Keep getting error message, "An error has occured when opening this webpage so being reloaded". How to fix on iPad2. Software is up to date.
Keep getting error message, "An error has occured when opening this webpage so being reloaded". How to fix on iPad2. Software is up to date.
Hello jodifromahwatukee,
Welcome to the Apple Support Communities!
From what I understand, it sounds like Safari is not loading a single page or multiple webpages correctly and it is trying to reload the content. In this situation, there are a few different steps that I would recommend.
First, I would recommend clearing your history and website data as described in the attached article.
Safari web settings on your iPhone, iPad, or iPod touch - Apple Support
Nest, after the data has been cleared, I would recommend closing Safari completely as described in the next attached article.
Force an app to close in iOS - Apple Support
After Safari has been closed, reset your iPhone. After the reset, open Safari fresh and use it as you normally would. If the issue continues, please let me know.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a great day,
Joe
Similar Messages
-
Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?
I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
You need to backup your computer then uninstall I-tunes and reinstall itunes.
Delete iTunes
Deleting iTunes is not recommended unless you know what you’re doing.
Launch Terminal from the UTILITIES within Applications
Type the following commands:
cd /Applications/
This brings you into the Applications directory, the next command deletes iTunes itself:
sudo rm -rf iTunes.app/
Enter the Administrator password to confirm
There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
http://www.apple.com/itunes/download/ -
Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.
The problem was solved by Apple Technical Help. The process is as flollows:
1. Open Safari
2. Menu item Safari-Reset Safari - remove all website data - reset
3. Now if you try to login on iTunes connect it will work. -
I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert a PDF file for ms word?
Adobe Reader is free; but you may have paid for the ExportPDF service.
Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
[topic moved to ExportPDF forum] -
I rented a movie but I can't seem to play it. I keep getting the message an error occurred downloading this content. Please try again later. It doesn't tell me how much later, but I've tried off and on for a week and I can't seem to resolve it.
Welcome to the Apple Community.
This sometimes resolved by unplugging the Apple TV for a few moments and trying again, others have found restarting the router may help. Another reason that message can occur is when the download speed is extremely slow, have you tested your Internet download speed with speediest.net. -
Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"
First, try a system reset on the iPod. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, reset the Apple TV. I'm not at mine right now and I'm talking from memory but the reset is somewhere in the Settings menu. -
I keep getting a message (an error occured loading this conten every time I pick a movie to watch on Netflix!!! Help
Welcome to the Apple Community.
This sometimes resolved by unplugging the Apple TV for a few moments and trying again, others have found restarting the router may help. Another reason that message can occur is when the download speed is extremely slow, have you tested your Internet download speed with speediest.net. -
I keep getting the message unknown error (13019) I uploaded the upgrade for I tunes and bought some music and that went ok but when I went to sync it everything goes ok till the end and I get the error message .I took I tunes off the comuter and re downloaded it ,but the process is the same
Did you try all the suggestions mentioned in this article? iTunes Error 13019 during sync
Some users solved the problem by removing duplicate songs: https://discussions.apple.com/message/17047386#17047386 -
I am trying to burn an imovie to a DVD. I keep getting the message multiplex error. I do not know what to do. Please, can anyone help me.
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
I am trying to get my computer on iTunes Match but I keep getting the message "unknown error (4001)? Have no clue..........help!
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
-Griff W. -
Why do I keep getting tihs message ArgumentError: Error #2015: Invalid BitmapData.
ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData/ctor()
at flash.display::BitmapData()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlasResource()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlas()
at com.king.flash.spaceland.texture::TextureManager/createDynamicAtlas()
at com.king.ragnarok.spaceland.atlas::DynamicAtlasFactory/createDynamicAtlas()
at com.king.stritz.juego::ProfilePictureLoader/load()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePictureWithSocialUser()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePicture()
at com.king.stritz.view.spaceland.diorama::DioramaPortraitsView/setUpCurrentUser()
at com.king.stritz.presenter.diorama::DioramaPortraitsPresenter/show()
at com.king.stritz.presenter.diorama::DioramaPresenterImpl/show()
at com.king.stritz.state.main::DioramaMainState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
at com.king.stritz.state.main::PerformanceCheckState/changeState()
at com.king.stritz.state.main::PerformanceCheckState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
at Function/PreloadingState.as$0:anonymous()
at Function/Assets.as$1:anonymous()
at com.king.ragnarok.spaceland.assets.zip::ZipAssetLoader/callback()
at Function/ZipAssetLoader.as$0:anonymous()
at Function/ImageDecoder.as$0:anonymous()
at Function/onComplete()Hi Chris
Thanks for getting back to me. I need to be sure the Flash Player I will be installing is for windows 8.1. Can you help me with that please.
Thank you so much. Luetta
From: chris.campbell <[email protected]>
To: Luetta Marshall <[email protected]>
Sent: Friday, May 1, 2015 3:43 PM
Subject: why do I keep getting tihs message ArgumentError: Error #2015: Invalid BitmapData.
why do I keep getting tihs message ArgumentError: Error #2015: Invalid BitmapData.
created by chris.campbell in Using Flash Player - View the full discussionHi Luetta,I think the confusion here is that you are seeing a message that was meant for Flash Player developers, and Namisha assumed you were debugging your own flash code. If you are simply trying to use Flash Player, we'll need to uninstall the debug version of Flash and install the regular version instead. Assuming you are on Windows, here are the steps required: 1. Uninstall Flash Player by downloading and running this program: http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe 2. Once uninstalled, open your web browser and navigate to: https://get.adobe.com/flashplayer 3. Walk through the steps on that web page to get the right version of Flash Player installed Once you have the normal version of Flash installed, you will no longer see these error messages. If you continue to have problems, please email me at [email protected] and we can do a quick desktop sharing session so I can help you out. Thanks,Chris If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7503430#7503430 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7503430#7503430 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Using Flash Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
An error has occurred when creating this editor
I had created a View in a WDC project which I had also deployed and run successfully in GP several times. Once I closed and opened NetWeaver Developer Studio, and tried to open this View again I get an error saying 'An error has occurred when creating this editor'. Please let me know what could be the reason.
AnilI also faced with this problem several times but without fatal consequences. To be sure you can check the log in your workspace and paste it to the thread.
Also, try to close all the views and reopen the studio, usually it solves the problem.
Aliaksei -
Cant's connect my Google and Yahoo calendar's. I am getting the Error message :A secure connection could't be established". Any recommendations on how to fix it? iMac/Mavericks
This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
%APPDATA%\Mozilla\Firefox\Profiles
You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files. -
Keep getting the message that iTunes has stopped working
Keep getting the message that iTunes has stopped working. Cannot contact the store to do anything
Ahhh, a number of anti-virus programs have issues with programs that use libraries that may look like virus signatures. Hardware damage can cause software problems in programs open when the hardware problem occurs by causing electrical impulses that destroy parts of the software. The short answer is it would be a good idea to have a really good technician make sure the computer is correct and then transfer the content of the hard drive to a clean hard drive and reinstall programs that don't pass checksum tests.
The total of what you say is a system that could use a careful going over...make sure you are working from a stable and solid base. -
I keep getting a message of 2800 007.jpg when I try to to itunes on my laptop. I cant access it at all. Then when I connect my ipod to my desktop get the same message and says I cant sync with error. I want to wipe out itunes on laptop and reinstall but will that take away all my songs I have purcahsed from itunes?
Duncanray10 wrote:
... I keep getting a message stating my ipad needs software to be 10.6.3. ...
You are misreading it... it is referring to iTunes on your computer...
Download and Install the Latest version of iTunes onto your computer...
http://www.apple.com/support/itunes/install/
Maybe you are looking for
-
Hi Experts, What is the diff btn EDI and ALE. Straight answers will be rewarded. Regards, SAI
-
Firefox crashed even before the browser window is shown
Immediately after I double clicked the icon, it immediately showed crash reporter dialog.. I don't even see the browser window to try the safemode. I uninstalled and resinstalled. Still crashed.
-
Can you add podcasts or radio stations to itunes?
Is it possible to add podcasts or radio stations to iTunes that aren't already available there? If so, how is this done? Thanks.
-
Forms- ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION -
Hi All, I know that our system is using very old technologies (ie Java version, AS 10g 10R2, IE 8, etc). But due to the nature of the application, we can't upgrade it yet for a lot of both technical & political reasons ( i know some of you guys out t
-
Help - Missing: Tempo Value Slider, Time Signature Slider
I'm assuming I'm missing something really basic here but I can't for the life of my find an answer. How do I set which controls appear in the project controls area at the top of Soundtrack Pro? I see Sample Rate but I do NOT see the Tempo Value Slide