Keep getting lock ups. Now its a black screen and will not respond even when unplugged .

I cannot reboot as i cannot see anything on the screen.  Ive tried to restart and tried control alt delete, and f8 on start....still no response?  Anyone have ideas?

you probably have a bad video card. The decision would be up to you but for that PC because it was so unique I'd look for an Authorized HP Repair facility in your area, that way they will know how to take it apart. The video card in this system has a heat sink attached to it as well and it pretty involved. You can replace it on your own, but it would be pretty involved. Here is a link to some instructions on how to open the case.
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=useCategory&lc=en&dlc=en&cc=us&lang=...
Your video card is the
Video graphicsGeForce Go 7600
PCI Express x16 interface
MXM connector
256 MB
good luck
bill
I'm a HP employee

Similar Messages

  • I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

    I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

    Have you tried clearing Safari? Clear Safari, close Safari completely and reboot your iPad. Try again.
    Go to Settings>Safari>Cookies and Data.
    If you are running iOS 5 or iOS 6 you close apps like this. Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    If you are running iOS 7, you close apps this way. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

    My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod has a black screen and  will not turn on how can i fix it

    I have tried everything that i can to get my ipod to turn on.  It has a black screen and hasnt done anything atleast 2 weeks.  Please help.

    1. Can you get it to light up doing a hard reset and holding the buttons down for at least a minute?
    2. Is it charged up?
    3. Is the USB power cable good?
    4. Can you get iTunes to recognize using recovery or DFU mode?
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT1414 Hi there, my I pad series 2 has a black screen, it will not power up when attached to a laptop, and only shows black screen and Apple icon when attached to a mains power source. Any thoughts please? Allan

    Hi there my Ipad 2 has a black screen, will not power up and will only have an Apple icon when plugged into a mains power source. It will not power up when connected to a laptop. Any thoughts please?
    Regards,
    Allan

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • HT4061 My iphone has stopped working but the lock button IS working...when it stopped working it had a 50% charge left on the battery...it simply went to a black screen and will not turn on...my phone will not charge on the computer or the plug socket

    Hi
    My iphone 4 has stopped working...the lock button IS working...when it stopped working it had a 50% battery remaining...it was working when I last used it and when I returned it had a blank screen....it will now not charge or connect to itunes when plugged into the computer and it will not charge on the plug socket....I think the last iOS op system updated was 5.1.1....please help

    Try holding both home and power buttons until apple logo appears (ignore on/ off slider) and then let go. No data will be lost.  Wait for phone to restart

  • HT201210 My iphone 4s completely shut down to a black screen and will not come on after I received the restore iPhone message.

    Tried restore through Apple ITunes software and received an error message unable to restore device.  Now my phone will not turn on at all. Yet it is charged.  I can't do anything.

    Hey there Maggie,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the blank black screen issue with your iPhone 6 Plus.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Cheers,
    -Jason

  • My iPod has a flickering black screen and will not turn on. What can I do?

    I accidentally left my iPod in my car for a few hours. It reached about 80 degrees outside, so I am worried. It did not turn on at all. Afterwards, I let it cool down and it still will not turn on. I plugged it into my laptop (PC) and it still does nothing. If flickers between two shades of black, but it does not do anything. I am starting to think it may have affected the battery. I have been experiencing problems with it not wanting to turn on without being plugged in for months now, but I did not really do anything about it.
    I need help. I do not know what to do, so any form of help will be greatly apreciated!

    I was afraid of this, to be honest. I kind of figured that I broke it completely.
    I no longer have a warranty on it because I have had it for about three years, so I do not even know if it is worth taking in or if I would be better off with buying a new one.
    If I were to replace the battery, would that help with the display or would it still be flickering a black screen?
    * Sidenote: I do not like that I am not too savvy when it comes to Apple products, so I apolgize if it seems like I am repeating myself or sound confusing.

  • My new iPhone 6 plus just went to a black screen and will not turn back on. If you hit the home button for siri to come on it still works, and if you plug it into the wall it makes the vibrate noise. The screen just won't turn on.

    I was looking up a song on the internet, and my internet was being slow, so i was going to the settings to turn internet/wifi off so i could use data. When i did that the screen just went completely black. I didnt know what happened so i plugged it into a circuit into the wall to see if it needed charging. It made the buzz noise when i plugged it into the charger, and siri still works if you hold the home button down. I don't know what to do to get it to turn back on... If anyone knows what to do please help. thanks !

    Hey there Maggie,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the blank black screen issue with your iPhone 6 Plus.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Cheers,
    -Jason

  • My 4s is locked on the icloud back up screen and will not reset by holding down power button.

    My 4s is locked on the iCloud back up screen.  It will not reset by holding down the power button.  Please help!

    Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

  • My iPad Mini has a black screen and does not respond to anything.

    I got my iPad Mini 6 days ago, and this morning I woke up to it overheating (to a point which any contact with it, or the case) was painful. Along with this overheating, the screen was and still is black. The iPad is not responding when I try to turn it on, off, hard reset it, etc.. It has not been taken off charge in approximately 6 hours, so I highly doubt lack of battery is a reason.
    HElp, please. And thank you in advance.

    Time to make an appointment with Apple.

  • Satellite A200 13M - black screen and will not switch off

    Hello
    I hve just purchased a *Satellite A200 13M*. At first power on, Windows Vista seemed to be correctly installed and internet connection (wifi) was working. The Norton programme was updated, and I was able to download and install OpenOffice. However, as OpenOffice had reported a small amount of disk space available (55 Go) I tried to see the Hard Disk in the browser.
    I clicked on Configuration panel, and waited for it to open. At this point, the mouse-arrow froze. After some time, I tried Ctrl, Alt, Del, and the system asked if i wanted to shut down. I did so, and a new screen announced that Windows was shutting down. This screen then froze in its turn. I waited for some time, and then tried to switch off with the power button. The screen went black.
    However, the blue power light remains on, the fan is still turning, but nothing i do seems to wake the machine up. I have called the maintenance service of the shop I bought it from (Darty) but they are overloaded and said they would call me back in a day or two (!). Is there anything I can do in the mean-time that might allow me to continue working with the machine.
    Thank you
    Tim Mason

    Sounds strange! But it’s a computer and sometimes such machines do {color:#ff0000}strange{color} things ;)
    Anyway… try to remove the battery from the laptop and disconnect the AC adapter.
    Wait about 20-30min and connect everything again.
    Then try to power up the notebook. If it’s a not a serious issue the notebook should starts again!

  • My iPhone is frozen at the lock screen and will not unlock

         For the past few months my iPhone 4S has been not acting good since I updated it to iOS 7. At random times it will go to a black screen and not respond for certain amount for time. Well today my iPhone went to that black screen and would not respond. Once I had someone call my phone the black screen went away and started acting normal as usual. Then once I tried to slide and unlock my phone it would not respond, When I tried to connect it to iTunes it connects and backs up but it will not restore. It had be stuck on the lock screen for almost 3 hours. battery life shows 100%. It shows the time as 8:38 because that is the time it stopped responding. The slide to unlock is still glowing but I can not slide to unlock my phone.
         I have no clue on what is going or how to fix the problem. Could someone  please help.

    Hello, John2295. 
    Thank you for visiting Apple Support Communities. 
    You may find this article helpful in troubleshooting this issue.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Jason H.

  • My Ipod touch has a blank screen and will not turn on. I have chaged it for a hour and tryed troubleshooting but nothing works. i need help getting this to work

    My ipod touch has a black screen and will not turn on. i have charged my ipod and tryed troubleshooting but nothing seems to work. what can i do to have my ipod turn on again?

    See Here...
    Frozen or unresponsive iPod touch
    Try this First... You will not lose any Data...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • HT201210 i keep getting error code 37 on my ipad 1 its in dfu mode and will not restart pls help

    i keep getting error code 37 on my ipad 1 its in dfu mode and will not restart pls help

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3125

Maybe you are looking for

  • EJB CBS Build Error: No folder found for attribute meta-inf

    I'm trying to activate my EJB DC that works properly when built and executed/deployed in the portal. But in CBS it fails to build and we got the following error trace: This is the error trace:   [pppacker] Packing public part 'client'   [pppacker] ER

  • Conversion of an actuate report to BI Publisher fails

    Hi all, After I started an conversion of an actuate report to BIP using the conversion tool (version 2), the batch process just stops. It writes successfully to the logfile that some of the elements have been converted, i.e. "2010/02/09 04:02:462 Ele

  • ITunes purchases Playlist missing

    Hi, Bought a new MacBookPro after previous one was damaged. My list of purchases from itunes is missing despite authorising etc. All purchases are recorded on my Apple account but wont show on screen. Has anyone come across similar?

  • Whats the datatype for the time in the format mm:ss.ms

    Hello Sir, I wanted to create a table with a field called time. what should be the datatype for this field contains the value as in the format mm:ss.ms(04:53.0). waiting for ur reply. regards pannar

  • What happened to the finder sidebar menu?

    I have had to spend sooooo much time trying to locate files that I just closed! What happened to the Finder menu that listed TODAY, PAST WEEK, etc?  It's nervewracking!  I don't want to open the files but upload them.  I don't like that I can't just