Keep getting errors during recovery from recovery media?
My hard drive failed on my L655-S5065 Laptop.
I replace the Hard Drive, Purchased the Toshiba Recovery Media and updated the BIOS.
The first disc of the media loads fine. The second disc runs for about 20 minuntes then kicks back the error code (0A-0543-0000). After the first failed recovery I used the "erase hard drive" option on the recovery media, tried the recovery again and same error code?
Thanks for the help, Steve
I'd suggest contacting support and telling them what happens. It's possible that there's a problem with the discs, and if it hasn't been too long since you purchased them, maybe you can get another set. However, I don't know what the policy is regarding that.
- Peter
Similar Messages
-
I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?
I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
You are welcome to post any specific errors you are able to discover within your installation log to this discussion. Since you are using Windows then Exit Code 15 could mean one of the following:
Installer database is corrupted
Update pending to your operating system
Improper permissions set for the Media.db
The installation log file should provide additional insight into the exact error you are experiencing. Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages. -
I keep getting errors when updating from the Creative Cloud (49)
I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Just mad a movie and trying to burn it to a DVD but keep getting an error message. It reads:
"Error during rendering/encoding. There was an erro during rendering/encoding of the menus/slideshows. The burning process has been canceled."Enable Show TV Safe Bengt Wärleby lists items to consider about encoding issues in this topic: Multiplexing Error: Apple Support Communities
OT -
Can't Burn DVD - keep getting "Error during rendering/encoding"...Help!
I have a new IMac computer with Leopard and I'm having problems burning DVDs. I created a project using IDVD and have audio and pictures (imported individually from Iphoto) that I created into slideshows. I'm try to burn my final copy and continue to receive the "Error during rendering/encoding" message. I looked at earlier threads and saw some people had success when saving it first to a disk image however when I attempted to do that I received the same error. I know I have plenty of memory space since this project is very small. Please let me know if you have any ideas!!
Thanks!Hi,
I have a new mac with Leopard since a week, and I had the same problem ("error during rendering / encoding..."). This happened when burning to a disk image.
I tried a lot of things :
* very small project
* create a new user
* put pictures in a folder, and not drag them from iphoto
* change the theme
I still had the same problem.
The last thing I tried was to put all the files used by idvd on the hard disk (instead of of an external firewire disk).
It worked ! (with the small size project).
I'm trying to burn the large project again...
I will tell you if it succeeds...
Best regards,
Nicolas -
Getting error during reconciliation from AD in OIM
I am trying to reconcile one user from Active directory by using schdeled task.
I have used search filter as (&(objectClass=user)(extensionAttribute8=123456))
Getting following error:
2011-08-16 11:22:07,183 DEBUG [OIMCP.ADCS] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask : transformSingleMultivaluedData:: FINISHED
2011-08-16 11:22:07,199 ERROR [XELLERATE.APIS] Class/Method: tcReconciliationOperationsBean/ignoreEventData encounter some problems: {1}
java.lang.NullPointerException
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] ====================================================
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask : processUserChange : java.lang.NullPointerException
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] ====================================================
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] ================= Start Stack Trace =======================
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask : processUserChange
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] java.lang.NullPointerException
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] Description : java.lang.NullPointerException
2011-08-16 11:22:07,199 ERROR [OIMCP.ADCS] Thor.API.Exceptions.tcAPIException: java.lang.NullPointerException
at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEventData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEvent(Unknown Source)
Edited by: JRS on Aug 16, 2011 10:48 AMLooks everything fine to me.
Reconciliation rule for AD user object is active and the rule as below
User Logn is equals to ExtensionAttribute8
OR
objectGuid equals to objectGuid
And we have key field is ObjectGuid attaribute
Pls suggest what are other things to check. I need to resolve this ASAP.
Thanks again.. -
Keep getting error during Calendar sync
Phone: Torch 9810
Computer: MacBook Pro
OS: 10.6.8
BB Desktop: 2.40
Hi,
I've used a BB for quite some time always sync to my Calandar (iCal). Usually when I install an update to the BB desktop, the phone does not sync as well initially. Then it tends to work itself out. So, I kind of hate when the updates come out for this reason.
Recently, I updated to the reccomended version 2.40. If I sync everything together I get an error message (see below). I can sync everything fine except the Calander, if I sync the other stuff first by themselves, i.e. Notes, Contacts, Tasks.
Then I sync the Calander. It actually partially syncs the material but tends to leave out the newest data. It does show that the phone synced, but the sync never fully completes. I continue to get this message: "An error was encountered while syncing ZERO. Please retry the sync." I've never seen this error message. And, I've seen A LOT of error messages through the years while syncing. Please let me know if you have any suggestions on what I can do to solve this issue.
Thanks,
Don
Solved!
Go to Solution.Hey dgensler,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest performing the following to get the sync working:
1. In BlackBerry® Desktop Software for Mac go to Device>Forget Data.
2. Close down BlackBerry Desktop Software and unplug the BlackBerry® Torch™ 9810 smartphone from the USB.
3. Plug it back in and open up BlackBerry Desktop Software and then setup the synchronization again and test.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne ConnellyThanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system): 1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision: 3AHB
Interconnect: ATAPI
Burn Support: Yes (AppleShipping Drive)
Cache: 2048KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne -
Help I think when I went to restore my ipod touch the date was wornign on the ipod and not it is stuck in recovery moder and I keep getting Error 9. I have tried everything but nothing works can someone help me?
Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software."- it's taken from the Apple support web.
-
my iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore
Hey p0507!
Here is an article that addresses your error message, and can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Getting error during creation of recovery point and synchronization
hi all
i am using DPM 2012 R2 . i am getting following error during recovery point creation.
No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
i have tried " create a recovery point after synchronization" 6-7 times but its failed.
kindly help me to get out this issue
thanks in advance.
Early reply should be really appreciated.hi all
i am using DPM 2012 R2 . i am getting following error during recovery point creation.
No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
i have tried " create a recovery point after synchronization" 6-7 times but its failed.
kindly help me to get out this issue
thanks in advance.
Early reply should be really appreciated. -
Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred.
Been trying all night to sort out but just going around in circlesI have not seen a solution for that error but try:
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?
make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
copy the installation files to a desktop folder and install from there. -
Drive will not burn from itunes keep getting error...
Hi. When i try to burn from itunes i keep getting error " Attempt to burn to disc failed. The device failed to calibrate the laser power level for this media."
I have looked this up and seems to be a problem for a lot of people yet apple seem to be ignoring it from what i have read. I have reset ram it worked once but never since even after resetting it again. So any ideas. Checked for updates noting. This is realy annoying now and i am losing faith in something i like. So apple get of your arse and sort this problem out.
CheersHi martin wells1!
Rather than blaming Apple engineers, have you contacted support to arrange service on the machine? Hardware problems, traditionally, don't fix themselves. But that's where technicians come into play as a means to resolve those hardware problems.
If you get a "check engine light" in your vehicle, do you just drive around and wait for it to be fixed saying: "Man, I wish <insert car manufacturer> would fix my check engine light problem tonight."
I've encountered a similar error message on one (of many) MacBooks that I've come across recently, a service call later and a replacement optical drive... problem resolved.
Maybe you are looking for
-
To change my Home Page, Firefox wont accept the change. Instead there seems to be a default home page, that is, mywebsearch.com
-
Hi All. I am trying to get a report based on a web service to work. I have created my web service and page as per the instructions in http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/web_serv.htm#CHDIDJFH. When I test my web service in a
-
Using Numbers with JAVA Programming
I'm about to fail JAVA and require expert solution to this problem: When you take the year of the birth of Bill Clinton and add to it the year he took office plus his age at his last birthday, and then subtract the number of full years he has been in
-
SP01: 300 downloads of SP01 PL03! Give feedback here - or open a new topic
Hello, 2005A SP01 PL03 has been downloaded by more than 300 times. Feedback about issues is rare. Usually this means that no major issues occured and that the information given (e.g. in the documentation of DB and UI changes + potential compatibility
-
I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?