Keep getting error when trying to instal Mavericks at the stage when computer is supposed to restart?

Have tried to instal mavericks on a 2011 mac mini serveral times and keep getting a error when it gets to the reboot stage. Help needed thanks!

Have you tried un-installing, then going to Apple Downloads (http://support.apple.com/downloads/) for download /installation of QT 7.6.2?
Also - it wouldn't hurt to repair permissions before & after installation.

Similar Messages

I keep getting 'unknown error' after clicking 'install app' when trying to download Mavericks from the App store.

Trying to install Mavericks from the App store on my 2011 11" Macbook air, (wihch has more than 15GB free space). After clicking 'Install App', and entering the Apple ID password, I get 'unkonwn error'.

You can't use Safari to download iPad apps. Only use iTunes/App Store.
 Cheers, Tom

On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

Clean the iPhone charging port with a clean dry toothbrush.

HT201210 i keep getting error code 37 on my ipad 1 its in dfu mode and will not restart pls help

i keep getting error code 37 on my ipad 1 its in dfu mode and will not restart pls help

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3125

Error message when trying to install Mavericks onto macbook pro.

Hi Been trying to install Mavericks onto my macbook pro (10.6.8) but the install fails after 3-5 minutes and I get this error message: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
I have tried to repair the drive through the utility function but I am told it cannot be repaired. I tried the recovery function as well but whilst I am able to select the source (external hard drive with recent time machine backup) the next screen prompts me to select the disk to restore but all it does is search for a drive and there is none there to select.
Really not sure what else to do. Please help!

Well some progress has been made so thought i would post what I did, in case someone experiences the same issue I did and maybe this will be of use to someone else...
Ended up force-shutting my macbook down then switching back on, as soon as the chime could be heard i pressed command R and kept both keys pressed until Recovery mode kicked in.
Internet Recovery came on which took approx 20 minutes (more about this here http://support.apple.com/kb/ht4718 )
Then 4 options appeared
1) recover with time machine back up
2) set up and install Mac OSX (with the Lion icon and reference to Lion for some reason, I had Snow Leopard to begin with)
3) get help online
4) repair or erase disk using disk utility
I decided to attempt to repair the drive but use the verification tool first which said the drive was fine??????!!!
Then clicked on repair disk, this took only a few minutes then it stopped after a couple lines.
While it was "repairing" the button changed to "stop repair" then changed back to "repair" so I took that to mean it had done what had to be done.
Then closed the utility screen whch prompted me to restart macbook after selected a drive to boot up from (only one option came up for me)
Did that and I was back into familiar territory and on my mac as I knew it ie snow leopard.
I did restart macbook just to make sure and it just booted up as normal, to snow leopard with the maverick install icon still showing in the dock.
Panic over. Not sure if / when I will give installing Maverick another try though....

Keep getting error 2 message after installing iTunes9

When trying to install the new iTunes I keep getting this error message after installation:
*Apple Application Support was not found.*
*Apple Application Support is required to run iTunes, Please uninstall iTunes, then install iTunes again.*
*Error 2*
I don't know how to fix this. I have tried multiple times to uninstall and reinstall. I don't understand how to fix this problem. From previous posts, I can't figure out where to go on my computer.

I too am having this exact same problem. Is it a coincidence that both of us have HP Pavillions'? Very interested in finding a solution.

HT4623 keep getting error message trying to update to ISO7

Time and time again I keep getting ERROR message when trying to update to ISO7 on my Ipad Retina and Iphone 4S.... help its driving me crazy

Thank you for prompt reply.... I finally got phone and ipad updated at 2300hrs tonight lol think I was lucky and got an opening in the rush ha ha ha well impressed with update.... got my alarm set for friday midnight to order 5S .... crazy gadget freak lol started with 3g , 4, 4S, missed the 5 as wasn't too impressed, but defo want Iphone 5S .... and I aint carzy teenager.... 60 next year lol Thanks once again for your help ...

I keep getting error up trying to update software any1 know y

Anyone know y I keep getting error come up whilst trying to update really need help ASAP please

All I can recommend is doing a reset (holdind home and sleep buttons until the Apple logo appears) and retrying. Other than that, a trip to the Genius Bar sounds in order. I'm really not familiar with dealing with iOS devices sans computer.

Error message when trying to install mavericks. It won't let me select a disk to install Mavericks on. Message says "This disk is used to Time Machine backups." It is NOT used for back ups. help

When trying to chose a disk on which to install mavericks I get a message that says "this disk is used for Time Machine backups" and cannot be used. Help!

I don't know what will help at this point. You should never update a system that has problems, unless you're absolutely sure that the problems are caused by a bug that is fixed in the update. With your backups in an uncertain state, you should not update or do anything else except start a new backup.

TS3074 When trying to install itunes on my windows 7 computer i get the error itunes setup is not a valid 32bit application. Any ideas to rectify please?

When ntrying to istall itunes on my windows 7 computer I get the error message pop-up "itunes setup is not a valid 32bit application" . Can anyone help please?

Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

This is the error message i get when trying to install itunes for the first time

I have never had problems with installing itunes before but on this computer the message says
could not access network location itunes\.
Have tried everything and need some help
No error codes just this message

download from here,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I tried do install mavericks from the App Store. Then a error message came up saying: an error has occured

Any way I can get mavericks ???

Did the error message show up when you began the installation or when downloading? If during installation, you may have the installation app in your Applications folder -> file name is "Install Mac OS Mavericks.app".
If the download failed you can attempt to resume it or, if that doesn't show up as an option, you can try to download again.
Note that before Mavericks begins an installation, it checks your hard drive to see if there are any errors on the drive and, if there are, you'll get an error message. If you go through the installation again, write down the specific error message.
Good luck,
Clinton

Getting error while trying to install ADRMS role on Windows Server 2008 R2 SP1.

Hello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar Mehta

Hello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar Mehta

An error has occurred when trying to download Mavericks from the AppStore, why?

I have an update available from the appstore to upgrade from my OS X Lion 10.7.5 to OS X Mavericks, but every time i click on the free upgrade button i get a message on the side of it that says an error has occured. Yet it does say what type of error. And i see it in the launch pad and it says "waiting". How do i fix this?
I have a iMac from mid 2011 with 4bg of mem, 2.7 GHZ intel core processor i5, and graphics AMD Radeon HD 6770M 512MB.
Can someone help me out here?
-Sebastian

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Is Creative Suite 6 and Captivate6 are windows8.1 compatible? Inform them of the errors you received when trying to install Captivate6 and the attachment has the errors I received when trying to install Creative suite 6.

is creative suite 6 and captivate 6 are windows 8.1 compatible? The attached shows errors when attempting to install.

You will have to copy and paste the error messages into your posting. Attachments are not supported for these forums.

Keep getting error when trying to instal Mavericks at the stage when computer is supposed to restart?

Similar Messages

Maybe you are looking for