Keep Getting this message when trying to update library.

"Only one library can be matched at a time.  If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead"
I've only got one computer.
anyone else having this issue?
Advise?
Thanks.

Hi,
You can get this message when the match process has been interrupted. It still thinks that you are trying to update match. As you only have one computer, you can safely select match this computer.
Jim

Similar Messages

  • HT201210 i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

    i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

    i have done that
    same result
    the phone has a sim in it that is not active. does this cause the fault in question?

  • I keep getting this message when trying to update to Itunes 10.5 "Errors occurred while installing the updates. If the problem persists, choose Tools Download Only and try installing manually".

    I tried going to Apples site and installing it manually and that leads to me getting the same error message. Please any help would be appreciated.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I keep getting this message when trying to update apps:

    "You can not update this software since you have not owned the major version of this software."
    I have purchased the apps, so it is incorrect. However, I have two accounts (not because I want two, mind you, but because Apply refuses to combine two accidental accounts) and I'm wondering if this is yet another problem stemming from having two accounts on the same computer. Any help? Suggestions?

    if you are outside of the us, try
    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume.

    Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume. tried everything.

    Pondini's Time Machine FAQ for help with TM problems.  Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM.  See also Mac 101- Time Machine.
    Time Machine- Troubleshooting backup issues

  • I keep getting this message when trying to watch TV or filmsThis content requires Adobe Flash Player, which is not supported by your device

    I keep getting this message when trying to watch TV or films
    This content requires Adobe Flash Player, which is not supported by your device
    Is there an app that will play this. I can't find one....

    Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
    Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news and media sites, have their own apps in the App Store.
    If you do a search on this forum you will find hundreds of other threads on the subject.

  • Why do i keep getting this message when trying to view a movie: The shared library "iCloud Purchases" is not accepting connections at this time. Please try again later.

    why do i keep getting this message when trying to view a movie: The shared library “iCloud Purchases” is not accepting connections at this time. Please try again later.

    Same issue. What are they doing?
    Macbook Pro Retina Yosemite 10.10.2

  • There was an error installing this update. Please quit and try again later. Error Code: U44M1I210  I keep getting this error when trying to update

    There was an error installing this update. Please quit and try again later. Error Code: U44M1I210  I keep getting this error when trying to update

    Hi,
    You can visit Error U44M1I210 | Install updates and see if it works.
    Regards
    Kishan

  • HT1926 apple mobile device failed to start ? i keep getting this message when trying to install itunes program.

    I am trying to install itunes as i had to uninstall the software. and now when i try to reinstall it i keep getting this message. I dont understand why? or how to fix it. It shouldnt be this difficult to install a program. All this just because of some upgrade that wouldnt install and messed up itunes and made it invalid to even open.

    Hey AndreaKK,
    I would try the following directions:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you have Windows XP, there are slightly different directions in here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • I keep getting this message when trying to view iphoto:  your library is unreadable or damaged.  how can i get into viewing my library?

    I keep getting this message.  How can I view my photos?

    Have you tried restoring from your back up?
    If that's not possible:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD

  • HT201210 keep getting error message when trying to update iOS to 5.1.1

    I have had no trouble updating the several iPads under my charge at work, however can't update my own.  Am using iOS 5.1 currently on original iPad.  I go to settings and it looks for any updates available and I click install to 5.1.1 but keep getting error message saying there was an error when trying to update.  I am on my home wifi on my iPad.  Have done same procedure with about 5 other iPads with no trouble. What can I do?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • Why do I keep getting error message when trying to update iPad with ios7?

    Keep getting error message ios7 won't validate? Can I reset iPad and download again? Will I lose data on iPad if reset?

    NMAYO,
    In your project view can you right click on the chassis in the cRIO and make sure that it is set for Scan Mode and not FPGA mode? Also, In the measurement and automation explorer you can check the cRIO and verify that it has Scan Engine Support installed on it. The tutorial below shows how to reformat a cRIO and install software on it, the later steps on software will allow you to check your cRIO.
    Reformatting a CompactRIO Real-Time Embedded Controller
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • I keep getting this message when trying to sign into itunes... "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later."

    I have tried everything I can find online.
    Update iTunes to the latest version.
    If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
    Try the steps to troubleshoot iTunes Store connectivity in Windows.
    As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
    Try disabling any proxies built-in to Wndows. You should avoid proxies because they can cause issues.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    I also have tried flushing dns,making sure all services that are required are started (not 100% which it needs to be fair, I did have an issue earlier this month when i upgraded my ram from 2gb to 4gb and had to go into msconfig to untick the max memory setting so it used all 4 instead of the original 2gb... and that for some reason turned off a few services, bonjour service is 100% working, i checked that much, and the ipod service too) I also tried a system restore with no effect.
    I also did the microsoft fixit for the hosts file too...
    I have just purchased an ipad mini, brand new not second hand... and I want to be able to sync it, but without authorising the pc it wont let me. ANY help is appretiated. Thankyou.

    This is from run diagnostics...
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard SG3-320UK
    iTunes 11.1.2.32
    QuickTime 6.3
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0021BA400B6F5880
    Current user is not an administrator.
    The current local date and time is 2013-11-04 17:27:31.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Advanced Micro Devices, Inc., ATI Radeon 3000 Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {29F59A15-D9E9-49E7-92D5-D80B98E8742A}
    Description:    Anchorfree HSS Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 00:00:00 1970
    Lease Expires:    Thu Jan 01 00:00:00 1970
    DNS Servers:   
    Adapter Name:    {8B9D0C75-60FF-4AF7-9BEF-32BE5FFF1682}
    Description:    802.11 USB Wireless LAN Card
    IP Address:    192.168.1.102
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Mon Nov 04 10:12:31 2013
    Lease Expires:    Tue Nov 05 10:12:31 2013
    DNS Servers:    192.168.1.1
    Adapter Name:    {EEC08A58-390F-46BC-B61E-E523E6364ECB}
    Description:    Realtek PCIe FE Family Controller
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 00:00:00 1970
    Lease Expires:    Thu Jan 01 00:00:00 1970
    DNS Servers:   
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-11-04 17:20:24.
    **** Device Connectivity Tests ****
    iPodService 11.1.2.32 (x64) is currently running.
    iTunesHelper 11.1.2.32 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard OpenHCD USB Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    Thomas's iPad, iPad mini (Wi-Fi) running firmware version 7.0.3
    Serial Number:    F4KL3YDJF193
    **** Device Sync Tests ****
    Sync tests completed successfully.

  • Keep getting this message when trying to connect to internet

    Hi,
    I recently changed my WIFI security to WPA2 and now every time I try to connect to the internet I have to reselect my network and this message appears.
    There seems to be no way of getting rid of the message and every time the laptop goes to sleep or starts up I have to do this every time.
    Please help!

    Delete the network from the preferred list by following these instructions. Then add it again.

  • HT4623 Keep getting error message when trying to update to ios6

    Every time I try to update my 4s or iPad 3 to ios6 I get an error MSG

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

Maybe you are looking for