Keep getting a kernel panic when i try to wirelessly print

this error happens when i try to wirelessly print
Interval Since Last Panic Report:  -1 sec
Panics Since Last Report:          2
Anonymous UUID:                    88FB00B6-092B-41B2-9999-2EF69BE53E70
Sat Apr 23 23:28:26 2011
panic(cpu 1 caller 0x2aab59): Kernel trap at 0x00295896, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x58a24000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x0f8985cc, EBX: 0x00000000, ECX: 0x3fffbd94, EDX: 0xffff0816
CR2: 0x58a24000, EBP: 0x58a23e58, ESI: 0x58a24000, EDI: 0x0f899790
EFL: 0x00010207, EIP: 0x00295896, CS:  0x00000008, DS:  0x00000010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x58a22bc8 : 0x21b510 (0x5d9514 0x58a22bfc 0x223978 0x0)
0x58a22c18 : 0x2aab59 (0x59aeec 0x295896 0xe 0x59b0b6)
0x58a22cf8 : 0x2a09b8 (0x58a22d10 0xffff0816 0x58a23e58 0x295896)
0x58a22d08 : 0x295896 (0xe 0x48 0x10 0x10)
0x58a23e58 : 0x21d8be (0x83f1840 0xf8985a0 0x2918 0x3b37)
0x58a23e98 : 0x210a3e (0x83f1800 0x0 0xf8ae960 0x940c7a0)
0x58a23ef8 : 0x216ca1 (0x83f1800 0x0 0x0 0x0)
0x58a23f78 : 0x295168 (0x99c27a8 0x0 0x0 0x0)
0x58a23fc8 : 0x2a149d (0x99c27a4 0x0 0x10 0x99c27a4)
BSD process name corresponding to current thread: usb
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 273962643315
unloaded kexts:
com.apple.driver.AppleMCP89RootPortPM          1.11 (addr 0x1441000, size 0x20480) - last unloaded 206320178964
loaded kexts:
com.silex.driver.sxuptp          1.5.1
tc.tctechnologies.driver.AlesisFirewire          8671
com.apple.filesystems.msdosfs          1.6.3 - last loaded 137031029438
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AGPM          100.12.19
com.apple.driver.AppleMikeyDriver          1.9.9f12
com.apple.driver.SMCMotionSensor          3.0.0d4
com.apple.kext.AppleSMCLMU          1.5.0d3
com.apple.driver.AppleUpstreamUserClient          3.5.4
com.apple.driver.AppleMCCSControl          1.0.17
com.apple.driver.AudioAUUC          1.54
com.apple.driver.AppleHDA          1.9.9f12
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleBacklight          170.0.34
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.driver.ACPI_SMC_PlatformPlugin          4.5.0d5
com.apple.driver.AppleLPC          1.4.12
com.apple.GeForce          6.2.6
com.apple.driver.AppleUSBTCButtons          200.3.2
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBTCKeyboard          200.3.2
com.apple.driver.AppleUSBCardReader          2.5.8
com.apple.iokit.SCSITaskUserClient          2.6.5
com.apple.BootCache          31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.IOAHCIBlockStorage          1.6.3
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.iokit.AppleBCM5701Ethernet          2.3.9b6
com.apple.driver.AirPortBrcm43224          427.36.9
com.apple.driver.AppleFWOHCI          4.7.1
com.apple.driver.AppleUSBHub          4.1.7
com.apple.driver.AppleAHCIPort          2.1.5
com.apple.driver.AppleUSBEHCI          4.1.8
com.apple.driver.AppleUSBOHCI          4.1.5
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.5
com.apple.driver.AppleSMBIOS          1.6
com.apple.driver.AppleACPIEC          1.3.5
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          105.13.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.11
com.apple.driver.AppleIntelCPUPowerManagement          105.13.0
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.driver.DspFuncLib          1.9.9f12
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.0f1
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.0fc1
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          1.9.9f12
com.apple.iokit.IOHDAFamily          1.9.9f12
com.apple.driver.AppleSMBusController          1.0.8d0
com.apple.driver.AppleSMBusPCI          1.0.8d0
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleSMC          3.1.0d3
com.apple.driver.IOPlatformPluginFamily          4.5.0d5
com.apple.nvidia.nv50hal          6.2.6
com.apple.NVDAResman          6.2.6
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController          2.4.0f1
com.apple.iokit.IOBluetoothFamily          2.4.0f1
com.apple.driver.AppleUSBMultitouch          206.6
com.apple.iokit.IOUSBHIDDriver          4.1.5
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.5
com.apple.iokit.IOUSBMassStorageClass          2.6.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.5
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6
com.apple.driver.AppleUSBMergeNub          4.1.8
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.5
com.apple.iokit.IO80211Family          314.1.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.1.5
com.apple.iokit.IOAHCIFamily          2.0.4
com.apple.iokit.IOUSBFamily          4.1.8
com.apple.driver.NVSMU          2.2.7
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.5
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.2
com.apple.driver.AppleACPIPlatform          1.3.5
com.apple.iokit.IOPCIFamily          2.6
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26100000
USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8213, 0x06610000
USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x06500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0x06300000

Hey thanks for your help i wish i had posted this sooner this i just spent 280 at apple to get my older macbook fixed for the same problem.  It makes sense i installed the silex driver to wirelessly print through my router, the alesisfirewire is a driver to allow multitrack recording on a firewire mixer. I have not been using the mixer but thats the same driver i had in my older macbook and now in hindsight thats about the same time the problem started. Weird noone at the mac store thought to ask me any of this when it was diagnosed i have alot of faith in apple and feel a little gipped out of 280 dollars if it was just removing the drivers but then again i guess you have to charge for the knowledge.  Thanks again very grateful.

Similar Messages

  • Kernel panic when I try startx: edited again

    I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
    Any ideas :?:
    If I just run xorgconfig no panic when I then run aticonfig etc panic.
    For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver    :?:
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
        Identifier  "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        HorizSync   30-96
    #    HorizSync    30-64         # multisync
    #    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        VertRefresh 50-160
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
        Identifier    "Standard VGA"
        VendorName    "Unknown"
        BoardName    "Unknown"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam    256
    #    Clocks    25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
        Identifier  "** ATI Radeon (generic)               [radeon]"
        Driver      "radeon"
        #VideoRam    262144
        # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "** ATI Radeon (generic)               [radeon]"
        Monitor     "My Monitor"
        DefaultDepth 24
        Subsection "Display"
            Depth       8
            Modes       "1024x768"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1024x768"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1024x768"
            ViewPort    0 0
        EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
        Identifier  "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
        Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    #    Mode 0666
    # EndSection
    /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/unimaps
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE=
    HARDWARECLOCK="localtime"
    TIMEZONE=Canada/Eastern
    KEYMAP=us
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by hwdetect
    MOD_BLACKLIST=()
    # Modules to load at boot-up (in this order)
    #   - prefix a module with a ! to disable it
    MODULES=(radeon)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="normlx"
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network netfs crond !kdm)
    # End of file

    KeepItSimple:
    If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
    RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
    Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
    Good luck!
    Andrew

  • Kernel Panic when I try to install OSX 10.3. Can anyone help?

    I bought this iMac recently. It has OS 10.2.? installed and OS 9.1. When I try to install OS 10.3 I get a Kernel Panic when it reboots to start the installation. I ran the Norton Disk Doctor it had over in OS9 -- said it fixed some things and now ok but I still get a Kernel Panic trying to install Panther. I just want to re-format the whole computer with 10.3 and get rid of 9. How can I do that?
    Thanks.

    KeepItSimple:
    If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
    RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
    Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
    Good luck!
    Andrew

  • I keep getting an error message when I try to log into to ExportPDF through my Adobe Reader. "Network error occurred while attempting to sign in". Can anyone help, please?

    I keep getting an error message when I try to log into to ExportPDF through my Adobe Reader. "Network error occurred while attempting to sign in". Can anyone help, please?

    Hi Simon,
    I'm sorry to hear that you're having trouble logging in to ExportPDF via Reader. I've checked your account, and all is well there.
    For starters, please make sure that you have the most current version of Reader installed by choosing Help > Check for Updates.
    If you're still having trouble logging in via Reader, please try logging in to the web interface at https://cloud.acrobat.com.
    Please let us know how it goes.
    Best,
    Sara

  • I keep getting an error message when I try to sync my new iPhone5s to iTunes. It says my computer is not authorised. When I authorise it and try and sync again, the same error message appears. help?

    I keep getting an error message when I try to sync my new iPhone 5s to iTuines.
    It says my computer is not authorised.
    When I authorise it successfully, and try and sync again, the same error message appears.
    Help?

    Hello Chad176
    If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • I keep getting an error message when I try to sync my iPhone 5 to my Mac in iTunes.  It says "The iphone cannot be synced.  An unknown error occurred (1723).

    I keep getting an error message when I try to sync my iPhone 5 to my Mac in iTunes.  It says "The iphone cannot be synced.  An unknown error occurred (1723).

    Hello Chad176
    If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • IOS updates - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2.  How can I fix this?

    IOS error messagge - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2.  How can I fix this?

    Which way are you trying to update? WiFi or iTunes? In either case, I would try restarting/rebooting all devices and then try again.
    IF you are using iTunes, eject your iPad, quit iTunes, reboot your computer and reset your iPad by holding down on the sleep and home buttons until the Apple logo appears on the screen. After the iPad starts up, connect to iTunes and try again. You may also want to disable your firewall and antivirus software when you try to update using iTunes. Sometimes those will interfere with the download.
    If you are using WiFi, reset the iPad as described above and try again.
    If WiFi updating will not work, try using iTunes, if iTunes will not work, try using WiFi.

  • Keep getting error code 10657 when I try to open certain applications?

    Hi! I keep getting an error code when I try to open certain applications, such as iTunes or Adobe PhotoShop... it reads error 10657?

    See this archived discussion: https://discussions.apple.com/message/7005768?messageID=7005768
    Bob

  • HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G

    I keep getting error message (26) when I try to restore my iPod touch 3G

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • I have a Macbook Pro. I just purchased Acrobat Pro DC and keep getting an error message when I try to download, saying I need to contact support.

    I have a Macbook Pro. I just purchased Acrobat Pro DC and keep getting an error message when I try to download, saying I need to contact support. I've eliminated previous versions of the application because they were US-based versions and I'm now living in Australia. I checked Flash and it seems to be installed correctly. what am I doing wrong?

    Hi Laura ,
    Could you please elaborate about the issue and also about the error message?
    What does it say except contacting the support?
    Is it something to do with Licensing and Activation of Acrobat DC?
    Also please update us from where are you trying to download Acrobat DC?
    I would recommend you to follow these links download Acrobat DC and see if you still face any challenges .
    If you want to opt for perpetual ,follow this link .
    Download Acrobat products | Standard, Pro | DC, XI, X
    And if you wish to subscribe for Acrobat DC .Kindly refer this link .
    Download Acrobat DC (Continuous) | Enterprise or VIP
    Regards
    Sukrit Dhingra

  • I keep getting an error message when I try to sync my ipad or iphone to my iMac:  "The iPad (or iPhone) cannot be synced.  An unknown error occurred (-50)."  What is this about?  Thanks

    I keep getting an error message when I try to sync my iPad or iPhone to my iMac, as follows:  The iPad "_________" cannot be synced.  An unknonw error occurred (-50).  Does anyone know what this is about - thanks.

    Error -50 is a very unhelpful generic communications error with a number of possible causes.  Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, which probably leaves several hundred options.

  • I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

    I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

    Adobe Acrobat 8.0
    standalone version
    Worked for years.......pc crashed.......fresh install of everything, but Acrobat will install, but I get error message when I try to use.

  • I KEEP GETTING AN ERROR MESSAGE WHEN I TRY TO BUYMUSIC (-1202)

    I keep getting error message (-1202) when I try to buy musice?

    Yep. Tried that. And just did it again.
    Still no joy.

  • I keep getting an error message when i try to send emails.

    I just got the palm treo 650 on alltel.  didn't realize it was going to be so involved. lol  I got email set up but keep getting an error message when i try to send.  the message is 530 5.7.0 must issue a STARTTLS command first.  What does that mean and how do i fix it? 
    Thanks in advance.
    Post relates to: Treo 650 (Alltel)

    Our CEO at our hospital has the exact same problem with this phone, we have been workign with alltel on the problem for quite some time now, and cant seem to find a solution. His can receive emails with no problems but gets an error code 530 when tryng to send an email. But he only gets the error when he is outside of the alltel network. If hes in our hometown then everything works great. Needless to say hes been getting quite irritated with the problem and needs it fixed ASAP. If anyone every figures out a soluting to this problem please let me know.
    Thanks
    Post relates to: Treo 650 (Alltel)

Maybe you are looking for

  • Ssrs 2008 r2 pass mutiple values to stored procedure that is being called

    In an SSRS 2008 r2 report, I am currently calling a stored procedure called spRoom. I obtain the results of the stored procedure by creating a  temptable called #roomReults The temp table that I am creating and using to obtain results looks like the

  • How to make small change in old "finished" project

    I'm now working in PPCS3. I want to retitle, but no other changes, a project I did 2 years ago in PP2. I have the MPEG2 output of that project, but did not keep the source material and prproj file. I do have the background clip for the title. I could

  • Has my iphoto got too full?

    Hi everyone. Mac newbie here! Trying to buy iphoto book of 80 pages (111mb). 2 things happen when I try. Sending book fails repeatedly just before completion. Very noisy fan (on new 'refurbished' macbook) when iphoto is open. My Iphoto has 18,500 fil

  • Fusion Apps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

    Hello Guru, I am trying to call a supplier service from SOA/OSB. But while calling the service it is failing with the below error message access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierS

  • Error when generating waveform analog output on NI 6704 card

    Hi, I am trying to understand why NI 6704 card appears to be incompatible with what I'm trying to do.  I want to use a waveform to generate an analog output voltage on a NI 6704.  I have a vi in the style of the waveform buffer generator in this exam