Keep getting ifmkw is compressed and wont boot help please

neede help

Sorry, never heard of "ifmkw is compressed".
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • HT201210 I,m trying to restore my phone but I keep getting Error code 21.... help please

    I,m trying to restore my phone but I keep getting Error code 21.... help please     iPhone 4S

    Take a look at this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    You could just update or uninstall the security software on your computer and then test again.

  • HP DV4-1155SE Black Screen and Wont Boot. Please Help!

    Hello all I am working on an Hp DV4-1155SE. I have tested the memory modules, the hard drive and everything else that I can take out of the computer easily. Everything works but!, The laptop will not boot into the bios or anything else. Black screen, wont boot and i have the bios file that HP supplies on the support page of the site. I have looked at the instructions that a few people have posted about re flashing the bios and that does not seem to help me at all with this AMD processor. If anyone can please offer any help at all this would be greatly appreciated.
    Thank you!

    I will search on int 19h....thanks.
    My problem started before the bios-screen.
    This is what I tried this evening:
    - Disconnected all non-essential devices...no effect.
    - Cleared the CMOS...system booted to OS!    Screens still garbled! 
    - Put in an older graphics-card...No artifacts! 
    - Put my MSI NX6600GT (AGP) back in...screen grabled while booting. Once in OS everything
      looks fine at first. Later I noticed some odd random pixels. Playing movies is working fine.
      Playing 3D games results in all kinds of strange looking artifacts.
    - Installed the latest NVidia- drivers...no effect.
    Is my problem still MOBO related or Graphics Adapter?
    Any further advice?
    Thanks!

  • New board wont boot, help please

    Hi.
    I have just bought MSI K9A2 Platinum with a quad core phenom 9950 black edition cpu. and ati 4850 pcs 1GB gddr3 pci-e  2x 2BG corsair ram.
    I built the rig but when i push the power button everything seems to work, fans spin, cpu warms up graphics card warms up (the heatsinks) but the monitor says no signal.
    Sometimes the monitor goes into standby and other times it stays on but with no picture.
    Has anyone come across this problem and does anyone have any ideas why this is happening?
    I have cleared bios, unplugged all usb pins etc. tried with 1 mem stick and 2 , and un plugged hard drives.
    Many thanks for any help.

    Thanks for all the suggestions.
    The board is now booting. one of the memory sticks is dead, wont boot with it in, take it out and its fine
    The problem i am having now is i cannot create an array.
    in the create an array options, option 1,2,3 don't do anything but 4 does.
    I managed to format the drive and the OS is loading as i type, but when pc boots it says no array created, so if I am getting the Sata speed right, if an array isn't created then it wont be running at full speed.
    Ive tried changing bios setting in sata control bit... IDE, Raid and  a....... cannot remember other options, but none of them work.
    OS is now up and running, everything seems to be working. just strange that it wont allow me to make an array.
    Any ideas thanks

  • HT4623 my phone keeps stalling during the restore and update any help please ?

    Can anyone help me ive been at this all day and no luck?

    Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem, charge your iPhone with Wall Charger for 10 minutes even if it does not show it is charging. Then you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.

  • Ave problem getting on wi-fi i keep getting error code n.28 can anyone help please thanks Christine

    HI i am having problem with wi-fi i am getting error code n.28 can anyone give me help.
    Thanks

    When you googled "iPad n.28 error" what do you get?

  • My menu bars go invisible and wont work, Help please?

    Ok, the problem is that the menu bar on the top of the screen, you know where it says "file" "Edit" "Image" etc. will not work. When I click on "file" the window that opens basically becomes see through and I'm not able to click on anything like "save". My main concern is my Photoshop as I have work to do in it, but the same thing happens with my Adobe Audition, Reader, and basically every other Adobe program. I'm really in a pickle here as I have to turn in 2 canvases by the end of today. Can someone please me fix this?
    Thanks in advance.

    Sounds like a popssible display driver and/or resource problem.
    What version of Photoshop are you running?
    What operating system and video card do you have?
    Have you rebooted, and does the problem recur after?
    Is this issue reproducible or intermmittent?
    Do you have any 3rd party plug-ins installed?
    -Noel

  • Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? by stephenftlaud

    still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud

    Hi,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

  • Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

    still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

    Hi,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

  • I just installed new 8gb ram in my MBP 2010 and it beeps 3 times and wont boot.

    I bought 8gb DDR3 1066 mhz to install on my MBP 2010 and it beeps three times during boot and wont boot. I looked at other threads and it seems like no one has found an answer. It looks brand new with no obious problems.

    Macs can be very fussy about RAM... It is Important to get the Correct and Matching RAM
    You can use these Links to check which RAM is suitable for your Mac...
    http://eshop.macsales.com/shop/apple/memory/
    http://www.crucial.com

  • Yes i keep ashing the same question i keep getting the same answer and it is not resolving the problem

    YES I KEEP ASKING THE SAME QUESTION I KEEP GETTING THE SAME ANSWER AND IT IS NOT RESOLVING THE PROBLEM AND CHAT KEEPS SENDING ME BACK TO THE FORUMS THEY SAY THEIR EXPERTS WILL BE ABLE TO RESOLVE THE PROBLEM BUT IT IS NOT RESOLVED YET I KEEP GETTING THE SAME ANSWER FROM FORUM EXPERTS WELL THAT IS NOT WORKING I NEED A SOLUTION THAT WILL WORK I PAID FOR THIS AND I WANT TO USE IT BUT I CANNOT
    TRYING TO ACTIVATE A trial version of photoshop elements 7.0 disc worked till in the middle got an erroe fur and animalskin file missing checked dvd and it had a scratch so 3 times i downloaded a trial version of photoshop elements 7.0 from adobe.com but when try to activate get invalid serial number the website said have your serial number ready to activate which i do because i am getting it right from the dvd case it is registered i am signed in and chat just keeps telling me it is too old try the forums which i have many times with no resolution but they mark it as assumed resolved premeir elements 7.0 from the same dvd case is on why can't i activate trial version of photoshop elements 7.0 my computer crashed and i had to restore then i am now trying to put the programs
    maybe i can buy or exchange the dvd of photoshop elements 7.0 without because my serial number is good so i maybe just need a new disc being this disc is scratched i've got 40 to 50 hours into this 1 trial version of photoshop elements 7.0 more than i have in the whole computer restore and all the other programs i have restored have windows xp service pack 3 or 3.5 and net framework 4.0 and all the important and required updates i also have an open case which i am getting no where either case #213952591 which i responded to within 4 days as not resolved but i am still getting no help activating this trial version of photoshop elements 7.0
    24 Views
    Tags:

    YES I KEEP ASKING THE SAME QUESTION I KEEP GETTING THE SAME ANSWER AND IT IS NOT RESOLVING THE PROBLEM AND CHAT KEEPS SENDING ME BACK TO THE FORUMS THEY SAY THEIR EXPERTS WILL BE ABLE TO RESOLVE THE PROBLEM BUT IT IS NOT RESOLVED YET I KEEP GETTING THE SAME ANSWER FROM FORUM EXPERTS WELL THAT IS NOT WORKING I NEED A SOLUTION THAT WILL WORK I PAID FOR THIS AND I WANT TO USE IT BUT I CANNOT
    TRYING TO ACTIVATE A trial version of photoshop elements 7.0 disc worked till in the middle got an erroe fur and animalskin file missing checked dvd and it had a scratch so 3 times i downloaded a trial version of photoshop elements 7.0 from adobe.com but when try to activate get invalid serial number the website said have your serial number ready to activate which i do because i am getting it right from the dvd case it is registered i am signed in and chat just keeps telling me it is too old try the forums which i have many times with no resolution but they mark it as assumed resolved premeir elements 7.0 from the same dvd case is on why can't i activate trial version of photoshop elements 7.0 my computer crashed and i had to restore then i am now trying to put the programs
    maybe i can buy or exchange the dvd of photoshop elements 7.0 without because my serial number is good so i maybe just need a new disc being this disc is scratched i've got 40 to 50 hours into this 1 trial version of photoshop elements 7.0 more than i have in the whole computer restore and all the other programs i have restored have windows xp service pack 3 or 3.5 and net framework 4.0 and all the important and required updates i also have an open case which i am getting no where either case #213952591 which i responded to within 4 days as not resolved but i am still getting no help activating this trial version of photoshop elements 7.0
    24 Views
    Tags:

  • How do I unlink my Apple ID from another persons I tunes account? I keep getting their security questions and one of my emails can't be used

    How do I unlink my Apple ID from another persons I tunes account? I keep getting their security questions and one of my emails can't be used. It keeps telling me I its linked to another account but it shouldn't anymore. Plus my security questions belong to the other person and it has no reset option

    depend on the version of itunes and if it's OS X or windows i suppose
    in itunes on ny computer in the upper right corner left of the search bar there is a circle with a black siloet  and my name beside it
    if I click on the v beside it I can a menu with logout as an option

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I keep getting a rainbow wheel and a message that say webpages are not responding

    Can someone help me?  I keep getting a rainbow wheel and a message that says webpages are not responding.
    Thanks,
    Eric

    All web pages or specific web pages?  Provide an example link.
    Does any other internet-related utilities work for you, e.g., mail?
    Do you have a little green dot in you Network preferences next to Ethernet or Airport, whichever one you are using?

Maybe you are looking for