Keep getting no 80 conductor cable
i keep getting "Secondary IDE no 80 conductor cable installed" tried replacing the ide cable but didnt werk.
mobo is msi k7n2 delta L
im using
primary master-20Gig HD
primary slave- CDRW
secondary master- 160 Gb HD
secondary Slave- 40Gb HD
sorry cant use the search function.... its too bloody slow
220Mb_HardDrive,
Then buy an 80 wire cable on your Hard Drive.
You can see the 40 and 80 Conductor Ribbons next to eachother in this picture:
Richard
Similar Messages
-
I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?
m1doc,
Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country. -
Why do I keep getting the message that iTunes is quitting working? I have reinstalled iTunes and I have checked the wifi twice. I have even put the internet access cable directly into the laptop. The message says that windows will look for a solution but never offers any solution.
Try disconnect your internet, then launch iTunes.
Connect your device, then reconnect your internet.
See if this resolves the issue. -
My Seagate external 250GB hard drive ejects improperly without command. I am trying to use Time Machine to backup my macbook via usb cable... I keep getting the message that the disked ejected improperly... Any solutions...
You are not alone. Thousands have this problem, on various models of Macs. Short answer, it has something to do with the disk going to sleep (possibly?). You can't do anything about it and Apple won't address the problem. Maybe you should buy a time capsule. Just keep giving them money and use their proprietary equipment.
For a more complete answer, see this thread (all 65+ pages of it with NO SOLUTION IN SIGHT... except for some 3rd party solutions that sometimes work, sometimes don't): Disk Drive ejecting itself -
I keep getting the message sync complete but my ipod nano 3rd generation is not syncing, any ideas. I have used 3 different cables, reinstalled itunes to the latest version. My nano shows in the side bar of i tunes
There are instructions for starting it on this page : http://support.apple.com/kb/TS1567
-
I keep getting 'check signal cable; on Samsung tv when connecting macbook using HDMI cable
Please help, I want to connect my laptop to my Samsung plasma TV. I am using a mini display port to hdmi adapter and then a hdmi cable to the tv. It keeps showing a 'check signal cable' error message.
I have tried another HDMI cable (which works on another device) but it still does not work.
Hep please
ThanksOK, OK, I think I've solved it. Once again, I'm no techie but I hate not solving a problem, so I dug deeper,learned Korean last night and found thid solution - it's free and takes one minute.
As I thought originally, the problem stems from the Samsung expecting a TV signal in the HDMI port so you have to tell it it's a computer signal.
Go from the Mac HDMI socket to the Monitor HDMI socket with an HDMI cable.
Go to the Samsung input/source button on the remote and on that screen select tools.
Select 'edit name'
Scroll down to PC and press enter. It should now read HDMI - PC
Under apple 'system prefs - displays, select your monitor pref - mine is 1080p
and... BINGO, it should work.
If it works for you guys, I accept gifts of beer and public praise with no problem. -
How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
ThanksIcapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced. -
Ipod will not restore, I keep getting error message 1604
I have an Ipod 3rd generation touch and when I was syncing my ipod it asked if I wanted me to restore it. I went through the step to restore the ipod and but it won't restore and I keep getting message 1604....does anyone know how to fix this ! !
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above from:
http://support.apple.com/kb/TS3694 -
Help I think when I went to restore my ipod touch the date was wornign on the ipod and not it is stuck in recovery moder and I keep getting Error 9. I have tried everything but nothing works can someone help me?
Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software."- it's taken from the Apple support web.
-
I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.
Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
Please help. I simply connected my iPhone 4s to my Dell laptop (Win 8) which connected to iTunes automatically (which it normally does) and was told that I needed to update my software (I believe for both iPhone OS and iTunes). I tried to update and now my iPhone won't work at all. I just keep going in circles trying to restore and recover and I keep getting the error message: The iPhone "iPhone" could not be restored. An unknown error occurred (14). All I see on my iPhone 4s screen is a cable connector, a little up arrow, and an iTunes symbol--and nothing else works.
http://support.apple.com/kb/TS3694
-
I had to change my hrowser to Firefox because Internet Explorer 9 doesn't work with my ancestry.com program. I can't uninstall Internet Explorer 9. I got Firefox 4 and it didn't work either. I started having problems with my printer working at all then. l was told to go to Firefox 3.x. I looked and there is no 3.x it is 3.5 or 3.6. I downloaded 3.6. Now I keep getting a alignment page and end up having to shut off my printer. I'm using way too much ink. I'm almost out with no hope of getting more ink until I get paid. I can't find anyplace that says to update a driver or that I need a plug-in or what might be I've done everything I know to do.wrong. It has new port cables. Do you have any idea what could be wrong? Do I need to uninstall the printer and reinstall it again? daisy
I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it. -
My iphone5 is stuck in recovery mode and keep getting error message 4014
Iphone5 stuck in recovery mode. Keep getting " could not be restored" message and error code 4014
Someone please helpHello Nigel38,
Thank you for the details of the issue you are experiencing with your iPhone. I recommend the following steps for error 4014:
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
HT201210 keep getting error message when trying to update iOS to 5.1.1
I have had no trouble updating the several iPads under my charge at work, however can't update my own. Am using iOS 5.1 currently on original iPad. I go to settings and it looks for any updates available and I click install to 5.1.1 but keep getting error message saying there was an error when trying to update. I am on my home wifi on my iPad. Have done same procedure with about 5 other iPads with no trouble. What can I do?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Maybe you are looking for
-
Urgent help with memory issue (ORA-04031)
Hi Geeks, Came Across this below error in alert log in of our databases. Interestingly this error only pops up while the database backup runs. Below are the memory parameters. memory_max_target big integer 14G memory_target big integer 13G pga_aggreg
-
Deploying WAR file with jdev 11g in weblogic 10.0
Hello, I´m Facing a problem deploying a simple aplication in Weblogic with jdev 11g here´s the Error Message : 2009-05-06 13:52:41.781: Writing WAR file to C:\JDeveloper\mywork\Application3\Project1\deploy\webapp1.war 2009-05-06 13:52:41.781: Wrote W
-
AP Cheque Run - Sort Alphabetically
Hello everyone, We are in the process of completing our user acceptance testing for E-Business R12.1.1. One issue is the ability to sort the cheque run in alphabetical format. At the moment, they are sorted in ascending order by cheque number. How do
-
I have lost my iphone how do i lock it?
How do i erase and lock my iphone , i have lost it?
-
Editing Contacts on the iPhone 4
How can I add a field under my contacts for home phone # or business phone #? When my contacts were transfered from my Blackberry to my iPhone 4 it added mobile, business and home phone # fields. However, when I try to edit an existing contact or a n