screen. Maintain only Valuation area and Cost center. It will not give any error and it will pull the cost center from OKB9.
    Thanks
    Kishore

  • COPA ISSUE for Cost Splitting of material

    Hi ALL,
    My client is having some new requirement in COPA for the Promotional items. As they always create new material code for Promotional item which will be combination of more than 1 material sometimes it will be created with the combination of 3/4/5---10 materials.
    Now they create seperate Material code for the same. Clients wants to flow the values for the Promotional item to COPA reporting at the parent level i.e. Promotional item and at the Child level also i.e. used material componants for promotional item.
    They wants Both level Revenue/Qty/Cost everything to be flowed to COPA. Now they will create sales order for the promotional material and it will have the all values related to promotional material.
    Is there any solution for the same to be displayed in COPA reporting in SAP.
    Thanks & Regards
    Sagar Chinchkar

    Hi
    Review this thread...  COPA alternatives for posting kits at header(real)&subitem(statistic) level
    There is one solution by me and another by Nikolas... Review both and you can make a choice
    br, Ajay M

  • No COPA document for Cost of Goods Sold

    I am using both account-based and costing-based COPA.  All transactions from SD billing and FI are posted to COPA. However, document type WL (goods issue/delivery) does not create a profitability analysis document even if the profitability segment in the accounting document is filled up with values for the goods issued.
    I have also assigned condition type VPRS as a value field in KE41.
    What should I do to post the cost of goods sold to COPA?
    Thanks,
    Agnes

    Hello Agnes,
    As far as Account-based goes, you do not need value fields, as account-based uses GL accounts to post in CO-PA. So, there is no need to do mapping in KEI2.
    KE4I and KEI2 should not have the same mapping.
    It is important to keep in mind that Cost-based uses value fileds, and that COGS gets posted at time of billing (whereas FI gets the COGS at time of Goods Issue).
    In Account-based, GL accounts are being used, and COGS is posted in both FI and CO-PA at the same time, that is at Goods Issue.
    Hoping this helps!
    Sylvain

  • KO88 - Error when settling for Cost Center AND Auc for the same Internal Or

    Hi Experts,
    We need to configure Investment Internal Orders that could settle to both Cost Center and Auc, but each assignments with different Source Cost Elements
    We did the following:
    1. Created Auc Class
    2. Created Investment Profile "IMOBIL" and assigned to Auc Class, flagging Auc
    3. Created Allocation Structure "CV" with two assignments:
    01, Source = Cost elements 7000000000 to 7999999999, receiver AUC "by cost element"
    02 Source = Cost elements 4000000000 to 4999999999, receiver CTR "by cost element"
    4. Created Model Order, filling the Investment Profile IMOBIL created in step 2.
    5 Created Settlement Profile ZCV0001, assigning Allocation Strucutre CV, allowing CTR and AUC for receivers, default receiver is "FXA", doc type "AA".
    6 Created ORder Type CV01, assigning Settlement Profile ZCV0001.
    When I post only for Asset Expenses (Source Cost element 7, Assigment 01), the settlement through KO88 correctly settles to AUC, and also creates the settlement rule for cost center (i'm using the strategy to create from Responsible Cost Center).
    But when I post for Asset Expenses (cost elements 7, receiver AUC) AND General Expenses (Source Cost element 4, receiver CTR), KO88 generates an error KD506, saying that for Assigment 02 - AUC I didnt define a settlement cost element.
    1. Assignment 02 is not AUC, is CTR;
    2. I flagged "by cost element", so I don't need a settlement cost element. And also, I was able to post to AUC when the source posting was only for cost element 7.
    Did you face any problem like this?
    I cannot find out what is the missing configuration, or if it is a program error...
    Kind Regards
    Mayumi Blak

    Hi Ajay
    I already created Source Structure and assigned to my Setllement profile (so I assigned Allocation Structure AND Source Structure).
    I don't understand when you say that I need to assign the Source Sutrcture in each rule....because the Source structure is in the Settlement Parameters valid for both rules...
    When I post to Asset Expenses only for the internal Order, the 2 rules (CTR and AUC) are created when I run KO88 (but only AUC rule is settled). This is OK.
    The problem is when I post for both General Expenses AND Asset Expenses, the system is not recognizing that I have 2 source structures, neither is findind that for CTR AND AUC the Settlement cost elements are the original cost elements.
    I'm thinking about changing message KD506 to warning, do you know if this can help?
    Kind Regards
    Mayumi Blak

  • COPA derivation for thecombination of Cost center and Cost element/GL accou

    Hi Gurus,
    In COPA derivation using KEDR i am trying to make a derivation for the
    combination of Cost center and Cost element. Here i got following problems
    • While posting FI document using t.code FB50 system not automatically
    updating the fields Cost center and cost element in Profitability
    segment. Hence system not posting COPA document. How can i make this
    derivation? Is there any note should i apply regarding these.
    • How can i create cost element as characteristic.
    • If i configure derivation for the combination of Cost center and cost
    element will it be posted with copa document for postings or automatic
    postings from MM,HR and FI
    Pls provide me solution at the earliest.
    Thanks and Best regards,
    Dhanumjaya.Ranga
    Mobile: - 919940093579
    Mail : [email protected]

    Hi Murali
    Thanks for update
    I explain my req clearly
    For me segment is Distribution channel field (EXPORT and DOMESTIC)
    If GL account is 1000-2000     always                      Export
    If GL account is 2001-3000    and Cost center is     X then Export.
    If GL account is 2001-3000    and Cost center is     Y then Domestic.
    Based on above REQ i am making derivation using KEDR T.code.
    These postings should work for all modules postings such as MM, HR also.
    Actually this should work automatically and after saving the transaction we should have copa document also.
    But problem is in source fields of derivation we have GL account (HKONT) and Cost element (KSTAR). I am making derivation using either of these.
    But after posting document system not giving COPA document.
    I found the reason is  at GL postings we are giving input to GL account (HKONT) but we took in KEDR source field as GL account (SAKNR). GL account (HKONT) is not updating GL account (SAKNR) field in PSEG screen in Fb50. Even i try with cost element (KSTAR), GL account (HKONT) is not updating this in PSEG screen in fb50.
    If GL account (HKONT) updates either GL account (SAKNR) or cost element (KSTAR) at the time of posting FB50
    Or
    If we have the field GL account (HKONT) as source field in KEDR i hope my problem
    Get solved.
    If you want further info pls give me your mobile number then i ll call you

  • Error saying cost center/EAT007 validity exists only for 2009

    I am trying to upload the HR details from Non SAP to SAP for 2010, using an interface from T.code se38, I am getting an error saying 
    "Master record for cost center(number)/ EAT007 exists only for 2009".
    When I see the cost center validity in KS02, its validity is from 01.01.2009 to 12.31.9999.
    Could anybody answer this.

    Hi Abhishek,
    I am trying to upload the time sheets of the employees from other software to SAP using the Tcode SE38,
    Later from HR to Co we are using CATs (Cat2 and CAT7) to transfer the data. Time time sheet contais the details of the sales order against which they have spent time, their time consumption for providing services and also the activity type they have performed.
    In SE38, while I am trying to upload the data it shows an error saying "Master record for cost center/EAT007 exist only for 2009".I am trying to upload the data for 2010 Jan to Aug.
    When checked, the Cost center's validity in our system is from 01.01.2009 to 12.31.9999.
    Please assist.

  • Error in cost calculation for production order

    Dear All,
    I got error of cost calculation while release of Production Order due to price of some material is not mantain .
    What will happen if I release , save the Order with error & do Good Issue ???
    Ishwar

    Dear Ishwar,
    Check the log's created for costing and rectify the same.
    I feel its better to rectify the cost related errors and then release the production order and proceed to Good's Issue.
    Check whether there is a MAP for all the Raw-materials and an origin group in costing 1 view.
    The Finished product must be having a standard cost estimate that's valid for the current period.
    Revert back in case of any more help needed.
    Regards
    Mangalraj.S

  • Copy planning for cost center Runtime error

    Dear Gurus,
    I am running KP97 to copy planning for cost center.
    but I got following runtime error:
    ===================================================================
    Runtime Errors         DYN_CALL_METH_CLASS_NOT_FOUND
    Exception              CX_SY_DYN_CALL_ILLEGAL_CLASS
           Occurred on     07.01.2009 at 13:21:25
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLGUMD " had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_CLASS',
    was neither
    caught nor passed along using a RAISING clause, in the procedure
    "USER_REFRESH_RE_EA" "(FORM)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    Class "CL_REEX_COPL_MASTERDATA_CHECK" was chosen during dynamic method call,
    but could not be found.
    =====================================================================
    can anybody give me a hint how to solve the problem?
    B.R.
    George
    Hi all, I searched the SAP notes, and found there is one note NOTE_0000632335 related to copy planning, I installed the note by TCode snote. the KP97 can run now, but for the IDES controling area 1000, I tried to test run copy version 0, period 1 to 12 from Fiscal year 2003 to 2004.
    there are many records with error.
    shall I ignore the error , unselect the test run and continue?
    does anyone have similar experience with IDES R/3 4.71? why cannot I carry out all steps in online document for IDES?
    B.R.
    George
    Edited by: George Pan on Jan 7, 2009 11:39 PM

    Hi I checked the error with copying plan data. it's all because of 'plan data already exists'.
    so I just ignore the error and continue.
    thanks!
    George

  • Error message at the time create new Hierarchy for Cost Centers (OKEON)

    Dear Experts,
    we have create new company code with reference to old company code. at the time  create new Hierarchy for Cost Center with t code OKEON system given the error message "Overlapping intervals or identical values have occurred".
    we have already checked the duplicate entry but not found the same.
    Please help.
    Regards
    BK GAIKWAD

    the long text to the message is:
    Diagnosis
    You want to use cost center together with activity type . For this combination, however, no master data record was created in fiscal year . The record is defined in CCA during activity type planning.
    System Response
    Procedure
    1.Create the master data record.
    Activity type planning
    1.Or, check your entries.
    I think you should discuss it with your functional consultant

  • Dont want COPA doc for credit memo billing in costing based copa

    Hi,
    We are in costing based COPA
    Created one mis sale account with CE 1 as we dont want to drive to COPA
    when i did billing the credit memeo am getting Profitability segment for primary cost element not advisable.
    we have not mapped the Condition type to COPA field also.
    Can you help us how to resolve this.
    We need billing accounting document with out COPA document.
    thanks,
    Sudha

    Hi Sudha,
    The best way will be to reset the fields in transaction KE4W if you do not want a COPA document for a particular billing type.
    Regards,
    Abhisek

  • Error Activity type 502000 not set up for cost center 1000 cc111

    hi all
    While creating a work center (CR01) I need to enter a cost center and activity type for machine hours. However, while entering the activity type the following message appears:
    Message no. CR 061
    You are attempting to assign activity type XXXX to the work center. However, this activity type has not yet been set up in controlling area 1000 for cost center xxxxx.
    while creating the activity type in KL01 i have already given * in cc category so it should go for all cc
    What could cause this problem?
    Thank you in advance,
    Kind regards

    Hi,
    Check whether the activity type is maintained at the correct controlling area via KL03. If not, then create the activity type (KL01) in the corresponding controlling area.
    Regards,
    Darrel

  • COPA Error

    Hi COPA Guru
    I am having this issue. Pls some one can get back to me
    Diagnosis
    In Profitability Analysis, an attempt was made while valuating with material costing to read for material "2" a standard cost estimate released on posting date "01.04.2011".
    The system has discovered that there are no error-free standard cost estimates released in plant "NW01" on the specific date "01.04.2011" for material "2".
    The material cost estimate is accessed according to the CO-PA Customizing settings for costing key "Z01" under Define Access to Material Costing.
    Display Cost Estimate for Material
    Display Material Cost Estimate without Quantity Structure
    System Response
    It is not possible to process the document further.
    Procedure
    Check your system settings.
    Thank you

    Hi
    Thats why it is always recommended to have 2 Costing keys so that one of them acts a fall back option
    Create a 2nd costing key Z02 and choose "Current Cost Estimate according to entry in Material Master" instead of 2" a standard cost estimate released on posting date
    Assign this Costing Key against your Mat Types in KE4J or KEPC (you would have used one of them)
    br, Ajay M

  • Billing data xfer to Accounting/COPA error "Std. Price"

    We are/were having a problem with Invoices being released to Accounting.  We received the K/834 error for no Std. Cost est. could be found for material.
    We had some materials which (1) did not have a Costing view, or (2) had nothing in the Current Planned price on Costing 2 view of Matl. master.
    The bigger question is: why is SAP allowing the original Sales order to be be created and delivered, and the billing document to be created, before blocking the creation of Accounting docs?  Since we have COPA activated, wouldn't SAP have some way to prevent a sales order from being created if Std. Costing data is not correct or missing?  Is there something in COPA or FI config that needs to be activated in order to prevent this problem from getting as far as the SD billing doc?
    We originally had our Costing Key set to "Release standard cost estimate matching goods issue date", but when the Invoice could not be released to Accounting/COPA, we could not just do a costing run for the material in question since the date of the costing run/std. cost was greater than the Goods Issue date.  We had to change the costing key assignment to just look at the "current std. cost estimate entry in mat. master". 
    We just want to prevent Sales order from being created if the material is not correctly costed.  Any ideas?
    Thanks.
    Scott.

    No longer needed

  • KB15N_No adjustment account found for cost element Message no. K5112

    When I am trying to post Manual Cost Allocation through TC KB15N with the following input data I am getting the following error message and the same could not be posted.  Kindly advise.
    Screen Variant used: 01 SAP Cost Center
    Input Type: List Entry
    Item No.1
    Sender Cost Center : 3402100942
    Cost Element: 6200001
    Amount : 62,201.56
    Receiving Cost Center: 3405100945
    First four digits represent profit center code.  If first four digits are equal the above error is not coming. But posting is needed with different profit centers.
    No adjustment account found for cost element
    Message no. K5112
    Diagnosis
    Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
    System Response
    No adjustment account could be determined for cost element  in company code SCCL.
    Procedure
    Maintain the standard or enhanced account determination for transaction KAMV. Information on maintenance can be found in the program documentation.
    Execute

    Hi all,
    I face the issue like this but with transaction KOAP - Plan settlement
    But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement"  without error
    So, How this error come to me?
    And how I can fix it?
    Thanks all!

Maybe you are looking for