Keep getting a window to install a security update for Firefox 25.0.1. I have installed it 3 times already and still get the notice to install it again.
At least twice a day I get a pop up window alerting me to the need to install a security update for Firefox 25.0.1. I have installed it several times and still I am prompted to install it again. I have received no response from Mozilla on this issue. I had sent in an email about this several days ago.
Please note that all technical support is performed through this site. Mozilla will not respond to emails requiring technical support.
'''Try Firefox Safe Mode''' and updating while in safe mode to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.
Similar Messages
-
Everytime I get to the end of the software update for OS X 10.8.2 it says an error has occured and then restarts the download.
please help me.Perform a Permissions Repair using Disc Utility...
Verify or Repair Disk Permissions
Then Restart your Mac.
Next...
Go here > http://support.apple.com/kb/DL1581 and Download and Install the Combo Update.
After a Successful Install be sure to Restart your computer. -
Everytime I get to the end of the software update for OS X 10.8.2 it says an error has occured and then restarts the download. I have also tried downloading from the website link provided in some other comments but it says image unmountable please help
Perform a Permissions Repair using Disc Utility...
Verify or Repair Disk Permissions
Then Restart your Mac.
Next...
Go here > http://support.apple.com/kb/DL1581 and Download and Install the Combo Update.
After a Successful Install be sure to Restart your computer. -
Just downloaded latest update and saw updates for fingerprint scanners. Do I have a fingerprint scanner or where do I get one?
If you have an I phone 5s you have a scanner. It does not exist on any other device at this point, and cannot be added.
-
System exception running Configuration Wizard after installing several security updates for SP
Greetings,
Have a 2 server farm, SharePoint 2013 SP1, SQL and SharePoint. Windows Update has 15 updates downloaded and ready to install, 2 Server 2012 updates and 2 SharePoint updates, 11 Security Updates for SharePoint. So, I said yeah, go ahead and install them late
last night when I figured it wouldn't interrupt folks. (dumb move)
Windows Update took awhile, but no errors during the install. Rebooted the server as required. Once the server was back, jumped onto the server console and ran the Configuration Wizard to apply the updates to SharePoint. No problem, progressed through the
screens saying it was going to update, farm and sql information, etc. Config Wizard was going through the steps, then failed with the message: "Failed to register SharePoint services." and here's a link to the configuration log so have a jolly time
tracking it down, thank you very much.
I found the error in the log (down about 10,000 lines):
04/10/2015 03:00:02 12 ERR Task services has failed with an unknown exception
04/10/2015 03:00:02 12 ERR Exception: Microsoft.SharePoint.SPException ---> System.Runtime.InteropServices.COMException: <nativehr>0x80131904</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.get_Count()
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.get_HealthRules()
at Microsoft.SharePoint.Administration.Health.SPHealthAnalyzer.RegisterRules(Assembly assembly)
at Microsoft.Office.InfoPath.Server.Util.HealthAnalyzerRegistration.RegisterHealthRules()
at Microsoft.Office.InfoPath.Server.Administration.FormsService.Update()
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInConfigDB(Boolean provisionTheServiceToo, String serviceRegistryKeyName)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
So I've been searching around trying to find a clue about this. I tried using PSConfig as well, no dice. I tried using my admin account, the farm account, and the initial setup account, no dice. So I gave in about 3:00 AM and took a break, rather than have
my head hit the keyboard. Left IIS down and SP down. Had some help this morning when someone started things back up for me. sigh. So the users have been in on the sites and doing all sorts of important and critical things, so rolling back to the last
backup is the last, last resort. (Fortunately, I did do a manual backup using a PowerShell script before starting all this.)
Help. Please.
The actual sites are up and seem to be working fine. Central Admin is down though, get a 500 Internal Server Error in the browser, so things aren't correct. Duh. The config wizard didn't finish.
Thanks much,
Steven0x80131904 translates to COR_E_SqlException. Typically this will be an MDF/LDF file out of space, or the volume that those files reside on being out of space. Check that first, then also check the SQLERROR log file for any issues.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Need to find the latest security update for firefox browser
Due to PCI SOX compliance i need Firefox should be updated with latest security updates.
Please let me know the way from where i can get the latest security update for different version of Firefox.Hello,
If you update Firefox and its plugins to the last versions you will have the last security updates:
*[http://www.mozilla.org/en-US/firefox/new/ Firefox]
*[http://www.mozilla.org/en-US/plugincheck/ Check Plugins] -
is there a software update for Mac OS 10.5 or will I need to download a newer version of the OS to insure that my Mac is safe?
...is there a software update for Mac OS 10.5
Yes. Apple just released the following
Flashback Removal Security Update
...and a Flash-related update
Leopard Security Update 2012-003 -
I keep getting error message -42408 when I try to open ITunes Store.I sent a email to support and they sent me a link from Roy B,I tried both of his sugegstions and neither worked.Anyone have any other ideas????
Did you get anywhere with this, ikeaheerlen?
I am having the same sort problem (although my keyboard is recognized so I'm much further along than you).
I had a MacBook Pro with an XP SP3 partition and a Windows 7 partition on it.
I switched to a Mac Pro and wanted to migrate them over to it.
I used WinClone to make backups of both partitions and transferred the WinClone images to the Mac Pro.
I manually created the partitions and restored the WinClone images into each one.
But VMware wouldn't recognize either one.
So I deleted them both, and let Boot Camp Assistant (re-)create a single Boot Camp partition. Then I restored the Windows 7 WinClone image into it.
Ever since then all I get is "BOOTMGR is missing" error.
I thought maybe since I had dual-boot working (with a boot manager) in the old MacBook Pro setup, that the boot manager must've lived on the Windows XP SP3 partition, and it's completely missing from the Windows 7 partition. So I figured I needed to recreate it somehow.
After using the Windows 7 DVD ISO disc image to boot from, and trying several automated/manual steps, I can now actually get VMware to recognize the Boot Camp partition as being one, but when it tries to set it up for use with VMware, it complains that it isn't ready because it must have shut down incorrectly. It says to boot into Windows, then do a clean shutdown. But when I select the Boot Camp partition from Startup Disk, it boots from it but I still get the "BOOTMGR is missing" error even in a 'native' Boot Camp boot
I've tried all the steps I can find (including manual "bcdedit" steps booted from the Windows 7 DVD disc image) to no avail. I don't know what else to try at this point ... -
itunes has stopped working
Error 7 (windows error 998)
this happened after attaching my old ipod, however I have since uninstalled and reinstalled several times and each time on opening via shortcut or main icon it gives the following message again
Itunes was not installed correctly. Please reinstall iTunes
Error 7 (windows error 998)
any suggetions ?Hi animalsintheark,
Thanks for visiting Apple Support Communities.
You may want to try the steps in the "Additional Troubleshooting" section of this article, before trying to reinstall again using the steps in "General installation troubleshooting:"
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy -
I updated my Macbook Pro to Yosemite this morning, (it took almost 2 hours!), and now iPhoto tells me it's incompatable with Yosemite and I need to download the latest version. I've done that 3 times now and restarted twice, (just in case) and I still get the same message, incompatable...download the latest version of iPhoto.
Frustrating as ****!The "latest" version is a bit ambiguous. The App Store may be only showing you the latest version you bought, not the most recent version.
Which version did you download?
You need to install iPhoto 9.6 and launch this version. If you previously have been running a version of iPhoto 8.x.x., you cannot update, but need to buy the upgrade to iPhoto 9.6 from the "Featured" tab of the App Store..
Then launch iPhoto from the Applications folder. The Dock icon may still be tied to the older version.
Also, depending on the version you upgraded from, you may need to run the iPhoto Library Upgrader, if your iPhoto Library has been created by iPhoto 7.1.2 or earlier, see this link: iPhoto '11: About the Library Upgrader -
Can I have a blackberry e-mail account and still get my Outlook e-mails redirected to me
I am using the redirector now to get my work e-mails and I am wondering if you can have a blackberry or other e-mail account on the same phone. So I would recieve my work e-mails via the redirector and maybe have personal blackberry e-mail account that would go to the same phone?
Yes, as long as you have the proper service plan from your carrier. You must have what is often called The Blackberry Data Plan -- a generic data plan is usually insufficient. Contact your carrier to be sure that you have a plan that provides you with access to their Blackberry Internet Service. Then, use these instructions to configure personal email accounts:
http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
question is as above ... Have uninstalled all the firefox folders I can find ... But still having same problem ...
I was able to get firefox to uninstall, then install by doing the following:
Delete the following folder:
C:\Program Files\Mozilla Firefox
Open the registry by clicking start, type regedit in the search field, and hit enter.
Navigate to HKey_Local_Machine\Software\ and delete the following three keys:
Mozilla,
mozilla.org,
MozillaPlugins.
If you are running a 64-bit version of windows, navigate to the following key instead:
HKEY_LOCAL_MACHINE\Software\WOW6432Node\
Then, Open up programs and features (or add/remove programs in windows xp), and click mozilla firefox and then click uninstall. You should get an error about not being able to uninstall and if you would like to remove the program from the list. Click yes.
Now you should be able to install firefox. -
I have several questions. iPhoto does not meet my needs. I would use lightroom mainly for organization and downloading photos from my camera cards. My cameras are Sony disc-hx200v and a little Kodak I will need to know if they are fine with light room. Also I use pixelmator for photo editing and likely will use iskysoft dvd maker for mac to create my dvds once edited. I am desperate to find a way to make my work flow work. i.e. I need to get photos somewhere on my mac, in this case it would be lightroom then I need to edit them in lightroom and pixelmator, then be able to get that album/slideshow/folder whatever you call it Into the dvd maker to voiceover and finish the project. It looks like aperture would have been more to my taste but they are
also taking that away. Yeah! Go Apple. About all I will have left of use is an operating system and mail. Will appreciate any help. I am 73 and doing dvd's for Amazon so I really can't afford any more programs that are snatched away and learning curves that change every 6 months.Are you shooting in raw or jpeg?
I’m not sure there is raw support for your Sony model and you don’t say which Kodak you have. But for jpegs Lightroom will normally work.
For your existing photos it would usually be necessary to export versions to the desktop or create new folders in Finder. Those duplicates will contain the editing adjustments you have already made and can be imported into Lightroom using “Add” in the import dialog.
I would suggest you download Lightroom and use it free for 30 days. You can then test it to ensure it meets your needs. You can download from this link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5856 -
Upgrade scheduled for 1-21-12..could I do it 3 weeks early and still get upgrade pricing?
My upgrade date is 1-21-12..My fiance wants to come on a plan with me and her current contract with another company end on Jan 3. Would I be allowed to get my upgrade pricing a little earlier if I am adding a line and changing plans?
Also, we are not looking at IPhones..actually looking at the LG envision. Anyone have any clue?
Thanks in advanceJT4104 wrote:
My upgrade date is 1-21-12..My fiance wants to come on a plan with me and her current contract with another company end on Jan 3. Would I be allowed to get my upgrade pricing a little earlier if I am adding a line and changing plans? You can ask, but probably not. It depends on if you get a sympathetic rep, and if they say yes, I would upgrade with them immediately.
Also, we are not looking at IPhones..actually looking at the LG envision. Anyone have any clue? That makes it more likely, but not certain.
Thanks in advance
Each line has its own contract, so you can add your wife and get her a phone now without interfering with your upgrade. -
It was a very hot day and my computer suddenly shut down and Firefox crashed. Now Firefox won't open even after reinstalling. Email and IE ok. I want Firefox back. Help!
Make sure that you haven't left a profiles.ini file.
* http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Maybe you are looking for
-
How to display omega sign in string indicator
Hello, I want to print a omega sign in word report.
-
Blackberry Curve 9310 won't reconfigure my Google email
I accidently pressed something on my Blackberry Curve 9310 and it caused all my phone calls and Google emails to run together for awhile. Well,I finally fixed that,but now I can't send any pictures from my phone to my Google email without me getting
-
My steam keeps on asking for universal access
My steam keeps on asking for universal access but i gave it access and it keeps on asking for it!!!!!! help me please!!!!
-
Need moD help employee want advice for my aunt
Hi there In a nut shell mu grandad house has my aunts bungalow in the grounds He has two lines coming in One business set up for him - bb is not abled on this line My aunts line - bb enabled but does not have a router with more than one port has the
-
MacBook Pro-blem 2011 stuttering startup
Recently when starting up in maverick I have about 25 mins of harddrive stuttering. Past the ~25mins things seem to return to normal. Bootcamp doesn't exhibit any such problems. Is my harddrive on its death throne? Or can this be remedied ? Pleas