KE5Z PCA Line Item report
Hi All:
When KE5Z runs, it shows WBS in the report. But when i put a filter on this report on the WBS, it looks like the characters are getting truncated/cut in length.
Do you know why thats happening?.
thanks
Brian
If you assign the profit center in the document or it will be posted dummy profit center automatically,based on cost objects assignment to the profit center.kinldy check once again in the profit center master data.If you posted the document pertaining to the profit center, it shows in the report KE5Z.
Please check in the master data and document.
Thanks and regads
Sivakumar.Subbiah
Similar Messages
-
KE5Z - Actual Line Item report freezes before displaying the result
Hi,
We have a situation. We have a Z report in Finance. We have linked KE5Z to this Z report using the Report Painter along with 15 others. When we run the Z report it works fine and displays result. In the displayed result, if we futher drill down for the actual line items for a particular profit center, system freezes. It does not display any result even after a long wait.
We did our analysis and found that the program takes the profit center number range from the least available in the profit center group to highest available in the profit center group and starts checking for every line item in it. This happens when the profit center group has more than 50 profit centers in them. When we run KE5Z tcode individually, it runs fine.
We are not sure how to go about finding a way out of it.
Has anyone faced such issue? Do you know of any OSS note that can help us? or If anyone of you can think of a solution or a way to go about it?
Your help on this is much appriciated.
Regards,
Mukund SHi,
Any pointers to this will be appriciated...
Regards,
Mukund S -
Profit center line item report
Hello All,
A sales order is created with reference to a service order, now when I see Profit center line items, the function area available in Service order is differ from the function area displaying with sales document number in profit center line item report. Can anyone please tell me where could be the problem.
Full points will be awarded for the answer.
Thanks & Regards
SriniHi,
what SAP release do you have ?
Normally the derivation of the functional area is made with the following logic:
1) manually entered
2) FI-Substitution (calling point 5 or 6 since ERP2004)
3) cost center
4) cost element
Please see also SAP note 106180 of how to correct wrong functional areas in PCA.
Best regards,
Andreas -
Profit center - actual line items report
< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
hi,
i am trying to excute ke5z, profit center actual line item report. it does not show any values even if i am running it wide open, I am testing this in our quality client, we have data all of 2008 posting to profit centers. i
is there some kind of config involved in this.
please let me know if anyone has an idea.
thanks.Are you absolutely sure there are no values in any of the fields in selection screen? Recheck if any of the multiple selections (arrow at the end of each field) is active? Are you running it for record type 0 (actual) - you did say you are running it wide open, but I am just trying to reconfirm.
Just another think that you could check - when you are in the initial screen of KE5Z, go to Extras -> Data source (F5) from the top menu and make sure Database checkbox is checked.
Edited by: Srikanth Tamma on Sep 22, 2008 6:46 PM -
How to down load GR55 line items report
Hi,
Is it possible to down load the actual line item report (not the totals) from GR55 report in ECC 6.0? How can i down load it?
I know that we can double click on each line and get the actual line items. But is there any way i can down load all the line items at a time?
Thanks for your help.
Kind Regards
Umapathi G
Edited by: Umapathi Naidu G on Dec 14, 2010 11:50 AMHi
Then better to create an account group in PCA and execute the line item reports rather than GR55 reports
I guess the std way to get line items from Gr55 report is what you are doing now and certainly that cant be changed in my opinion... One should not be rigid for one extra click of a mouse
Regards
Ajay M -
**URGENT** - Vendor Line Item Reporting
Dear Gurus,
Need some URGENT help with regards to Vendor Reporting?
Our business has requested for a Vendor Line Item / header Report, which will display ALL Vendor Items NET (before tax).
At the moment our business it manually taking out Tax in FBL1n (Vendor Line Item Report).
Please could you kindly let me know if there is ANY report in SAP which displays the Vendor Items NET & GROSS??
Thanks Very Much
RICK
Edited by: Rick Desilva on Apr 22, 2008 4:00 PMHi Shridhar,
All I want is a "net column" - Which will display the vendor invocie amount - BEFORE VAT (Tax).
So on FBL1N or Another SAP-Vendor Report what I need is a
Net Amount column and a Gross Amount Column.
I hope this makes sense and someone can assist....
Thanks & Regards
RICK
Edited by: Rick Desilva on Apr 23, 2008 9:36 AM -
Asset Balances & Cost Line items Report
Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards, -
WBS Element on AR/AP Line Item Report
Hi All
When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
Thank you
Rukshanahi,
If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
For Ex
Expense 1 Dr 1000- WBS 1
Expense 2 Dr 1000- WBS 2
Expense 3 Dr 1000- WBS 3
Vendor A Cr 3000
Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
Thanks and regards
Praveen.J -
AP Line-Item Report for State Auditors
Dear Members,
I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
Check Number PAYR-CHECT
Voucher Number BSEG-BELNR
Check Date PAYR-ZALDT
Voucher Date BKPF-BUDAT
Vendor Number LFA1-LIFNR
Vendor Name ADRC-NAME1
Vendor Street Address ADRC-STREET
Vendor City ADRC-CITY1
Vendor State ADRC-REGIO
Vendor Zip Code ADRC-POST_CODE1
General Ledger Acct No BSEG-HKONT
Purchase Order Number BSEG-EBELN
Tax Status Code BSEG-MWSKZ
Taxable Amount BSEG-HWBAS
Exempt Amount BSEG-MWSTS
Tax BSEG-MWSTS
Tax Accrued BSEG-MWSTS
Total Invoice BSEG-DMBTR
I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
Thanks in Advance for help and quick reply is much much appreciated.
Best Regards
RC0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table. -
COPA line item report, Number format -output type - object list(ALV).
Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
RegardsHI
What t-code you are using to write this line item report ? -
Line item report on secondary cost element (cat - 21)
Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank youHi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose -
Line item report with Customer number
Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period. -
Create AP/AR line item report for parked items
Dear all,
Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
Does anyone know if this is actually possible?
many thanksHi,
by using of TCODE. FBV3 it is displaying parked documents
based on document type.
K.Satish -
Hi,
What is the t.code to see SKF line item report
Bye,
RameshHi,
I an the report the total value are appearing and when i am selecting the actual line items the message is "Assign a receiver report to the report". What should i do?
Bye,
Ramesh -
Vendor line item report in New GL
Hi
We have activated New GL. We need vendor line item report based on GL view. FBL1n provides report based on entry view. But we need simillar to FBL1n based on GL view. There is a standard report S_AC0_52000888 which provides vendor line item doucment wise with New GL characteristics such as profit center. However, this report does not provide additional information such as posting date, due date et.c which is available in FBL1n. Hence, we are unable to monitor vendor accounts at profit center level.
Can anyone suggest how to add additional fields in the above report or any other report available for the same.
Thanks
S.RadhakrishnanhI
Thanks for the reply.
As per your suggestion, we need to bring GL view parameters from FAGL* tables. I need clarification here:
1. In our case, single line item in BSIK may correspond to multiple profit centers and hence multiple line items in FAGL* tables.
2. Users run the report for multiple vendors ( beig range) with their profit centers as selection criteria.
3. In the above case, we need to select all the line items for that vendor and go to FAGLFLEXA and select all line items and delete all line items not pertaining to the profit center entered as selection.
4. The above process would be time consuming since all the open items will be selected and then delete all those items which are not required.
5. Else, can we select the items from FAGLFLEXA directly for the profit centers entered and bring additional information from BSIK table. Since vendor accounts are not there in FAGLFLEXA, it would be cumbersome and time consuming.
6. Which of the above approach would you recommend.
7. Is it possible to modify the ACO report so that we can add additional information such as posting date, due date etc.
Regards
S.Radhakrishnan
Maybe you are looking for
-
Updated to loin now i can't drag and drop videos
i update my mac mini to loin now i can't drag and drop vidoes or songs to a flie or to a external hard drive
-
Why can't i sent a picture to my printer via email?
i have a photosmart premium 410a. when i try to email a photo to the printer, it doesnt seem to want to print it. if i email a document, it works fine. Whats going on? Also, when I try to print a photo from my iPhone using the AirPrint function, it o
-
Why does my iPad2 suddenly keep losing connection on facetime?
Why does my iPad2 suddenly keep losing connection on FaceTime and tries to constantly reconnect?
-
Changing vendor number in BE PO
Hi all, As you know, if you need to change the material code when the PO is being transfered to the R/3 BE system, you can use the B31I_MATERIAL_READ driver to adjust/change the material code number. Now, we need to change also the vendor number whe
-
I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls