Keep getting a grey screen with circle with slash at start up after force shutting down

My MacBook is fairly new (purchased in August 2012) and today it was running fine and began freezing... When this has happened in the past I have just force shut downed it, and it started up normally. This time around when I went to start it up I got the apple logo on a grey screen followed by a circle with a horizontal slash (like a do not enter sign).... tried to safe boot it and I got another grey screen but now with a folder icon. Please help!!!

Whoooo - if you have no backups (what were you thinking?) then hang on if you can and some wise soul may come across and give us a solution.
What you need to do is to repair your drive from an external. What happens when you do a 'Command+R' upon restart after the chime?
I also clicked on the stuff on the right and it is really dated! But current Mavericks' users will surely come along and address the issue. Until it is solved, please don't erase the installation, since you do not have a backup!

Similar Messages

17 MacBook Pro is not booting up. Won't get passed grey screen with Apple wheel spinning below.

17 MacBook Pro is not booting up. Won't get passed grey screen with Apple wheel spinning below.

You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
Clinton

Re iphoto: when I double click on a thumbnail i get e grey screen with exclamation mark..can't access my photos to edit, order prints etc

Was wondering if anyone can help...I am not very computer friendly but want to be able to edit my photos, use them as jpegs, order prints etc. When I double click on a thumbnail ( am presuming the thumbnails are the small photos ) I get a grey screen with an exclamation mark on it. I cannot drag the thumbnail onto the desk top it just pings back. This doesn't happen with all the thumbnails and has been a problem since we upgraded to snowleopard. I recently reinstalled photos from the memory card from my camera and they are alright. I am presuming that the old photos are stuck in there somewhere if only I knew the right buttons to press to get them out. Thanks, Jane Thomas

Easiest: Restore from your back up.
Otherwise:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

My macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

Mac OS X: Gray screen appears during startup - Apple Support

When I turn on my MacBook Pro I get a grey screen with a folder icon and a question mark. I can't the computer to boot up.

What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?

vickyfromosseo wrote:
What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?
Read this: A flashing question mark or globe appears when you start your Mac

Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.

My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it. I've tried Option key, and Control S keys and it still will not boop up. Can anyone help?

If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.

Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

On start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Grey screen with apple at start up on macbook pro but can play music ?

hi, i have my macbook pro not working properly, it start up but the grey screen with apple stay here and i can listen my music with the play touch. how i can shut it down with my keyboard witout make a force shut down.
thanks

hi, i have my macbook pro not working properly, it start up but the grey screen with apple stay here and i can listen my music with the play touch. how i can shut it down with my keyboard witout make a force shut down.
thanks

My MacBook won't start up. After turn it on I get a grey screen with an apple in center and a circle below with lines around it and a blank bar below that. How can I get it to get beyond this screen?

MacBook won't start. After I power up, I get a light grey screen with an apple in the middle, a circle with lines moving around it and a blank grey bar below that. It won,t get beyond this. Please offer suggestions.

I have the exact same problem and waited it out and got to my homescreen. Whateve the problem is fried my bluetooth and my trackpad. I tried starting it again and couldn't even get to homescreen, it stayed on the bluescreen with the wheel of death. So, I took it to genius bar today. I was informed that my logic board is fried and it needs to be replaced. $300 repair that I'm looking at...

My MacBook Pro will not boot up. I just get a grey screen with a "no entry" symbol and a spinning time icon. Any ideas as to how I can get over this issue?

Hi, I tried to start my MacBook Pro are 2 weeks and all I get is a grey screen with a grey no entry sign and a spinning timer. I have tried a reboot with shift cmd and v and it seems to be looping and referring to an external device. Only the power is attached. Can anyone provide advice on how to get past the grey screen? Many thanks.

Does the system automatically back up data?
No.
As you can getto the Recovery partition, you can at least verify your disk using Disk Utility. If it reports that repairs are needed, you can try to repair but I've found that nearly 100% of the time repairing the disk inevitably FAILS. You should be prepared to, 1) buy a new drive for your machine and, 2) buy a good (see here) enclosure for your damaged drive to try to recover data.
After you get everything fixed, use at least two backup methods to keep your data secure. See Most commonly used backup methods.
Clinton

My MacBook Pro will not start up. I only get a grey screen with the spinning wheel. No blue page appears and the grey screen remains. Tried starting with the Shift key but ineffective as well.

Can't get my MacBook Pro to start up. Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon. Apple Support online suggested starting with power button followed immediately with the shift key. Same results. Also tried power button with shift key, command, and V. Black screen appeared instead with lots of data language but still no starting. This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here? Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.

You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
Clinton

Brand new MacBook Pro doesn't get past grey screen (with spinning gear)

Hello,
I'm a new Apple customer - I bought a new 15" MacBook Pro during the Black Friday sale last week. Since purchase, I've installed the software I needed (Office, CS4) and have used it to browse the web and write emails.
Today when I tried to use it, I simply got to the grey screen with the Apple logo on it and the spinning gear device underneath - got absolutely no further.
I have done the following (running from mains adaptor - but the battery indicator is reporting 7 lights anyhow):
1. Boot from the OSX Install Disc, and run the disc repair utility. It reported no problems found. Restarted... same problem.
2. Boot holding down SHIFT to go into safe mode. Underneath the spinning gears, a progress bar filled up to 100% and then disappeared; leaving the grey screen, logo, and spinning gears. Nothing further.
3. Boot holding Option, P, R as per the manual to reset the PRAM. According to the manual there should have been a chime/beep - there wasn't. It just sits on the grey screen, logo, spinning gears. Nothing further.
Right now I've got a £1300 MacBook Pro less than a week old and it appears to have just packed up.
Am I missing anything here, or should I just return it?
Thanks,
Chris

Definitely take it back!
My friend bought a new iMac from the Regents St. store a few weeks ago, just before the update to the new models came out, and after a week she couldn't get it to boot. I felt very embarrassed as I had persuaded to her to switch to Mac after years of PC woes, so a broken mac after a week didn't look do me any favours. The genius guys didn't mess around, they took back the dead one and gave her a new one, this time she got the new version, they also threw in iWork free as a good will gesture. New one is running fine.
If you haven't already got Applecare, I highly recommend buying it within the next 12 months. I have needed it on a couple of occasions after the standard warranty ran out and the tech support has been brilliant, got me working again no quibbles.

Can't get past grey screen with apple spinning wheel, had a loading bar for a few seconds?

HElp, can not open my Mac. Stuck on grey screen with apple and spinning wheel?
PReviously opened fine but I could not remember my password try a number of passwords. I now know my password but when I turned it off and back on got this screen?

THe command R took me to a dark scree with Mac OS X Utilities with 4 choices
REstore From Time Machine Back Up
REinstall Mac OS X
GEt Help Online
DIsk Utility
HElp

MacBook won't start - gets to grey screen with clicking noise.

I think I know the answer to this one - my hard drive is fried. But before I head to the Apple Store I'd thought I'd see if anyone else had any ideas of what I can try.
I was happily surfing the web when my computer froze. I could move the mouse cursor, but everything else was unresponsive. Opt-Cmd-Esc would not work, so I had to force a restart with the power button.
The computer restarted, I got the Apple chime, but then all I could hear was a clicking. I've tried restarting several times, but to no avail.
I've also tried:
Attempting to boot into a BootCamp partition.
PRAM reset.
Boot into safe mode.
Boot from my Leopard disk (spins up, but then ejects).
Boot from my original MacBook disk (spins up, but then ejects).
Boot into target mode.
The best I've got is a flashing folder with a question mark, mostly I'm just getting a grey screen.
Can anyone else offer any ideas to try?
And, assuming I have to return it (it's under a year old), what is the story? Do I just get a replacement, or is it sent off for repair? Do I need my receipt, or can they verify ownership from my credit card/serial number? Do I need a Genius Bar appointment, or do I just show up?
Sorry for all these questions, this is the first real problem I've had with a Mac and it's come at exactly the time I need to have a laptop!

That happened to my macbook too!!!!
I emptyed my trash can, it had over 1000 items there and it took a really long time to erase all of them. Eventually it was done. I turned it off, went to bed, next morning, my reliable Macbook would not start! Grey screen, apple logo, a spinning wheel. i can hear some clicking mechanical sound.
I loaded my installation cd, pressed C key while starting. It did loaded the cd, followed the screen of installation... It failed the first time, aborted half way. I had to do it again. Second time, it did go through without issue. But now, it always takes WAY long to boot, the system is very slow, very unresponsive, I am very scared to shut down the system, i dont know if next time it will reboot again.
My macbook has been very stable and reliable, compared to my PC and Dell notebooks. It is only 1.5 year old, It is not under warranty anymore. I guess it is hard disk problem most likely. There is not even one Apple Store in Idaho. Should I go out of state to fix it? how much will it cost? I have been a long time PC user and i can fix it myself if it were a PC, I love apple but really have no idea when it has problems.

Keep getting a grey screen with circle with slash at start up after force shutting down

Similar Messages

Maybe you are looking for