Keep getting error code 49 please help

Can't figure out how to print or scan keep gettign error code 49. Please help

Although it's a better bet with a 2330 than a 2349, I'd try running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

I Keep getting Error 7 Please help.

I Keep getting Error 7 on my iTunes and Ive reinstalled its many times, ive also tried the Winrar way and it still didn't work, The message i keep getting when i try to open iTunes is "The procdure entry ponit" "AVCFURLAssetInheritQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFfoundationsCF,dll." And when i press ok it keeps saying "iTunes was not installed correctly, please reinstall Error 7" please help i want to use my iTunes again. thank you

Hi Julesayee,
Welcome to the Apple Support Communities!
I understand how frustrating it can be when you cannot open iTunes as you would expect. It sounds like you have tried some good troubleshooting already as well. When you uninstall iTunes, all of its components must be removed with it and in the correct order. Please use the following article for information on troubleshooting an error like the one you are receiving.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Have a great day,
Joe

TS3694 keep getting error code 1015 help please

as title says i keep getting this error code while tryin to restore (1015)

http://support.apple.com/kb/TS3694#error1015

DVD burner wont burn...keep getting error's. please help me

So here's the situation, ever since i downloaded Audio Highjack Pro i've not been able to burn dvd's or cd's...it starts to burn and gets to about 2.3% or somewhere around there and it gives me this error....
"Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)"
This is the model of my dvd burner "HL-DT-ST DVDRW GWA4080MA" i dont know if that helps
I bought the computer just over a year ago and havent had any problems until this.
Does anyone know how to fix my problem??
Please help me. I'm a Productions manager for an extreme sports Tv show up here in Lake tahoe and i need my Dvd burner to work so i can use it in my daily work. thanks alot
Harrison

if you want to use the same font but different size/color etc, just create a different textformat instance or you could re-use the one you already defined:
var font3:Font=new Font3();
var dtFormat:TexFormat=new TextFormat();
var dtText2:TextField=new TextField();
dtFormat.font=font3.fontName;
dtFormat.size=15;
dtText2.autoSize=TextFieldAutoSize.CENTER;
dtText2.defaultTextFormat=dtFormat;
dtText2.embedFonts=true;
var dtfFormat3:TextFormat=new TextFormat();
var dtText3:TextField=new TextField();
dtFormat3.font=font3.fontName;
dtFormat3.size=22;
dtFormat3.color=0xaa0000;
dtText3.autoSize=whatever
dtfText3.defaultTextFormat=dtFormat3;
dtText3.embedFonts=true;
it only gets tricky when you want bold or italic or bold and italic fonts embedded. those are different fonts and those need to be embedded seperately.

I keep getting Error code (-69) HelP!

Hello all,
I just baught a 20 gig iPOD and Ive added a few hundred songs to it right? Right, so far nothing went worng until earlier today...
As I click 'Update iPod' It started updating but then A box poped up saying...
Error, Code (-69)
So I did some resaearch and found out what the code ment..
Disk, Serial Ports, Clock Specific Errors::
-69 | badCksmErr | addr mark checksum didn't check
Can anyone help me fix this?
Thanks so much.
Regardes,

Hello bangbang99,
And welcome to Apple Discussions!
The only suggestion I have for you is to take a look at this Apple support document if you haven't already.
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
B-rock

HT201210 I,m trying to restore my phone but I keep getting Error code 21.... help please

I,m trying to restore my phone but I keep getting Error code 21.... help please iPhone 4S

Take a look at this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You could just update or uninstall the security software on your computer and then test again.

HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

Same problem. I make playlists on Ping so the listeners of my podcast can easily download the songs I talk about. But for **** near 2 weeks now I can't edit a playlist or add a new one. When are they gonna fix this?

I got my iphone4 yesterday and when I try to get any apps from apps store I keep getting error 1004 please try later please help th iPhone is brand new!

I got my iphone4 yesterday and when I try to get any apps from apps store I keep getting error 1004 please try later please help th iPhone is brand new!

mandyfromhull wrote:
I got my iphone4 yesterday and when I try to get any apps from apps store I keep getting error 1004 please try later please help th iPhone is brand new!
Try this link to fix your problem.
http://forums.macrumors.com/showthread.php?t=949246

HT1338 My kid down loaded mackeeper and now I can not get rid of it. I have tried all techniques suggesting on several sites and still can not empty the trash can. keep getting error code -8003. Help.

My kid down loaded mackeeper and now I can not get rid of it. I have tried all techniques suggesting on several sites and still can not empty the trash can. keep getting error code -8003. Help.

http://reviews.cnet.com/8301-13727_7-20020873-263.html
This should help you empty what's currently in the trash, but is no guarantee you got everything related to MacKiller off the drive. See Ogelthorpe's link.

TS3694 i keep getting error code 3194 i just want update to5.1.1 on my ipad help

i keep getting error code 3194 i just want update to5.1.1 on my ipad help

Here you go: http://lmgtfy.com/?q=iphone+error+3194

Help I cant update the 2014 security. I keep getting error code 102

My computor has updates that I cant get to update. itunes 11.2.2 and security update 2014-002 1.0. I have tryed many times but I keep getting error code 102. does anyone know what is happening?

kbprovo,
Try updating using the stand alone installer.
Go to Safari/Preferences, General tab, for Save downloaded files to: select other then select desktop from the left side bar. This will download the stand alone installer to your desktop. Then double click on it and follow the prompts.
You have not disclosed your version of OSX so I will include multiple versions.
Mavericks security:
http://support.apple.com/kb/DL1740
Mountain Lion
http://support.apple.com/kb/DL1738
Lion
http://support.apple.com/kb/DL1738
Try using an ethernet connection if possible, less chance of corruption.
You can also try this in safe mode
power off, power on holding the shift key till you see the progress bar then release and allow to finish booting, then try.
Itunes
http://support.apple.com/kb/DL1614

HT201210 i keep getting error code 37 on my ipad 1 its in dfu mode and will not restart pls help

i keep getting error code 37 on my ipad 1 its in dfu mode and will not restart pls help

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3125

12.1 update for PSE 12, keeps getting Error Code: U44M1P2003.

Trying to install the 12.1 update for PSE 12, but keep getting Error Code: U44M1P2003. Anyone have any suggestions for getting around this?
The update for Camera Raw files updated just fine.
Thanks for any help
Tom

Hi Photomac,
Please refer to the following link:
http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-erro r.html.
Sarika

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

FRANK M
What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
For the 9.0.1 Update
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Camera Raw (last update possible for 9) is 6.5
Camera Raw-compatible Adobe applications
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
Please review and consider the above, and then let us know the outcome.
Thank you.
ATR

I keep getting error code-3000 error at itunes store try again later?

I keep getting error code -3000 error at itunes store try again later what the heck?

Hi luvthesuns,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are getting a few error codes. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
iTunes: Possible iTunes Store errors - Apple Support
iTunes Store reporting error 0x80090318
Apple software on Windows: May see performance issues and blank iTunes Store
Troubleshooting Home Sharing - Apple Support
Cheers,
Mario

Keep getting error code 49 please help

Similar Messages

Maybe you are looking for