Keep getting this error message about library backup...
When Itunes is running, after a little while it gives me this message saying +"Cannot backup library. You do not have enough access priviledges to perform this action"+ What does this mean? Everything is running fine otherwise. Btw, I am running Windows 7
On a side note, I recently just lost all of my playlists and music and had to reload everything because ITunes just decided on its own to wipe everything out. Needless to say, I was furious. I loaded the songs back in but recreating the playlists takes a lot of time and I don't want this to happen again. I wonder if this message had anything to do with that fiasco. Any ideas?
I started getting this at the same time. Must be something on their end. It's all still working though which is weird.
Similar Messages
-
Keep getting this error message about inbox when opening Thunderbird
current operation of Thunderbird did not succeed. The mail server....... ( then message cuts off)
At this point I think you should get Applejack...
http://sourceforge.net/projects/applejack/
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
Do not try to run in Terminal from the GUI. -
I keep getting this error message "The iTunes Library file cannot be saved. An unknown error occurred (-50)" I'm not at all technical, so a simple response would be appreciated. I have already downlaoded the latest iTunes software and reinstalled it but the problem remains and I am unable to add additonal music to my library.
make sure the media folder in iTunes > Preferences > Advanced is not blank or out side of your c dirve
-
I keep getting this error message: Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
How do I remedy this so it starts backing up again?Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
Stefan -
I have my iTunes on a Windows XP operating system. My iTunes Library is stored on a external hard drive(H) with a desktop shortcut on the C drive pointing to the H drive where the iTunes LIbrary is located. I have it set up so that when I click the iTunes desktop shortcut it routes to the H drive and retrieves my iTunes Library from there. I've had a hard drive crash before and lost all of my iTunes Library.
So, if all of that makes any sense, I got a new desktop computer with Windows 7 Operating System and went online and downloaded the most recent iTunes softwear. I then attached the external hard drive from my old Windows XP system to the new Windows 7 Sytem. I routed it the same way I had it on the old system, but i keep getting this error message- "The file *iTunes Library.itl* cannot be read because it was created by a newer version of iTunes." To make matters worse, I tried to put the external hard drive back on my initial Windows XP Sytem and now its giving me the same error message. I know its alot to digest, but can anybody help me?????For general library squiffiness following an upgrade or crash the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these andcopy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
PS There is also a new iTunes build to download today, so might be worth getting that. A new iTunes should always load an older library file.
tt2 -
I am having trouble reinstalling my Itunes on my desktop which uses Windows 7 and I can download it but once it's complete i keep getting this error message...The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Please help me.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have downloaded Adobe Photoshop digitally but when I activated adobe I keep getting this error message Adobe Premiere.exe - NO DISK - There is no disk in the drive. Please insert a disk into drive/device/harddisk/DR1
It sounds like you downloaded the wrong application, namely Adobe Premiere Elements.
If you meant Adobe Photoshop Elements, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content
If you mean Photoshop proper, since you are posting in the Photoshop forum, give version details and your system specs.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I keep getting this error message when I (right-click) on a photo file on my desktop to burn to a CD. I don't understand this code...does anyone? Thanks Ariel**: The disc can’t be burned because an unexpected error occurred (error code 0x80020000).
I tried every obvious solution to this problem with different types of disc (-R; +R; -RW and +RW) and the problem persisted. Then I read about removing a hyphen in picture filenames. I renamed all the images and bingo there were no further problems. Apple should have solved this by now. This error code has been reported for several years and my MacBook Pro is quite new. Anyway, I hope this helps. It does work.
Piggywiggle -
I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR, -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?
See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2 -
My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd. -
I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
ipod sync problems
ipod 2.2.1 touch OS10.6.8 itunes 10.6.1
The photos sync but the calendars and contents will not. I keep getting this error message...
«iTunes could not sync information to the iPod «name of iPod» because a sync session could not be started.»Greetings,
See this post: https://discussions.apple.com/message/12799057#12799057
Cheers. -
Hi,
I am trying to download the latest 10.0 itunes, however I keep getting this error message. I have a new iphone 4s so when I plugged it into the laptop it said i need to uninstall and reinstall the latest itunes.
I contacted support which they advised me to uninstall the itunes on my dell laptop, which I have done however I keep getting the same error message. "An error occured during the assembly "Microsoft VC80.CRT, version =8.0.50727.4053",type ="win32",publickey Tokens="1fc8b3b9a1e18e3b",process orArchitecture="x86". Please refer to help and support for more information. HRESULT: 0x800736FD.
Please can you advise on what best to do? The laptop is a 32bit windows 7.HRESULT: 0x800736FD.
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736fd, or some other number? (If they're another number, what number are you getting?)
Maybe you are looking for
-
How do I get iCloud settings to accept new payment info?
Last evening at 6:54 I received this notification: On 09/30/2014, we attempted to charge your account for your 20 GB iCloud storage plan, but there is still a problem with your payment information. "No problem," I said to myself, "that's the card we
-
Hi, I have 3 Queries, each has same variable name (Calendar Date). Also I created 3 views with same selection as input. Now Created one WAD and assigned these 3 views in different cells. In WAD property I have disabled the variable screen display opt
-
why would i buy an apple tv when i can just get a dvi to hdmi converter and use my tv as a monitor?
-
Hello Gurus. we have Work flow for Purchase order release strategy. Now in our customisation we have change the Agent id name. But work flow do not send any SAP Email to that Newly Agent id. Workflow works fine before changes in Customisation. i am
-
What happened with this last update ? C'mon! Apple ! All pages are just gone...crashes every single day. Im shocked. Any ideas how to sort this out ??? Thanks