Keep getting 'Well that's Embarassing" message starting previous session, I do not want to start previous session, I always want new session. Need an option for this.

Keep getting "Well that's Embarrassing" message starting previous session. I do not want to start previous session. I always want a new session. Need an option to always start a new session.

Both of the above cited options help ONLY if "sites to be restored" ''are listed''.
They used to be(when I first switched to Firefox); now they are not(even with the "Oops! This is embarassing..." message from FF where the "Restore Session" option is shown but with nothing IN it, y'see?).
I've been going through the FAQs &c in the Mozilla Support sites/linx. Lots of interesting things but not quite that for which I search.
Open to suggestions, I remain, ~=DVexedVixen

Similar Messages

  • I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

    I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
    Kris

    It means your file is too large to fit on a single layer disk.
    Recompress to keep the overall size (audio,video and menus) below 4.5GB
    x

  • Am trying to download 6.0.1 after a crash, i keep getting told that there is no digital signature,so it will not load.

    this happened after a crash and every thing frooze on the unit. firefox would not work after startup. deleated it and tried to upload 6.1.was told it had a corrupt file in it. ran checkdisk,it found and corrected a bad fite and now i an told that there is no signature on the down load

    And they do offer a compatible version. As I am running running Netflix on my first generation iPad just fine.
    You'll need to first "purchase" the non compatible version  either on a newer device that can run it or on a computer running iTunes using the Apple ID that is on the first Gen iPad.
    After that is done, you should be able to go into the App Store App, and find Netflix under the Purchased Tab. Tap on it to download it and you should be warned its not compatible, but will be offered the compatible version.
    App Store: Install the latest compatible version of an app
    http://support.apple.com/kb/ht5919

  • My iTunes parent control keeps giving me the same error message. "Parent control preferences could not be unlocked. You may need to reinstall iTunes. "I have uninstalled ant reinstalled iTunes that 4 time now and I still can't get on. Can anyone help?

    My iTunes parent control keeps giving me the same error message. “Parent control preferences could not be unlocked. You may need to reinstall iTunes. “I have uninstalled ant reinstalled iTunes that 4 time now and I still can’t get on. Can anyone help?

    Experimental advice ... but, plausibly, the preference files containing the parental control setting may be damaged. If so, removing the iTunes preference files may help.
    For the basic technique, see the "Remove iTunes preference files" section from the "User-specific troubleshooting" section of the following document:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    To see those folders, you'll need to first set your PC to view hidden files and folders
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Prior to doing the preference file rebuilds: Best to make a note of any custom preferences you have set up for your iTunes. (Rebuilding pref files returns preferences to their defaults ... so you'll likely have to set some of those custom preferences up again from scratch.) Also make a note of any third-party plugins/add-ons you have installed. You may have to reinstall those after the rebuilds.
    Things to watch out for during the rebuilds
    Rebuilding the preference files in the \Local\ location causes the iTunes license agreement to run. So you'll need to agree to that again.
    Rebuilding the preference files in the \Roaming\ location causes the iTunes Setup Assistant to run. When prompted to do so, do not add files to your iTunes library. (Otherwise you'll end up with a library full of duplicates.)

  • I Just updated my iPhone 4 tp 7.1 oS. I am unable to connet to any network. I keep getting the "searching" Np Service" messages on the top let corner of the screen. I also get a notice that say " "unable to load network list. I need help...

    I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • Keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional

    keep getting unable to load metafile message when trying to download adobe reader x

    thank you that worked now I am having the same problem trying to download adobe flash
          From: Pat Willener <[email protected]>
    To: robert hunnell <[email protected]>
    Sent: Wednesday, January 21, 2015 12:13 AM
    Subject:  keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional
    keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional
    created by Pat Willener in Adobe Reader - View the full discussionYou are getting this message while downloading or installing ? If it's during the install, try the offline installer from http://get.adobe.com/reader/enterprise/ If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7116186#7116186 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7116186#7116186 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

    When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

    I think I've solved my problem with a Google Search. I came across a free slide show generator
    (contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
    You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
    I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
    I'm used to seeing.
    I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
    image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
    iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
    on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
    viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
    The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
    think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
    before.
    http://blyt.net/phxslides/
    Message was edited by: Jimbo2001

  • I keep getting banner that there is 8 apps to be updated, when i go to the App Store it says all app are updated, how do i get this to stop?

    i keep getting banner that there is 8 apps to be updated, when i go to the App Store it says all app are updated, how do i get this to stop?
    It seems that every time I start up the IPad the banner over ITunes shows 8 or more in the banner.  I have completly signed off of the ipad and it still comes up.  Any suggestions?  It seems to have coincided with IOS 7 being released, I have not downloaded IOS 7 to my IPad or my Iphone at this time.

    I"m not sure exactly what to do because once I got mine sorted out I can't exactly replicate it to test it, but it's like somehow your ID gets messed up.
    I tried to download an app, then Apple thought that I'd never bought anything from my device so went through the whole 'give your secret questions' thing and ended up having to call apple to get them to reset.
    Long story short,  the inability to update has something to do with the App Store not recognizing your device, even though part of it does recognize your device (which is why you get the little badges)
    You could try downloading a free app and see if you can verify your ID. Or you can poke around in here
    http://www.apple.com/support/appleid/
    and see if you can manage your account  and see if that helps.

  • HT5554 I have the iPhone 5 and I keep getting a no sim card message. I have had my phone for over a year now so I know I have a sim card. How can I fix this because it doesn't let me get calls now.

    I have the iPhone 5 and I keep getting a no sim card message. I have had my phone for over a year now so I know I have a sim card. How can I fix this because it doesn't let me get calls now.

    Try resetting the phone. Hold the home and power lock button until the Apple logo appears.If that does not work, turn the phone off and take the SIM out and then put it back in.
    If that still does not work, you may have a defective SIM, in which case you will need a new one from your carrier.

  • I keep getting told that i have run out of application memory and have to force quit applications. Not sure why this happens or what I do to fix it.

    I keep getting told that I have no more application memory and have to force quit applications. Why does this happen and how do I fix it? This issue has only started since I started using Mavericks 10.9.2.

    Have you checked how much space you have left on your HDD?  You may find some useful information here:
    pondini.org/OSX/DiskSpace.htmlhttp://
    Ciao.

  • Burning playlists from my iTunes to CD doesn't work anymore. Keep getting a "medium write error" message.  What does this mean?

    I'm trying to burn playlists onto a cd from itunes.  I keep getting a "medium write error" message.  What does this mean?  I heard that this may mean that I should try burning at a slower speed.  I tried this and that didn't help.  I also heard that I may need to use a different brand of CD-R disc.  I have not tried this yet.  I also heard that it could be a software issue or disc drive issue.  I recently updated my macbook pro software from tiger to snow leapord.  Do you think this could have affected my itunes playlist burning capabilities?  Thanks for the help.

    A system upgrade should not have affected anything. When did you notice the loss in functionality?
    Try different media.  2011 post on optical media - http://discussions.apple.com/thread.jspa?threadID=2754858&
    Apple Portables: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/HT1411
    Realize that a MBP that came with Tiger is an old computer and optical drives do not last forever.
    You could try a drive cleaning disc to remove dust.  Don't be overly optimistic. I suspect it is an old drive issue.

  • Using Google Chrome for Browsing, keep getting notice that Adobe Flash Player 10 is not responding ?

    Have been using Google Chrome with Windows XP Media addition, Hp Athalon. 3 gbs ram, rogers internet protection.  When browsing keep getting warning that Adobe Flash Player 10 is running slow and offered to shut it off so as not to cause further problems with computer.  Have looked for Flash Player 10 download on Adobe Site for Google Chrome, none available.  Did not initially download Flash Player 10 myself, just showed up.  Suggestions please.

    Hi, I understand. I think they were an older person not so familiar with computers and I was doing my best trying to get them to start their own thread. They have done that, so you shouldn't have any more posts to yours.
    Thanks,
    eidnolb

  • I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached.  This is making it nearly impossible to use the phone - please help!  So far,

    I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached.  This is making it nearly impossible to use the phone - please help!  So far, this website has only made things more difficult.

    The details you're providing are very helpful, Maj_Dad. With airplane mode enabled,
    there would be no message because that disables celluar data. I would recommend
    tying that mode with WiFi to see if it still happens. It sounds like this issue
    has something to do with one of the applications on the device.
    JoeL_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • TS1717 I keep getting an "unknown error -42408 message and it won't let me buy music?

    I keep getting an "unknown error-42408" message when I try to buy music - it then tells me to try again later, which I have done. 

    Hello suesq75,
    This error message indicates that there are one or more components of iTunes that are missing or damaged. Reinstalling iTunes should resolve the issue.
    iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3
    http://support.apple.com/kb/TS3258
    Symptoms
    If your iTunes is missing resources or encountering software conflicts, error -42404 or -42408 may appear when authenticating or downloading from the iTunes Store.
    Resolution
    Update to the latest version of iTunes.
    You can download the latest version of iTunes here.
    Note: iTunes 9.2.1 is the highest iTunes version available for Mac OS X v10.4. iTunes 10.6.3 is the highest iTunes version available for Mac OS X v10.5.
    Cheers,
    Allen

  • Keep getting false Mozilla Crash Reporter messages

    I keep getting false Mozilla Crash Reporter messages. I can just close them and continue on. When I get that message I can't open another Firefox window until I close that message. Can someone please help me?

    For today 8/20
    bp-2ae959bd-af39-4b83-80e0-279662110820
    bp-2ae959bd-af39-4b83-80e0-279662110820
    bp-12a9efd2-5b12-4e98-8bcc-4a8e12110820
    bp-3e920b20-fada-448f-b498-baa9d2110820
    bp-2bcb5ad7-6c27-47dc-84a5-cb49a2110820
    bp-7bc6bd4b-5ae8-43f1-bb91-fbc582110820
    bp-902acdbd-5452-407d-94d7-9cb182110820
    bp-a924868f-4984-43c6-9ab1-050992110820
    bp-d26ef87a-5ad2-4919-887a-f05b22110820
    bp-ba3be493-9908-4927-b95a-0de812110820
    bp-2d3238e8-4bff-4e5f-977d-b54232110820
    bp-1160ef30-95ee-48c2-bc87-fd9a82110820
    bp-a50763c1-8c2b-41ef-968b-b46cb2110820

Maybe you are looking for

  • Return zip file as soap attachment  from server..

    Dear Friends, Requirement: I would like to download a zip file from server(tomcat) with soap attachment using wsdl. I have tried googling but didn't get exact information and samples on this. Please help me on this and it would be helpful if u can pr

  • Fixing the SMTP server of localhost

    I have installed the role of the SMTP server in my VPS and it's okay as you see there is a red mark on. screenshot : prntscr .com/46tup6  (remove the space in the link between the "r" and ".", my account is not verified to post links) i want to fix t

  • Getting DDL for all oracle objects

    I am working to get the DDL for all the oracle objects within my schema. Some how I got the DDL but I can't got the comments associated with the oracle tables. Shall I know what I am missing in using dbms_package I am currently using ..? Below is the

  • Installing medium-cost RAM on my Mac Pro

    Hi everybody! I've just bought a 2x 2.66GHz Mac Pro and it's wonderful. However, I ordered it with a minimum configuration because I thought I could find expansion pieces on the market. Is there any problem if I install a 1GB-667-DDR2 RAM module non-

  • Smart Object - Cropping on a Layer via Select- Inverse- Backspace

    OK, I have learned that you can't "Crop" on a layer, but instead should use the Select->Inverse->Backspace procedure to essentially "crop" a photo.  But this procedure does not work on a Smart Object photo. I have also found out that if you Simplify