Keep getting invites to a calendar we are not a part of (set up as Exchange mailbox)
Hello,
I am hoping someone here can shed some light on an irritating problem that we are having with Exchange.
We were asked to setup a mailbox for a group, essentially just to give them a calendar.
The calendar was created successfully, but now 3 of the systems people get invitations every time someone sends out a calendar invite. I have added the calendar to my shared calendars and looked at the permissions. We are not on there, but we
are still getting invites. I was asked to remove someone from the calendar, but they are also getting invites even though they are not even a part of the company anymore. I went into their account in Exchange and hid them, and they are still listed
on the invite. Where do we look to figure out how we are getting added to these e-mails. I don't get it. We are not listed anywhere in the permissions, but we still get constant invites.
Thanks,
mtaffer
mtaffer
You would not necessarily need permissions to a calendar to receive invitations.
Sometimes this happens when delegates are set to receive meeting invitations. In this case, I don't see why the systems people would have been added as recipients but that would be one thing to check.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.
Similar Messages
-
Stop getting invites for shared calendar
Someone in my team is incorrectly getting meeting invites for each new meeting that is created on a shared calendar for which he is a delegate, but not the owner. The shared calendar is a Google Calendar that is part of a Google Apps business account, and is being synced to Mac Calendar as a CalDAV account. Furthermore, there are other individuals that are also setup as delegates for the same calendar, who are not receiving meeting invites for this calendar. Does anyone know why this would be happening, and how to fix it so that this person no longer receieves invites for the shared calendar?
Kenneth,
What happens if you check option at the bottom of that window?
✓ Turn off invitation messages in Notification Center
You won’t receive event invitation notices in Notification Center. You still receive notices in Calendar or by email. -
I'm trying to update my itunes and I keep getting the error:the feature you are trying to use is on a network resource that is unavailable.
Which particular .msi file (or files) does the message (or messages) go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)
-
I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the control.
Has anyone else experienced this?After deleting the backups, go back to Settings>iCloud>Storage & Backup and make sure iCloud Backup is set to On (if not, turn it on).
-
Question
when i try to use hulu acc.i keep getting the same message / sorry we are unable to load the player please check your internet connection clear your browser cache andI found a solution! (at least, for my platform; Windows XP Home SP3, Firefox 4.0.1) =) Go to http://labs.adobe.com and download the Release Candidate 1 version of Adobe Flash 10.3.181.5. I swear, the Second I installed this, it worked INSTANTLY xD. Best of luck to you! (and anyone else who sees this =)
-Erik P. -
How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks
If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.
-
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port. Recently installed a portable hard drive for back up purposes. Related?
Does your printer have a slot for an SD card? Is there are card in the slot? If so, the computer is trying to mount that card as an external device. It might be corrupted so that it can't be read.
-
If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be? I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.
If you haven't already contacted iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I've tried to intall ios 7 but on the activation part on the phone i keep getting a message saying 'your iphone could not be activated becayse rge activation server cannot be researched. Try connecting your iphone to itunes to activate, or try again in a few minutes'. However when i plug my phone into the computer itunes has an error message saying 'We could not complete your itunes store request. The network connection was rese. Make sure your network connection is active and try again'. How do I do this? Thanks.
unfortunately no, a million people are attempting to update their phones right now, and thus activate them. Patience will have to suffice.
For the future, I would recommend not updating essential work devices on the launch day -
i want to install imovie 10.0 but keep getting message : your computers video card does not meet the minimum system requirements ? what should I do ?
There are some suggested solutions in this thread:
https://discussions.apple.com/message/23486450#23486450 -
Trying to edit my payment info. I keep getting the message that my number is not valid for the type of card I have selected. I have a VISA card. I have typed in the number 4 times, but same message pops up.
Thoughts?You are probably entering your Visa's security code incorrectly. Here's how to find it:
http://support.apple.com/kb/HT3541 -
Im trying to setup my phone and I Keep getting this error.
"Your iPhone could not be activated because the activation server cannot be reached. Try Connecting your iPhone to iTunes to activate it, or try again later.Are you running one of the beta versions of iOS 7?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider? -
I keep getting a message saying this accessory is not optimised for this iPhone, what does this mean? I haven't downloaded anything
If you are getting it when your iPhone is not connected to anything it probably means there is line/debris that is causing a short between the pins on your dock connector. Get a soft brush and clean it.
Maybe you are looking for
-
How to do this ...help me
i am using below query in a procedure i.e open result for SELECT get_clob_value (table_name, KEY) as codes......."result" is out parameter with sys_refcursor as datatype(i.e result out sys_refcursor) in the below query get_clob_value is a function SE
-
JEE 6 Tutorial example missing
I have downloaded the Java EE 6 tutorial examples. The hello2_basicauth example on basic authentication is missing. Does any one know why can that happen? Thanks in advance, Roberto
-
Best router combination for FIOS and Apple TV
I have a Power PC Mac with Verizon FIOS wired router. I would like to add Apple TV, and I am wondering if I replace my wired router with a wireless one, would that allow me to use Apple TV? If so, what router would anyone recommend as working well wi
-
FileInputStream FileNotFoundException
OK, for some reason I keep getting a FileNotFoundException in a function that is supposed to load a BufferedImage from file. Take a look at the function and tell me what you think could be the problem. public static BufferedImage LoadImage(String Fil
-
* HELP, WON'T DISCONNECT *
I turned my itunes to Manual, now, itunes says it's done uploading but my ipod still says "do not disconnect" The "enable disk use" button is grey so i can't uncheck it. HELP!