Keep losing cmptr(wndws 7) to printer (Hp Phtosmrt D110) connectivity.

Hp Photosmart D110 series all in one: We keep losing computer(windows 7) to printer connectivity. currently says "offline". We have reloaded the software countless times to get back "online" but then it eventually (1 wk maybe) just goes offline again. Please help?!

Similar Messages

Macbook keeps losing wireless link to HP printer

My Macbook links to HP printer wirelessly fine when its just started up but after time of not using printer Macbook loses wireless connection. In HP Utility software it gives error message ' looking for printer' or devicde not found.
I've followed HP troubleshooting guide and changed IP address to fixed rather than automatic setting as per guide but same problem.
Its really frustrating, I have to restart Macbook to reestablish wireless connection. Internet all works fine.
Any suggestions welcome.
Thanks
Steve

I have the same frustrating problem. It works every now and then, then it stops for no known reason! Can anyone else who has experienced this assist?
Thanks very much.

How can I get my Mountain Lion more stable on the internet? It keeps losing the signal. Lion is solid as a rock on my other Macbook using the same router.

I downloaded Mountain Lion on my Macbook Air, and it works without a hitch except for internet connectivity. It keeps losing the signal. My Macbook using the same connection is solid as a rock and never loses the connection. Is there something I can do? Since my Macbook works weell under exactly the same conditions and if memory serves so did my Macbook Air with Lion before I downloaded Mountain Lion, none of the usual fixes seem to apply.
Applehank

I have the same problem, I think. I dont lose wifi signal, the mba stays connected to the router the whole time. Pings also seem unaffected by this problem. The problem is that web pages seem to load intermittently, in other words, it loads a page in 2 minutes. It loads:
the first 25% in the first 5 seconds
the next 25% in the next 50 seconds
the next 25% in the next 5 seconds
the last 25% in the last 50 seconds
Its quite annoying considering this can be as simple a page as goolge search results or even google.com.
I thought it was my ISP and i even made a big racket about it, switched ISPs and I have the same problem.
With the previous ISP I had a cisco router. This new ISP supplied their own modem/wifi. That doesnt seem to be the problem.
Im thinking its a config issue on my mba. I have the latest updates to ML.
Any ideas?

Keep losing wireless signal

My 9300 keeps losing its wireless signal. I phoned and was told to connect to a different network and then connect back to Vodafone which worked for a couple of days but I keep losing and going to GSM and then have to connect to a different network and back to Vodafone.

I assume you are running OS X 10.5.5. Try these simple maintenance routines:
Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
Reset PRAM - hold down Option-Command-P-R keys when starting until you hear the startup chime a 2nd time.
Safe Mode Startup - hold down the Shift-key at startup until you see the login screen. When logged-in, then go to System Preferences/Network/AirPort, click on the 'Network Name:' roll-button, select 'Join Other Network...', enter 'Network Name and select the security type you are using, and finally, enter your Password and click 'Join'. Then, click the 'Apply' button and exit System Preferences.
How are you connected to the internet - DSL model > AEBn WAN port? Check your AEBn Internet setup. Open AirPort Utility, select your AEBn, Manual Setup, Internet - is 'Connection Sharing:' set to 'Off (Bridge Mode)' - set to this if not.
Now check System Preferences/Network/AirPort/ - click on 'Advanced', TCP/IP and confirm that 'Configure IPv4:' is set to 'Using DHCP'.
The above two paragraphs assume that your ISP uses a DHCP server to distribute IP addresses (normally the case).
Hope this helps.

I have set up my HP air print printer to my ipad 4 but it keeps losing it. When I try and print it says no air printer found.

I Have set up my HP air printer to my IPad 4. It keeps losing it. I am trying to print and it says no air printer found. Once I get it set up again and then don't use it for a while it has gone.

Have you tried ....
Rebooting your router? Unplug it for about 30 seconds and then plug it back in again.
Turn the printer off and then turn it back on again.
Check for a firmware update for the printer.
Reset Network Settings on the iPad. Settings>General>Reset>Reset Network Settings.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I keep losing my dock icon for the printer, can i lock in my dock icons

I keep losing my printer dock icon, why is this and can I somehow lock it in?

Right click, choose Options, choose Keep in Dock

I keep losing connection with my printer

I keep losing connection with my printer.

Can you provide more details?
- What kind of time capsule you are using?
- What kind of printer?
- How is the printer connected (Wifi, LAN, USB...)?

I keep losing my printers from the network

Yep. This has been going on since I did a full restore to my MacBook. I keep losing the connection to my two wireless printers. I go to print and and the printer que says that the printers are not connected. Then, amazingly enough, they get reconnected, sometimes by themselves and sometimes with me deleting and reinstalling.
BUT, when this happens I find that the other two computers on the network are not affected. So it seems an OS problem. (?)
I am using Time Capsule 2T for network.
Best,
Eric

they are downloaded through "media overdrive" and "media on demand", I am therefore assuming they are formated correctly. I am told that the problem is with the settings, but do not know which settings.

Time machine keeps losing backups

Time machine keeps losing backups on 10.8 machine.
I do Verify Backups or Enter Time Machine or Browse Other Time Machine Disks and all I can see is an older, concurrent machine.
While I can tell it to run a backup, and it will complete apparently successfully (and I'll be able to view it) the backups won't be there tomorrow. This makes Time Machine unusable at best.
What gives? Why are the backups vanishing?
WD MyBookLive
2010-mid MacBook Pro
This maching is also having trouble with scp, and other secure connections. But why would Time Machine report that it works, only to throw everything away?
Need help.
-Crissa

Triple-click anywhere in the line below to select it:
tmutil listbackups | awk -F/ '{print $NF}'
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

Deskjet 3520 keeps losing connection to Mac

Last night, I installed an HP Deskjet 3520 printer to use with my desktop Mac (which is using OS Yosemite). I have an etsy shop where I sell prints of my illustrations, so I often have to print out multiple files in a row. When I installed the driver last night, I was able to wirelessly print the test page, but after that, I could not print wirelessly. Instead, I used the USB connection, which worked fine. I printed a round of prints and everything worked fine.
This morning, I need to do some more printing, and my Mac reported that there was no connection to the printer (even though the printer was connected via USB). I deleted the printer from my Systems Preferences Printers and re-added it, and I was finally able to do my printing (still not wirelessly).
Now, tonight, I have tried to do more printing and the Mac reports that there is no connection to the printer, USB or wireless. I tried deleting from Systems Preferences and re-adding again, but that didn't work this time. Then, I tried resetting the printing system, uninstalling HP, and re-installing the driver. Now, I'm at the part of the installer where the device needs to be configured and I am receiving the message:
Device Not Reachable. The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
I don't know what keeps going wrong! The little screen on my printer says it is connected to my wireless network AND I am still connected via USB so I don't know how the device would not be reachable. I also don't know why the printer would keep losing connection with the computer every time I need to start printing again. Please help!!

Hi @tylertot
This is in deed a little strange, but I'd like to help! Some of the steps I am going to offer are steps you have done, but I;d like to perform the following steps in the order presented to see what happens. Please give the following a try;
Leave the printer on and unplug the power cable, also unplug the USB cable. Restart teh Mac and then plug the printer power cable back in. You can also go ahead and reconnect the USB cable.
Reset Printing System - (I know you did this already, thus you know how, but here are the steps for others who may view this thread)
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions - I don't see that you have tried this yet, and this step might be crucial to resolving the issue.
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver. You can add the wireless or the USB, or Both. If you ad both, I suggest adding a name to identify one connection from the other.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
You can see in the image above where the name section is, if you add both connection types simply add USB to the beginning of one of the names.
Adding both printers and naming them to help identify them helps when it comes time to print. When you print something you can choose the printer with the appropriate connection type. For example, you can choose the wireless driver ad if you get an offline message try printing again but choose the USB driver. If the USB one works you will know the issue is related to the Wireless connection, and if it doesn;t then the issue is related tot he operating system. Really this is just a proactive troubleshooting attempt in case issue arise in the near future. If you only want to add one connection type that is okay too.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Why mi ipad keeps losing wifi

SInce i udated to ios8 my ipad mini keeps losing wifi, it's not my mdem/router because my old ipod works fine and every other non apple
devise

It is possible that your printer or your iPad is on the fringe of your wifi router's range. You should be able to check the signal strength on the printer.

I keep losing my connection from iMac to keyboard and mouse any help please

I keep losing connection between imac and my mouse and key board.I then have to power off and reboot to get connection can anyone help please!!!!

Hi
Update date for anyone who ha suffered with the problem of losing connection to an ext HDD.
For me, the solution appears to have been achieved by making use of my old 802.11 b&g Airport Extreme base station and my new 802.11 n Airport Extreme Base Station.
My network is now setup as follows:-
Airport 802.11 n - 5GHz
Macbook Black
Apple TV
Time Capsule
Airport Express Base Station
Airport 802.11 b&g - 2.4GHz
Playstation 3
Xbox 360 Elite
Nintendo Wii
iPhones
iPod Touch
Canon Wi-fi Printer
iMac G5
Sony VAIO TX2P
I connect my ADSL line to both AEBS by ethernet, changed the settings and this has dramatically improved my connection reliability and speed when streaming movies and/or music.
Through trial & error, I have also discovered that the other problems that I have are connected to situations when restart my Macbook after a shut down or restart and my iPhone is connected. This causes iTunes to start up but due to the restart, the ext HDD is not ready and therefore, ITunes opens its local library - I now just try to remember to use the Option key to choose the library. Finally, if the laptop just runs out of juice, the ext HDD doesn't have the chance to have a friendly handshake before losing its connection. When I restart, the connection does to the HDD fails and I have to restart AEBS
I hope that helps anyone with similar problems or who wants to make the most of their fast 802.11n equipment by making is use of that kit that was maybe considered redundant - by creating a dual frequency network that maximizes speeds on 802.11 n whilst allowing use of the legacy 802.11 b&g devices.

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

Problem with ARD3 keeps losing the cursor

I am having problems with ARD3 whereby I keep losing the cursor when controlling another machine. The cursor is still there but you have to click-drag to see it moving. There was a similar problem a few months ago after a system update and pre ARD 3.1. I used to be able to upload the ARD client and that would solve the problem temporarily. But now that won't even work.
Another thing I notice when that happens is that my "Hidden Dock" stops appearing unless I click in the area. That also happens with my menus. And Expose stops working too.
The only way to get around the problem, is to either restart the computer or leave it for anything up to 1 hr, then it will be fine again.
Does anyone have the same problem?
I use a MacBook Pro DC 2G with 2G of RAM. 10.4.9 and all the latest System Updates including Security Update 2007-04. This started happening even before the 2007-004 security update.
MacBook Pro DualCore 2G Mac OS X (10.4.9)

I find that this happens only if a tool tip comes up after having it over an item in the toolbar however clicking in the remote computer's windows somewhere will bring the cursor back. Additionally switching windows, to say the main ARD window, and then back again will restore it as well.

HT4356 I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer avail

I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer available. My MacBook continues to print ok. Any ideas?

Reboot everything. Router, printer and pad. If it used to work, it will again. It just lost itself somewhere.

Keep losing cmptr(wndws 7) to printer (Hp Phtosmrt D110) connectivity.

Similar Messages

Maybe you are looking for