Keep getting a request for password "for the CalDAV account for my email account when I log in my iPhone password. ????

I keep getting a request "for the CalDAv account" when I log in using my iPhone password on my iPhone.  Just started happening.   ????

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Similar Messages

  • After login but before I can access the internet I get a request for my login password so that - aosnotifyd - can access my login key chain. How can I get it to remember my password?

    After login but before I can access the internet I get a request for my login password so that - aosnotifyd - can access my login key chain. How can I get it to remember my password?

    Rephrase your question. Do you mean you keep getting login key chain errors?

  • I know my Apple Id (not .mac) and password but I can't logon to ichat.  I keep getting a message of password not matched.  Do I need to create a new account for Ichat?

    I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat.  I keep getting a message of password not matched.  I saw somewhere that my Apple id is the same as my ichat account.  Do I need to create a new account for Ichat?  I've already reset my Apple id password 3 times in the last 2 days.  What am I doing wrong?

    Hi,
    At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
    Other IDs such as to log in to Discussions were know as Discussion IDs
    Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
    There can be a variety of combos now
    iChat Name
    @mac.com before MobileMe
    @mac.com post MobileMe
    AIM Names
    AIM names current
    MobileMe (@Me.com)
    Style
    Email Address valid with the .Mac service prior MobileMe Note 1
    Email style Name Valid with AIM
    May or may not be an Email address
    Can be AIM issued or third party Email address
    Valid Email with MobileMe Service
    Other Abilities
    May also be Currently valid email linked to a MobileMe account
    Maybe Valid Apple ID
    Is a Valid AIM Screen Name
    May Not be a Valid Apple ID (was an option choice at one stage)
    Is a Valid AIM Screen Name
    May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
    Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
    Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
    Apple ID
    Possibly (likely)
    Possibly (depends when Registered)
    More currently Yes.
    No
    No
    Yes
    Glad I could help.
    8:39 PM      Thursday; September 15, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
    Step 1
    Follow the directions in this support article.
    Step 2
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
    Select
              Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain.
    Step 3
    Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
    Step 4
    Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
    ☞ Rename login.keychain to "login-old.keychain".
    ☞ Rename login_renamed_1.keychain to "login.keychain".
    You can then close the folder. 
    Delete the login keychain from the keychain list in Keychain Access. Choose
               Delete References
    when prompted, not Delete References & Files.
    Select
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred. 
    Run Keychain First Aid again. Quit Keychain Access.

  • I cannot play music from my itunes library.  I keep getting an itunes message that says, "The song could not be used because the original file could not be found."  Is there a fix for this?  Thank you.

    I cannot play music from my itunes library.  I keep getting an itunes message that says, “The song could not be used because the original file could not be found.”  Is there a fix for this?  Has this happened to anyone else?  Is there a fix for this?  Thank you.

    Hello Turintest2,
    I am having a similar problem.  I have over 4000 songs giving me this error.  I certainily don't want to go in one by one and find them.  I know you wrote a script for Windows but I am a Mac user.  Is there a fix for me?  Here is the info on where the song is currently (used by doing the get info)
    Here's a shot of my preferences:
    Just FYI, I know that apparently iTunes is looking for this music in the trash.  However, if I go here:
    Then I find the music there as well.  (Which is where it is in my preferences.)
    Please help!  I don't want to have to go through over 4000 songs and update them one by one.

  • Keep getting auto updates for printer which I no longer have.

    I uninstalled my canon inkjet printer.  At least I believe I did - it doesn't come up when I run a search on Finder.  However I keep getting auto updates for it, which I would like to stop getting.  I may be slow but can't figure out how to do this.... thanks.

    Try going to the hard drive level Library/Printers and delete the Canon folder there.

  • I keep getting a 'Looking for backup disc' message from my  Time Capsule.

    I keep getting a 'Looking for backup disc' message from my  Time Capsule. I have set it up several times without any apparent problems (I have even done a Hard and Factory reset). Everything seems fine until I ask Timemachine to 'back up', and then the problems start.
    Any ideas?

    I had the exact same problem. I bought the Time Capsule this past July and it worked fine for about a month then it told me it hadn't backed up in 10 days and was stuck looking for the backup drive. I called Apple and they said the reason was that the Time Capsule was in Bridge mode. I launched Airport Utility and sure enough, it was. I changed it to DCHP and NAT (Airport Utility -> Network tab -> Router Mode). After updating the Time Capsule, I couldn't even get on the Internet, let alone do a backup. A logged into the software for my cable modem and discovered that it too was in Bridge mode.
    It turned out (for me) that neither should be in Bridge mode (which is for connecting two networks). Your cable modem only has one IP address. Your Time Capsule should be doing the NAT (Network Address Translation) which translates the internal IP addresses on your network to the one IP address your cable modem has. When I switched my Time Capsule to DHCP and NAT, it conflicted with the fact that the cable modem was also trying to do this. The answer was to turn this off on the modem (allowing all the packets to just go through the modem to the Time Capsule and let IT do the NAT). I did that last week and since then, my Time Capsule has been working perfectly.
    1) Go to your cable modem (via a browser, enter "http://192.168.100.1"). Log-in and find the setting that indicates NAT. If you're uncomfortable doing this or can't find it, call your cable company and ask Tech Support to do it for you. They can do it remotely.
    2) Launch Airport Utilty. Go to the Network Tab and change the router mode to "DHCP and NAT".
    3) You may need to restart your modem and Time Capsule. I can't remember if I had to or not.
    I hope this helps. I tried many things but this is the only solution that fixed it for me. And it makes sense. Only one device, the cable modem or the Time Capsule, can be doing the NAT.

  • When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

  • I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

    I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

    Yes- it is a Mac. I went through adobes system requirements and re- downloaded supportive software. The notice seems to happen near the end of the down load with the messages above. I'll look into your suggestion. Thank you- appreciated.

  • I keep getting an error (for twelve updates), when trying to update CS5 Master Collection.  I used chat, and was told to come here.

    I keep getting an error (for twelve updates), when trying to update CS5 Master Collection.  I used chat, and was told to come here.

    update directly, http://www.adobe.com/downloads/updates/

  • Trying to sync ipad keep getting a waiting for changes on desktop

    trying to sync ipad to itunes on my mac and i keep getting a waiting for changes on my itumes

    "Waiting for changes to be applied": Apple Support Communities

  • So on my MacBook Pro, a friend tried signing into the guest account. It's been stuck on the loading screen for 3 days and hasn't let me cancel the request and login to the original account. What can I do?

    So on my MacBook Pro, a friend tried signing into the guest account. It's been stuck on the loading screen for 3 days and hasn't let me cancel the request and login to the original account. What can I do?

    Hold the power button down for 10 seconds.  It will power down your Mac.  You can then start it up again and see if you can log in normally.

  • HT1349 why when i start the new ipad, it shows  " Enter the password for the CalDAV account "Yahoo!"?

    when I start my new ipad, it shows  " Enter the password for the CalDAV account "Yahoo!"? so, i need to tap the cancel button 2 times. after that, i can use my new ipad. I just bought the new ipad 21.05.2012. yesterday, worst to worst, i cannot used my new ipad because after i tap the button cancel 2 times, the new i pad just hanging there with the box Enter the password for the CalDAV account "Yahoo!". It doesn't moved and I hate it so much.

    Most likely your yahoo password setup in your mail account is wrong. When you wake your ipad it checks for mail right away(even though it has when it sleeps). Your password or something with your Yahoo mail is wrong.
    Assuming caldav is your yahoo name. If its not a yahoo email, you have email setup wrong. Its your email.

  • HT202667 I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

    I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

    Hi adamsfly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you changed your email address and iCloud is looking to sign in with the old Apple ID email. I would recommend that you read this article, it may be able to help the issue.
    What to do after you change your Apple ID email address or password - Apple Support
    Cheers,
    Mario

  • Hi, I am trying to link my Ipad to my email account, and keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on.  Please help.

    Hi, I am trying to link my Ipad to my email address, but I keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on to. Can someone please help me?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for

  • Designer Connection from SAP R3

    Today it is possible to have connection from Designer to SAP R3, if possible I can send documentation about this issue is very important to our company know of their viability. I appreciate your help. Greetings

  • Forms Is not running In 11g

    Hi, Windows 7 32bit. WebLogic 1.5 Fusion Middle Ware 11.1.1.6 Database 11g. I have problem when running form throw the web . The WLS_FORMS is running well . but when i start run form throw the web nothing in browser. what is the IE version for 11.1.1

  • Add www link to a pict/image  in Mail?

    Hi! I get all these wonderful emails from people (usually, an online biz) with picts in the email body. And when I click on the pict I'm bumped to a wonderful web site. I wish to compose email (and signtures) that way myself. But when I add a pict, t

  • IPhoto won't display my portrait photos. Help please!

    I haven't had this problem until recently. I import photos into iPhoto from my Nikon D90 via SD Card slot in my macbookpro and I have been having this problem. All the portrait photos that are imported display a blank black image on the overview and

  • About alv

    Hi Friends, I work on alv. I have generated a simple the alv report. but  I want click particular row of report and then  generate anather report. How can I write a code for report . Thanks Rahul S.