Keep asking me to restart!!!

Within a year my Ibook has trouble me with exchanged of new Logic Board.
After few months, my touchpad start to not reponding, somehow it ended by itself.
However, since 2 weeks ago, it keep asking me to restart with a grey screen display with few different languages.
Tried hardware test, found no problem, reinstall with original Panther with the it, the problem still on.
Even worst, this morning the whole system is not able to startup, aske me to mac-boot or shut-down. Called to apple support, tried reset-all still the same.
So I sent to Apple centre near by. Problem never resolved.
Anyone has any idea that i can DIY to solve this problem.
My Ibook is back because I requested for..
Help?

Hi, Huplim. Welcome to the Discussions.
1. You wrote: "However, since 2 weeks ago, it keep asking me to restart with a grey screen display with few different languages."If you are seeing this message, that indicates a kernel panic.
If so, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
2. You wrote: "Even worst, this morning the whole system is not able to startup, aske me to mac-boot or shut-down."See "To continue booting, type 'mac-boot' and press return" Message.
3. You wrote: "So I sent to Apple centre near by. Problem never resolved."If the advice above does not sort it out, you need to have the Mac serviced. You may want to speak to the manager of the "Apple centre" to which you took your iBook.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

  • Hello I am trying to download the latest itunes and it keeps asking me to restart the mac and I do but nothing happens. Can someone help? Thankyou

    Hello I am trying to download the latest itunes and it keeps asking me to restart the mac and I do but nothing happens. Can someone help? Thankyou

    Hi Chris, I know where to check for updates but after I agree to terms conditions etc it asks to restart the computer before it can start downloading. I do that and it keeps repeating the process?

  • IMac keeps asking to be restarted

    My iMac keeps asking me to re-power up. After I do this, the screen comes back with the same request to re-power (restart) the computer.
    Any advise on simple trouble shooting I can do at home.
    Thanks.

    Welcome to Discussions - a couple of things to try are resetting the PRAM, also the SMU:
    1. Turn off the computer by choosing Shut Down from the Apple menu, or by holding the power button until the computer turns off.
    2. Unplug all cables from the computer, including the power cord.
    3. Wait 10 seconds.
    4. Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    5. Let go of the power button.
    6. Press the power button once more to start up your iMac.
    You can also run Disk Utility to check your drive:
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.
    And last, but not least, use the Apple Hardware Test on your install disc.
    Do let us know what you find out,

  • Computer keeps asking to be restarted after update

    Its an old G4 450mz that is running OSX and has been updated regularly with each patch that has come out. For some reason after todays update it keeps wanting to be restarted. The message I get after each restart is that its been updated and needs to be restarted. Every restart gives me the same message. Is there a way out of this ? or a way to revert back to what I had previously ? Not much of tech guy just a mac user
    Help me Obi Wan, your my only hope.

    Alis1968, welcome, bootup from the install CD (C key held down) and once the disk mounts (X window) open Disk Utility from the Main Menu under Installer. Choose your drive in the left column then select First Aid, now run the Repair, if it does not repair run it again. Now select the startup volume (with the OS) and run the Repair Permissions, quit Disk Utility.
    Now go back up to the Main Menu under Install/Change Startup Disk and select your startup volume then Restart.
    Now do a PRAM reset on startup.....
    1. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    2. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    3. Release the keys.
    Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.
    If this does not solve the issue then take a look here.
    Joe
    ps. This is the 10.3 and later section, maybe that is why no one has answer your question until now. Your post does not say, but your profile does say 10.4.
    Power Mac G4 Gigabit Ethernet   Mac OS X (10.3.9)   1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000

  • I downloaded 8.0.1 onto my server and it keeps asking me to restart my computer and I have done that several times . Help

    ''duplicate - locking - https://support.mozilla.com/en-US/questions/900575''
    I upgraded firefox to 8.0.1 on my server Windows 2003 v and now when I click on the icon which is not a fox and when I try to uninstall it tells me I need to reboot. I have done so many time

    What do you mean by "unlock my id"?

  • Keeps Asking To Restart!

    My Mac Mini (mid 2010) keeps asking me to restart and is returning this error code (MIGHT BE LONG!!):
    Error Report 3/13/12
    Interval Since Last Panic Report:  231872 sec
    Panics Since Last Report:          13
    Anonymous UUID:                    8F0AD4FE-FB32-4B6F-B20D-B4C136379173
    Tue Mar 13 23:15:49 2012
    panic(cpu 1 caller 0x2abf6a): Kernel trap at 0x015b1e7a, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x9c0c1dca, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x00000001, EBX: 0x00000000, ECX: 0x090be020, EDX: 0x090be004
    CR2: 0x9c0c1dca, EBP: 0x52b1b908, ESI: 0x00000001, EDI: 0x092c3004
    EFL: 0x00010246, EIP: 0x015b1e7a, CS:  0x00000008, DS:  0x090b0010
    Error code: 0x00000002
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x52b1b728 : 0x21b837 (0x5dd7fc 0x52b1b75c 0x223ce1 0x0)
    0x52b1b778 : 0x2abf6a (0x59e3d0 0x15b1e7a 0xe 0x59e59a)
    0x52b1b858 : 0x2a1a78 (0x52b1b870 0x6410 0x52b1b908 0x15b1e7a)
    0x52b1b868 : 0x15b1e7a (0xe 0x48 0x52b10010 0xae0010)
    0x52b1b908 : 0xb10d7b (0x90be004 0x92c3004 0x1 0x1)
    0x52b1b948 : 0x15aabff (0x90be004 0x92c3004 0x1 0x1)
    0x52b1ba28 : 0x15b2cae (0x90be004 0x92c3004 0x1 0x0)
    0x52b1bad8 : 0xb10a10 (0x90be004 0x92c3004 0x1 0x9c4774)
    0x52b1bb08 : 0x15abf1c (0x90be004 0x92c3004 0x1 0x1)
    0x52b1bb58 : 0x15d0396 (0x90be004 0x92c3004 0x1 0x1)
    0x52b1bb98 : 0xb513c9 (0x90be004 0x9446804 0x52b1bbcc 0x0)
    0x52b1bc18 : 0x15cf803 (0x90be004 0x9446804 0x40 0x0)
    0x52b1bc58 : 0x15adbd2 (0x90be004 0x9446804 0x0 0x0)
    0x52b1bd98 : 0x15b4d09 (0x90be004 0x92c3004 0x552ed0 0x8e90d40)
    0x52b1bdf8 : 0xb0e258 (0x90be004 0x92c3004 0x0 0x0)
    0x52b1be38 : 0x9dde2b (0x90be004 0x92c3004 0x0 0x0)
    0x52b1bed8 : 0x553ec7 (0x0 0x8dae280 0x1 0x8192ac8)
    0x52b1bf28 : 0x552ea6 (0x8dae280 0x3 0x52b1bf78 0x584ef4)
    0x52b1bf88 : 0x552eea (0x8e90d40 0x0 0x800 0x1c03)
    0x52b1bfc8 : 0x2a179c (0x8e90d40 0x0 0x10 0x0)
          Kernel Extensions in backtrace (with dependencies):
             com.apple.nvidia.nv50hal(6.3.6)@0x1477000->0x188bfff
                dependency: com.apple.NVDAResman(6.3.6)@0x96e000
             com.apple.NVDAResman(6.3.6)@0x96e000->0xc5bfff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: Macmini4,1 (Mac-F2208EC8)
    System uptime in nanoseconds: 9158686193772
    unloaded kexts:
    com.apple.driver.AppleMCP89RootPortPM          1.11 (addr 0x12a5000, size 0x20480) - last unloaded 92403917052
    loaded kexts:
    net.telestream.driver.TelestreamAudio          1.0.5
    com.apple.driver.AppleBluetoothMultitouch          54.3
    com.apple.driver.AppleHWSensor          1.9.3d0
    com.apple.driver.ApplePlatformEnabler          2.0.2d1
    com.apple.driver.AGPM          100.12.31
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleMikeyHIDDriver          1.2.0
    com.apple.driver.AppleHDA          2.0.5f14
    com.apple.driver.AudioAUUC          1.57
    com.apple.driver.AppleMikeyDriver          2.0.5f14
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AppleIntelPenrynProfile          17
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.GeForce          6.3.6
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleIRController          303.8
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleSDXC          1.0.3
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AppleRTC          1.3.1
    com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleUSBOHCI          4.2.0
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleBluetoothHIDKeyboard          141.5 - last loaded 28204074668
    com.apple.driver.AppleHIDKeyboard          141.5
    com.apple.driver.IOBluetoothHIDDriver          2.4.5f3
    com.apple.driver.AppleMultitouchDriver          207.11
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.DspFuncLib          2.0.5f14
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.nvidia.nv50hal          6.3.6
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleHDAController          2.0.5f14
    com.apple.iokit.IOHDAFamily          2.0.5f14
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.NVDAResman          6.3.6
    com.apple.iokit.IONDRVSupport          2.2.1
    com.apple.iokit.IOGraphicsFamily          2.2.1
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.driver.XsanFilter          402.1
    com.apple.iokit.IOAHCISerialATAPI          1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.NVSMU          2.2.7
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.driver.DiskImages          289.1
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: Macmini4,1, BootROM MM41.0042.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.65f2
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9320325ASG, 298.09 GB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x06400000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8218, 0x06630000 / 7
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x06500000 / 2

    That suggests the problem is due to third-party software that's installed. Try uninstalling the Telestream software. Use the uninstaller that came with the Telestream software if there is one. Otherwise, follow the instructions below. In particular you want to remove the extension that was installed in the /System/Library/Extensions/ folder for Telestream.
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • Setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

    setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

    Hi marsano,
    Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
    * Right-click the icon and choose ''Run as Administrator''
    If that doesn't help then do a clean reinstall.
    # Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
    # [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
    # Run installer
    Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
    Hopefully this helps!

  • HT1338 The latest update for Mountain Lion OS X 10.8.3 keeps asking for Restart, but does not update.

    The latest update for Mountain Lion OS X 10.8.3 does not update.  Keeps asking for Restart but no update.

    Yup, I'm experiencing the exact same thing. 
    I (and many others) are experiencing the same or similar issues with the 10.8.3 update.
    I've sent an response to Apple but have not yet received anything back (yet). 

  • MBA 2011 keeps asking to restart

    Hi
    My MBA 2011 keeps asking to restart. I have done this so many times and it keeps asking me at the log in page.
    Can anyone help?

    If you're getting the restart screen that has several languages on it, that's a kernel panic. A kernel panic is usually, but not always, caused by a hardware issue, with memory the leading cause.  Since your MBA is a 2011 model, it's under warranty, so I'd take it to an Apple store for support.

  • My ipod keeps asking me to restore and when i do restore it just restarts and asks me to connect to itunes and starts again.please help its my sons bday and this is his present

    my ipod keeps asking me to restore and when i do restore it just restarts and asks me to connect to itunes and starts again.please help its my sons bday and this is his present

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My macbook keeps asking if I want to shut down, restart, etc...

    It just started, but my macbook keeps asking if I want to shut down, restart, etc...
    I've tried all the resetting advice I see online but nothing works...
    I have a macbook 2.1/Intel Core Duo - 4GB - 10.6.8

    My MacBook just recently today starts to ask me to shutdown/sleep/restart etc after 1 minute of idling. I've reset the SMC twice to no avail. I checked my power settings and everything else and nothing is out of the ordinary. I've looked online and other people have experienced similar problems. Just wondering if anyone have found a solution to this?

  • SQL2008 keeps asking for restart

    Hi,
    I'm trying to install SQL2008 RTM, but the installer keeps asking to restart the computer?
    Any thoughts?
    Yours sincerely,
    Henk Simmelink

    Hi Praveen,
    Thank you again for your assistance.
    The only thing that I do is after reboot is double click the setup.exe and then I click the Configuration Checker.
    In the log file is then written:
    2008-08-19 21:20:39 Slp: Initializing rule      : Restart computer
    2008-08-19 21:20:39 Slp: Rule applied features  : ALL
    2008-08-19 21:20:39 Slp: Rule is will be executed  : True
    2008-08-19 21:20:39 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetRebootRequired
    2008-08-19 21:20:39 Slp: Rule 'RebootRequiredCheck' results: IsRebootNotRequired=False
    2008-08-19 21:20:39 Slp: Evaluating rule        : RebootRequiredCheck
    2008-08-19 21:20:39 Slp: Rule running on machine: LAPTOPEIGER
    2008-08-19 21:20:39 Slp: Rule evaluation done   : Failed
    2008-08-19 21:20:39 Slp: Rule evaluation message: A computer restart is required. You must restart this computer before installing SQL Server.
    All other rules are succeeded or not executed.
    Under Add or Remove Programs there is no mention of a previous install of SQL-server 2008, so I can't undo it (anymore).
    That is all that I can find.
    Yours sincerely,
    Henk

  • Apple TV keeps asking my for my Credit Card verification code and I punch it in, still asks me for it, and restarted everything, went to my computer, checked the code, all is set, still can't rent a movie. Please help!

    Apple TV keeps asking my for my 3digit  Credit Card verification code and I punch it in, it still asks me for it, and went to my computer on iTunes store, checked the code, all is set and saved, go back to Apple TV still can't rent a movie, I still get the same Verification Required message without any further information after I punch in my 3digits. When I hit submit, the page goes back to the same place to type the code again, and yes the code is 100% accurate. I tried restoring the apple tv, every thing is up to date on all devices and signed in and out of my itunes store on my Mac, still no luck. Please help!

    This issue actually started a week ago... see: https://discussions.apple.com/message/23399558#23399558
    to determine if there are the same problems you are experiencing.  I have spent over 6 hours on this issue trying to isolate if it is a hardware, software, network, iTunes account, or Apple device issue.  My initial results indicate it is a software specific issue related to the Apply TV hardware device.

  • New Satellite L50-C - wont allow updates and windows 10 upgrade, keeps asking to restart

    Hi, hope someone can help:I picked up a new laptop yesterday with windows 8.1 installed and followed the prompts to upgrade to windows 10.  The computer downloaded what I presume were the updates for 8.1 to get it up to date before starting the windows 10 installation.  It has also downloaded the data for the windows 10 upgrade as I am now getting the prompt telling me the upgrade is ready to install.However, when I click on 'start the upgrade now' in the windows 10 upgrade box the laptop just restarts and boots back up to a windows 8.1 login.  Once logged into desktop Windows Update opens up and tells me that I need to restart to complete install of updates.  I click on the restart and the computer restarts but with no message telling me during the restart process that updates are installing as you might usually expect.  The boot-up then bring me back to the same point (login screen, then win8.1 desktop and Windows update again popping up asking for a restart).  I have followed these prompts and done several restarts thinking that it is working through bringing the updates in one by one however the update list doesn't vary when I check:  I ran the troubleshooter for update and got the following message: However even after doing this a couple of times I still have the same problem.  After reading up on these forums and elsewhere I tried running sfc/scannow (no issues detected).Can anyone help?  

    Which Satellite L50-C? There is a label on the bottom.
    Scroll down in the Troubleshooting report so we can see what's under Issues found.

  • Mail 7.0  keeps asking for Password on restart

    Only Mail keeps asking for my iCloud password. I have entered it into the password box (in Account Information, incoming server), and it seems to take it, but it empties everytime I close the window, and reopen it.
    This didn't happen before Mavericks. ICloud works fine, as do all the iWork apps. They have no problem getting to iCloud. It's just Mail that does for some reason.
    Any ideas?

    Hello there, Code_Wizard.
    The following Knowledge Base articles, although written for Mountain Lion offer some good pointers for troubleshooting your issue:
    Mail (Mountain Lion): If Mail keeps asking for your keychain password
    http://support.apple.com/kb/PH11785
    and
    Mail (Mountain Lion): If your password is not saved
    http://support.apple.com/kb/PH11775
    If you continue to experience the issue, you may also like to review:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • I think I might have downloaded malware and want to know if there is a program I can run on my computer to look for malware

    I was on a website and a tab with another website that looked sketch came onto my screen. I couldn't exit the page and a message appeared on my screen saying something about safeguarding my mac and in a panic I just clicked "Okay" because there were

  • Routine at the Infopackage level-Urgent

    Hi, My requirement is I need to write an routine at the infopackage level for the fiscal period which should have the low value as the current period and the high value as current period +12 months. For example. As per the system date the low value s

  • Mirror data

    Dear All report virsion 6.0.8.11.3 is it avaliable in oracle to run mirror item (revirsing the horizental coordinate not reverse reading) (it's used to make stickers interior a car) thanx all

  • Unable to swtich between mail accounts or messages - mail crashes

    After updating to 10.4.4 I have a new problem with mail. Mail opens and downloads new messages. The last mesage I read before this happened is highlighted. When I click on the next message in the same inbox or switch to a different inbox, mail crashe

  • OPSS authorization Logs

    Hi I have set the logger oracle.security.jps.dbg.logger to finest. And some of the log entries aren't making much sense to me like what is subjectresolver <JpsAbsSubjectResolver> <resolveSubject> [JpsAbsFilter.doFilter] Final jpsSubject = Subject: