Keep getting error message access denied then already a project with that

name saved.
I don't understand why this is happening now, I have done this stuff many times before and NOW I am getting this message over and over! I am trying to start a new project and I keep getting that message. (it also says there is already a project using that name that I am trying to save it as. I have tried rebooting and shutting down FCE to no avail. I can't render anything because I guess I am NOT allowed access to my own project. Does anyone know how to resolve this? I have an external drive that my scratch settings are set to. They are still there and the message is STILL bouncing up.
Thanks in advance
ruez

The other error message reads "there is already a project with that name", when I try to save it. Then it saves it as a copy, then the next time it is saved as a copy copy. I don't get it! I am doing just what I have always done and now this?
When you say 'drives' what are you referring to exactly? How would I trash my preferences? Where would I check permission on my drives?
Thanks Tom, as I am sitting here that little FCE icon is flashing me already to tell me Autosave: A file of this name already exists. When I click ok, Autosave comes back with access denied.
Thanks for all your help!!
ruez

Similar Messages

  • I'm trying to open a PDF file but keep getting error message "Access denied."  Help.

    Every time I try to open a PDF attached to an email I get the error message "Access denied."  How do I fix this?

    Actually my son directed me to a help site run by a guy named Brian Stevenson.  Here is what I did --
    1.  Launch Adobe Acrobat Reader XI
    2. Go to Edit>Preferences
    3.  Click on Security (Enhanced)
    4. Uncheck "Enable Protected Mode at startup"
    5. Click Yes when dialog box open to remind closing of application
    6. Click OK to save
    7. Exit Adobe Reader
    Worked like a charm!!

  • Getting Error Message "Access Denied" and "Unable to Execute!

    Using jmf-2_1_1e-windows-i586.exe on Windows XP. When I open the executable it prompts me if I want to overwrite the existing files. If I do yes, then I get "Access Denied". If I do no, then I get "Unable to Execute!
    "C:\DOCUME~1\HP_ADM~1\LOCALSS~1\Temp\pft1~tmp\SETUP.EXE" /SMS
    Unable to execute the command line"
    What am I doing wrong?

    Sounds like you don`t have write permissions for that directory. Not a java problem.
    regards

  • Keep getting error message and told "Indesign Needs to Close" with no other information

    Hi All - I recently upgraded to Indesign CC and have nothing but issues.  The program constantly errors out and says it "needs to close" with no other explanation.  I finally was able to finish my document by constantly restarting my computer and am now unable to export to PDF.  Just keep getting that error. After a dozen tries it did finally complete export but the file is absurdly huge and I am unable to drop it into my printers ftp:
    Any thoughts?

    See Replace Your Preferences and Remove minor corruption by exporting  for starters.

  • HT4623 It says my software is the 4.2.1 Version but I keep getting error messages when I try to download an application that  I need IOS 4.3.

    How do you update from 4.2.1 to iOS 4.3? I can't download any applications...

    This article will tell you how to update your iPhone 3GS to the latest iOS version, 5.1.1: iOS: How to update your iPhone, iPad, or iPod touch
    However, if you have an iPhone 3G, then you cannot update past 4.2.1.

  • Keep getting error message from 'Cron Daemon'

    I have been running an Xserve G4 with Mac OS X Server 10.3.9 as a mail server and web server for several years now with no problems. Recently, however, I tried to set up a mailing list, which I had never done before. When I tried doing this, OS X automatically created a mailing list called "Mailman" for me, in addition to the mailing list I created.
    Now I keep getting error messages sent by "Cron Daemon <[email protected]>" to that "Mailman" mailing list. The error messages are sent to the mailing list and I get them as a subscriber to the list. They read:
    ====
    From: [email protected]
    Subject: [Mailman] Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/senddigests
    Date: 6 mai 2006 12:00:00 HAA
    To: [email protected]
    Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
    Mailman mailing list
    [email protected]
    http://www.mydomain.com/mailman/listinfo/mailman
    ===
    I did some research on the OS X Server support pages and discussion forums and couldn't find any references to such a problem.
    With a worldwide search with Google, I only found very obscure stuff about Python, which I know nothing about.
    The mailing lists appear to be working fine other than that (and the fact that Mailman uses "www.mydomain.com" instead of just "mydomain.com").
    Any help would be greatly appreciated.
    Pierre

    Thanks for the clarification. I really do not need anything fancy at this point. Also, please note that I am still using Server 10.3.9, not 10.4.
    Now, as for the initial problem, I am afraid it is not gone. It has just changed. Here's what I got in my mailbox this morning:
    ===
    From: [email protected]
    Subject: Un envoi sur la liste Mailman à partir de [email protected] requiert une approbation
    Date: 8 mai 2006 09:25:02 HAA
    To: [email protected]
    En tant qu'administrateur de liste, votre autorisation est nécessaire
    pour l'envoi du message suivant vers la liste:
    Liste: [email protected]
    De: [email protected]
    Objet: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
    Raison: Envoi par un non-abonné sur une liste reservée aux abonnés
    Quand vous le souhaitez, rendez-vous à:
    http://www.mydomain.com/mailman/admindb/mailman
    pour approuver ou rejeter la demande.
    From: [email protected] (Cron Daemon)
    Date: 8 mai 2006 09:25:01 HAA
    To: [email protected]
    Subject: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
    Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
    From: [email protected]
    ===
    In other words, the error message is still coming, but now it's being sent by "[email protected]" and since this is not a subscriber to the list, I get the admin notice requiring approval. (It's in French because I am using mailman's French-language option, but you should get the gist of it .)
    I still do not know:
    1) what causes this message and what it means
    2) why it's coming from "[email protected]" rather than "[email protected]".
    Like I said, I changed the "host_name" option from "www.mydomain.com" to "mydomain.com" in both mailing lists I have, but obviously there is still some part of Mailman that thinks it should be using "www.mydomain.com".
    I am afraid I still don't know what to do about this.
    FWIW, I ran the check_perms command you gave me this morning and it did find 10 problems and corrected them. I don't know yet if this will help with this particular problem.

  • I keep getting error message 6001 on my Canon MX920 Printer.

    I keep getting error message 6001. I followed the instructions for that error code. No benefit. Help me. I need my printer to work!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Trying to install final cut express keep getting error message "FCE" can't install on this disk.  A newer version of this software already exists on this disk.  Have remove all FCE elements with no success.

    Keep getting error message "FCE" can't install on this disk.  A newer version of this software already exists on this disk.  Have remove all FCE elements with no success.

    http://www.digitalrebellion.com/fcsremover/

  • Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    downloaded new version but I keep getting error message with download.
    What does the error message say, andrea? (Precise text, please.)

  • When I go to a web page power point presentation saved as Adobe the first page loads then I keep getting error message:

    I have Adobe Acrobat Pro XI
    And its up to date.
    When I go to a web page Power point presentation saved as Adobe the first page loads then I keep getting error message:
    There was a problem reading this document (14)
    I've tried refreshing the download.
    Im using IE 11
    windows 8.1
    Any ideas how to fix this?

    [moving discussion to Creating, Editing & Exporting PDFs forum]

  • I can't no longer access Itunes.  Keep getting error message 127.  I tried uninstalling Itunes, but can't.  So frustrated.  Please help.

    I can't no longer access Itunes.  Keep getting error message 127.  I tried uninstalling Itunes, but can't.  So frustrated.  Please help.

    First, if you've moved the iPhoto library to an external drive, make sure that drive is mounted by opening it in the Finder.
    The issue can be caused by sharing the photo library on a network (against Apple's advice) or by opening it in more than one local user account at the same time. You may be able to clear the error by logging out or restarting the computer. If not, do as follows.
    Quit iPhoto if it's running, locally or on any file-sharing client. Select the iPhoto Library in the Finder. Usually it's in the Pictures folder, but you may have moved it somewhere else. Right-click or control-click the library icon and select
              Show Package Contents
    from the popup menu. In the folder that opens, navigate to
    Database/apdb/lockfile.pid
    and move that file, if it exists, to the Trash. Close the Finder window.
    Credit for this observation to ASC member Elijahg.

  • Keep getting error message when trying to connect

    First, I am severly hearing impaired and telephone support is not an option.
    I went from an iMac G5 to an iMac 3.4 GHz Intel Core i7. Contribute had been working perfectly with the old iMac. Now whenever I try to connect I get the following error message: "Access Denied. The file may not exist, or there could be a permission problem." When I go through the trouble shooting file I keep getting the error message while trying to re-configure. Can someone please help??

    What is the version of Contribute and also the Mac OS ?
    Can you try clearing the Preferences this would be like launching Contribute freshly?

  • I keep getting error message"

    i keep getting error message " selected items can’t be edited in iPhoto" . the video is from my iPhone and have edited others but this one has me stumped. it will let me add music and a text tile , but i want the advanced edit. any ideas? thanks

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • I keep getting error message when trying to sign in for iMessage with my Apple ID since upgrading to iOS 7

    I keep getting error messages when I try to activate iMessage on my iPad since installing iOS7. Anyone else having this issue or a solution. I can obviously sign in with the same Apple ID information/password as I have done here and I am connecting with Wifi now and in all other apps.

    After looking at some other posts I signed into iTunes and edited my password with my Mac. Then I powered off and restarted my iPad and all is good now.

  • Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

Maybe you are looking for

  • Xorg + 3650 + fglrx...

    alright, this is seriously making me sad. if any of you lurk on irc youve probly argued with me once or twice in the past. so i was so unlucky i got an ati graphics card. my whole system is compatible, the only thing that refuses to work is xorg+fglr

  • Pre ordered album is available, but can't find it in the downloads section on ipad 2

    The new album by coldplay is released and I received an e-mail with a download link. If Infollow the link on my ipad, it says to check the downloads section, but the album isn't there...

  • URL decode street addresses from PHP

    Hi there, I had a php programmer write me a script to download information from a local real estate board, and it works great, but we had to have it download to an xml file using urlencode in php (there were characters in the listings that caused pro

  • IOS update 7.1.2

    Just upgraded my iPhone 5s and I can't get my photo steam? No sure what to do

  • Compressor Screen layout is messed up

    When starting Compressor only the top menu is displayed. No windows at all. When I try selecting any of the build in layouts (Window/Layouts) nothing happens. I can get it to display Settings, History and Preview by selecting them from the Window men