Keep getting "Failed to connect to server" message after changing out my old router to a new one. Cannot receive any new emails. How do I connect again?

What can I do to fix this?

Check the address of the router in your settings for Windows. It has probably changed. You might want to check the settings in the router itself as well.

Similar Messages

Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater

HT203808 Keep getting Apple ID or password incorrect message, have changed it about a dozen times, cannot update apps.

I am unable to use icloud, itunes, etc. When I enter my password, I get Apple ID or password incorrect message. I have tried changing it multiple times to no avail.

Welcome to the Apple Community.
Have you tried deleting the account from your device and then signing back in again.

Can't print pdf docs. Keep getting failed to connect to dde server. How do I fix?

I have Adobe Reader X and I can not open files, or print them. I keep receiving a fatal error-DDE server not found. I have tried reloading Adobe, rebooted, and nothing seems to work. I have no trouble accessing my browser, can print nonadoble files. Everything else is running fine. What can I do?

Hello,
In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
#Go to ''Tools'' > ''Options'' (or ''Firefox'' > ''Options'').
#In the Options window, select the ''Applications'' tab.
#In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
#On the right handside you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
Did this fix your problems? Please report back to us!
Thank you.

I keep getting a FORBIDDEN on this server message for Spanking Library

I have been visiting the library of spanking fiction for ages, having posted stories there. Now, today I am suddenly told that visiting is forbidden on this server. How can I sort this please?

If you have any further problems with the co.cc URL you can also try the alternative URL for the Library of Spanking Fiction which is:
http://www.spankinglibrary.tk/

HT4519 I have a yahoo email account and i keep getting an "error connection to the server failed"

The email account i have always used on my ipad mini is through yahoo. Now i keep getting an error "connection to the server failed" when trying to access my email.

its a common message but could be due to several possible causes
try this
close the mail app by double tapping the home button, swipe the screen until you see the large icon of the mail app. Swipe the app up and off the screen to close. Tap the home button to return to home screen. Open mail app again.
if that didn't work, then...
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
Unplug your wifi router for 5-10 minutes and at the same time reset settings on the ipad
settings/general/reset/reset all settings
(no data will be lost)

I keep getting "the network connection could not be established" error message when trying to update my iPads and iPhone to iOS 5.1

I keep getting "the network connection could not be established" message when trying to update my iPad, iPad2 and iPhone4 devices using either my iMac or MacBook. The Macs and iOS devices are apparently working correctly otherwise. Problem started about a day ago when I connected one of the iPads to my iMac and iTunes notified my of an update for the device. I tried and got the above message. Tryied other iPad2 and iPhone4 and get the same message. Also, get same message when trying to update using the MacBook. My system SW is 10.7.3 on the iMac and 10.6.8 on MacBook. iTunes is version 10.6. Have gone thru the check list of things to check and have re-started. Would appreciate any ideas. Thanks.

Another user named Springbk posted a fix that worked for me as I was having the same problem today:
I Changed my DNS settings to OpenDNS
On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
change DNS by adding ( + )
208.67.222.222
then
208.67.220.220
click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

I can't log on to itunes account. Keep getting the error: Connection Manager::invoke::Failed to find service connection url. What can I do?

I can't log on to my itunes account. Keep getting the error: "Connection Manager::invoke::Failed to find service connection url". What can I do?

Hi, Buster1932.
I would recommend logging out of your account then logging back in. If the issue persists, see the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

" iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connention is active and try again."

Installation keeps getting failed on some CC applications

After performing clean install Mac OS X 10.9 (Mavericks), I tried to install Adobe CC applications back on my Mac couple days ago.
While other CC applications had been installed without a hassel, I find two applications that kept failling to be installed.
Audition CC and Bridge CC are the ones I am having trouble with.
When I try to install it, it fails at 3% or so. (It varies after reboot, but keeps failing.)
After I click "Retry" as the installation keeps failing, the progress bar reaches up to 41%.
Then no matter how many times I click "Retry", installation gets failed instantly.
The error message says: "Installation Failed The download appears corrupted. Please try again after a few minutes.(-60)"
I've tried installing them both on my iMac and MacBook Air, but the same installation failure occurs.
I've tried installing Audition CC and Bridge CC on my MacBook Air at home, but the same installation failure occurs.
I've tried safe boot. I've tried wating couple days. I've tried re-clean install MacOS X. I've tried changing locations. I've tried contacting Chat Support.
The same installation failure occured.
I suspect that the problem is at Adobe's end, but I am not certain.
Is there any workaround for me to install Adobe CC and Bridge CC?
Thanks in advance for your help.

Hi 상욱군,
Please try installing in the root user account and check.

I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working. HELP....

I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

I keep getting a 'Looking for backup disc' message from my Time Capsule.

I keep getting a 'Looking for backup disc' message from my Time Capsule. I have set it up several times without any apparent problems (I have even done a Hard and Factory reset). Everything seems fine until I ask Timemachine to 'back up', and then the problems start.
Any ideas?

I had the exact same problem. I bought the Time Capsule this past July and it worked fine for about a month then it told me it hadn't backed up in 10 days and was stuck looking for the backup drive. I called Apple and they said the reason was that the Time Capsule was in Bridge mode. I launched Airport Utility and sure enough, it was. I changed it to DCHP and NAT (Airport Utility -> Network tab -> Router Mode). After updating the Time Capsule, I couldn't even get on the Internet, let alone do a backup. A logged into the software for my cable modem and discovered that it too was in Bridge mode.
It turned out (for me) that neither should be in Bridge mode (which is for connecting two networks). Your cable modem only has one IP address. Your Time Capsule should be doing the NAT (Network Address Translation) which translates the internal IP addresses on your network to the one IP address your cable modem has. When I switched my Time Capsule to DHCP and NAT, it conflicted with the fact that the cable modem was also trying to do this. The answer was to turn this off on the modem (allowing all the packets to just go through the modem to the Time Capsule and let IT do the NAT). I did that last week and since then, my Time Capsule has been working perfectly.
1) Go to your cable modem (via a browser, enter "http://192.168.100.1"). Log-in and find the setting that indicates NAT. If you're uncomfortable doing this or can't find it, call your cable company and ask Tech Support to do it for you. They can do it remotely.
2) Launch Airport Utilty. Go to the Network Tab and change the router mode to "DHCP and NAT".
3) You may need to restart your modem and Time Capsule. I can't remember if I had to or not.
I hope this helps. I tried many things but this is the only solution that fixed it for me. And it makes sense. Only one device, the cable modem or the Time Capsule, can be doing the NAT.

I cannot send email from my ipad. Getting address is rejected from server message.

I cannot send email from my ipad. Getting address is rejected from server message.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev

Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>

Trying to redownload but keep getting a "lost connection error"

In the past, I had some problems with my laptop so I recently re-installed Windows 7 yesterday. I got everything running fine. But today, I am having problems with flash player. Youtube videos don't play correctly and some websites don't display like they are supposed to. So, I tried redownloading adobe flash player, but I keep getting this "Lost connection" error. What is the problem and how do I fix it? I'm using FireFox, btw. It seems to work on Google Chrome but I like using FireFox better.

Try using these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Keep getting "Failed to connect to server" message after changing out my old router to a new one. Cannot receive any new emails. How do I connect again?

Similar Messages

Maybe you are looking for